Client 7.03 intermittent error codes

Our users are experiencing intermittent error codes more frequently in the last few months.
Error codes 8201, 8209 and other errors which directly affects accessing documents in DMS. Generally we suggest they close and reopen their GroupWise client (a mix of 7.02HP & 7.03) and this seems to work.
There have been no updates or changes to the server (ver 7) and no updates to clients other than upgrading clients from 7.02HP to 7.03 as a means to fix these errors, although the errors are generated in both clients. We do have a few users with client 6.56 due to the problem with displays of custom lookup tables and have experienced similar problems.
Has anyone else experienced users with error codes losing their ability to open documents?
Any and all suggestions welcome
Thanks
Dianne

I am getting this compaint also, closing and re-opening the client does allow the user to access the document. The document properties activity log shows the document being opened by the user, but the doc status has to be reset on closing the client. Sometimes, the document does not open, does not return an error, just appears to do nothing. POA logging is set to verbose and there does not appear to be any useful information there. We are running a mix of client 7.0.2 and 7.0.3 (non-hp1), 7.0.3HP1 on the NLM's on NW6.5.7. If anyone knows which client release works with DMS and does not make us look bad, please let me know.,...
"Matt Schlawin" <[email protected]> wrote in message news:[email protected]...
Dianne,
Occasionally I get a call that users are getting a message saying they cannot open any of their documents. I have them reboot and it fixes it. So far I have not looked into it much because it happens so seldom.
We are running GW7.03 on SLES10 so unless I restart the agents with the --show switch, I do not see errors. Next time it happens I'll look in the log files to see if it is a client issue or a server issue.
Matt
>>> On 10/23/2008 at 3:06 PM, in message <[email protected]>, Dianne2006<[email protected]> wrote:
Our users are experiencing intermittent error codes more frequently inthe last few months.
Error codes 8201, 8209 and other errors which directly affectsaccessing documents in DMS. Generally we suggest they close andreopen their GroupWise client (a mix of 7.02HP & 7.03) and this seems towork.
There have been no updates or changes to the server (ver 7) and noupdates to clients other than upgrading clients from 7.02HP to 7.03 as ameans to fix these errors, although the errors are generated in bothclients. We do have a few users with client 6.56 due to the problemwith displays of custom lookup tables and have experienced similarproblems.
Has anyone else experienced users with error codes losing their abilityto open documents?
Any and all suggestions welcome
Thanks
Dianne-- Dianne2006------------------------------------------------------------------------Dianne2006's Profile: http://forums.novell.com/member.php?userid=35019View this thread: http://forums.novell.com/showthread.php?t=348532

Similar Messages

Error in push sccm client CcmSetup failed with error code 0x80070643 ccmsetup sccm 2012

i want to push sccm client for all computer i enable automatic side-wide client installation
some computer get error code 0x80070643
ccmsetup sccm 2012 this
when i tray manual installation get same error and ccmsetup.exe stopped

Duplicate of
https://social.technet.microsoft.com/Forums/en-US/3bac4677-46b0-4d96-b63d-a819efcc7f35/error-in-push-sccm-client-ccmsetup-failed-with-error-code-0x80070643-ccmsetup-sccm-2012?forum=configmgrgeneral
Please don't double post.
Jason | http://blog.configmgrftw.com | @jasonsandys

DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
Matthias

Hi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

SCCM Client Instalaltion failed with error code 1624

Folks,
I am getting clients installation failed exit code 1624 and
CcmSetup failed with error code 0x80070658

- Check the access to the adminshare from the SCCM server
\\computer\admin$
- Run the wbemtest.exe to see if you can connect to the systems namespace
- Verify DNS records on your DNS server
- Renew dns
Ipconfig /flushdns
Ipconfig /registerdns
Kind regards,
Tim
MCITP, MCTS, MCSA
http://directoryadmin.blogspot.com
This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
"If this thread answered your question, please click on "Mark as Answer"

SCCM Client.msi failed Exist Error Code 1603

Hello ,
I tried my level best failed to figure out the issue
I did WMI rebuild, Restart, re-install client and all
The CCMSETUP.log file giving below error message
C:\windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation failed. Error text: ExistCode :1603
Action:
Errormessages:
Nexttry 120 Minutes
Cheer's up
Best Regard's Krishna

