Client 64 or 32 bit

How do i check is my client 32 or 64 bit on AIX servers. installed 11.2.0 version
thanks
Edited by: user0364 on Apr 21, 2010 6:50 AM

You still get the executable "ttVersion" with a client-only install, so you could run that and it would tell you whether your TT client installation is 32bit or 64bit.

Similar Messages

Error in installation of 64 bit 11g client on solaris sparc64 bit

hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-Shubhen

user12052679 wrote:
hi,
i am getting below error while installing the 11g 64 bit client on solaris sparc 64 bit machine.
following error is occurred while installing 64 bit oracle 11.2 client on Solaris 64-bit sparcv9 OS:
Pl read the Install Guide to ensure you meet all of the pre-installation requirements - http://docs.oracle.com/cd/E11882_01/install.112/e24347/pre_install.htm#CIHFICFD
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
kindly assist.
Thanks,
-ShubhenHTH
Srini

Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
Alex

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Problem in accessing the url on client with win7 64 bit

Hello experts,
we recently install fusion 11.1.2.1.0 and database 11g.
scenario:
database server:(192.168.1.100)
plateform: window server 2008, 64 bit
product: oracle database 11g.
application server:(192.168.1.101)
plateform: window server 2008 64 bit
product: oracle fusion 11g(forms and report)
i sucessfully install and configure the forms configuration. my application is running on same application server.
url to access the application:
http://aserver:9001/forms/frmservlet?config=erp
url is accessing on the application server as well as client having 32 bit xp operating
system after insatlling the java.
but if same url is accessing on database server and clients with window7 64 bit, not accessing after installing the java as well.
please help
thanks
yash

Hi Amit
We also have this issue with weblogic webservices. Did you get any resolution for this issue.
When the service is executed for lesser number of hits, all the responses are processed properly. But as load (Number of hits for the same service) increases, few responses are failed to be parsed in the web service client. We could confirm that the producer responds with proper content type (text/xml)
Any help or pointers will be greatly appreciated.
Thanks,
Finny

Is there an Oracle VPN client for Linux (64-bit) ?

Does anyone know if there is an Oracle VPN client for Linux (64-bit) ?
Where to get it ?
How to install it ?
thanks!
Greg

Perhaps OpenVPN will work for you. Unfortunately you did not provide any OS information and VPN requirements.
You can find help to install and setup OpenVPN in Google. You might want to check the Fedora EPEL repository http://fedoraproject.org/wiki/EPEL to install the software using standard yum in Enterprise Linux.

VPN Client and Vista 64-bit

We have several laptops that we need to install Vista on. We would prefer 64-bit so that we can really make use of the extra RAM these laptops have, however there is one program we require holding us back to 32-bit at the moment. Its the Cisco VPN Client. We have PIX 500 series hardware so we don't have any other VPN option right now.
All I would need to know is that Cisco does indeed plan to release a Vista 64-bit compatible of the software sometime soon (say in the next quarter).
Does anyone know if this is planned or not? Or is there some technological barrier keeping them from doing it?

February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.

Error while Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

I tried to install 32 bit drivers after installing the 64 bit drivers. The installer won't let me do it, claiming that [INS-32025] the chosen installation conflicts with software already installed in the given Oracle home. How can I get the 64 and 32 bit drivers to coexist?

Message indicates attempted installation in existing Oracle Home. Choose a new home and location for the 32-bit Client.

Printing from a 32 bit client in a 64 bit environment (laserjet 4000 n with windows 7)

I have a HP laserjet 4000n connected to a 64 bit windows 7 machine. Another client (32 bit) on my network wants to print to that printer. I saw on the support website instructions for how to do this:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
So far, I have installed the 64 bit driver (just re-installed and I can print from the 64 bit server).
I then downloaded the 32 bit driver files (for PCL 5) and saved them.
I then went to the printing properties of the printer and chose advanced drivers and checked the box "x86". The instructions called for finding the file "hpcuXXXc.inf". In the printer driver folder, there were 2 subfolders - one marked 64 bit and inside that folder was a file "hpcu112t.inf" (file ends in "t" not "c") - so I chose that file and pressed ok and got the following error message:
The specified location does not contain the driver HP LaserJet 4000 Series PCL5 for the requested processor architecture.
I then downloaded more drivers (for PCL 6 - even though my printer is labelled PCL 5). This time, I got no 64 bit subfolder (only one folder labelled windows vista). However , there WAS a file labelled "hpcu112c" this time - so I chose that and still got the same error message.
Help!?
Thanks.
Janc

Phychopomp1,
Windows 7 64 bit is able to run 32 bit programs. However, some programs will have issues.
Have you checked your programs against the Windows 7 compatibility list: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=2394
This should tell you if they are compatible or not with Windows 7 64-bit.
There are compatibility settings that you can try once you have installed the software also. Right click on the shortcut and choose properties, then go to the compatibility tab and try the various OS settings.
If those things fail, then you should try Windows XP Mode (convenience link: http://www.microsoft.com/windows/virtual-pc/download.aspx). This will allow you to install your programs in a virtual copy of Windows XP SP3 using Windows Virtual PC. Once XP Mode is installed, when you install your software into it, you will get a shortcut to use the program from your Windows 7 start menu without even seeing the XP Mode window.
Hope this helps,
David
Windows Outreach Team – IT Pro
http://www.microsoft.com/springboard

Mobile client for windows 64 bit

Is there a mobile client that works on windows 64 bit?
just been asked to test out our app on a windows 7 laptop and it fails straight away with UnsatisfiedLinkError: c:\mobileclient\bin\oljdbc40.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Cannot see anything in the oracle downloads, but they are in Berkeley mode now rather than the traditional stuff.

