Clicking the Stamp tool doesn't select the most recently used stamp - Acrobat X

My issue is pretty much what the title says. Clicking the Stamp tool doesn't select the most recently used stamp. According to the Help screens and training videos, it should. I've checked Edit > Prefernces and could not find a setting that adjusted this behavior of the Stamp tool. Does anyone know what can be done to fix this? BTW - It's not just my installation of Acrobat X. Other users at my firm are having the same issue. The OS is Windows 7. Users have administrator rights. Thanks in advance.

Hello Abhilasha,
So, what your saying is that this function, the ability to select the most recently used stamp by clicking the stamp tool, has been removed, in spite of the fact that Acrobat's Help pages says it can be done (Using Acrobat X Standard > Collaboration > Commenting > Apply a Stamp > Step 1 > Second bullet). I wish they would put it back. It was quite handy.
Perhaps I should adjust my request. Do you (or anyone else) know of a way to use the same stamp several times in a row without having to choose the stamp from the stamps list? For example, if you needed to put a check-mark stamp in several places in a document, it would be a pain to have to go back to the list each time. Is there perhaps an undocumented feature (maybe holding down a particular key while using the stamp) that would allow for multiple stamping?
Thank you,
Phillip

Similar Messages

  • Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Cs6: Masking mode doesn't function - can paint the selection correctly - but then clicking the masking tool icon - nor selection ist made. Can I repair that?

    Can I repair that?
    Repair what? Your description seems a bit unclear, maybe posting a few screenshots can help clarify the issue.
    Are you talking about Quick Mask Mode?

  • I am using the pattern stamp tool. when i select my pattern it adds a hatching to teh source pattern and copies that hatching to the destination image

    I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image

    Please post screenshots to illustrate what you are talking about.

  • When I open safari I get a popup that says " this version of Safari doesn't support the community tool bar". Cure the ignorace someone - whats a community tool bar - apparently I have one but don't know what I'm looking at. -

    when I open safari I get a popup that says " this version of Safari doesn't support the community tool bar". Cure the ignorace someone - what's a community tool bar - apparently I have one but don't know what I'm looking at. -

    You installed the Conduit spyware. To remove it, triple-click the following line of text to select it:
    ~/Library/Application Support/Conduit
    Copy (command-C) the text to the Clipboard. Then select
    Go ▹ Go to Folder
    from the Finder menu bar and paste (command-V) into the box that opens. A Finder window may open with a folder named "Conduit" selected. If so, delete the selected folder.
    Select Go to Folder again and enter:
    /Library
    From the folder that opens, delete the following items, if they exist. You may be prompted for your login password.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the folder. Now select Go to Folder one more time and enter:
    /Applications/Toolbars
    Delete that item. Close the Finder windows you opened. Log out and log back in.

  • I want to get rid of the Bing screen but there is no "menu at the top of the Firefox window" for me to "select Tools and then select the Add-ons menu item. "

    I suddenly have a "Bing" screen when I sign onto Firefox---and I want to get rid of it. The support section of Firefox says
    1. "From the menu at the top of the Firefox window, seledt Tools and then select the Add-ons menu item."---but I see no "menu item" nor Tools, much less Add-ons.
    2. "In the Add-ons window, click on the Extensions panel."---but how do I find the Add-ons window?
    3. Find the Bing Bar and Search Helper Extension in the list and click Disable for each of them."---but what and where exactly is that?
    At the top of the screen is only a Yahoo icon on the left and to the right of it a search box, "Web Search,", "My Apps," Yellow Pages," "Weather," "Updates," and "Skype." to the right of those there is a green cross saying "Add more apps. to your toolbar" and to the right of that a sort of gear shift looking icon saying "toobar settings."
    So, in short, how do I get rid of the Bing screen and how do I access those Tools?
    Thanks.

    To get rid of Bing Search Window..............
    Click on View tab / Tools and un-check 'Search' (alias for 'Bing')

  • Double clicking on a file launches the app but doesn't open the file anymore. Why?

