Clicking noise when playing back trtacks burnt to a cd

Hi
Have purchased an album from Itunes ans burnt it to a cd. When I play back on my music centre I get a clicking noise / interference, but its fine if I just play it back on my computer within Itunes.
Anyone else had the same problem?

Usually that clicking noise comes from burning audio CDs at too high of a burn speed which results in too many errors being layed down, more than the build in error correction algorythm of audio CD players can keep up with.
So try it again but this time do not pick the fastest speed or "best" but instead manually pick something around 8x or lower and see if you get a better burn.
Patrick

Similar Messages

Clicking noise when playing rented movie on apple tv

I am having trouble with my apple tv making a clicking noise when playing a rented movie from the iTunes store. Any suggestions?

I get noise, krackering/clicking noise in left channel on rented movies, music/movies played through iTunes. NOT on Netflix. Only Apple content.
Connected to a Samsung TV via HDMI.
Very anoying.
Any ideas?

Cannot get rid of popping clicking noise when playing music ,HELP! PLEASE

hi, for perhaps the past few monthes, itunes has been creating loud and obnoxious popping and clicking noises every few seconds while playing music on EVERY song. i know its itunes because i have played songs on other media players and they work fine.ive tried the the QT 7 version of the waveout trick. ive tried uninstalling and reinstalling it numerous times, and trying older versions, however i can't go that far back in versions due to my somewhat new ipod holding me back (which btw, music works fine on that).If it were up to me id go and use a whole other media player but a good amount of my music has been bought or ripped in itunes codec. im out of luck and frankly its driving me crazy, please help.

Project settings -> Metronome -> Turn off 'click while recording' at the bottom of that page

Clicking noise when playing MP3 tracks.

This faint clicking noise started today in FCE 4.0.1 I have read some bits online about perhaps the CD's were old and that was the reason when I transferred the songs into MP3 to drag into my video clip. I have played the songs on iTunes and there is no clicking noise. Also I have music in my iTunes that I got off the internet and it works fine too in iTunes, but starts the clicking when in FCE.
Also I have gone to other works I have created on FCE in the past and I have the same problems with the sound that I never use to have.
Anyone have any ideas?

FWIW, no version of FCP or FCE has ever worked natively with the MP3 audio format or even with AIFF audio at 44.1khz (CD Audio sampling rate). This has been well documented in the User's Manual since version 1.0. While you can import non-native audio, it will require rendering to play properly. But even with rendering, MP3 files can often exhibit clicking and other abnormalities.
-DH

Audio Clicking and broken up when playing back from timeline

Can anyone please give me some advice about a possible solution to a continuing audio problem I am having when using the Tascam Fireone with Final Cut Pro 5.1.4. (Fireone working well with Logic 7 on the same machine)
The Symptoms are as follow:
When playing back edited clips or music from the timeline there are constant ugly pops and clicks.
Any audio or video and audio even with differing sample rates when played in the source monitor are unaffected and play perfectly.
I have tried everything I know and am now at a total loss as to what to try next.
Tascam's so called support ignore any communication from me about it, as do most people on this forum.
Any suggestions welcome.
Thank you

I think it is a driver issue between Tascam and Apple Firewire connections
It's all very frustrating as Tascam just do not respond to support questions well.
Thanks for your comments, it's back to the drawing board with the Fireone and Final Cut Pro, a great shame because it's cheap and very good with Logic.

I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

Clicking sounds from an iPod that has a hard drive for storage is not a good thing. It usually means the hard drive is faulty. That is the likely reason for getting an error during the attempt to Restore.
If you use a Mac, you can try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility. Does the iPod appear in the Disk Utility sidebar? If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one). Go to the Erase tab. Set the Format to Mac OS Extended (Journaled). Name does not matter. Click on Security Options and choose to write a single pass of zeros over the entire disk. This serves as a good "stress test" for the iPod's hard drive. Back on the main window, click Erase.
This takes longer than a regular erase, but you should see steady progress. If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

When playing back stills, how do I turn off the G..D...n zoom?

When playing back stills in imovie, how do I turn off the G..D...n zoom? I just want it to show stills, STILL, zoom-effects do not go well with a serie of meditative fotos of sculptures.... thank you. Anyone?

Hi
It's called Ken-Burns effect.
Click on one photo in Project.
Then You see a small cogg wheel like symbol
- click on it and a menu opens where at bottom You can
- select Crop/Ken-Burns/Rotation - select it
Now in Viewer/Canvas at top set Size (Adjusted) from Adjust/Crop/Ken Burns menu - now the picture will show in full and no zoom.
As You see - there is a linguistic barrier when not having an English version of iM.
Yours Bengt W

Premiere Pro CC 2014 crashing when playing back especially when playing back graphics.

I updated Premiere Pro to CC 2014 last week and found it crashing a lot when playing back especially when playing back graphics. Has anyone else had this problem?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Picture breakup when playing back recordings of HD...

