Clicking Sound that Won't Turn Off
Earlier models made it so the clicking sound that occurs when you scroll hade more options that simply on and off. I want to turn the sound off in my headphones, but keep the internal speaker on. Any ideas?
Haha thats funny cuz i want them to only come out of the headphones so i dont disturb others when i click.
Or better yet, clicking through the headphones when nothing is playing.
Similar Messages
-
Clicking sound that won't go away
Please Help -
I downloaded the quicktime software that enables QT to read mpeg2 videos and when I rebooted the volume window/display appeared in the middle of the screen. Now it won't go away and there is never ending clicking sound that is coming out at full volume. Plus when I go to turn it down, it automatically goes back up to full volume.
I've booted and rebooted and nothing changes.
Doea anyone have any suggestionsOnly other thing I can think of would be to go into the Sound prefs/setup pane and disable the connection/signal to that device before sleeping the machine. If that works, then perhaps an AppleScript or Automator script could be written to facilitate doing that before sleep, and afterwards to re-enable it when needed.
If the Newmark device has an on/off switch, perhaps using it would be sufficient.
You might check the Numark website, see if they have a tech support area and if so, if there has been mention of a similar problem. If there is, a solution may be posted. -
i have tile floors and i dropped my ipod classic flat on its back while it was off. i tried turning it on after that and it now it makes a clicking sound and won't even turn on. all it shows is a dead ipod and told me to go to apple.com/support/ipod. i'm not sure how to fix it or if it's even fixable. or is it just cheaper to get a new one?
If the phone will not power on try these three things:
Connect it to your phone charger
Connect it to your computer and open up iTunes
Perform a hard reset (Hold down the sleep/wake (top) button at the same time as the home (circle) button for 45 seconds. When the apple appears on the screen let go of both buttons. -
When I was updating my ipod touch to the new iOS last night it died and now I have nothing but a white screen. iTunes no longer recongnizes the device and it won't turn off when I hold the power button or when I hold the power and home screen button.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How do I stop my MacBook Pro making sounds alerts like whizz, pop and buzz every time do something in an app.? I unchecked all the sound effect boxes in System preferences but that did nothing. They aren't sounds that appear on that list either. I have to keep the volume turned off instead.
I did migrate files and applications from my G4 powerbook running 10.3 Panther to the new MacBook Pro, would this have had any effect?
Any ideas?
Macbook Pro 2.16, G5 iMac Mac OS X (10.4.8) Logic Pro, Final Cut Studioapple store pointed out the alert volume slider is not the same as the play user sound effects check box and you need to turn it down as well as unchecking the box.
-
23" ACD with light dot that won't turn off
In the upper left corner (about 1 cm down and right of the blue apple) there is a light dot. It looks like an LED light that is shining through the screen from behind. This isn't a stuck pixel. When I run PiXel Check, the dot shows on red, green, blue, and white displays but not the black display. Putting the display to sleep doesn't help. And even turning off the computer does no good.
Any clues to what the problem may be and possible solutions? Love the ACD otherwise. Thanks!Hi Clyde,
I'm relieved to see someone with the same problem as me, in my case I have a small light spot on the bottom right hand of the screen. It almost looks as though my power light has started wandering on my screen, but that isn't the case. To my suprise, the light also disappeared on a black background! Did you find any solution to this problem? I'm considering getting it replaced (I'm pretty sure it's still in the 1-year warranty), considering its my monitor for at work... It's not a distraction yet, but it might be better to tackle the problem on time?
Regards,
Manimalle -
Hello there. Has anyone else seen a PowerMac G4 450 that won't turn off. I shut it down through the OS, but it turns itself back on after a couple seconds. I even held the power button till it turned off, but then it just turns itself back on. The only way to keep it off is to unplug it. I haven't tried anything to fix it yet. I check to make sure it wasn't on some sort of schedule in the OS, but not schedules were set. By the way, its running OS 9.2.2. Any thoughts? Thanks
Hi, T S1 -
The usual culprit for that problem is an attached USB device. Most commonly it is a printer, but can be most anything including hubs and even the USB extension cable (for the keyboard) that came with some G4s, or a partially stuck power button on a keyboard which has one.
Try disconnecting all USB items except the keyboard and mouse (and monitor, if yours has a USB connection). Test - if the problem has disappeared, add your devices back in one or two at a time and test again until you've found which one is doing it.
