CLID not shown on FXS port

I am using Call-manager 6.0.1b, a MGCP controlled Gateway.On the Gateway i have installed a NM-HD-2V with a Vic2-2FXS module. On this module i connect 2 analog phone with capability to display the Caller-ID. When i call the analog port from a ip phone or from the other analog phone the Dn is not shown. When i connect the phone directly to the PSTN and dial this nr via my cell phone the nr is shown so i expect that the nr format received is not correct. How can this performed that the correct format is shown to the FXS port connected phone ?

Hi,
Yes - you are correct. Looked at this one too quickly.
You will want to make sure the CPTONE defined on the port is for the country the phone is manufactured for, and that the voice-pport has the 'caller-id enable' command.
If those are both correct, and I'm guessing that they are since some caller-id works, then you need to inspect the gateways that take the calls to begin with.
Do you have caller-id trouble for internal calls also?
How do these calls come into your network?
hth,
nick

Similar Messages

  • CLID presentation fails on FXS port

    i have a mgcp gateway with a nm-hd-2v , and the modules vic2-2fxo ,vic2-2fxs
    The CLID of the external call is presented normally on my fxo port and displayed on the IP (soft-)phones.
    I dont see the nr getting presented on the FXS port when i debug.
    Called number and calling nr remains empty.
    I see a calling nr when i do a csim start <exention>
    caller-id enable is configured on the fxs port configuration at the gateway.
    tried several type of caller-id alerting methodes without success.
    When connecting the same phone on the pstn, i get the clid normally so it is something in the configuration
    regards

    Hi,
    Yes - you are correct. Looked at this one too quickly.
    You will want to make sure the CPTONE defined on the port is for the country the phone is manufactured for, and that the voice-pport has the 'caller-id enable' command.
    If those are both correct, and I'm guessing that they are since some caller-id works, then you need to inspect the gateways that take the calls to begin with.
    Do you have caller-id trouble for internal calls also?
    How do these calls come into your network?
    hth,
    nick

  • Transmission Volume on a FXS Port

    G'Day,
    We have a fax machine connected to an FXS port in a 2851 (CME 4.1). Running tests on the machine reveal that the transmission volume is set too high, causing distortion on faxes and an inability to fax to some destinations.
    Is there a way to turn the transmission volume down at the port-level? Apparently it cannot be done on the fax machine (? this sounds odd to me...but the technician for the machine is adament)
    Thanks,
    -marti-

    This depends if the faxing is being done via fax relay or fax passthrough.
    If fax relay is being used, the fax traffic originates from the egress voice port connected to the PSTN, not from the FXS port that has the fax machine on it. The output level of the fax relay codec is fixed - at this stage it is not possible to alter the level of the outgoing audio on the 2800/3800 ISR's.
    If you use fax passthrough, the audio is transmitted via a G711 codec. You can use the voice port 'input-gain' or 'output-attenuation' command to boost or reduce the levels in different directions.
    If the level FROM the CME system towards the PSTN is too high (for example 3dB), you would use the command 'input-gain -3' on the FXS port to reduce the inwards audio level by 3dB, so the level SENT to the PSTN is correspondingly reduced by 3dB.
    Most fax machines can set the outgoing audio levels - they may have a special config menu that is not normally directly accessible by users.

  • COM port are not shown in my applicatio​n

    Hello,
    there is a reason why com ports are not shown on a Xp Embedded Touch Panel? 
    I have to communicate through a serial port in my application but com ports are not shown in Visa Resource Name control ...
    I have included all VISA related things in additional installer ...
    Solved!
    Go to Solution.

    Ok, i checked functionality of COM ports with a non-National Instruments programs and all it's working. Only Labview apps cannot see them.
    On another PC where the Labview app works if i look at installed Programs in NATIONAL INSTRUMENTS section i can see:
    NI VISA RUN TIME 5.1.0
    NI VISA 4.5 for Labview on Windows Mobile/CE
    On the machine where there the problem under National Instruments SW i can see only:
    NI system components
    but i've added in additional installer section of the app installer all VISA related stuff...

  • UC520 FXS ports will not dial out

    Not sure what is happening on this one.  UC520 latest sw pack has decided that the onboard FXS ports will no longer dial out.  Dialing inturnal extensions is fine both ways.  DID's incoming to those FXS ports also work.  Dialing access code 9 for the PRI simply no go.  I have rebooted the UC520 I have even changed the FXS seetings from Fax to Common area and back again seeing if that would clear up any bugs in the config, but still no luck.
    So simply put FXS ports on UC520 will no longer allow outbound calls.
    Thoughts!