MSI (s) (30:D4) [13:40:24:694]: Product: Configuration Manager Client - Update 'CLP1041' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
MSI (s) (30:D4) [13:40:24:701]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP1041. Installation success or error
status: 1603.
MSI (s) (30:D4) [13:40:24:702]: Product: Configuration Manager Client - Update 'CLP1046' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
MSI (s) (30:D4) [13:40:24:702]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP1046. Installation success or error
status: 1603.
MSI (s) (30:D4) [13:40:24:702]: Product: Configuration Manager Client - Update 'CLP2052' could not be installed. Error code 1603. Additional information is available in the log file C:\windows\ccmsetup\Logs\client.msi.log.
MSI (s) (30:D4) [13:40:24:702]: Windows Installer installed an update. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: CLP2052. Installation success or error
status: 1603.
MSI (s) (30:D4) [13:40:24:703]: Note: 1: 1708
MSI (s) (30:D4) [13:40:24:703]: Product: Configuration Manager Client -- Installation operation failed.
MSI (s) (30:D4) [13:40:24:703]: Windows Installer installed the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c7.msp
MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c8.msp
MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
MSI (s) (30:D4) [13:40:24:704]: Attempting to delete file C:\windows\Installer\f2319c9.msp
MSI (s) (30:D4) [13:40:24:704]: Unable to delete the file. LastError = 32
MSI (s) (30:D4) [13:40:24:708]: Deferring clean up of packages/files, if any exist
MSI (s) (30:D4) [13:40:24:708]: Attempting to delete file C:\windows\Installer\f2319c7.msp
MSI (s) (30:D4) [13:40:24:709]: Attempting to delete file C:\windows\Installer\f2319c8.msp
MSI (s) (30:D4) [13:40:24:709]: Attempting to delete file C:\windows\Installer\f2319c9.msp
MSI (s) (30:D4) [13:40:24:709]: MainEngineThread is returning 1603
MSI (s) (30:E4) [13:40:24:711]: RESTART MANAGER: Session closed.
MSI (s) (30:E4) [13:40:24:711]: No System Restore sequence number for this installation.
=== Logging stopped: 12-09-2014 13:40:24 ===
MSI (s) (30:E4) [13:40:24:713]: User policy value 'DisableRollback' is 0
MSI (s) (30:E4) [13:40:24:714]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:E4) [13:40:24:714]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [13:40:24:714]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [13:40:24:714]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [13:40:24:714]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:E4) [13:40:24:714]: Restoring environment variables
MSI (s) (30:E4) [13:40:24:715]: Destroying RemoteAPI object.
MSI (s) (30:04) [13:40:24:715]: Custom Action Manager thread ending.
MSI (c) (EC:C8) [13:40:24:717]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (EC:C8) [13:40:24:717]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12-09-2014 13:40:24 ===
Best Regard's Krishna

WDS PXE Problems on 1 model of PC only - The following Client failed TFTP Download - Error Code 1460

Hey all,
I am experiencing a problem with my WDS PXE Environment, with 1 specific model of PC's only. This is a Dell XPS machine with an Intel e1000 nic in it.
The problem is that when you PXE Boot, it starts off fine, and I reach a menu that has all of my boot images listed, but as soon as you pick one it hangs on a black screen.
From the event viewer on the server I can see the following entry:
The Following Client failed TFTP Download:
IP: 10.130.148.211
Filename: \Boot\Boot.SDI
ErrorCode: 1460
I've done some google searching and found some topics that could be related, but none of the fixes mentioned helped me. This is the one I tried:
http://social.technet.microsoft.com/Forums/en-US/winserversetup/thread/a1246f62-6a8a-482b-9323-7e02dfeab196/#52aaf6fb-9494-4327-bbc3-8afe3e78905c
The problem I had was that the link they gave to the Hotfix, doesnt actually have anyway to download the hotfix!!
http://support.microsoft.com/kb/975710
Although
I am not convinced that packet size is the problem here, more likely some network or disk controller driver issues??
No
idea at all where to go from here. It is only this one model of PC that fails, and all others work fine. If someone can point me in the right direction it would be very greatly appreciated.
I
would be happy to provide you with any additional details you may require.
Thanks,
-Ben

