Client ABAP Proxy : how to know which program is calling that service interface proxy
Hi All,
I have prepared some client proxy in ECC to communicate with PI.
But, if I am not wrong, unlike server proxy which is written directly in the class Provider class in SPROXT transaction, in client proxy we write abap code to trigger proxy in SE38 .
My question is : If I am in SPROXY and looking at any outbound SI, of which proxy is already generated, then how can in SE38 can I find which program is triggering that interface or proxy?
Hi,
check below thread for calling client proxy
ECC outbound abap proxy (client) - Get ECC messageID from Protocol
Regards,
Similar Messages
-
How to know print program for SAP Script
Hi friends,
how to know print program for SAP Script form name ?Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
where id = in_tab-value.
if sy-subrc = 0.
read table out_tab index 1.
move scustom-name to out_tab-value.
modify out_tab index sy-tabix.
else.
read table out_tab index 1.
move 'No name' to out_tab-value.
modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
READ TABLE out_par WITH KEY 'NAME1'.
out_par-value = l_name1.
MODIFY out_par INDEX sy-tabix.
endform. -
How to change which programs run at start up
Hello,
I am just trying to speed up and clean up my machine. I would like to know how to control which programs run at start up. Also any other suggestions on how to keep everything running smoothly and effifiently. General maintenance type stuff.
Thanks, JasonHow to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until recently, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most users don't.
5. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” “rebuilding the directory,” “running periodic scripts,” “deleting log files,” “scanning for viruses,” or “repairing permissions.” Such measures are for solving problems as they arise, not for maintenance.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it. -
How to know which type of jdbc driver used in my application
How to know which type of jdbc driver used in my application.
My approach will be....
Type1: you have to have ODBC s/w install on your machine...even the connection string starts with jdbc:odbc....so it can be identifed easily
Type2: you have to install client s/w in your machine...if you are using oracle oci driver ...you need to install oracle client s/w
Type3: you use servername / port to connnect to middleware
Type4: you do not need any client s/w
So, If your application works without any client s/w on your machine....you might be using Type4/Type3 driver.....otherwise Type2
Someone pls add more .... -
How to know which process is consuming high percentage of cpu?
Hi,
How to check which process is consuming high percentage of cpu ?
how to know the cpu time is atleast 80% of the elapsed time and how to know which code the process is running?
I know we can check high performance cpu can be find by TOP command
but i dont know on solaris?
please help me on this?One way is to use my Snapper script for getting the breakdown ( see http://blog.tanelpoder.com/2007/12/06/oracle-session-snapper-v106-released/ for more info ).
An example snapshot (taken over 60 second period) is below:
SQL> @snapper out,gather=tw 60 1 "select sid from v$session where type = 'USER'"
-- Session Snapper v1.07 by Tanel Poder ( http://www.tanelpoder.com )
HEAD, SID, SNAPSHOT START , SECONDS, TYPE, STATISTIC , DELTA, DELTA/SEC, HDELTA, HDELTA/SEC
DATA, 2, 20080710 11:39:18, 61, TIME, repeated bind elapsed time , 1314, 22, 1.31ms, 21.54us
DATA, 2, 20080710 11:39:18, 61, TIME, parse time elapsed , 21518, 353, 21.52ms, 352.75us
DATA, 2, 20080710 11:39:18, 61, TIME, PL/SQL execution elapsed time , 809888, 13277, 809.89ms, 13.28ms