    Hi Cathal,
    Please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you with this issue.
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    Best regards,
    Wendy Yang

  • IPod not shown in ITunes, PC, or Explorer

    My daughter has a first generation Ipod Nano. It's always worked fine, at least up until she installed Itunes 7. Now, nothing seems to work. The Ipod is not shown in ITunes, on our computer, in device manager, in Windows explorer, etc. We have tried the 5 Rs numerous times, used different USB ports, bought a new USB cable, etc. Also, when the Ipod is plugged into the PC, the entire PC freexes.
    We're desperate--the Ipod is still fine when not connected. We can't restore the Ipod since ITunes doesn't recognize it.
    Can anyone tell us something new to try? If we removed ITunes 7.0 and re-installed the previous updater, would she lose her music?
    This is driving me nuts! lol

    Try setting the nano into disk mode. I'm not sure of the button sequence for the nano, but for my iPod 3G you hold down the menu button and the play pause button until the apple logo appears. Then you hold the forward and back buttons until it gives you a check mark and says disk mode on top.
    For the nano I believe it's menu and center select button to restart and then forward and back.
    This should at least allow your computer to recognize the device so you can change the drive letter.
    CK

  • Cisco 2432-24FXS Calls won't ring FXS ports when placed in Huntgroup

    Hi,
    I am having an issue getting calls to ring through on the FXS ports when using the "trunkgroup" command under the POTS dial-peers. Calls will ring through fine if I use the "port" command under the pots dial-peer. What I am trying to accomplish is getting a single number to hunt through 13 FXS ports in a round-robin fashion. With the below setup I am getting a SIP 404 not found message in the SIP debug info. I am not sure if I am missing something here or what the deal is. If the below information is not enough I would be happy to provide additional info. Any idea's why this configuration doesn't seam to work?
    trunk group HuntGroup1
    hunt-scheme round-robin both up
    dial-peer voice 1 voip
    translation-profile outgoing 7to11
    destination-pattern .T
    progress_ind setup enable 3
    no modem passthrough
    voice-class codec 1
    session protocol sipv2
    session target dns:XXXXXXXX
    dtmf-relay rtp-nte
    fax rate 14400
    fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 300 pots
    trunkgroup HuntGroup1
    description TEST NUMBER
    destination-pattern XXXXXXXXXX
    voice-port 2/0
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 1
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/1
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 2
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/2
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 3
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/3
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 4
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/4
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 5
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/5
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 6
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/6
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 7
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/7
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 8
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/8
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 9
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/9
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 10
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/10
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 11
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/11
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 12
    station-id number XXXXXXXXXX
    caller-id enable
    voice-port 2/12
    trunk-group HuntGroup1
    timeouts interdigit 3
    description HuntGroup 1 Line 13
    station-id number XXXXXXXXXX
    caller-id enable
    Message was edited by: Thomas Schmidt
    Added CCSIP Debug and Router Config.

    Hi.
    Can you please attach the complete config and a debug ccsip message?
    Thanks
    Regards
    Carlo
    Sent from Cisco Technical Support iPhone App

  • WebService is not shown in WSIL file

    Dear All,
    We are working on PI 7.1 EHP1, we have made a Scenario and published as a Web Service from Sender Agreement to the Service Registry of PI Server. The Web Service is visible in SR of PI Server, but when i am accessing the link of WSIL file http://xiserver:xiport/inspection.wsil then it not shown in this file.
    Please let us know how to make Web Service visible in WSIL file.
    regards,
    Ravi Siddam

    Seems like the default WSIL resource doesn´t include the PI SOAP Adapter WebServices. You can use the correction of SAP Note 1505853 in order to enable the PI specific WSIL resource http://DirectoryHost:Port/dir/inspection.wsil
    which should include all WebServices configured via the SOAP Adapter
    Regards,
    Matthias