As above really, only noticed this since the latest software change but my be coincidental.
I have recently had picture breakup when playing back reordings on BBC1HD and Ch4HD, when I watch the channels live there is no evidence of the breakup and if I check the signal strength on both channels I am getting Signal strength of 78% and quality of 100%
Anybody else experience this or have any suggestions for solutions please?
Thanks

I think that is what he is saying Alex...
If you think about what I tested, the model seems pretty right... Delete the room, it does not delete the file from webdav... So, when the room is re-created, it will play back original content so looks like they are not storing room historical data, i.e. is there a recording, how long etc....
I think it is an great solution to be able to remove completed rooms and FMS pick the old room up from webdav on the fly. Seems the most logical option.
Nigel, I don't suppose there is any solution of sending the recording to Amazon S3 or other cloud resources rather than the webdav folder? I think, for those with thousands of recordings, storage could become an issue... I have looked at the possibility of mapping my box to the S3 bucket but then I am reteiving it to send it to you every time a file is requested which could cause bandwidth issues...
Maybe integrating some sort of API where when setting up the recording, we provide specifics (i.e. an authentication token), to allow the file to be placed there? Or maybe a slightly different approach would be to provide a cloud front url for picking up the files and the transfer could go on behind the scenes.... Also with the cloud front, distribution would be much quicker as the files could end up closer to the location of the FMS which in turn would create a richer experience with less waiting...
Anyway, maybe you can advise.
Thanks for your time.
Marc

My "older" songs stutter when played back

my pc is only 6 months old, but the first songs i downloaded from the itunes store
"stutter" when played back. they don't stutter on my ipod, and the more recenlty
downloaded songs are also ok. i have deleted them, reloaded from the ipod, updated
itunes, all to no avail. any ideas?

First a correction. I am using the latest version of FCP – 5.
Regarding the encoding, I have tried going from native HDV MPEG-2 to H.264 at 720P from 10 to 4 MB at 24, 30 and 29.97. The Mac seems to play everything back very well, but most PCs (the latest IBM T 40 – 43 series laptops) a couple of Dell desk tops (2.6 GHZ with 64 and 128 MB graphic cards) and a 3.2 GHz Shuttle PC with a 128 MB graphic card (that we routinely use to decode four MPEG-4, 4CIF images simultaneously and display on a 42” ED Plasma) choke/stutter to varying degrees with processor utilization hitting 100%.
So, the real issue here is what is the difference between a 720p trailer that I can download from Apple and what I can output using Compressor 2 at a similar data rate – other than the frame rate?
And why does the Compressor output stutter on most PCs?

My iMac makes strange clicking noises on the back of it

It makes some random clicking noises on the back of my iMac that just irritates me alot. What is wrong with it? I purchased it like 2 months ago and I don't think it's a virus or anything. Can anyone help?
Thank you

Hello:
I suggest you take the computer in for diagnosis. Strange noises are not normal.
Incidentally, there are NO viruses that affect a Mac running OS X - NONE.
Barry

"Dropped Frames on Playback" - when playing back FCP's Bars+tone

We've been having a problems with one of our edit suites dropping frames when playing back to tape (Edit to tape).
In checking it out, I created a new project and added DCP's PAL Bars and tone to the default sequence. FCP is stopping playback with the "Dropped Frames on Playback" error after 13"-15". I've tried all the usual stuff - trashing FCP prefs, zapping PRAM, repairing preferences etc.
Has anyone any further suggestions??
RT is set to Safe, with dynamic frame rate and video quality.
The Mac is a Dual 2.66GHz Dual Core Xeon, 4Gb RAM, with an AJA kona lhe card, connected to an XServe Raid via fibre. The tape deck is a DigiBeta M2000.
I've read all the posts I could find, and checked Shane's stock answer #12.
Cheers
Steve

Try creating a new user, log into that and test FCP.
In my case, a new user worked, for awhile.
Through a lot of trial and error and a reinstallation that was ineffectual - properly surmised by a very learned friend of mine, Mr. Sheffield - I found a project to be corrupt. So thoroughly corrupt that it would corrupt FCP and any projects opened downstream which is why my new user worked for awhile. Took me some time to figure out the proper order to open things after a system restart. Looks like I'll be doing a rebuild of the project through xml which shouldn't take to long.
In your case, if a new user doesn't help and you go the reinstallation route, uninstall FC Studio with this jewel of a utility. Many thanks to Jon for writing and distributing. http://www.digitalrebellion.com/blog/posts/fcsremover_1.0.6released.html
Zeb

My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

Ipod mini 2nd gen: clicking noise when plugged in only

My mini just makes clicking noises when I plug it into the usb port. I thought it was the hard drive after reading tons of posts about the clicking noise, and got a compact flash replacement but it is still clicking. I dont think it is the battery. If it was, it should hold some sort of charge shouldnt it?
What could be causing it?
Is my mini out of whack? I did drop it before it died 2 years ago, but it worked for quite a few months after dropping it though. I just got around to working on it now cuz I miss it.

thanks for the reply. well changing the hard drive was easy. it might be the battery. it did give me some errors before it crapped out. i just dont remember what those were. i think it was an apple with a lightning over it, which would indicate a bad battery i suppose. i will try to change the battery and see how that goes. i just cant troubleshoot since nothing comes on, except for a faint clicking noise when it's hooked up to the usb.

Clicking noise when playing back trtacks burnt to a cd

Similar Messages

Maybe you are looking for