Not a proper solution, but i have found a work around for the problem
The windows 7 64 bit machine had java 1.6.0_16 installed as the default (we have a problem with a change to the toDate function tightening things up in 1.6.0_18 causing exceptions in our 3rd party software).
We also had an application that was bundled with its own JRE 1.6.0_06 on the machine and when i switch the application code to point at that JRE everything works fine. Not a java person, but i assume that somewhere between 1.6.0_06 and 1.6.0_16 SUN added true 64 bit support and this requires all libraries to be in line. The older version not knowing anything about 64 bit could cope, but obviously without making best use of the device resources
as we have a work around for the time being, i will probably leave this issue until we start on investigating the migration to berkeley in the new year
Edited by: GaryW on Nov 4, 2010 9:54 AM

Not able to install Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

I am having issues. I get "Central Inventory is not locked" and Oracle 11g R2 just closes itself.
I had some previous installations of Oracle, but I am unsure how to get rid of them all. I already removed the registry keys associated with Oracle. Any help here?

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Windows 8 installation of VPN Client Software (x86 64-bit version) results in "Icon09DB8A851.exe" on startup task

I've just installed a VPN Client Software for x86 64-bit version of Vista and Windows 7 (vpnclient-winx64-msi-5.0.07.0440-k9.exe) to Windows 8. It's working without problem except that it seems to add an entry "c:\Windows\Installer\{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D}\Icon09DB8A851.exe" onto startup task. I suspect the installer program (InstallShield) is not working properly. I'd like to know if anyone has same issue or my computer got infected in malware.

Hi I have installed and config to my client a ASA 5515 and everything is fine but. When I config L2TP/IPSEC VPN for the remote work bang I have a problem. When I config L2TP/IPSEC VPN to Windows 7 with native client on Windows everything is fine, but in Windows 8.1 is bad on 1 hour after VPN connection Windows 8.1 tries to renegotiate the connection and something happens and the connection is disconnected.
LOG:
5
Feb 14   2014
14:53:07
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x869df107, Outbound SPI = 0xfb02e574
4
Feb 14   2014
16:41:08
113019
Group =   DefaultRAGroup, Username = s.choraliev, IP = XXX.XXX.XXX.XXX, Session disconnected. Session   Type: L2TPOverIPsecOverNatT, Duration: 1h:48m:01s, Bytes xmt: 29765217, Bytes   rcv: 9633270, Reason: L2TP initiated
5
Feb 14   2014
16:41:09
713119
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 1 COMPLETED
6
Feb 14   2014
16:41:09
602303
IPSEC: An   outbound remote access SA (SPI= 0x805CA50C) between XXX.XXX.XXX.XXX and XXX.XXX.XXX.XXX (user= DefaultRAGroup) has been   created.
5
Feb 14   2014
16:41:09
713049
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, Security negotiation complete   for User () Responder, Inbound SPI = 0x9a7f5ac6, Outbound SPI = 0x805ca50c
5
Feb 14   2014
16:41:09
713120
Group =   DefaultRAGroup, IP = XXX.XXX.XXX.XXX, PHASE 2 COMPLETED   (msgid=00000001)
And the VPN session is stack.

Installing 10g client on windows7 64 bit. ( 11g r2 already installed)

I am a fiscal auditor auditing data on databases with hundreds of millions rows. So not a professional database expert.
I have Oracle 11.2.0.1.0 installed on Windows 7 64 bit ultimate
I want to import data from warehouse which has Oracle 10.2.0.4.0 installed.
When I try to import
impdp usr/pass@WAREHOUSE TABLES=TABLE DIRECTORY=DATA_PUMP_DIR NETWORK_LINK=D_W VERSION=10.2
It gives :
UDI-00018: Data Pump client is incompatible with database version 10.2.0.4.0
To overcome version incompatibility, I think I need to install 10g client on my computer.
But I already have 11gr2 database installed, so I wanted to learn about potential problems.
Especially about having two Oracle Homes, tnsnames.ora files, which 10g client version, etc..
Step by step explanation is highly appreciated.
Thanks.