  • External-graphic not shown in PDF with Tomcat / Cocoon / Ubuntu

    Hi,
    this weekend I set up a virtualbox with Ubuntu 8.04 OS; APEX 3.12 @ Oracle 10gXE; Tomcat 6.014; Cocoon 2.1.11; fop_post sitemap file according to Carl Backstrom blogpost ([http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html]); to experiment with APEX & PDF printing.
    Tomcat is configured to listen to port 8888; APEX to 8080.
    I have setup APEX according to Carl's blogpost. All is working fine; I can generate PDF reports using the standard templates. I'm new to XSL, but decided to go wild. I decided to include a JPG graphic.
    I followed the example in Scott & Spendolini, Pro Oracle Application Express, page 399. However the image is not shown in the PDF, nor is there an error message produced. What is wrong?
    This is the relevant section of source code I have used:
    &lt;fo:static-content flow-name="region-footer"&gt;
    &lt;fo:block xsl:use-attribute-sets="text footer"&gt;
    &lt;fo:inline xsl:use-attribute-sets="body-font page-number"&gt;
    &lt;fo:external-graphics width="50px" height="50px" src='url("http://www.fiat128.nl/images/fiat128.jpg")'/&gt;
    &lt;fo:page-number/&gt;
    &lt;/fo:inline&gt;
    &lt;/fo:block&gt;
    &lt;fo:block xsl:use-attribute-sets="text text_2 #PAGE_FOOTER_ALIGNMENT#"&gt;
    &lt;fo:inline xsl:use-attribute-sets="page-footer"&gt;#PAGE_FOOTER#&lt;/fo:inline&gt;
    &lt;/fo:block&gt;
    &lt;/fo:static-content&gt;
    all help is appreciated. Is there a problem with Cocoon and Linux?
    many regards,
    Ronald van Dijk
    Edited by: user614694 on Oct 6, 2008 3:09 AM
    Edited by: Ronald van Dijk on Oct 6, 2008 3:10 AM

    Hello Ronald,
    Your code looks fine to me. Although xsl-fo is not very friendly for a slight change...
    This is an example I use during my PDF printing presentation:
    <fo:static-content flow-name="region-header">
    <fo:block xsl:use-attribute-sets="text text_2 text_0 #PAGE_HEADER_ALIGNMENT#">
    <fo:inline xsl:use-attribute-sets="page-header">#PAGE_HEADER#</fo:inline>
    </fo:block>
    <fo:block border="0.5pt solid silver"
    background-image="url('http://o11g1.apex-evangelists.com:7779/i/htmldb/apex_logo.gif')"
    padding="12pt"
    text-align="center">Apex Evangelists
    </fo:block>
    </fo:static-content>
    Does that work for you?
    (change o11g1.apex-evangelists.com:7779 to your hostname:port - and see that you get the image by using the url)
    I've sometimes seen problems displaying certain pictures or specifying the width.
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

  • SRM-MDM Catalog: Images not shown in search ui - only placeholder visible

    Hello Expert,
    we have the problem, that the images, which we imported into the repository using the Data Manager are not shown in the search ui. The image is visible in the Data Manager and assigned to a product.
    If I make a right-click on the image in the brower,  I get a URL like this
    http://[server]:port]/webdynpro/resources/sap.com/tc~mdm~srmcat~uiprod/Components/com.sap.mdm.srmcat.uiprod.ItemDetails/null//Images?id=1&variant=Thumbnail&cachePath=/tmp/largeObjectRepositoriesCachedFolder/kfw-mdm-ae54/RepositoryPort_2010/User1&relativePath=t07/0000000/r00001v-2.jpg
    Regards,
    Sven
    Edited by: Sven Haustein on Oct 16, 2008 3:28 PM

    Hi,
    we are using SRM-MDM Catalog 2.0 SP04 Patch 01 (5.5.63.65)
    Retrieving MDM JAVA API Version
    Admin Version = 5.5.63.02 [Interface CRC=0x5b63a633]
    Build Version = 5.5.63.102
    Content Version = 5.5.63.09 [Interface CRC=0x9d7cb0c4]
    Meta Version \t= 5.5.63.00 [Interface CRC=0xab59b8dc]
    !======================================!
    Building up connection to MDM Server 10.130.32.81
    Retreiving MDM Server Version
    Version = Version 5.5 SP6 (5.5.63.65)
    Regards,
    Sven

  • Books on iPad not shown under iPad tab in iTunes

    For some reason existing ebooks on my iPad mini are not visible under the "Books" sidebar entry inside iTunes, under the "On This iPad" tab. I can add books to iBooks on the iPad by dragging them to the iPad icon inside iTunes, and the books transfer OK; they simply are not shown in the list in iTunes. I have another iPad which works fine, i.e. books on the iPad shows up in the list; same with an iPhone which works correctly. Alldevices have synch switched off so I manually add books (and music; music list works fine on all of them so it is only books having the problem).
    This is frustrating since it means I cannot remove books from the iPad using iTunes. Deleting all the books on the iPad (by doing it inside the iBooks app on it), deleting the iBooks app itself, rebooting, and then re-adding books does not help. Also, the iPad in questio  was recently reset using an iCloud backup which did not change the situation.
    So any ideas why my iTunes insists there are no books on this particular iPad, even though iTunes happily transfers them?

