Clicks and Popps in FCE

Hello,
I just started with FCE 3.5. My first project is a iMovie project I started in iMovie and now imported into FCE.
Here is my problem. After adding clips from the browser to the timeline and rendering it the audio makes clicks and pops (I don't now how to explain it best). I don't have the problem with the same clips in iMovie.
Any advice?
Thanks and regards
Andy
iMac G5 20" iSight 2.1GHz 1.5 gig RAM   Mac OS X (10.4.5)  
iMac G5 20" iSight 2.1GHz 1.5 gig RAM   Mac OS X (10.4.5)  
iMac G5 20" iSight 2.1GHz 1.5 gig RAM   Mac OS X (10.4.6)  

Hi,
I have no mp3 in the project. The files with the problems are the movie clips. And you are right. iMovie is just great. I get the feeling much better then FCE. Its much more difficult to only achieve the same results then in iMovie. If I just look at the great themes I have in iMovie. I have only switched to FCE because my project last around 90 minutes and iMovie wasn't able to handle it (not this project - the one before) FCE very poorly imports iMovie projects. It doesn't import any transitions and "forgets" half of the timeline.
Thanks for your feedback
Andy

Similar Messages

  • Interesting finds on Audigy 2 Clicking and popp

    Hi, I thought my card was bad but I see I'm not the only one. I was playing FEAR and noticed the clicking and popping sound. So I saved at the exact point where it was and decided to investigate why. I tried every driver release Creative had for the card. No luck. No IRQ sharing, disabled firewire, cleaned registry, relocated to 3 different PCi slots. Still clicking and popping. Turned off Cool and Quiet and still clicks. So changed the latency settings and still clicks. All that was left to do was mess around with game settings. Sound settings did nothing, EAX nothing, changing hardware excelleration did nothing, and then I finally stopped it. I turned AA off. I had it at 4x, clicked really bad. Put it at 2x and clicking downgraded. Put it at 0 and clicking was gone. Now remember I saved it at a spot that clicked everytime I reloaded the save so this was an experiment with every setting and change I could do to find out what it was. With AA enabled,if I turned the slightest to the left and right, it would click. If I stopped just right it would do a clicking loop. Click, click, click, and wouldn't stop. Just the slightest turn and it would stop. So it has to do with either a driver conflict or conflicts with certain cards. I had it to in HL2. The question is why would aa effect the sound output of the card? Another person here found out the same thing I did but his was in HL2. Turned the settings to what the game wanted and the clicking went away. So now we have to figure out why and some of us will have the problem solved. I know not everyone will be fixed but alot of us will. Here are my system specs:
    AMD 64 3700+ Clawhammer latest driver and C&Q enabled
    ASUS K8V Deluxe latest bios
    gig Corsair XMSPLT at 2-2-2-5-t
    Sapphire X800XT at stock using Cat 5.
    Audigy 2 retail using betas
    PC Power and Cooling Turbo Cool 50 SLI
    latest Via driversMessage Edited by radeon666 on -23-2005 07:55 AMMessage Edited by radeon666 on -23-2005 07:57 AM

    well, i installed this in a completely different device with minimal hardware and the same problem occurs. seems like the card could have been built with some better shielding. anyways, you would think that if you spend $200 on a piece of hardware, you wouldn't have to spend 0 hours trying to get it to work properly.

  • I know I've heard that iPads/iPhones can't get viruses but is it possible that they can? While using my iPad, it keeps going in and out of apps. On Facebook, status and profiles keep getting clicked and it keeps zooming in and out. Can anyone help

    I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • When I click on links in websites the links don't work unless I right click and choose open website in another tab/window. This is even a problem on the Firefox page.

    When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It doesn't happen 100% of the time but happens especially if there is a button or picture that must be clicked. Simple text links seem to work more often then button or picture links. One example provided below. When you click on the "launch Jumpstart" button it will not open unless you right click & open new. This also happens from my Yahoo! Email account, on Facebook, Cructhfield.com and other websites with "button" related links.

    I have the same problem but it appears that an add-on I'm using is causing the problem. Try opening Firefox in safe mode (which disables add-ons) Then try it. If that solves the problem, you need to disable all your add ons and enable them one by one to figure out which one(s) is causing the problem.
    [http://www.chowins.com David Chowins]

  • I can't open links in firefox. I must drag them to the tool bar or right click and open in a new page

    I am running Vista and installed a new version of firefox yesterday plus I messed around with trying to block some obnoxious advertising pop up windows. Now I can't open links and must drag them to the browser bar or right click and "open in a new window". How do I fix this? I tried to restart Firefox but it didn't help. thanks!