DATA, 2, 20080710 11:39:18, 61, TIME, DB CPU , 11204956, 183688, 11.2s, 183.69ms
DATA, 2, 20080710 11:39:18, 61, TIME, sql execute elapsed time , 12441308, 203956, 12.44s, 203.96ms
DATA, 2, 20080710 11:39:18, 61, TIME, DB time , 13825800, 226652, 13.83s, 226.65ms
DATA, 2, 20080710 11:39:18, 61, WAIT, read by other session , 4432, 73, 4.43ms, 72.66us
DATA, 2, 20080710 11:39:18, 61, WAIT, log file sync , 1215135, 19920, 1.22s, 19.92ms
DATA, 2, 20080710 11:39:18, 61, WAIT, db file sequential read , 1458168, 23904, 1.46s, 23.9ms
DATA, 2, 20080710 11:39:18, 61, WAIT, enq: TX - row lock contention , 11600, 190, 11.6ms, 190.16us
DATA, 2, 20080710 11:39:18, 61, WAIT, row cache lock , 420, 7, 420us, 6.89us
DATA, 2, 20080710 11:39:18, 61, WAIT, SQL*Net message to client , 1842, 30, 1.84ms, 30.2us
DATA, 2, 20080710 11:39:18, 61, WAIT, SQL*Net message from client , 9490531, 155582, 9.49s, 155.58ms
DATA, 2, 20080710 11:39:18, 61, WAIT, PL/SQL lock timer , 35759582, 586223, 35.76s, 586.22ms
DATA, 2, 20080710 11:39:18, 61, WAIT, events in waitclass Other , 302, 5, 302us, 4.95us
DATA, 20, 20080710 11:39:18, 61, TIME, repeated bind elapsed time , 1332, 22, 1.33ms, 21.84us
DATA, 20, 20080710 11:39:18, 61, TIME, parse time elapsed , 21439, 351, 21.44ms, 351.46us
DATA, 20, 20080710 11:39:18, 61, TIME, PL/SQL execution elapsed time , 799773, 13111, 799.77ms, 13.11ms
DATA, 20, 20080710 11:39:18, 61, TIME, DB CPU , 11303744, 185307, 11.3s, 185.31ms
DATA, 20, 20080710 11:39:18, 61, TIME, sql execute elapsed time , 12404247, 203348, 12.4s, 203.35ms
DATA, 20, 20080710 11:39:18, 61, TIME, DB time , 13792389, 226105, 13.79s, 226.1ms
DATA, 20, 20080710 11:39:18, 61, TIME, sequence load elapsed time , 752, 12, 752us, 12.33us
DATA, 20, 20080710 11:39:18, 61, WAIT, log file sync , 1228759, 20144, 1.23s, 20.14ms
DATA, 20, 20080710 11:39:18, 61, WAIT, db file sequential read , 1339772, 21963, 1.34s, 21.96ms
DATA, 20, 20080710 11:39:18, 61, WAIT, row cache lock , 395, 6, 395us, 6.48us
DATA, 20, 20080710 11:39:18, 61, WAIT, SQL*Net message to client , 1901, 31, 1.9ms, 31.16us
DATA, 20, 20080710 11:39:18, 61, WAIT, SQL*Net message from client , 9496607, 155682, 9.5s, 155.68ms
DATA, 20, 20080710 11:39:18, 61, WAIT, PL/SQL lock timer , 35786481, 586664, 35.79s, 586.66ms
DATA, 20, 20080710 11:39:18, 61, WAIT, events in waitclass Other , 96, 2, 96us, 1.57us
Tanel Poder
http://blog.tanelpoder.com -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to know which interfaces are going to which switch?
How to know which interfaces are going to which switch ?
I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
Regards,
ChanduI don't want to the end devices location.
For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not help because it will hold the information of ports that are up.
Regards,
Chandu -
How do I know games and programs that become free?
I want to know the programs and games that become free first firstYou are allowed to have two activated installations so there should not be a problem having working installations on the two machines. If by chance you have somehow tied up two activations for the one machine you can have Adobe support help resolve that thru chat.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
How to know which table in the database a form is accessing
Actually Im new to oracle applications,
Im getting an error when i open a form from system administrator responsibility saying that table doesnot exist.
My basic doubt is, how to know which table in the database a form is accessing.
Any response is higly appreciated.
Thanks,
Praveen
Edited by: user10239520 on Sep 10, 2008 7:07 AMTake a look at the following thread:
Is there a query log in EBS?