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • Restricting FXS ports to internal calls only

    Hi,
    I have recently intalled Call Manager 8.5.1 with a H323 Gateway. On the gateway, I have a number of FXS ports for lobby phones. Is there a way I can restrict these phones to allow only internal calls only? Do I need to use COR lists like in Call Manager express or is there a  more practical way?
    Thanks,
    Derek

    Hi Derek,
    It sounds like these FXS ports are NOT registered to CUCM 8.5.1?  If they aren't, then yes COR lists is the most pratical way to do this.  You could do a "connection plar xxxx" to a receptionist extension and her her/him forward the calls to the correct extension.

  • MGCP FXS ports requires a license in CUCM9

    Hello!
    I am connecting Some analoge phones to VG350 FXS ports which is  configured as a MGCP Gateway in CUCM. I beleive MGCP did not requires any license for it. Can some confirm this ? is there any Cisco doc on it ?
    Thanks & Regards,

    Hi Sambit,
    Technically u are correct but legally I think u would be requiring license.
    even the ordering guide says Analog devices are supported with Essential USer license  and must be purchased through UCL.
    http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/finalcopy.pdf
    regds,
    aman

  • Hdmi option not shown in preferences

    hdmi option not shown in preferences

    What are you expecting?
    Do you have anything connected to the HDMI port?

  • Door entry system on FXS port of UC320W

    Hello,
    I have inherited a door access system with no information on it.  I have plugged it in to the FXS port on the UC320W and assigned it extension 199.  I can dial 199 and press "8" and the door opens, so it is going well.
    My problem is I don't know what number the door is auto dialling when you press the call button at the door end.  I can hear the tones, so I know it is three digits, but I have no idea what they are.  Is there any way to monitor the FXS port to see what number is being dialed when I press the call button?
    Cheers,
    Tony

    This is the log, am I right in thinking it is dialing "5" or "325"?
    Jul  5 15:38:42 UC320W user.debug voice: INVITE sip:[email protected]:6060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.1:5080;branch=z9hG4bK-c3a41e2b
    From: "Door" ;tag=15b8fd873df7b9cbo0
    To:
    Call-ID: xxxxxxxx
    CSeq: 101 INVITE
    Max-Forwards: 70
    Contact: "Door"
    Expires: 240
    User-Agent: Cisco/UC320W-2.3.2(6)
    Allow-Events: talk, hold, conference, x-spa-cti
    P-Mailbox: 5199
    Content-Length: 325
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: x-sipura, replaces
    Content-Type: application/sdp
    v=0
    o=- 2244391 2244391 IN IP4 10.1.1.1
    s=-
    c=IN IP4 10.1.1.1
    t=0 0
    m=audio 16476 RTP/AVP 0 2 8 18 100 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:2 G726-32/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729a/8000
    a=rtpmap:100 NSE/8000
    a=fmtp:100 192-193
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:30
    a=sendrecv
    Jul  5 15:38:42 UC320W user.debug voice: SIP/2.0 404 Not Found
    To: ;tag=1a27709e-0
    From: "Door" ;tag=15b8fd873df7b9cbo0
    Call-ID: xxxxxxxxx
    CSeq: 101 INVITE
    Via: SIP/2.0/UDP 10.1.1.1:5080;branch=z9hG4bK-c3a41e2b
    Server: Cisco/UC320W-2.3.2(6)
    Allow-Events: talk, hold, conference, x-spa-cti
    Content-Length: 0
    Jul  5 15:38:42 UC320W user.debug voice: ACK sip:[email protected]:6060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.1:5080;branch=z9hG4bK-c3a41e2b
    From: "Door" ;tag=15b8fd873df7b9cbo0
    To: ;tag=1a27709e-0
    Call-ID: xxxxxxxx
    CSeq: 101 ACK
    Max-Forwards: 70
    Contact: "Door"
    User-Agent: Cisco/UC320W-2.3.2(6)
    Allow-Events: talk, hold, conference, x-spa-cti
    P-Mailbox: 5199
    Content-Length: 0

Maybe you are looking for