Client And Cluster

I understand that having configured my XI 3.0 cluster if I log into it using Designer and the name of a CMS Server in that cluster the registry will be updated with the Cluster details. In fact I can even see the server names in a key in the registry.
However should I now be able to access the cluster from Designer by logging in with the cluster name?
So, if my servers were SERVER1.mycompany.net and SERVER2.mycompany.net and my cluster is @CLUSTER I have a key in HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Enterprise\CMSClusterMembers called @CLUSTER with value SERVER1.mycompany.net:6400; SERVER2.mycompany.net:6400;
Should I then be able to access designer using @CLUSTER as the system?

This should work in 3.0. I don't have a cluster configured right now to test.
Can you open a message with support to verify with an admin engineer in case this is a bug?
Regards,
Tim

Similar Messages

Abap proxies ( Client and Server proxies)

Hi Team
Good day to you. I am now started doing some example scenarios on ABAP proxies(ie Client and Server proxies). After going through the blogs which are avialable, i am writing this question to you for clarification.
As per my understanding, the below are the required predefined settings which i need to do in my landscape to generate abap proxies(ie client and server proxies).
My landscape includes the below systems.
System A : SAP XI 3.0 system and
System B : SAP R/3 on WAS 620
SAP R/3 predefined Steps
1.Create HTTP connection in the business system.
2.Configuration Business system as local Integration Engine.
3. Connection between Business System and System Landscape Directory.
4. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
(Here in the step 4, i found the below needs to be done)
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
     Program ID: LCRSAPRFC
     Gateway Host: <Integration Server host>
     Gateway Service: <Integration Server gateway service>
     Number of process: 3
4. Under Repository specify the following:
5. Choose Set.
Application Server: <Integration Server host>
(i am not able to perform the steps which comes under point 4. so please Guide me how to goto J2EE engine and configure accordingly.
5. Maintain SLD access details in Transaction SLDAPICUST.
As per my understanding, i need to do the above predefined configuration steps in SAP R/3 system (ie bussiness System) for doing Abap Client or Server proxies.
And in the meantime, i would like to know whether i need to do any predefined configuration steps in XI 3.o system also. Please check and suggest me accordingly.
Once i get clarification on predefined configuration steps, i will proceed with the example scenarios on client and server proxies which are already in SDN.
Thanks in advance.
Regards
Raj

Hello Pavan
thanks for your response. you said that for the connection type 'H' we need to provide values for GATEWAY HOST and GATEWAY SERVICE but here i need to create the RFC destination of type 'T'. so please tell me whether i need to give the values for GATEWAY HOST and GATEWAY SERVICE for connection type 'T' also and the second thing is please tell me the difference between Application system and bussiness system accordingly to my landscape which i mentioned in my question.
I am in little confusion because as per the requirement for abap proxies in the blog they mentioned that all these setting should be done in the bussiness system (ie SAP R/3) but you are saying that Application system. so please clarify.
My landscape which i am going to use in Abap proxy generation
System A: XI 3.0
System B: R/3
Here which is bussiness system and which is application system. Pls calrify.
Thanks in advance.
Regards
Raj

Configure the ADMIN and CLUSTER service connections to be SSL

Can you configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp?
I was wondering about the present or future ability to secure other
connection services with SSL. Can you now or are there future plans
to configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp? I suppose I should add the PORTMAPPER to that list.
My primary interest is for an SSLCLUSTER service in the case where
two brokers are connected over a non-trusted network. It may
not be too difficult to secure all the services the same way, but
perhaps that is on the TODO list.
A related question is if there are plans to add SSL with client
authentication as a stronger authentication mechanism than 'simple'
username and password. I believe you could get the username from
the client certificate's DN and continue to use the same LDAP user
repository for access control. I think this is similar to the way
that BEA's Weblogic server does it.
Finally should it be possible to deploy the HTTP tunnel servlet to
a webserver (such as iPlanet Web Server) configured to do SSL with
client authentication as a work-around to get stronger authentication
with the current release of the product? Or am I perhaps missing some
obvious and important detail? :) I guess I would like to know it's been
done already or is at least possible before I try and do it myself.

