Client 800 user

Hello Guru:
I just finished install SAP ECC 6.0 SR1.
I can log on client 000, 001.
while going on SCC4 , I have seen system has client 800 too.
I try to log on client 800 with SAP*, DDIC with the same password I used on client 000,001 but not work.
Pls advise how to find out user and password for client 800.
Thanks in advance.

Hi,
I just finished install SAP ECC 6.0 SR1.
I can log on client 000, 001.
while going on SCC4 , I have seen system has client 800 too.
I try to log on client 800 with SAP*, DDIC with the same password I used on client 000,001 but not work.
I guess you have done ides installation. You try making a login to client 800 with the user ddic and master password used during the installation.
If that does not work then follow the steps mentioned in the above reply.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Unable to log in to SAP ES workplace HU2 system; Client 800

Hi,
I'm unable to access the below SAP IDES system using the link https://esworkplace.sap.com
System - HU2
Client * - 800
User * - P610131
I get this message.
User account not in validity date.
To log on please register on SCN: http://www.sdn.sap.com/irj/sdn/soareg
Assistance regarding SOA can be received in the SCN forum:
Service-Oriented Architecture (SOA) and SAP
You can report problems on single services by creating a Customer Messages on the respective application component.
For assistance with ES Workplace systems use CA-SOA-SWP.
Request to provide the necessary access. If this is not the right forum to have this posted, please let me know the right forum to raise this issue.
Thanks
G Raj

Hi Raj,
It sounds like your access is expired. Have you tried re-registering?
Best Regards, Trevor

Client 800 in IDES ECC5.0

Hi Guys
Installaed the IDES ECC5.0. I am able to login to client 000. When I Try to login to Client 800 , system displays user or password incorrect. Can any one please guide me withe steps I need to follow so that I can create a new user and login to client 800 using that new user.
cheers

Login using the following info.
Client : 800
User : IDADMIN
Password : ides
This is help you to login to 800 client and then create users usinf su01 tcode.
Thanks
Nilesh

User id for IDES client 800 is no longer possible

Hi,
I am trying to logon to the client 800 by using the user id IDADMIN by the default sap password. I didn't work, looks like i tried too many times. I am getting the message.
Password logon no longer possible - too many failed attempts.
Any one knows how to unlock this? I tried sap* and ddic, but couldn't logon to client 800. Thanks,
Regards,
Sundar.

Hi Rakesh,
You have mention that we can delete the user from command prompt, pls can you tell me
delete from <HOSTNAME>.<SID>.<b><object_owner></b>.USR02 where BNAME='SAP*' and MANDT='000';
what is mean by above <object_owner>, pls can you tell me what do you mean by that.
waiting for positive reply.
Regards
Anil B Bhandary

Creating Client 800 For ECC 6.0

Hi,
I have installed ECC 6.0 IDES in my PC,i able use 001 client with DDIC user name but iam unable to open 800 client.
Can you please tell me how to create client 800 in ECC.
Thanks in Advance,
Regards,
Balu.

Hi
As you said client 800 is already created in defult
Tcode SCC4 check whether you have 800 client entry there,if you have then try to login with to 800 with sap/pass if it doesn't work then you need to delete sap and so that it will be recreated and you can login with sap*/pass
Login to the SQL prompt and execute the following command.
sqlplus"/as sysdba"
sql>delete from sapsr3.usr02 where mandt='800' and BNAME="SAP*";
where,
SAPSR3 is the schema.
mandt is the client
Bname is the user name
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass,you can find this parameter at /usr/sap/SID/SYS/profiles in Default profile or Instance profile
als chek the below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
http://help.sap.com/saphelp_45b/helpdata/en/52/671792439b11d1896f0000e8322d00/content.htm
Regards
Uday

SLDDSUSER not exist in client 800 and in java VA,but exist in client 001.

Dear friends,
                      I am trying to confiure ESS in my ECC6 system. Previously due to lock issue in J2EE_ADMIN user, I start use SAP* user and cofigure. That time i can able to see SLDDSUSER in my sap client 800 and in java visual admin as well and I have created all relevant JCO connections for ESS.All went fine.
                              But since Sap* lock all other users , i tried to fix that J2EE_ADMIN user.Fortunately I unlock J2EE_ADMIN user and change password as well. With J2EE_ADMIN i can abpe to connect portal as well. But in webdynpro content adminstration screen ,now I can see that check jco connection test only enabled and other buttons maintain Jco detinations are disabled and all my previously created Jco connections gone.
                     After go through SDN documents, i try to use SLDDSUSER for SLD setup. But suprisingly I could not see SLDDSUSER in client 800 as well as in visual admin .But previously I saw in both area. Now only in client 001 SLDDSUSER exist. But i am using client 800 only.Please advice how to proceed further.
Regards,
HockTeck.

check here
System Landscape Directory (SLD)
ttp://wiki.sdn.sap.com/wiki/display/SL/Home
Software Logistics

Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
if ({@param} = 1 then
GroupName ({@GroupBy})
else
{NetPNL.GrossAfterAdj}
but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
MN 100
MN 200
MN 50
CA 300
CA 500
when the data shows in the report, its grouped by state, so it comes out like
MN 350
CA 800
I want the users to decide whether they want it sorted by state (ascending)
CA 800
MN 350
or Total quantity (asc)
MN 350
CA 800

Password for client 800

Dear All,
After I install 4.7 IDES, I have SAP* and DDIC in client 000, but I can not logon to client 800, the user and password is not correct.
regards
Gang

Hi Gang,
Normally for a undistributed system you would find 3 profiles under the tcode rz10.
Default, Instance (Eg: SID_DVEMGS00_HOSTNAME), Start. You can add the parameter login/no_automatic_user_sapstar with value 1 in the Instance or the Default profile. and restart the SAP engine.
If you are unable to see anything under the Profiles in RZ10 click Utilities>Import Profiles>Of Active servers..in RZ10 and save the entries.
Let us know if it helped you...and reward points to all those whose answers helped you..
Cheers,
Prashant.