orafad wrote:
Are you connected to the target or source database with impdp? Db link for source db to be used in NETWORK_LINK argument, in which database does it exist?
Again, show impdp command session (copy-paste)
orafad thanks, I understand my mistake but I encountered a new one.
I was using source username/pass for impdp, it was wrong I should use target username.
Here is the result now:
SQLPlus: Release 11.2.0.1.0 Production on Pzt Ara 26 13:52:58 2011*
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: target_usr
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
*> $*
*Microsoft Windows [Sürüm 6.1.7600]*
Telif Hakkı (c) 2009 Microsoft Corporation. Tüm hakları saklıdır.
D:\app\direct\product\11.2.0\dbhome_1\BIN>impdp target_usr/target_pass network_link=ambar
Import: Release 11.2.0.1.0 - Production on Pzt Ara 26 13:53:23 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31631: privileges are required
ORA-39149: cannot link privileged user to non-privileged user
Source schema has the exp_full_database privilege, so I don't understand why this happens.
select privilege from user_sys_privs minus select privilege from user_sys_privs@ambar;
     PRIVILEGE
1     ALTER TABLESPACE
2     CREATE TABLESPACE
3     DROP TABLESPACE
select privilege from user_sys_privs@ambar minus select privilege from user_sys_privs;
     PRIVILEGE
1     CREATE ANY VIEW
2     ENQUEUE ANY QUEUE
3     EXECUTE ANY CLASS
4     EXECUTE ANY EVALUATION CONTEXT
5     EXECUTE ANY INDEXTYPE
6     EXECUTE ANY LIBRARY
7     EXECUTE ANY OPERATOR
8     EXECUTE ANY PROCEDURE
9     EXECUTE ANY PROGRAM
10     EXECUTE ANY RULE
11     EXECUTE ANY RULE SET
12     EXECUTE ANY TYPE
13     EXEMPT ACCESS POLICY
14     EXEMPT IDENTITY POLICY
15     EXPORT FULL DATABASE
16     FLASHBACK ANY TABLE
17     FORCE ANY TRANSACTION
18     FORCE TRANSACTION
19     SELECT ANY TABLE
select granted_role from user_role_privs minus select granted_role from user_role_privs@ambar;
     GRANTED_ROLE
1     IMP_FULL_DATABASE

Installing 32-bit client on windows 64-bit

Hi friends,
I've installed 64-bit Oracle software and database on Windows 2008 64-bit server. We have created this server to troubleshoot something at 3rd party location and our application will be on the same server as the database. Our application is not compatible with 64-bit client so is it possible to install 32-bit Oracle client on this system with 64-bit oracle database running? Do I have to make any changes to the path for the application to use 32-bit cilent?
THanks a lot

newbiegal wrote:
Hi friends,
I've installed 64-bit Oracle software and database on Windows 2008 64-bit server. We have created this server to troubleshoot something at 3rd party location and our application will be on the same server as the database. Our application is not compatible with 64-bit client so is it possible to install 32-bit Oracle client on this system with 64-bit oracle database running?yes
Do I have to make any changes to the path for the application to use 32-bit cilent?yes

Error Installating Lync Client 2013 Basic 32-bit

Hi,
We're implementing Lync in our office and have already deployed a server and working with a few pilot users.
one of the users, I've tried installing Lync Basic Client (32bit), always gives an error.
During installation, it would stop in the middle and would say that it would need to restart. We're already restarted twice and yet same error occurs.
The desktop is a Windows 8 machine with Office 2010 installed.
Any help?
Regards
Eisen

What is the error did you get?
On Windows 8 computer, I installed Office 2010 and Lync Basic client (32 bit).
I didn’t have the same problem.
Please try to uninstall Office 2010 first and install Lync Basic client.
Lisa Zheng
TechNet Community Support

CRM Mobile Client Installation on 64 Bit Hardware/64 Bit OS..

I have a question related to Mobile Client components installation.
1) When we were trying to insall the communication station at our client system which are on 64 bit OS on Xeon 64 bit Hardware, we were facing a lot of issues in connecting to the CRM Server,,,When checked for the SAP note we found through one as 64 bit Xeon processor is not supported for the installation of Communication Station,, We tried installing the Comm Station in our local landsacpe and went on successfully done...
Now my question is : Does VMWare/64 bit Hardware supports the Mobile Client Components installation or not?
2) We are facing a prob when trying to install the Mobile Development Workstation: The issue is the installation option of selecting the MDW is greyed out and at the bottom it says that pre-requisites should be fulfilled wherein we have taken enough care in meeting them...
Please let us know how to proceed with the installation...
Please do send the documents if any on CRM Mobile Client Components..as we need to deliver to the client on priority basis...
Thanks in Advance:
Raghunandan

Hi Raghunandan,
In reply to your first query regarding supportability of Supportability of Commstation on Intel xeon 64 Bit processor.
This is not supported by SAP. Refer to Note 1131463.
There were some compatibility issues with this last year. Decision was it will not be supported.
For the MDW install problem, this only occurs when the prerequisites are not correct. Check through the install guide again. Check there are no conflicting versions of JRE for example. Probably best to install this on a clean machine.
Regards,
Gervase

Client 64 or 32 bit

Similar Messages

Maybe you are looking for