Clicking record freezes up PPT

It wont' continue on. This used to bring up my sound check
utility, and then allowed me to start recording audio for the
slides I was on, but now it just freezes up my PPT and I have to do
a CTRL-ALT-Delete to shut down PPT and start over.
The rest of the audio controls work (Edit, Timing, etc.) but
I just can't get the Record option to work. Any ideas?
PS - I've already completely un-installed Presenter and
re-downloaded the new versions and patches...nothin...

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

Similar Messages

G50-70: empty DVD-drive clicking and freezing other drives for about 30 seconds all the time

Hello board. Big problem. Seem to be the only one having this after searching the board:
Brand new G50-70: When using OS from the SSD or using OS from the SSD and doing things with a USB-drive, the empty internal DVD-drive making clicking sound and sometimes freezing SSD read/write operation for about 30 seconds but all the time freezing USB-storage read/write operation for about 30 seconds.
When freezing there's always clicking. But when clicking there's not always freezing except when using USB-storage.
OS is Win81-64.
An example scenario: connect USB stick, open terminal, type diskpart, dvd-drive clicks and freezes opening of diskpart for about 30 seconds, then the same may or may not happen when entering commands like clear the stick and format the stick.
Any clues, why I have this issue? Thank you very much for reading.
Solved!
Go to Solution.

hi georg43,
it's possible that there's a software running on startup that's accessing the ODD when the machine is being used (especially if the ODD LED blinks when it's being accessed)..
To check, you can perform a clean boot to temporarily disable apps & services running on startup. If the machine functions properly on a clean boot, you will need to enable the startup services/programs that you have disabled in groups of two or three (trial and error) to find the culprit. You can start by enabling the lenovo services and apps first followed by the Intel ones and observe.
In addition, you can also try to disable the DVD-drive under device manager and observe.
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

ECC 6.0 , Java error when we click "Record Expense Receipts" on first page

Hi ,
We update from ECC5.0 to ECC6.0 , we can fill the first page of the T&E "Create Expense Report" when we click "Record Expense Receipts" the following Java error is displayed ?
Maybe somedody ran into the same issues . Thank you, any information will help .
    at com.sap.mw.jco.JCO$Record.getInt(JCO.java:13095)
    at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValueAsBoolean(JcoBaseTypeData.java:599)
    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getAttributeValueAsBoolean(DynamicRFCModelClass.java:287)
    at com.sap.xss.tra.model.common.Ptrm_Web_Customizing_Get_Output.getE_Jurcodes_External(Ptrm_Web_Customizing_Get_Output.java:2219)
    at com.sap.xss.tra.fc.customizing.wdp.IPublicFcTraCustomizing$ICustomizingGet_OutputElement.wdGetBoolean(IPublicFcTraCustomizing.java:5677)

Hello,
Please refer to the note "1076144 ESS trips and expenses: Migration from WD Java to WD ABAP" to check your setting.
Regards,
Raynard

Everything I click on freezes!

I have a Pavilion p6210y PC. On Sunday, my screen froze and left me no option but to turn off at case. It never booted properly again. I couldn't get into setup - would not boot from cd - occasionaly it began a CHKDSK, but never finished and froze. Since it wouldn't boot, assumed hard drive corrupted and replaced. Full system restore done on new HDD running Windows 7 Home Premium. All installed correctly, updates installed correctly, programs restored and in less than 24 hours same issues began. HDD light stays lit - no cycling sounds - all frozen - then it starts up again with a click - over and over. I can't run two processes at once - screen freezes & must turn off on case. I managed to run HP Diagnostics Tools and all hardward passed - Motherboard, Processor, Memory, HDD, etc. Product no longer under warranty and Microsoft says not their issue - Windows 7 reinstall would have addressed any issues with software. HP tech says in his opinion I need to install an external Graphics card and disable one on motherboard. Computer is 18 months old. Card installed is NVIDIA GeForce 91000. There is no diagnostic tool on HP to check it Has anyone else had this issue? Does this sound like the correct solution? I don't want to keep throwing money at this PC unless this sounds like a good solution. Any help at all greatly appreciated!
Edit: I am unable to download anything. In addition to the first post, I wanted to add that when I try to load IE or Google Chrome, I get a blank screen with "waiting for cache" along the bottom. VERY SLOWLY the page loads. When it finishes, anything I click on freezes the page - not the mouse - just the page. The mouse moves around, but anything I click on has no reaction. Someone suggested that I have a really bad virus running in the background that is using up a huge percentage thus not allowing anything else to run, but I have not found anything. However, as an experiment, since I had deleted the volume and reformatted the original HDD, I plugged it in, unplugged the new one, and tried a re-install of Windows 7. It stalled at 8% and froze, so I think we can eliminate a virus. Does this sound like a graphics card issue to anyone as HP tech suspects? I also got an error code after several restart attempts: 0xc00000e9 unexpected I/O error has occured. Anyone???

