Clicking noise when you press the volume controls ?

Hello !
Is there a way to turn off the anoying sound effects when you press the volume level keys ?
Thanks &
Take Care
Roy

Temporarily: Hold the Shift key while you press the volume controls.
OR
Permanently: Disable "Play feedback when volume is changed" in the Sound Effects tab of the Sound Control Panel.

Similar Messages

  • Will the Apple Store give me a replacement iPhone 6 the one i have now has a clicking noise when you press on the screen. I have only had it for about 8 weeks is it a manufacterin fault or what.

    My iPhone 6 has a clicking sound coming from the top left of the device as if its no aligned properly with the frame.
    Ive only had it for about 2 months, the iphone its self is in pristine condition no bumps or scrapes, in fact i treat it
    like a new born baby. Will the apple store give me a new replacement or i am wasting my time i have got a clue
    never had this or any problem before with iPhone's before. Its not something you want having paid £620 i live
    in the UK.

    If they determine the sound to be a manufacturing defect, then yes, they will replace your iPhone with a refurbished unit of identical specs. The replacement will have the same warranty as your original iPhone, for as long a time as what is left on your iPhone's warranty at the time of exchange.

  • My 6th gen ipod stopped playing and the screen went white. iIt won't respond except to make a tone when you press the volume buttons. None of the icons appear and it won't play

    Is it dead?

    Hey there ihscoutnut,
    I suggest that you try to use the troubleshooting steps in the following article to help you address this issue:
    Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
    https://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

    So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
    I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
    I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
    Please help!

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • The icon that appears when you change the volume is stuck on my phone.  how do i get it off my screen

    the icon that appears when you change the volume is stuck on my screen.  Can anyone help?

    Hi antdagreat601,
    Welcome to Apple Support Communities.
    If you haven't already, I'd first try restarting or resetting your iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your device
    Note: Reset your device only if you are unable to restart it.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If the volume icon doesn't go away, see our iPhone Troubleshooting Assistant for more help:
    http://www.apple.com/support/iphone/troubleshooting/
    Have a great day,
    Jeremy

  • Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Is there a way to keep the screen from lighting up every time an email comes in, but still be able to see the email on the lock screen when you press the home button?

    Is there a way to keep the screen from lighting up everytime an email comes in, but still be able to see the email on the lock screen when you press the home button?  This is killing my battery, but also is kinda the whole point of the notification center in my mind.

    This is something I've been wondering. I am a bit like you, I like being able to have a glance at emails or Facebook updates without having to log in, and I think it would be great to be able to turn off the notification switching the screen on, especially for emails as I do get a lot, and Facebook, but I somehow doubt it is possible.
    I am currently monitoring how much this eats up my battery charge. On a normal day, after an overnight charge, I would probably still have 30%-40% left when I leave work in the evening. Today, I was down to 48% by lunchtime, where I've usually got a good 60-70% left... Might have to turn email notifications off on lock screen until it's possible to have them appearing in the list without flashing me...

  • Help, my iPhone 5, I've turned it off and on and it has the same fault. What ever you press on the screen highlights with a box round it. When you press the round button with the square in the centre the voice on the phone tells you the time. Then the voi

    Help, my iphone 5 is locked and will not function! I've turned it off and on and it has the same fault. What ever you press on the screen highlights with a box round it. When you press the round button with the square in the centre the voice on the phone tells you the time. Then the voice says screen lock. If I try and unlock the phone the voice says phone unlock but you can't put the code in. If you hight the box it will say the number but not put the code in?! What's the crack?

    Quickly Triple tap the home button to de-activate VoiceOver.

  • Clicking sound when I press the top of screen near the front camera.