You need to contact CSS to get this fix.
Hotfix Information
A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore,
if you are not severely affected by this problem, we recommend that you wait for the next Windows Server 2008 service pack that contains this hotfix.
To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers
and information about support costs, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=support (http://support.microsoft.com/contactus/?ws=support)
John | Program Manager | System Center Configuration Manager

IE11 installation fails with error code 4007 (USER_ERROR_MISSING_REQUIRED_PREREQUISITE)

Hello there
I'm having troubles with the installation of IE11 on Win7 over software deployment: Some clients fail with the error code 4007:
USER_ERROR_MISSING_REQUIRED_PREREQUISITE
All prerequired updates for IE11 (http://support.microsoft.com/kb/2847882/en)
are approved for installation:
2729094
2731771
2533623
2670838
2786081
2834140
However, KB2731771 will not install on the clients with the status: Not applicable. I think, this might cause the problem and I'm wondering, why this update will not install.
Thank you for your ideas and advise.
Cheers,
Simon

Hi,
For Windows update 2731771, please make sure that you've approved the right version for your clients, x86 package or x64 package.
The error indicates that the failed IE installation is caused by the failed prerequisite, so as
Alex_zz mentioned, we can refer to the ie 11 main log to find more detailed information, you can also locate to
%windir%\logs\cbs
%windir%\Windowsupdate.log
to find the detailed information of the failed update.
Yolanda Zhu
TechNet Community Support

10.2.8 Client, error code -1712

Suddenly last week after several months of working fine, our 10.2 and 10.4 clients couldn't login. The 10.3 clients login to Network Home Directories just fine. You can use the same network account login on 10.3 client and it responds. A login on 10.2 or 10.4 does not. Apple support has not been successful either.
10.2 stays on the login window for hours. The barber pole keeps going. 10.4's login window goes dull and eventually will time out.
The server is an Xserve with 10.3.9 Server running.
I've run Repair Permissions, Disk Repair and Disk Warrior. I reimaged the client with our stand .dmg. It logged in OK until I updated it via Software Update.
Eventually if you leave the 10.2 client trying to login for hours a Desktop will be displayed and the message,
"The Operation could not be completed. An unexpected error occurred (error code -1712)"
I'm at my wit's end. I don't have enough money to upgrade all the Jaguar to Tiger or Panther. I'm hoping someone here has some insight. Thanks.
10.2 and 10.4 clients Mac OS X (10.2.x)

Check your 10.2.8 machines Directory Access and make sure LdapV2 is not checked and also that Ldap V3 is checked and configured correctly. I found that if I had both Ldapv2 and v3 on my 10.2.8 clients could not log in. 10.3 clients only have the option for Ldap V3, so it is not an issue.

Not able to get the error code when the client ,server running in Diff JVM

Hi ,
My server code is running on websphere App server . My client is running on different JVM on my machine .
When I try to throw my own exception , I am not getting any data in the exception object.
I am setting error code and msg in the exception object.
But when i retrive from my client , it is returning the null.
Can some one throw some info regrading this .

Hi,
Did this issue occur on all clients?
Please run ipconfig /all command on this problematic computer, and then post the screenshot here.
In addition, update your network adapter, disable the firewall and anti-virus temporarily and then run these commands:
netsh winsock reset catalog
netsh int ip reset
Meanwhile, please refer to this article to troubleshoot:
DHCP Clients Are Unable to Get IP Addresses from a DHCP Server
http://support.microsoft.com/kb/197197/EN-US
Karen Hu
TechNet Community Support

Intermittent behavior and Error Code: -600

I would first like to state, I have not any issues in the last 5 years. I went from Jaguar to Tiger, without a hitch. Of course, this is very old G4/450 [Will be getting a Mac Pro fairly soon]. For the most part, everything has been near perfect. However, recently I installed ProAppRuntime.pkg v.4.0. Now, I have intermittent problems with applications that suddenly stop functioning correctly. This is usually preceded by getting the spinning beach. Today, iTunes just stopped working, ultimately forcing me to have to Force Quit the application. Then, once one app does it, if bad enough, other apps start to collapse as well. Now, even though it may seem like I Force Quit, the Dock still shows the App as still functioning. It won't force quit at all. Then if I try to relaunch the App, directly, The error I get is Error Code: -600. There is very little read about it for me to make any sense of it. I ran Virex [yes, up to date], which as usual, there is nothing to fret about there. Though, it has been a while since I de-fragged my drives. But, I can't imagine that would be the cause of the problem... or would it?
Update: I can repeat this intermittent problem using iTunes v. 7.1.1.
G4/450 with 768MB of RAM, Two Seagate 80GB HD's, with SCSI card with two SCSI drives. Running Mac OSX Tiger v.10.4.9.