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to open a new window and see if that window works.
    You can check for problems with the localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • After I rt click and hit "save image/page as" the dialog box doesn't open.

    When I try to copy an image or a web page I get no dialog box that opens after I right click and select "save image/page as". The option to send link works.

    Sorry, here the information that is required:
    Version 11.0.4.2 - CS6
    Installed recent updates: Yes
    OS: Windows 7 Pro (Service pack 1) 64 bit
    Model: HP Z420 Workstation
    Processor: Intel Xeon CPU E5-1620 @3.60Ghz
    Ram: 8Gb
    Has it worked before: yes. It started after I opened a project (trough "open project") because double clicking on this project gives the follwoing error: "The directory name is invalid". Via "Open project" I could open it.
    Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
    Quicktime 7 pro installed
    Do you have any third-party effects or codecs installed? Yes, Optical Flares & Trapcode. But is unrelated since it isn't a specific project.
    Are you using Render Multiple Frames Simultaneously multiprocessing? Yes
    Are you using the ray-traced 3D renderer? No
    Thanks for the help. If you need any other info, let me know

  • Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

    Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • The curser includes a text box from a previous image or link when the curser is positioned on the side of the page. i click and it goes away but only to return again on the next launched page. how do i get rid of this?

    the cursor includes a text box from a previous image or link when the cursor is positioned on the side of the page. it will mainly happen when i hit "back" from the page i was on. i click and it goes away but only to return again on the next launched page. i also keep several tabs open and it will carry over to any one of them i go to. how do i get rid of this?
    == This happened ==
    Every time Firefox opened
    == when i upgraded to most recent version 3.6.8

    A number of extensions can cause that problem, you'll need to do a little troubleshooting to find out which extension is causing that to happen for you.
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • I cannot open my Safari. I double click and still loading forever an ever. I cannot get to any preferences at the configurations bar. Any help please?What should a i do to fixe that?

    I cannot open my Safari. I double click and still loading forever an ever. I cannot get to any preferences at the configurations bar. Any help please?What should a i do to fixe that?