    I bought an iphone 6 plus 3 weeks ago and after I used 7days, I found when I press the top of screen, I can hear something like clicking. Then I contact Apple and sent it back. After 1 week, they returned it back and said there was no problem. After I received it, I didn't even activate it, just pressed, the sound was back. Not only this, they made a deep scratch on the left top of back. I was so angry and I contacted them again and took a video. They told me to send it to apple support again. And today, they emailed me, said this is a normal behavior for iphone 6 and 6 plus, I will receive it tomorrow. It really xxxxed me. What can I do now? No way to express replacement, no way to repair. Please help me out, guys!!!!!
    https://www.youtube.com/watch?v=A4JNYl2OcAg

    It is hard to tell from your description if you have a real defect. I would make an appointment at the Genius Bar of your local Apple store and discuss/show it to them.

  • My volume doesnt work and when i press the volume button it shows the headphones volume on the screen without any headphones being plugged in. what can i do to fix this?

    My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?

    Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it

  • I Pod Locks when i press the "Volume Up" Button

    Nothing happens when i press volume down except for turning down the volume, i have a feeling it might have of occurred while i was cleaning my i pod.
    Help Please!

    Yes I did reboot.
    And yes I can still adjust the sound on the menu bar.
    I also noticed that there is an eject symbol on my menubar which wasn't always there.
    And I don't really think it belongs there since I have a Macbook Air and thus no CD/DVD reader.
    +volume control keys on the noName bluetooth keyboard work.
    on that one the control keys are in no relation to the f-Keys
    Any other Idea what the Problem or maybe even the solution might be?

  • Click Noise when pasting from the same track

    Hi everyone, it happens that i want to extend a music track with itself. When i copy a region and then paste it at the end, in the transition it sounds like a stapler sound, and very hard sound. The thing is that the music is for relaxation and definitely it can´t sound like that. What can be happening and what can be done?
    Thanks a lot
    Shankara
    Note: I don´t know if i can insert an example of the noise here.

    When you say "tone jump" do you mean you can hear the change in the background noise of your recording?  If so, a few things for you:
    First, be scrupulously accurate when you record.  As far as possible, work in a room where the acoustics are controlled and the background level doesn't change.  If you can't control the room, a device called the "sE Reflexion Filter" used properly can really help but don't be tempted by cheaper imitations which just give you a boomy, boxy sound.  When recording, get a good, accurate level check, set the level then don't change things through the session.  Adjusting the record level also adjusts the background tone.
    Second, a trick used in film and other audio recording is to record a few minutes of the room atmosphere with no dialogue or other sounds going on, then put this in the background of the whole track behind all your edits.  It may seem counter intuitive but having a continuous room sound running in the background is quickly not noticed by the listener but helps cover changes when you edit.
    Third, go to Edit/Preferences/Data and make sure the two boxes related to smoothing transitions are ticked.  You can also play slightly with the durations these options default to.
    Fourth, try working in Multitrack View and do non destructive edits.  If you work there and overlap your clips slightly, Audition will do an automatic crossfade for you--you can configure the crossfade using the little box in the corner of the clip (the one with a diagonal line).   Using cross fades will help disguise your transitions.
    The reality is that getting the recording as near perfect as possible is the best bet, then using the other tricks I list to smooth things farther will be your best bet.
    However, if I've misread what your problem is, I've done a lot of typing for no reason!

  • My iPod keeps flashing white and making a noise when I press the button?

    Whenever I press the button, my iPod makes a strange clicking sound and the screen turns white for a few moments. It will not allow me access to the home menu or do anything else that requires the use of the button. I don't know what might have caused it, if it is repairable, or even what is causing the problem. Help??

    My ipod does the same thing. The white flashing is the ipod taking a picture of the screen you're on. I haven't found a permanent fix for it, but what I do when it happens is hold the home button down until it turns off then turn it back on.

  • Is it normal to see white lines when you press the home screen while it's charging?

    Hi, I have a brand new ipad mini and I'm noticing that while I'm charging it and it's in sleep mode, if I press the home screen button whitish/grey lines will appear on the bottom of the screen for a few seconds then fade away. Is normal when charging your ipad mini?

    No it is not.
    Are you sure that this isn't a phishing attack to get your password?
    Allan

Maybe you are looking for