Re: Is there a query log in EBS? -
How I know which manageability tools(Oracle Change Management Pack,Oracle C
Dear all,
How I know which manageability tools(Oracle Change Management Pack,Oracle Configuration Management Pack,Oracle Diagnostic Pack,Oracle Tuning Pack, etc.) are installed on my oracle databases? Is there v$view to look at? Thank you in advance for your help.The usual method is described in http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF
-
How to know which object is in which transport requeset
hi frnds
how to know which object is in which transport requesthi Preethi
try with transaction se01 then clic on the tools icon under the menu you will get a list of function.
then select search for object in transport request (maybe the text is a bit different) then enter information like for example R3TR OSOA and the name of a datasource. if you don't know the meaning of R3TR use the match code and use it also for objects you want to find infosource infoobject etc... don't forget to mark the flag select if your transport request is released or not and then execute you will get the list of all transport requests containing your search object.
hope this could help you
best regards
Boujema -
How to Find Which Programs running in my Domain Computers
How to Find Which Programs running in my Domain Computers.
In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
List All Installed Software
Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
another script that will uninstall that software remotely.
Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
How to know which type of apple device am using
how to know which type of apple device am using
Check iPad model with the Serial Number
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Settings>General>About>Serial Number -
How come property attribute of jsp:getProperty knows which method to call
Hello friends,
I could not understand How come property attribute of <jsp:getProperty knows which method to call
<jsp:useBean id="test" class="BeanTest.testing" scope="page" />
<jsp:getProperty name="test" property="name" />
there is no method "name" in testing.class file
if u see the existing examples "date" given in TOMCAT , it is using many <jsp:getProperty tag, but the property name is not equal to the method method name in the Bean file
thanks,First do you know what a
bean property sheet is?
If not say so.
Second, to your question
The Java Runtime Environment (JRE) uses introspection to identify the appropriate get() or set() methods of that bean. What is introspection?
Introspection is a process that allows the class to expose its accessable variables and methods and allows other classes to see what they can do with that class when requested. Eg:
public class MyBean{
private String someValue = null;
public MyBean(){
someValue = "Some String Value";
//Introspection will reveal this method
public String getSomeValue(){
return someValue;
} and
<jsp:getProperty name="...." property="someValue" />
will call the getSomeValue() method -
How to know which version Netweaver is been installed in the system
How to know which version Netweaver is been installed in the system.
I wanted to know whether i have installed NW04 SP Stack 13 or higher.
Suggestions / Hints are wellcome
-Narenhi,
Pretty simple yar
In portal goto>sysconfig>support-->u can find the Version in the content area at the bottom.
There u find the SAP WAS version and EP version.
in NWDS
goto help---->About sap NWDS -->then popup will disply you find the version.
Vesion: 2.0.14 like
Thanks,
Lohi.
Message was edited by:
Lohitha M
Maybe you are looking for
-
Art brush bug(s).
I really don't know why it happens. 'Art brush original' in second picture is art brush material for art brush in both pictures. In the first picture, the circle has no fill, and it's showing white fill as if it has. And the second picture, as you se
-
Weird error while starting oracle graphical tools
Hello. I have a fresh Fedora 10 installed and i have just installed Oracle 10g. Everything have worked out fine but i have some strange error(?)-message when im starting tools like dbca and netca. I'll copy it here for you, maybe you know what it mea
-
Folks, I currently own a Canon T2i DSLR, and just purchased a Powershot SX280. I noticed in two of my recent outdoor pictures with the new Powershot SX280, I got low contrast shots in auto mode. Basically, the pictures have a hazy, grey look to th
-
HT1386 syncing iPhone to iTunes
when i plug my device into my laptop it is not recognised on itunes, or as a device on my computer. and ideas on why this might be?
-
When Syndication does not happen
Hello Although I checked everything I could regarding the Port's configuration and Syndicator (Mapping, eligible records), the syndication does not happen. The processing type is Automatic and processing interval hourly. The console does not get upd