Clicks don't work after few times on same shopping page

When shopping on a page I can only successfully click 2 or 3 times & then I have to refresh before clicks work again! It used to be fine until recently. I did get my screen repaired & wondered if that would affect it. Can anyone pls help?

Yes would have been whole screen as about a quarter of it was shattered when it slipped out of my hands. I didn't get it fixed for a while & didn't have any issues with it broken. But why would it work few times on certain page & then "jam"?

Similar Messages

Mail accounts stop working after few time or sleep

Hi everyone. First at all sorry about my english.
Since few days ago, and probably after run onyx, im experiencing a bug in Mail.
When i start mail, everything its ok. Its works perfect.
But, after maybe 2 hours running (usually i have mail on autostart), i see that all my acounts have the triangle on it.
I click on the triangle and tryed to reconnect all accounts but it does nothing. All of them still not working.
I run the test and all accounts have the red mark of error.
It usually happends when i awake the macbook after sleep.
It has easy solution. Close mail, and open mail again and is ok, everything working normaly, but after some time i have the same problem.
Any suggestions?
Thank you.

If I first delete the accounts, doesn't all the mail I've already got get dumped?
Could I avoid this?
How do I troubleshoot first? It works so well that I've not had to do this.

Sounds, keyboard clicks don't work after iOS 7 update

App, mail sounds, etc., and keyboard clicks inoperable after update

Hello ggmcl,
I would be concerned too if the sounds on my iPhone were not working. I found an article with some steps to take when you are experiencing issues like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

LAN turn off after few time while Satellite L300D-10B is working

The main problem is that when I trying to download something long, after few time (30 min to 1 hour or something near value) the network card is turning off and does not work again when I disable/enable it. It only began work when I reestart my notebook.
+Notebook buyed in january of this year.+
Model is: *Satellite L300D-10B*
I'm trying to reinstall network driver & etc. But this is not helpfull.
i think this si about wake on or sleep settings of network card, but I'm turned sleep and @auto turn off@ to off.
Help to repair this problem.
Best Regards!

You should try to update the BIOS so check the Toshiba website for an update:
http://eu.computers.toshiba-europe.com
Make also sure that you have all updates and Service Packs for Windows installed.
Visit the Windows Update website.
Maybe the problem is also caused of the firewall or security suite. Update it or change the software.

Sound not working after some time

I am using pavilion g6 laptop. Nowadays my laptop sound stops working after some time of use. I checked the drivers but everything seems to be ok. Please help what to do??

Hi sushovanee,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you have a G6 notebook and after a period of time you lose the sound.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with this difficulty.
Has there been any recent changes to your system?
To assist you I will need some more information.
What exact model of G6 do you have?
How Do I Find My Model Number or Product Number
What Operating system are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Macbook pro 13inch,mid2010 qwertyu keys don't work after upgrade os x Yosemite

macbook pro 13inch,mid2010 qwertyu keys don't work after I upgrade os x 10.10 Yosemite. but it works on keyboard viewer. I'm not sure if it's hardware or software problem, how can I fix it?

Hello there, kipolo.
Great job using the Keyboard viewer to troubleshoot your issue so far. The following Knowledge Base article provides a great checklists of steps to pinpoint the issue a bit further:
One or more keys on the keyboard do not respond - Apple Support
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Since the iOS7 upgrade my iMessages don't work all the time.

Since the iOS7 upgrade my iMessages don't work all the time. The will work for for a few days, but then all of a sudden they stop working. They are still activated in settings, but not sending. If I turn on and off my phone they work again for a while and then stop again. I'm not sure if turning off and on my phone again is re-activating the iMessages which is why they start to work again for a while. But it's a pain having to turn off and on my phone each time, and when sending an iMessage not knowing whether it's going to send this time or not is a bigger pain. Also everytime I turn off and on my phone (which i think is re-activating the iMessages) a text is sent to the following UK number: +447786205094 - so it's costing me each time!
Is there a fix for this?

Turning off and back on or hard reset seems to work for a day or two. After resetting I am occasionally losing messages that were there before reset. In addition, I have had 3 messages that I received a notification for when they came in but go into messages and not there. Message incon still shows 3 unread messages but when I open messages I have no unread messages??? Power on-off or hard reset does not seem to fix this. At least a reset gets imessages working again. Hope fix is out soon. This is a PIA.

Mouse clicks don't work

I have set up a menu with auto action buttons and for some reason mouse clicks don't work. I can click multiple times on a button without anything happening. However, navigating with arrows on the keyboard works fine.
Is there anyway I can enable my mouse to work.

Hi,
Are you testing your DVD in DVDSP simulator? If som try building the disc in your hard drive and test runing the VIDEO_TS folder with DVD player to check if the issue is there too.

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Hello, I was trying to purchase an item in a game call 帝王三国! but it does worked first few times, but it isnt working anymore ! It tells me to contact apple store to purchase the item.

Click here and request assistance.
(91679)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IPhone 3GS apps don't work after 4.3 upgrade

Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Webmail in Safari don't work after updating to iOS6.

Webmail in Safari don't work after updating to iOS6. Logging on to office webmail account are redirected. Webmail works with Google Chrome, but it doesn't sove the issue with Safari. Any suggestions on how to configure Safari?

Try this
I was having this problem, seem to happen when waking computer, once finally connected network works great.
You need to edit your network preferences to order the network selection list. Goto this support page Using network locations (Mac OS X v10.6 and later) and edit your selection list.
I also created a "HOME" location and deleted all networks except wifi. Put MB to sleep woke and safari worked great. Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down. Don't forget to click Apply. Have fun

Mission control gestures fail/don't work after sleep

Newbie to a 15" Macbook Pro, Lion, with the most recent updates.
I've noticed what I imagine is an operating system error twice now, where after waking the computer from sleep, my Mission Control gestures (I've got 4 finger swiping between desktops, 4 finger up/down for expose or mission control) and the Launchpad/Desktop thumb and 3 finger gestures all simply don't work. All of the same preferences are chosen in System Preferences, but those gestures simply don't work. The trackpad otherwise seems to work with scrolling, 3-finger dragging, tap to click, etc.
The only way I've been able to get the gestures to return is by restarting the computer.
Any ideas on what is going wrong? Is there a command line or other process that would allow me to restart the gestures service without having to completely restart --- that isn't ideal (the ideal is that this wouldn't happen), but a workaround solution is better than nothing?
Thanks

It appears after repairing my permissions with Disk Utlity has fixed this. Open up Disk Utlity (Found under "/Applications/Utilities/Disk Utility.app" - But typing "Disk Utility" in Spot Light should open it).
Select your disk (in my case, Macintosh HD) and click on the button that says "Repair Disk Permissions".
Don't even need to restart!

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Clicks don't work after few times on same shopping page

Similar Messages

Maybe you are looking for