That computer has the infamous M2N78-LA motherboard. The NVidia controller is more than liklely overheating.
When it finally goes UP, it will jumps top booting.
PS> lengthy post has been made about the SATA and NVidia controller chip.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

My video-record freezes up when I try to record?

my video-record freezes up when I try to record?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

HD Clicking and Freezing

I know this has been discussed a million time but I still cannot find the info I need.
I've upgraded the HD on my MacBook Pro to a Seagate 500GB 7200 rpm (ST9500420AS) drive and it's won't stop clicking and freezing every few minutes. I know that Apple released some kind of upgrade to address this problem but when I tried to run it (after downloading it directly from the site) it says that there's nothing to do (I'm assuming its because I am not using an OEM drive?)
Anyone managed to resolve this issue?
Thanks

You might want to run S.M.A.R.T. Utility to be sure there's not a problem with the drive itself:
http://www.versiontracker.com/dyn/moreinfo/macosx/32454
You can download the demo and run it several times for free.
Even though you seem to have the drive without the G-Force technology, you might try disabling Apple's Sudden Motion sensor to see if this makes a difference.
http://support.apple.com/kb/HT1934
If it does make a difference, it may be that your drive actually has the G-Force technology, even though it isn't supposed to.
Good luck!

My classic has started clicking while freezing and now ita stuck on one screen and the wheel doesnt work

Clicking while freezing for a few seconds now its froze on one screen and wheel wont work

I know it sound silly but please try these steps, part of the 5Rs
Can you toggle the Hold switch and make sure, you can see the Red plastic.
Then Reset your iPod - Press the Menu and Center button for about 10 secs till the Apple logo comes ON, then release the buttons.
Good Luck!

How can I stop Pn 9 (Presenter) from freezing MS PPT 2013?

This is my first Presenter. If I leave the add-in in, it freezes PPT, won't open.

Hello,
Welcome to Adobe Support,
Could you confirm does it works when you unplug the LAN cable or disconnect the machine from your Internet. If it works , I would suggest you to white list these URL's on the proxy server with the help of your IT department.
• ccmdls.adobe.com:443
• ims-na1.adobelogin.com:443
• na1r.services.adobe.com:443
• prod-rel-ffc-ccm.oobesaas.adobe.com:443
• lm.licenses.adobe.com:443
• ccmdl.adobe.com:80
• swupmf.adobe.com:80
• swupdl.adobe.com:80
If in case you are facing an issue with your home machine. try uninstall , reinstall Adobe presenter and run PowerPoint as an admin. look for PowerPoint icon, right click on it , select Properties then go to compatibility ,under privilege level check Run this program as an administrator.
Let me know if you need any help.
Thanks & Regards,
Puspendra Yadav
Adobe support

Whenever I try to run 2-3 programs my computer stars clicking and freezing

I have a fairly new iMac G5, not the new iMac with front row and the camera. So whenever I try to use, for instance itunes, safari and ichat it will start to freeze then make this weird clicking noise and then unfreeze. Then a minute or so later it will freeze when I click on another web site or try to change the song or something. The computer has 1GB of ram a 250GB hard drive and a 2GHz processer. If anyone knows how to fix this problem please tell me. I would rather not go to the apple store.
iMac G5 Mac OS X (10.4.3) 1Gb ram 250Gb HD 2Ghz

I would suggest two things. First, download a utility like Cocktail, and run all the scripts.
Then download the Combo update and apply it over the delta that most users download through software update.
Then repair permissions in Cocktail again.
Hopefully that is all it takes, but be sure to post back here if it does not.

Folder icon, whirring sound, clicking noise, freezes, freezes itunes....

okay...my ipod (with the click wheel) is definitely messed up. a few months ago i accidentally dropped it, and it started having a sad face and then the folder icon. i took it to an apple store and they restored it for me. it started working fine and everything was hunky-dory...until a few weeks ago it happened again, except i didn't drop it this time! (i think it just did it to mess with me or something)...so anyways...i've tried all the stuff i can think of: recharging, resets, disk mode...but nothing seems to work! and don't tell me to hook it up to my computer because everytime i do that and try to open itunes, it freezes!!! so i can't even restore it...and when i try to go through "my computer" and click on the usb port for the ipod, it freezes...so i'm starting to think all is lost...and a new ipod is starting to sound pretty good, but i'm hoping i can save my $300 and fix this one....can anyone help me???