The problem stems from the item sending (via reflection or generation) a USB signal which the Mac interprets as a boot command. In some cases a self-powered USB hub can be used to filter out the spurious signal. -
Three week old iPad won't turn off. Has words on the screen that say:
iCloud Backup
This iPad hasn't been backed up in 3 weeks.
Backups happend when this iPad is plugged in,
locked, and connected to Wi-Fi.
OK
When I click on the OK button nothing happens. I have tried to turn the iPad off and restart but I can't even do that. What is happening with the iPad?
Thanks
MaryFantastic, thanks so much.
This also helped my problem.
You're a gem!
Have a great one
Jess -
I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs. -
My Ipad2 won't turn off. I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work. I can't get onto the internet via wi-fi either (don't have a 3G card fitted). All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?
Look at last link.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Help me! I have a new iPad mini that won't turn on. It was working fine this morning then i turn it off and it never turns back on. it doesnt register with iTunes and resetting isnt working either. All I did is download instagram and snapchat and poof doesnt work. I have had these apps before!
Make sure it's plugged into the charger.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I am not able to turn off voice over. I have tried to do settings -> General -> Accessibility -> VoiceOver and then triple clicked it but the VoiceOver won't turn off. What can I do? I have even tried to reset the machine keeping the data, no use.
A few people have reported problems with the hand gestures since IOS 8. It's not normal, I have don't have the problem on my iPad 4. I doubt it's a major problem but if it happens regularly I'd have it checked out by the Genius bar at the Apple Store.
-
As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.
stevejobsfan0123 wrote:
The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
I found that out 2 years ago, it's just that I thought Apple might have changed that. -
K7N2 Delta ILSR won't turn off, just restarts
K7N2 Delta ILSR won't turn off, just restarts. Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.
PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
Now what?
R. -
HP 2210xi all in one printer won't turn off so I can try resetting it.
I have a error message: Remove and check cartridge. I have removed both cartridges, cleaned them and cleaned the points on the printer. I tried to turn the printer off so I can unplug the power cord and see if resetting will help. Pressing the on/off switch does not turn the printer off. I have not tried downloading firmware updates (something I've never done) and will try that if anyone thinks it will help. I've read that my next step would be to buy new cartridges, but since the printer won't turn off I'm concerned that I'll be stuck with $50 worth of ink and still need a new printer. Any help will be appreciated!!
Hi @3Friends ,
Welcome to the HP forums.
I understand you are having a problem with the scan to email feature on your Photosmart 7520.
I would like to help you.
Try setting a manual DNS.
Here is a link, to a post by happytohelp01, that has some nice screen shots and the steps.
It is for a 7510, but the steps will be the same.
Efax 7510 still won't work after turning off/on ePrint several times
If that does not get the scan to email working, you may have to remove, then enable the web services.
This will be kind of like an uninstall/reinstall, for the scan to email and ePrint features.
If you have a custom ePrint address, it will be lost.
Not lost for six months, or a year, but forever.
Just touch the ePrint icon on the printer
Go into the settings sub menu, then scroll down and chose remove web services.
It will bring you back to the main screen, just touch the ePrint icon again, and enable the feature.
After that go to scan to email and set it up again.
Please let me know if I can be of further assistance.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
Payment terms for advance payment scenario
Dear All payment terms have to create like we have to pay as 50% advance against order & balance 50% against on proforma invoice. Can any one tell me is it possible to define payment terms like this or only option is downpayment configuration. Thanks
-
Installed iTunes on Windows 7 64-bit - converted ALL programs to iTunes
Help. Installed iTunes on Dell Studio XPS running Windows 7, 64-bit. Prior to install, all programs showed their appropriate thumbnail and when you clicked on the program it opened said program. After installing iTunes, all programs (and thumbnails)
-
I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?
-
Problem in JNDI Lookup of Deployable Proxy from the logon par file
Hi, I have customized the Logon par file and have a functionality to call a webservice when the Password Reset happens. <b>from the ResetPassword.jsp , SAPMLogonLogic.java is getting called ,and there is a method called performResetPassword().</b> I
-
I want to know if I can assign no ringtone for private numbers?
I don't want the iPhone ring when a blocked or private number calls me. Any idea.