On my System/Apps HD 80GB [Master] = 57GB of Free Space.
On my Second HD [Slave] = 27GB of Free Space
On My 3rd HD 17GB Internal SCSI = 811MB of Free Space
[this is where all my music is stashed]
On my 4th HD, 4GB Internal SCSI = 1.2GB of Free Space
OS9 HD/OS9 Apps.
Yes, all RAM is listed. I did some investigation, checked that as well. Then I ran a couple of utilities, iDefrag to see if the drive are in need of defragging, it looked like I should consider defragging. However, I ran Onyx, just clean out my caches before I CCClone to alternative drive and it told me "This Volume needs to be Repaired". So, I think I've got my answer.
If anything, thank you in advance for any advice you leave, I am going to start of OSX CD and see what's up.

Client not updating - Error Code # 0x80244023 and 0x801901f8

Hello All,
We have a Windows server (2008) which is not pulling updates from WSUS server. It has two NICs - one is public and another is configured with
172.x.x.x range for Admin use (this is for WSUS communication with no DNS setup).
See logs below,
2014-05-07        13:05:50:089     916      1410     Misc
=========== Logging initialized (build: 7.6.7600.256, tz: +0800) ===========
2014-05-07        13:05:50:089     916      1410     Misc
= Process: C:\Windows\system32\svchost.exe
2014-05-07        13:05:50:089     916      1410     Misc
= Module: c:\windows\system32\wuaueng.dll
2014-05-07        13:05:50:089     916      1410     Service *************
2014-05-07        13:05:50:089     916      1410     Service ** START
** Service: Service startup
2014-05-07        13:05:50:089     916      1410     Service *********
2014-05-07        13:05:50:091     916      1410     Agent
* WU client version 7.6.7600.256
2014-05-07        13:05:50:092     916      1410     Agent
* Base directory: C:\Windows\SoftwareDistribution
2014-05-07        13:05:50:092     916      1410     Agent
* Access type: Named proxy
2014-05-07        13:05:50:092     916      1410     Agent
* Default proxy: proxy:8083
2014-05-07        13:05:50:093     916      1410     Agent
* Network state: Connected
2014-05-07        13:05:50:520     916      1410     DtaStor Default service
for AU is {00000000-0000-0000-0000-000000000000}
2014-05-07        13:05:50:531     916      1410     DtaStor Default service
for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-07        13:05:50:539     916      1410     Agent
WARNING: Failed to read the service id for re-registration 0x80070002
2014-05-07        13:05:50:539     916      1410     Agent
WARNING: Missing service entry in the backup data store; cleaning up
2014-05-07        13:06:01:251     916      1594     Report
CWERReporter::Init succeeded
2014-05-07        13:06:01:251     916      1594     Agent
*********** Agent: Initializing Windows Update Agent ***********
2014-05-07        13:06:01:253     916      1594     Agent
*********** Agent: Initializing global settings cache ***********
2014-05-07        13:06:01:253     916      1594     Agent
* WSUS server: http://172.16.74.28
2014-05-07        13:06:01:253     916      1594     Agent
* WSUS status server: http://172.16.74.28
2014-05-07        13:06:01:253     916      1594     Agent
* Target group: (Unassigned Computers)
2014-05-07        13:06:01:253     916      1594     Agent
* Windows Update access disabled: No
2014-05-07        13:06:01:253     916      1410     Report
*********** Report: Initializing static reporting data ***********
2014-05-07        13:06:01:253     916      1410     Report
* OS Version = 6.1.7601.1.0.196626
2014-05-07        13:06:01:253     916      1594     DnldMgr
Download manager restoring 0 downloads
2014-05-07        13:06:01:253     916      1410     Report
* OS Product Type = 0x0000000A
2014-05-07        13:06:01:260     916      1594     AU
########### AU: Initializing Automatic Updates ###########
2014-05-07        13:06:01:261     916      1594     AU
# WSUS server: http://172.16.74.28
2014-05-07        13:06:01:261     916      1594     AU
# Detection frequency: 1
2014-05-07        13:06:01:261     916      1594     AU
# Approval type: Pre-install notify (Policy)
2014-05-07        13:06:01:261     916      1594     AU
# Auto-install minor updates: Yes (Policy)
2014-05-07        13:06:01:261     916      1594     AU
# Will interact with non-admins (Non-admins are elevated (Policy))
2014-05-07        13:06:01:384     916      1410     Report
* Computer Brand = VMware, Inc.
2014-05-07        13:06:01:384     916      1410     Report
* Computer Model = VMware Virtual Platform
2014-05-07        13:06:01:390     916      1410     Report
* Bios Revision = 6.00
2014-05-07        13:06:01:390     916      1410     Report
* Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-05-07        13:06:01:390     916      1410     Report
* Bios Release Date = 2012-07-09T00:00:00
2014-05-07        13:06:01:390     916      1410     Report
* Locale ID = 1033
2014-05-07        13:06:01:392     916      1594     AU
Successfully wrote event for AU health state:0
2014-05-07        13:06:01:392     916      1594     AU
Initializing featured updates
2014-05-07        13:06:01:392     916      1594     AU
Found 0 cached featured updates
2014-05-07        13:06:01:392     916      1594     AU
Successfully wrote event for AU health state:0
2014-05-07        13:06:01:395     916      1714     Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin for reading with hr = 80070002.
2014-05-07        13:06:01:396     916      1714     Report
WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{EEE2278A-AE78-4886-96CF-5C5946BA8699}.bin for reading with hr = 80070002.
2014-05-07        13:06:01:396     916      1594     AU
Successfully wrote event for AU health state:0
2014-05-07        13:06:01:396     916      1594     AU
AU finished delayed initialization
2014-05-07        13:06:01:397     916      1594     AU
Triggering AU detection through DetectNow API
2014-05-07        13:06:01:397     916      1594     AU
Triggering Online detection (non-interactive)
2014-05-07        13:06:01:397     916      1410     AU
2014-05-07        13:06:01:397     916      1410     AU
## START ## AU: Search for updates
2014-05-07        13:06:01:397     916      1410     AU
2014-05-07        13:06:01:399     916      1410     AU
<<## SUBMITTED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07        13:06:01:399     916      1714     Agent
2014-05-07        13:06:01:399     916      1714     Agent
** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07        13:06:01:399     916      1714     Agent
2014-05-07        13:06:01:399     916      1714     Agent
* Online = Yes; Ignore download priority = No
2014-05-07        13:06:01:399     916      1714     Agent
* Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2014-05-07        13:06:01:399     916      1714     Agent
* ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07        13:06:01:399     916      1714     Agent
* Search Scope = {Machine}
2014-05-07        13:06:01:399     916      1714     Setup
Checking for agent SelfUpdate
2014-05-07        13:06:01:400     916      1714     Setup
Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07        13:07:03:952     916      1714     Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07        13:07:03:952     916      1714     Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07        13:07:22:828     916      1714     Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07        13:07:22:828     916      1714     Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07        13:09:02:845     916      1714     Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07        13:09:02:845     916      1714     Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07        13:10:02:451     916      1714     Misc
WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x801901f8
2014-05-07        13:10:02:451     916      1714     Misc
WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x801901f8
2014-05-07        13:10:02:451     916      1714     Misc
WARNING: DownloadFileInternal failed for http://172.16.74.28/selfupdate/wuident.cab: error 0x801901f8
2014-05-07        13:10:02:452     916      1714     Setup
WARNING: SelfUpdate check failed to download package information, error = 0x80244023
2014-05-07        13:10:02:452     916      1714     Setup
FATAL: SelfUpdate check failed, err = 0x80244023
2014-05-07        13:10:02:452     916      1714     Agent
* WARNING: Skipping scan, self-update check returned 0x80244023
2014-05-07        13:10:02:452     916      1714     Agent
* WARNING: Exit code = 0x80244023
2014-05-07        13:10:02:452     916      1714     Agent
2014-05-07        13:10:02:452     916      1714     Agent
** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07        13:10:02:452     916      1714     Agent
2014-05-07        13:10:02:452     916      1714     Agent
WARNING: WU client failed Searching for update with error 0x80244023
2014-05-07        13:10:02:453     916      ae8       AU
>>## RESUMED ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07        13:10:02:453     916      ae8       AU
# WARNING: Search callback failed, result = 0x80244023
2014-05-07        13:10:02:453     916      ae8       AU
# WARNING: Failed to find updates with error code 80244023
2014-05-07        13:10:02:453     916      ae8       AU
2014-05-07        13:10:02:454     916      ae8       AU
## END ## AU: Search for updates [CallId = {177B400D-42A5-46EB-8588-A6F107FF3C77}]
2014-05-07        13:10:02:454     916      ae8       AU
2014-05-07        13:10:02:457     916      ae8       AU
Successfully wrote event for AU health state:0
2014-05-07        13:10:02:457     916      ae8       AU
AU setting next detection timeout to 2014-05-07 06:08:08
2014-05-07        13:10:02:457     916      ae8       AU
Successfully wrote event for AU health state:0
2014-05-07        13:10:02:458     916      ae8       AU
Successfully wrote event for AU health state:0
2014-05-07        13:10:02:463     916      1714     Report
CWERReporter finishing event handling. (00000000)
2014-05-07        13:10:07:452     916      1714     Report
REPORT EVENT: {E1B169E2-C0FC-4D33-A70B-41F76CB362B9}            2014-05-07 13:10:02:452+0800 1          148       101
{D67661EB-2423-451D-BF5D-13199E37DF28}      1            80244023          SelfUpdate
Failure   Software Synchronization            Windows Update Client failed to detect with error 0x80244023.
2014-05-07        13:10:07:462     916      1714     Report
CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-05-07        13:10:07:463     916      1714     Report
WER Report sent: 7.6.7600.256 0x80244023 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-05-07        13:10:07:463     916      1714     Report
CWERReporter finishing event handling. (00000000)
I verified through Nslookup and found WSUS server IP and name does not resolved. However, the download manager window is opening up while accessing
- http://172.16.74.28/selfupdate/wuident.cab from server browser.
Please help.