Client And User Creation in IDES

Hi ,
I created new client 100 in Client 800 and the user DDIC With the Default PWD.
After the creation of client 100 in SCC4, I Hit the TC RZ10.
Here i selected Profile As "Instance Profile".
Here Where i Should Change parameter login/no_automatic_user_sapstar == 0.
Iam unable to see this.
Please help me in this.
Regards
Khanna

Hi Khanna,
Check these..
http://help.sap.com/saphelp_nw04/helpdata/en/3e/cdacecedc411d3a6510000e835363f/frameset.htm
/thread/327681 [original link is broken]
cheers,
prashanth

What is the default password of Client 800, 811 on IDES 4.7

Just want to know if anybody here still remember the default password of Client 800 or 811 in SAP IDES 4.7?
Thank you very much.

Hi,
Have you tried to Log-in using the default SAP User DDIC with default password 19920706 in 800 and 811Clients ?
Also you can try to log-in using SAP* user with 06071992 password.
After log-in , please create other SAP User with SAP_ALL profile.
Regards,
Bhavik G. Shroff

How to Reset Password of Client 800 in SQL server2005 of IDES Ecc6.0

Dear All,
how to Reset Password in SQL server of Client 800 IDES Ecc6.0.
& what will be its password.
with best regards.
Ishtiaq

Hi
Simple logic we have sap* and ddic as default users if you are unable to login to client 800 with any of the user then you need to delete the user sap* from database level so that it will be recreated again and you can login as sap* and password as pass here is the procedure
login to ora<sid>
execute the sql statement
delete from usr02.sapr3 where bname = 'SAP*' and mandt = '800';
commit;
sapr3 is your schema id
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass
If the parameter doesn't exist then maintain in instance profile
/usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
Unfortunately you'll need a system restart to enable and disable the parameter
You can also refer to below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
Let me know if you need more help
Regards
Uday

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

IDX1: Port SAPIDS, client 800, RFC destination contain error

hi
i changed the client on xi for idoc to file scenario.
in sm 58 iam getting following error
Transaction IDX1: Port SAPIDS, client 800, RFC destination contain error
regards viju........

VIJENDER SRIRAMOJU,
If you change the client on xi for that scenario, make the corresponding changes
in Idx1.
Also delete the entries from Idx2. (entries in idx2 are read automatically during runtime)
There is a howto on idoc scenario in sdn. Just go through that.
reg,

SM58 status text " No service for system SAPERP, client 800 in integr "

In Idoc to file scenario:
i have fallowed this blog to configure ALE settings
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I have generated one idoc successfuly from sap r/3 system.
but i didn't find any idoc in xi server.
control records are
receiver:A000000036,(RFC DESTINATION->LS_XI_100( Remote login sucessful for xi system))
      LS_XI_100
      LS
Sender: SAPERP
     LS_SAP_800
     LS
ID: Adapter specific identifiers are( LS->LS_SAP800, R/3->ERP,CLIENT,800)
so i have gone to tcode sm58 in sap r/3
   where i found the status text "No service for system SAPERP, client 800 in integr)
Please help me from this problem.
Regards,
Deviprasad.

Hi Deviparasad,
please create a techincal system and busniess system of type ABAP in XI SLD if you have already created the techincal system and busniess system then check whether client 800 is used or not if include client 800.
please reward points
Regards
Sreeram.G.Reddy

No service for system SAPABI, client 800 in Integration Directory

Hi,
We are getting the error in BI "No service for system SAPABI, client 800 in Integration Directory", when we extract the data from R/3 (ECC6) into BI System. It was working fine earlier, till XI-BI integration was done.
But, After XI integration is done in BI system we are getting this error, when ever we try to load the data from source system. The XI integration is removed now, but the error still continues.
The source system is ok and could able to replicate the data from R/3 into BI. Is there any XI related customizing need to be removed from BI?, so that it directly goes to the source system for data load, instead of hitting the Integration Directory, which is part of XI.
It would be great, if someone can give a solution for this.
Thanks in Advance,
SAP Admin.

Hi,
First check at BI side transaction: SICF there services are properly configured or not, the services should be in Active state.
Second you must check transaction: SXMB_MONI here you can check what ever the Reports or Webservices are coming from out bound to inbound.
1. first check out bound in that server you type SXMB_MONI there u can see Flag that should be in black. If it is Flag is in Red then the Report should be stoped there it self.
2. Once it came to receiver side then u must check at inbound server by typing transaction: SXMB_MONI by checking that flag you will know what might be the problem.
Once check ur RFC connection also because you can get problem from RFC connections also.
Sateesh

Client 800 user

Similar Messages

Maybe you are looking for