    I saw on another post you have asked about this dates LINC DAVIS:
    Date/Time:       2014-07-01 19:03:59 -0300
    OS Version:      10.7.5 (Build 11G63)
    Architecture:    x86_64
    Report Version:  9
    Command:         Safari
    Path:            /Applications/Safari.app/Contents/MacOS/Safari
    Version:         6.1.5 (7537.77.4)
    Build Version:   1
    Project Name:    WebBrowser
    Source Version:  7537077004000000
    Parent:          launchd [203]
    PID:             624
    Event:           hang
    Duration:        1.46s
    Steps:           15 (100ms sampling interval)
    Pageins:         7
    Pageouts:        0
    Process:         Safari [624]
    Path:            /Applications/Safari.app/Contents/MacOS/Safari
    Architecture:    x86_64
    UID:             501
      Thread 0x1597a      DispatchQueue 1
      User stack:
        15 ??? (in Safari) [0x10557ff2c]
          15 SafariMain + 266 (in Safari) [0x10577947c]
            15 NSApplicationMain + 867 (in AppKit) [0x7fff8b559eac]
              15 -[NSApplication run] + 470 (in AppKit) [0x7fff8b2dd9b9]
                15 -[BrowserApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 161 (in Safari) [0x1055e44d5]
                  15 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff8b2e107d]
                    15 _DPSNextEvent + 1247 (in AppKit) [0x7fff8b2e19c5]
                      15 AEProcessAppleEvent + 102 (in HIToolbox) [0x7fff82c85b69]
                        15 aeProcessAppleEvent + 250 (in AE) [0x7fff832b89f7]
                          15 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 38 (in AE) [0x7fff832b8b03]
                            15 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 200 (in AE) [0x7fff832b8c25]
                              15 _NSAppleEventManagerGenericHandler + 105 (in Foundation) [0x7fff896ed5dc]
                                15 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 283 (in Foundation) [0x7fff896ed74e]
                                  15 __-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_1 + 101 (in Foundation) [0x7fff896ee7c7]
                                    15 -[NSObject performSelector:withObject:withObject:] + 65 (in CoreFoundation) [0x7fff81947541]
                                      15 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 330 (in AppKit) [0x7fff8b2e45b9]
                                        15 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 227 (in AppKit) [0x7fff8b2e4849]
                                          15 -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:registeringAsReady:completion Handler:] + 193 (in AppKit) [0x7fff8b2e49f9]
                                            15 _NSPersistentUIFinishAcquiringTalagentWindows + 93 (in AppKit) [0x7fff8b3108cb]
                                              15 copyTalagentWindowsAcquisitionBlock + 79 (in AppKit) [0x7fff8b310947]
                                                15 +[NSBundle mainBundle] + 55 (in Foundation) [0x7fff896e1bb9]
                                                  15 -[NSRecursiveLock lock] + 25 (in Foundation) [0x7fff896badf9]
                                                    15 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff87733bf2]
      Kernel stack:
        15 psynch_mtxcontinue + 0 (in mach_kernel) [0xffffff800059eb20]
      Thread 0x1599d      DispatchQueue 2
      User stack:
        15 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8ae7e316]
          15 kevent + 10 (in libsystem_kernel.dylib) [0x7fff877347e6]
      Kernel stack:
        15 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
      Thread 0x159a4   
      User stack:
        15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
          15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
            15 _ZN3WTFL19wtfThreadEntryPointEPv + 15 (in JavaScriptCore) [0x105e2da3f]
              15 WebCore::IconDatabase::iconDatabaseSyncThread() + 303 (in WebCore) [0x106958faf]
                15 WebCore::IconDatabase::syncThreadMainLoop() + 491 (in WebCore) [0x10695c39b]
                  15 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff87733bca]
      Kernel stack:
        15 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
      Thread 0x159a9   
      User stack:
        15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
          15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
            15 thread_fun + 24 (in QuartzCore) [0x7fff81e65d35]
              15 CA::Render::Server::server_thread(void*) + 184 (in QuartzCore) [0x7fff81e65df5]
                15 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8773267a]
      Kernel stack:
        15 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
      Thread 0x159b2   
      User stack:
        15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
          15 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8d3eb8bf]
            15 __NSThread__main__ + 1575 (in Foundation) [0x7fff8970f6a2]
              15 -[NSThread main] + 68 (in Foundation) [0x7fff8970f72a]
                15 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335 (in Foundation) [0x7fff8971afd7]
                  15 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff818e9486]
                    15 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff818e9c74]
                      15 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff818e150c]
                        15 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8773267a]
      Kernel stack:
        15 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
      Thread 0x159b7   
      User stack:
        15 thread_start + 13 (in libsystem_c.dylib) [0x7fff8d3eeb75]
          15 ??? (in Safari) [0xdeadbeef]
            15 dlopen + 540 (in dyld) [0x7fff65188657]
              15 dyld::runInitializers(ImageLoader*) + 97 (in dyld) [0x7fff651821b9]
                15 ImageLoader::runInitializers(ImageLoader::LinkContext const&, ImageLoader::InitializerTimingList&) + 59 (in dyld) [0x7fff6518d0b7]
                  15 ImageLoader::recursiveInitialization(ImageLoader::LinkContext const&, unsigned int, ImageLoader::InitializerTimingList&) + 237 (in dyld) [0x7fff6518c2cd]
                    15 _ZN4dyldL12notifySingleE17dyld_image_statesPK11ImageLoader + 226 (in dyld) [0x7fff65180973]
                      15 load_images + 233 (in libobjc.A.dylib) [0x7fff8897636b]
                        15 call_load_methods + 161 (in libobjc.A.dylib) [0x7fff889766ca]
                          15 +[VSearchLib load] + 92 (in libVSearchLoader.dylib) [0x109b72bf4]
                            15 -[NSBundle principalClass] + 41 (in Foundation) [0x7fff8970ed84]
                              15 -[NSBundle load] + 18 (in Foundation) [0x7fff897173f8]
                                15 objc_msgSend_vtable3 + 24 (in libobjc.A.dylib) [0x7fff889780d8]
      Kernel stack:
        15 hndl_alltraps + 225 (in mach_kernel) [0xffffff80002da481]
          15 user_trap + 711 (in mach_kernel) [0xffffff80002c4017]
            15 exception_triage + 149 (in mach_kernel) [0xffffff8000220e15]
              15 exception_deliver + 766 (in mach_kernel) [0xffffff8000220c1e]
                15 exception_raise_state_identity + 325 (in mach_kernel) [0xffffff8000249c75]
                  15 mach_msg_rpc_from_kernel_body + 277 (in mach_kernel) [0xffffff80002239d5]
                    15 ipc_mqueue_receive + 70 (in mach_kernel) [0xffffff8000215886]
                      15 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f42b]
                        15 thread_continue + 1661 (in mach_kernel) [0xffffff800022f1ad]
                          15 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c2939]
      Binary Images:
             0x10557f000 -        0x10557ffff  com.apple.Safari 6.1.5 (7537.77.4) <1144E535-39EB-3DD2-8326-F931E2CEDFC5> /Applications/Safari.app/Contents/MacOS/Safari
             0x105589000 -        0x105ac2fff  com.apple.Safari.framework 7537 (7537.77.4) <079F7B57-311E-3A81-B3ED-B7AC3F78E262> /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
             0x105e24000 -        0x1061cbff7  com.apple.JavaScriptCore 7537 (7537.77.1) <C0C6D15C-8C26-3FD8-BE2E-7A1C20B46359> /System/Library/StagedFrameworks/Safari/JavaScriptCore.framework/JavaScriptCore
             0x106953000 -        0x107a00ff7  com.apple.WebCore 7537 (7537.77.4) <E0176EFF-835E-3B32-909D-E3A426947476> /System/Library/StagedFrameworks/Safari/WebCore.framework/WebCore
             0x109b72000 -        0x109b73fff  libVSearchLoader.dylib ??? (???) <2DF78468-AB4B-363E-A838-D4CE14679E8B> /System/Library/Frameworks/VSearch.framework/Versions/A/Libraries/libVSearchLoa der.dylib
          0x7fff6517f000 -     0x7fff651b3baf  dyld ??? (???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
          0x7fff818b1000 -     0x7fff81a85ff7  com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff81e63000 -     0x7fff82003ff7  com.apple.QuartzCore 1.7 (270.5) <19E5E0AB-DAA9-3F97-988C-D9A46AFB9C04> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
          0x7fff82c75000 -     0x7fff82fa1fff  com.apple.HIToolbox 1.9 (???) <CCB32DEA-D0CA-35D1-8019-E599C8007AB6> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
          0x7fff832b5000 -     0x7fff832f4fff  com.apple.AE 527.7 (527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
          0x7fff8771d000 -     0x7fff8773dfff  libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
          0x7fff8896d000 -     0x7fff88a51e5f  libobjc.A.dylib ??? (???) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
          0x7fff896b5000 -     0x7fff899cefff  com.apple.Foundation 6.7.2 (833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
          0x7fff8ae7c000 -     0x7fff8ae8afff  libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
          0x7fff8b2d9000 -     0x7fff8bedffff  com.apple.AppKit 6.7.5 (1138.51) <44417D02-6123-3FC3-A119-CE51BB4C3006> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
          0x7fff8d39d000 -     0x7fff8d47afef  libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib

  • "I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    Nothing to fix...things have changed...slide the camera icon up now..no more double tap.

  • Double-click and drag don't open image files

    Hi,
    I'm having problems loading images in Preview and Adobe apps (CS1).
    From Finder, I can double click to open an image in Preview but it only opens the first image, and won't load more than one. I've tried changing the preferences to "open groups of images in the same window" or "open all images in one window." Neither solve the problem.
    My adobe apps won't open a file when I double click it from the finder at all. I have to use the "open" command from within the application to open an image file.
    I am a designer and photographer trying to browse groups of images at once and this is driving me crazy! I have tried copying over different preference files from my old computer (a powerbook G4), and I'm wondering if I either failed to copy the right one or copied something that is interfering with the shortcut actions.
    The interesting part is, that the same actions are working fine for other kinds of files -- for example, I can open multiple word documents by double clicking their icons in Finder.
    Any suggestions appreciated. Thank you.
    Amy Hengst

    Hi Amy
    What kind of files are these? If I wanted to open multiple images in Preview (be they BMP, JPEG, PSD, whatever) I would select them and drag onto the Preview icon in the Dock which opens the first image in a single window with the remaining images in a 'thumbnail drawer' to the right (like you get with big PDF documents).
    On the other hand if I double-click, 10 to 1 it would launch Photoshop which I use as an image editor only, not an image manager or viewer. You can of course change the application which any document uses to open it, with the Get Info window. But if you use more than one application (as I do - PS to edit, Preview to just view), then click-and-drag onto the Dock might be your best bet.

  • Double -click and feedback

    Hi all,
    I have been using Captivate since release 1. Often I have a
    user perform a double-mouse click on an item. Without fail, I get
    the incorrect feedback message from the second slide as if I tried
    to click in the wrong spot on the second slide.
    On slide 1, I go to the Options menu for the click box and
    select Double-mouse click and Pause for Success/Failure captions.
    On slide 2, I remove the failure caption otherwise it comes
    up automatically as if I already clicked on the slide when I did
    not. It seems to recognize the second click from slide 1 even
    though slide 1 won't advance unless I do a double-click.
    If anyone has any ideas of how to fix, please let me know,
    Thanks!