2014-05-07        13:06:01:395     916      1714     Report   WARNING: Failed to open event cache file at C:\Windows\SoftwareDistribution\EventCache\{1EDE8AC5-7759-45EC-9747-C62989CBAEF4}.bin
for reading with hr = 80070002.
This type of error is quite often symptomatic of a corrupted WUA datastore.
2014-05-07        13:07:03:952     916      1714     Misc      WARNING: WinHttp: SendRequestToServerForFileInformation failed with
0x801901f8
The 0x801901F8 is an HTTP 504 -- "request timed out waiting on a gateway".
2014-05-07        13:06:01:253     916      1594     Agent    * Target group: (Unassigned Computers)
2014-05-07        13:06:01:261     916      1594     AU        # Detection frequency: 1
When using Server-Side Targeting, this value should be at least 2 hours. Based on the above three observations, I recommend the following response:
Verify that the routing table is correct and that requests for 172.16/16 are actually leaving on the correct NIC.
Change the Detection Frequency to at least 2 hours (until you fix the communication issue it might as well be 22 hours!).
Run wuauclt /resetauthorization /detectnow.
If the 0x80070002 error persists, do the following:
Stop the Windows Update service.
Rename %windir%\SoftwareDistribution to SoftwareDistribution.OLD.
Start the Windows Update service.
Run wuauclt /resetauthorization /detectnow and observe the results. If the issue is resolved, copy the ReportingEvents.log from SoftwareDistribution.OLD back to the new SoftwareDistribution.
If the issue is not resolved, post that detection event for further analysis.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

ABAP Client Proxy error code: 401, error text: Unauthorized

Hi,
I have Client proxy in ECC for oubound interface in PI 7.0, when i look into SXMB_MONI of ECC i can see my message with Error "HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)".
As per few thread i already assign SAP_XI_APPL_SERV_USER role to PIAPPLUSER in ECC, still i am getting same eror.
I do not understand how this Proxy communication work, which ECC user will be use in communication and how this communcation link to RFC destination "SAP_PROXY_ESR" type G. Even i can not see type H in ECC so i created RFC destination of type G.
With Regards
Sunil

We were able to get it working by making a change in the Integration Engine Configuration (in sxmb_adm).
Changed "Corresponding Integ. Server" from "http://<server>:<port>/sap/xi/engine?type=entry"
to "dest://RFCdestinationName"

ISE 1.1.1 - Error Code 12521 EAP-TLS failed SSL/TLS handshake after a client alert

Hello,
Has anyone come across this error code before? I have looked in the 1.1.1 troubleshooting section and there is nothing there. When I click on the link for the description off the error in ISE I get the following error:
I setup 7925 phones for EAP-TLS using MIC. I have uploaded Cisco's Root CA and Manufactoring CA Certificates and enabled "Trust for client authentication". A Certificate Profile is configured matching Common Name and is added to the Identity Sequence. I got some additional attribute information, where there is a error message:
OpenSSLErrorMessage=SSL alert code=0x233=563 ; source=remote ; type=fatal ; message="decrypt error"
Anyone know what this error means?