    Double clicking on a file launches the app but doesn't open the file anymore. Why?

    I would post in the Illustrator forum here http://forums.adobe.com/community/illustrator or the Dreamweaver forum here http://forums.adobe.com/community/dreamweaver. One of these product forums will be able to help.

  • Firefox launches and re-loads my tabs, but clicking on the tray icon doesn't display the window

    I can see that Firefox is loaded and running (running Windows 7) - I can hear notices of emails arriving and see the miniature version of the active tab when my mouse hovers over the icon in the tray - but when I click on it it doesn't expand the window so that I can view it. I have tried closing and re-opening as well as restarting my computer. I'm hoping for a solution that preserves the open tabs I currently have. Thanks in advance for any and all help!

    * Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
    * Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).
    If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Just upped to ML and the Contact panel doesn't enable the selection buttons

    Just upped to ML and the Contact panel doesn't enable the selection buttons.
    To get my address selection to the e-mail it must be dragged and dropped.

    Thanks sberman for reply,
    No he hasn't. I've tested this with other contacs. If someone is already in my facebook cantacts and I receieve an email from him, but he hasn't included that email address in his facebook account, if I add this new email to his contact card, his picture frame will not appear in mail app. I can see his both facebook and other email address in the contact card.

  • Clone tool has stopped working properly, the sample area doesn't follow the target area?

    Clone tool has stopped working properly, the sample area doesn't follow the target area?

    I understand. I was very unhappy with Adobe when my PSE 11 stoped working properly. I had it for only about 6-7months before I updated my software on my imac and it all went downhill.... Then to add to that my Adobe account was hacked. Adobe never informed me of this situation. I heard through a friend that I should check to see if I was one of the very many who's online accounts were tampered with. I had to reset every single password and username for nearly 30 online accounts to avoid any further tampering with the hackers. And all Adobe suggested was for me to pay for an upgrade to PSE 12 which I did but wasnt very impressed to say the least ( i was on an online chat with them for over 2hours trying to get my PSE 11 issues solved to no avail). Then this sluggish performance starts happening again using the new version PSE 12?. I'm going to stay clear of adobe if I have the option to purchase similiar software from another supplier. I would and will encourage anyone else who has problems with there software to do the same. Older versions should work perfectly fine for ages. I wonder If Adobe is trying to get us all to pay for the monthly subscription option(s) to avoid having issues with older versions of their software. As the subscription option keeps you ontop of all the latest versions... I wouldn't put it past them.
    All the best returned,
    Ray

  • (PSE 11)After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  Please help.

    After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  I am using Adobe Photoshop Elements 11.   Please help.

    Please see:
    http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • Frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through m

    I guess I was not clear.....my fault....let me re-phrase:  frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx  

    You need an app that allows group messaging. Enter group messenger in the search bar in the app store.

  • I have a new ipod nano to replace a previous one. I can't copy over my old playlists on to the new ipod. have tried selecting the playlists I want to sync but when I click sync , nothing happens

    I have a new ipod nano to replace a previous one. I can't copy over my old playlists on to the new ipod. have tried selecting the playlists I want to sync but when I click sync , nothing happens

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • The DB tools doesn't work with Microsoft SQL

    I am tring to write series of waveforms to a database. The DB tools doesn't work with Microsoft SQL, but when i replace the SQL with Access, it works fine. I have to use SQL in the application.
    Any advice pls?
    longing for your reply.
    Attachments:
    test.vi ‏47 KB

    Right off hand I would say the problem is that you are connecting through ODBC. Try the native SQL Server driver, your connect string should define the provider as "SQLOLEDB.1".
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl   T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

    Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
    Thanks
    Derek

    Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
    If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

  • CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

    CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

    At one time tool  recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
    I use and record actions all the time and was looking forward to tool recording when Adobe announced it.  However I found what they delivered was  of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
    The amount of data that gets reordered seems also vary between machines.  I found that Action recorded on fast machine are not usable on slow machine.  Fast machine recorder too much data.
    Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
    You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

Maybe you are looking for