Hard drive upgrade services:
MCE Technologies
DT & T Computer Services
Sources for compatible drives:
Other World Computing
Newegg
Online instructions:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm

Clicking "Search" freezes InDesign CS6 (and also InDesign CC)

On a specific InDesign document, clicking "Search" immediately freezes InDesign. For several reasons this is an inacceptable malfunction.
After restarting InDesign offers recovering my file. Clicking OK opens the file again without any problems but my workarea appears in default view and needs to be set to my adjustments.
"Save as" produces a much lighter file with 47mb instead of former 117mb?! No cure, the bug stays with this copy.
Another phenomenon seems to be coherent to the search-malfunction:
When trying to generate an automated "table of contens" InDesign freezes again.
I am working on CS6 Design and Web Creative Suite on an iMac 27" mid 2011, 16gb RAM. OSX Mavericks.
I installed the font (Helvetica) and checked the file on my MacBook (Mavericks) on CS6. Same problem, no solution.
The used fontfile is checked and appears to be OK.
No other InDesign files are affected by this bug.
Opening the file in InDesign CC shows the same problem.
Did anyone face a similar problem and knows a solution for it?
Thank you in advance for any hint that solves my problem!
Peter

or you may use that CC on your computer as well:
http://forums.adobe.com/thread/1347241

Metronome click recorded onto audio track , can not separate during playbac

I set the metronome for "click during recording only" and for some reason the metronome clicks on this audio track during playback as well. I am recording an audio track from a Kurzweil 2500sx keyboard.
Please comment ?
David

Well just hit "c" to turn it off or look for the Metronome symbol in your transport window and turn it off there.
Maybe the Click was recorded onto the Kurzweill track when you recorded it into Logic?

C5-00 5 mp video recording freeze

i got my phone about 2 months ago. it worked fine for about a month, and then, just like that, it started to freeze in the middle of the recording for about 2-3 secs, then started rec ok, and agaian freezed for 2-3 secs and so on. After i downloaded the movie and played it, it played the same as the recording(with the freezed sections, but with sound).
I checked the sw version(the last one), i changed the card, i formatted it.
The problem(for now) is solved by taking down the recording quality, but i dont want this to be a permanent solution.
Anyone got a better one?
10x

I have exactly the same problem.
I will add that record to memory card and internal memory behaves the same way.
The only way is to reduce video quality which is already not very good.
I have just upgrade to the latest firmware 181.003. Nothing has changed.
Any ideas
UPD: The problem seems to be in memory fragmentation and slow access speed. Have to use more quality/speed memory card class 6 or higher.

Master Details form - button click records are vanishing

Developed One Custom Form, In the Master Block One Organization ID Column is there Based on ID, through LOV i am populating live level some data. it is working
fine.
In the Master Blokc based on Line level information I am doing calculations.
for that once Command Button Inserted. if i click the Command button
without changing Org ID it is working fine. if i changed to Some other organization id during
Entry. that time only records are vanishing. for other organization details in line level.
in the command button i am not referring organzation id.
begin
go_block('XX_JVG_BLEND_LINES');
first_record;
--           FND_MESSAGE.SET_STRING('inside 1');
          --FND_MESSAGE.SHOW;
          declare
          WEIGHTED_AVERAGE_ATOTAL NUMBER:=0;
BEGIN
     WHILE :XX_JVG_BLEND_LINES.MTL_SYSTEM_ITEMS_SEGMENT1 IS NOT NULL
loop
               --FND_MESSAGE.SET_STRING('inside loop');
                    --FND_MESSAGE.SHOW;
          DECLARE
               WEIGHTED_AVERAGE_A NUMBER:=0;
               WEIGHTED_AVERAGE_ALTOTAL NUMBER:=0;
          CURSOR
          C1
          IS
          SELECT NUMERIC_VALUE FROM XX_JVG_SYSTEM_PARAMETERS WHERE FIELD_NAME='LA'
               AND CHARACTER_VALUE = :XX_JVG_BLEND_LINES.A;
               BEGIN
               open c1;
               FETCH C1 INTO WEIGHTED_AVERAGE_A ;
                    WEIGHTED_AVERAGE_ALTOTAL:=(NVL(:XX_JVG_BLEND_LINES.ISSUE_QUNATITY_KG,0)*NVL(WEIGHTED_AVERAGE_A,0));
                    WEIGHTED_AVERAGE_ATOTAL := WEIGHTED_AVERAGE_ATOTAL+WEIGHTED_AVERAGE_ALTOTAL;
               close c1;
               end;
                         IF :System.Last_Record = 'TRUE' THEN
                              EXIT;
                         ELSE
               NEXT_RECORD;
          END IF;
          End LOOP;
this is my code
what are the possbilities.

bcz of post update trigger line level firing in another column
probled solved

Get thump noise when clicking record button of voice over iMovie 11

Hello,
When I try to record a voiceover in iMovie 11, the record button that I click to record does not load. There is a thump noise every time I click on it. The audio of my microphone is set to not too loud or soft and should work. I also do have a defined timeline as well. I want to record my voice and mute the sound that is already in the timeline. Do you have any suggestions as to what I should do to be able to record my voice in the movie?
I am not sure if my question has already been submitted to one of these online forums, and I apologize if it has. If it has, could you provide me the link?
Thanks,
Adam

The problem was no longer excist after the last iMovie updates.

Clicking record freezes up PPT

Similar Messages

Maybe you are looking for