Yes,
That could be it see if you can follow this guide on importing the ISE self signed cert: (i used a 7921 guide but it should be similar).
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/7_0/english/administration/guide/7921cfgu.html#wp1376129
Installing the Authentication Server Root Certificate
The Authentication Server Root Certificate must be installed on the Cisco Unified Wireless IP Phone 7921G.
To install the certificate, follow these steps:
Step 1 Export the Authentication Server Root Certificate from the ACS. See Exporting Certificates from the ACS.
Step 2 Go to the phone web page and choose Certificates.
Step 3 Click Import next to the Authentication Server Root certificate.
Step 4 Restart the phone.
Thanks,
Tarik Admani
*Please rate helpful posts*

DirectAccess Windows 8 Client Won't Connect - Last Error Code: 0x2af9

Hi All
Well I've had 2012 DirectAccess up and running now for about 2/3 weeks (using Win8 client only), it's been "ok" (most problems are client based - like Services not restarting upon resuming from sleep).
Yesterday I spent many hours connected to DirectAccess from my Windows 8 Laptop. When it's working, I love it.
Today, it's a completely different story.
Windows 8 won't damn well connect. At first I started getting prompted to enter proxy credentials (I have no idea why, have never been prompted for this before and the internal TMG proxy shouldn't even be in the loop, given my DA server has it's own
public IP address). The DA server has a completely separate public IP to the proxy's public IP address and the DA is setup with 2x NICs.
The error I'm getting is:
Interface IPHTTPSInterface (Group Policy) Parameters
Role                       : client
URL                        :
https://da.fqdn:443/IPHTTPS
Last Error Code            : 0x2af9
Interface Status           : failed to connect to the IPHTTPS server. Waiting to reconnect
Where do I find out what 0x2af9 error code means?

Hi,
The information for your errorcode seems to be related to not beeing able to lookup the host (the information from MSDN is pasted below.)
Can you verify that your client can resolve "da.fqdn" to the correct IPv4 address?
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681391.aspx
WSAHOST_NOT_FOUND
11001 (0x2AF9)
No such host is known.
Jonas Blom | Relevo AB |
http://blog.nrpt.se
Hi Jonas
Thanks for your input. I think you might be right.
I suspected IE wasn't resetting my connection settings (even though I had un-ticked 'use a proxy server' - I don't think it had 'applied').
So, I did a reset of IE10, noticed all of the connection settings were gone and DA connected.
There definitely seems to be a gap in the DirectAccess solution in that it refers to the IE proxy/connection settings rather than just goes out to the Internet like Outlook does. When on the Domain, obviously you'll receive GPOs which in most organisations
that use things like Proxies (e.g. TMG) these GPOs will apply the proxy settings, but then when you disconnect from the Domain and you want to roam, those proxy settings need to be disabled - at least until DA has connected, then you're free to apply
the proxy as the gateway again.
It's a bit annoying.

How to catch the error code thrown by Oracle client installation?

Hi everyone,
Recently, I'm writing a bat file to install Oracle 11g client for windows, I know the command line should be below, but how to find the error code it return? like the command line I want to run in Windows, the errorlevel will return 0 if the command line is pass, otherwise it will return no-zero:
oui.exe -silent -waitforcompletion -nowait -force -responseFile ...\response\clientruntime.rsp
BTW, I know I can find the error info under the path ...\Oracle\Inventory\logs, but I think it is better if you can tell me another way to catch the error in command line. I just wish that I can determine whether the Oracle provider installation is pass......
Thanks
Lindsay
Edited by: lindsaywang on Oct 6, 2008 1:28 PM

I got it.
Thanks,
TD

Client 7.03 intermittent error codes

Similar Messages

Maybe you are looking for