    Hi eLearner22
    This is going to sound weird, but the click box that requires
    a double click, have you got it set to start at 0.0 seconds in the
    timeline?? If so, then change it to start at 0.1 or 0.2 seconds.
    This should solve the problem.

  • Double-click and trackpad

    right now, i enable double-click to drag any window in OSX
    so if i double-click on the window title, it should allow me to drag the window, but instead it miminize it, so what is the correct way of double-click and drag?
    btw, is there way i can simulate middle-click using trackpad?

    well
    of course i did check that before making this post
    but i just can't get the dragging to work with double-tap
    plus there is no middle-click simulation
    is there any hack to simulate middle-click on trackpad?

  • Mail "New Message" window retreats to background after drag and drop attachment from Finder to Mail "New Message", click, and Finder window stays in foreground even when not in focus

    Hi, I'm surprised I can't quickly find if anyone else is having this issue. For me it has been going on since Lion on my 13" MacBook Pro 2011 and it's still persisting in Mavericks, and even still now that I've "downgraded" to a 15" MacBook Pro 2010 with Mavericks.  The behavior is odd and difficult to explain concisely. Basically, when I want to add an attachment to Mail, I'll Cmd+Tab over to Finder click and drag and Cmd+Tab back to Mail, and drop the attachment. At first it looks fine, but when I click in the New Message window where I just dropped the attachment, to move the cursor, it retreats to the background and the Mail Main Window comes to the foreground. Then, if I click on that, the Finder window that I just used comes to the foreground. Sometimes if I switched to another app before going to Finder to select the drag and drop, that other app window will appear in the foreground instead. If I click on the other app window that is now in the foreground, then the Finder window that was last used will come to the foreground. The only thing that seems to fix this switch-a-roo effect is Cmd+Tab-ing back and forth a few times, or click on the window "frame" at the top to move the window around.
    The way to prevent this is to have my Mail Message window visible in the foreground side by side with the Finder window when the drag and drop occurs (this is a tedious extra step if mulitple windows are open, or to use the add attachment command in the menu within Mail. But it sure is annoying buggy behavior.
    Thanks
    Daniel

    Yep, I get exactly the same thing when using Thunderbird mail client on my 2011 iMac running Lion. I've been putting up with it for at least a year, maybe longer.
    For me it appeared to start after a Thunderbird update, so I figured that was the cause and couldn't find a solution at the time. However I've now noticed it starting to happen in Apple Motion 4 when dragging files from Finder into a DropZone in my animations. Motion remains the active program but the Finder window sits on top until I Cmd-tab out to a third open program (ie not Finder) and back to Motion again.
    This is the first indicator I've had that it's an OS X issue.
    Be great to find a solution as D&D is by far my preferred way of adding attachments to emails and similar tasks.

  • On OSX 10.5.8 and I can't cut & paste or click and drag, HELP!

    Hi all,
    Please help! I can no longer click and drag icons or cut and paste.  I'm running OSX 10.5.8 on an '07 macbook, and I really do not want to loose everything, is there a solution???  At the same time I have had a little trouble with the net and downloading files.
    Is there a fix??  I'm desparate

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Maybe you are looking for

  • Receiving an event with no To: email address

    I'm trying to access an email that is sent to a blinded mailing list... in particular the email contains an .ics event file. When I click on the hyperlink to open the event in iCal, iCal eventually gives me an error. The error states that since the T

  • PO with account assignment category K and use two cost center

    Dear Experts When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted. Any input on this please.

  • Text in Illustrator CS6 displays the red plus sign but there is no overset text. How can I remove?

    I have some text blocks in Illustrator CS 6 that display the red plus sign that indicates overset text but there is no overset text. It occurs in files that were created with earlier versions of Illustator and now we are reworking them. It can't be d

  • Windows 7 "Save As" hangs in the common dialogue box

    All attempts to Save As hang when the common dialogue box comes up. This hanging occurs with all the Office 2013 programs, custom applications, the lot. It hangs before I get a chance to key in anything. All Windows Updates done, Registry Booster say

  • .swf file

    Hi All, I have uploaded a .swf file as a static file to one of our workspaces. I have added the code in the HTML region as "<a href="#WORKSPACE_IMAGES#new.swf" target="_blank">Viewlet </a>". When I click on the URL, I get a browser window, but the .s