3 scenarios involving SSL are:
1: JMS client <------- SSL -------> iMQ broker
2: iMQ admin <------- SSL -------> iMQ broker
3: iMQ broker <------- SSL -------> iMQ broker (i.e clusters)
(1) is currently supported in iMQ 2.0
(2) and (3) is not supported in iMQ 2.0. No concrete plans yet to support
it in the near future but we'll definitely consider doing it if we
hear a lot of demand for it.
]A related question is if there are plans to add SSL with client
]authentication as a stronger authentication mechanism than 'simple'
]username and password. I believe you could get the username from
]the client certificate's DN and continue to use the same LDAP user
]repository for access control. I think this is similar to the way
]that BEA's Weblogic server does it.
This is on our todo list, but due to other more pressing issues we
have not been able to address it. We will continue to keep it
on our potential list of new features.
Sorry if I sound pretty wishy-washy in my responses above, but the fact
is that the things you mentioned above had to take a backseat
to other more critical features. That and the usual time/resource
constraints caused them not to be implemented.
]Finally should it be possible to deploy the HTTP tunnel servlet to
]a webserver (such as iPlanet Web Server) configured to do SSL with
]client authentication as a work-around to get stronger authentication
]with the current release of the product? Or am I perhaps missing some
]obvious and important detail? :) I guess I would like to know it's been
]done already or is at least possible before I try and do it myself.
Yes, this should be possible (although I don't believe we've tried it here).
The client authentication here is really only between the JMS client and the
web server (not between the tunnel servlet and the iMQ broker) and should
be similar in setup to any other java application talking to iPlanet Web
Server.

Diff SSO and Cluster controller

Hello Experts,
What is the difference between SSO(single sign on) and Cluster controller in OBIEE Server level.
Regards,

Hi,
SSO and Cluster Controller are two different like SSO is related to Security and Cluster Controller will be used for Managing two BI Servers.
SSO Security
Single sign-on is a session/user authentication process that permits a user to enter one name and password in order to access multiple applications. The process authenticates the user for all the applications they have been given rights to and eliminates further prompts when they switch applications during a particular session.
Cluster Controller
The BI Cluster Server feature supports up to 16 BI Servers in a network domain to act as a single server. BI Servers in the cluster share requests from multiple Oracle BI clients.
The components that comprise the BI Cluster Server feature are:
1) Oracle Business Intelligence Cluster Controller
2) Clustered BI Servers
3) Master BI Server
4) BI Scheduler
5) Cluster Manager
Cluster Manager:
The Cluster Manager is available in the Administration Tool when a repository is opened in online mode. The Cluster Manager enables Oracle BI Server clustered instances.
Regards
Kumar

WAP321 active clients per cluster

Dear Support,
Please give me deatiled information about the "active clients per cluster" parameter of a WAP321 AP.
Datasheet says active clients per cluster = 80, but i find a presentation where this number is 160 (attached). ???
Another question is, What if i have only 5 WAP321 (not the maximum 8pcs) in my cluster?
How much clients can connect to the cluster at the same time? (20 pcs/AP and 50/cluster or 20 pcs/AP and 80/cluster?)
Other qestion: The information exchange between APs on the same cluster happens wired or wirelessly?
(for examlpe automatic channel selection, or when i config a parameter one of the AP, then this is updated on all the other APs)
Best regards,

Hello Sir, Thank you for commenting back. If you would look at the Datasheet again it does confirm what I mentioned here. There are two section: performance mainly deals with the Access Point by itself, Up to 32 connective and 20 recommended. The 80 that you refer to is from the Multi-Access point section from when you have this access point set in a cluster.
Performance
Wireless throughput
Data rate =300 Mbps; actual client throughput will vary.
Recommended user support
Up to 32 connective users, 20 active users
Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Multi-Access Point Management
Single Point Setup
Yes
Maximum access points per cluster
8
Active clients per cluster
80
As to the the RV router family, if you would like to tell me which problems exactly you are referring to I would be happy to try and address them for you.
Eric Moyers

Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4

Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav

Aggregates, VLAN's, Jumbo-Frames and cluster interconnect opinions

Hi All,
I'm reviewing my options for a new cluster configuration and would like the opinions of people with more expertise than myself out there.
What I have in mind as follows:
2 x X4170 servers with 8 x NIC's in each.
On each 4170 I was going to configure 2 aggregates with 3 nics in each aggregate as follows
igb0 device in aggr1
igb1 device in aggr1
igb2 device in aggr1
igb3 stand-alone device for iSCSI network
e1000g0 device in aggr2
e1000g1 device in aggr2
e1000g2 device in aggr3
e1000g3 stand-alone device of iSCSI network
Now, on top of these aggregates, I was planning on creating VLAN interfaces which will allow me to connect to our two "public" network segments and for the cluster heartbeat network.
I was then going to configure the vlan's in an IPMP group for failover. I know there are some questions around that configuration in the sense that IPMP will not detect a nic failure if a NIC goes offline in the aggregate, but I could monitor that in a different manner.
At this point, my questions are:
[1] Are vlan's, on top of aggregates, supported withing Solaris Cluster? I've not seen anything in the documentation to mention that it is, or is not for that matter. I see that vlan's are supported, inluding support for cluster interconnects over vlan's.
Now with the standalone interface I want to enable jumbo frames, but I've noticed that the igb.conf file has a global setting for all nic ports, whereas I can enable it for a single nic port in the e1000g.conf kernel driver. My questions are as follows:
[2] What is the general feeling with mixing mtu sizes on the same lan/vlan? Ive seen some comments that this is not a good idea, and some say that it doesnt cause a problem.
[3] If the underlying nic, igb0-2 (aggr1) for example, has 9k mtu enabled, I can force the mtu size (1500) for "normal" networks on the vlan interfaces pointing to my "public" network and cluster interconnect vlan. Does anyone have experience of this causing any issues?
Thanks in advance for all comments/suggestions.

For 1) the question is really "Do I need to enable Jumbo Frames if I don't want to use them (neither public nore private network)" - the answer is no.
For 2) each cluster needs to have its own seperate set of VLANs.
Greets
Thorsten

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sequencing multiple versions of the VMWare vSphere client (and reducing the size of the final sequence)

Application Name: vSphere client
Application Version: 4.1, 5.0, and 5.5 (all in one package)
Company Name: VMWare
Sequencer Version: 5.0 SP1 or SP2
App-V Client Version Tested On: 5.0, 5.0 SP1, 5.0 SP2
Operating System Sequenced On: Windows 7 (64bit)
Pre-requisites: Orca
Client Operating Systems Successfully Deployed To: Windows 7 (64bit), Windows Server 2008 (64bit)
*Posted by non-Microsoft Employee: Cody Lambert (a Fortune 100 company)
If Posted by Microsoft Employee, the Corresponding KB Article Reference:
N/A
Steps to Prepare and Sequence the Application:
Phase 1: Prepare vSphere install to be used in your sequence (to be performed prior to sequencing)
Clear %TEMP% directory on machine you are using to prepare the install
Create a folder that will be referred to as "vSphereInstDir"
that install files are copied to
Download the vSphere 5.5 client from your vSphere management server
Run the installer for the vSphere Client
Once at the Language Selection portion of the installer,
using windows explorer browse to the %temp% directory and copy the files that were just created when the vSphere installer extracted to a directory (name it vSphereInstDir)
Kill the installer
Find VMware-viclient.exe in the files you just copied
and run it
Once at the "Welcome to the installation
wizard" stage of the installer, using windows explorer browse to the %temp% directory and copy the files that were just created into the vSphereInstDir
Kill the installer
Find the VMware vSphere Client 5.5.msi in the vSphereInstDir,
in the second set of files you copied over
Using Orca, open the VMware vSphere Client 5.5.msi
Drop the following rows from the msi (some of the rows may have additional text at the end of the names) (InstallExecuteSequence/VM_InstallHcmon,
InstallExecuteSequence/VM_InstallHcmon_SetData,
InstallExecuteSequence/VM_InstallUSB,
InstallExecuteSequence/VM_InstallUSB_SetData,
InstallExecuteSequence/VM_InstallUSBArbritrator,
InstallExecuteSequence/VM_InstallUSBArbritratorSetData,
InstallExecuteSequence/VM_StartUSBArbSvc)
Save the VMware vSphere 5.5.msi in place
Copy the vSphereInstDir to a network location that
can be used during sequencing on your Sequencer
Phase 2: Sequence the vSphere Client
Pre-requisites: All of the latest available VC++ redist (x64 and x86) are installed on the Sequencer VM
Copy vSphereInstDir to your temporary install directory on your Sequencer (mine is C:\temp)
Start up the Sequencer
Click Create a New Virtual Application Package
Click Next with Create Package (default) selected
Click Next on the Prepare Computer screen, taking
note of any findings
Click Next with Standard Application (default) selected
Choose Perform a custom installation, then click Next
Input the Virtual Application name (vSphere Client
5.5 for example)
Enter the Primary Virtual Application Directory (C:\vSphere55
for example) and click Next
Using Windows Explorer find the Visual J# install (vjredist64.exe) in the vSphereInstDir you copied over. Install using defaults
Using Windows Explorer, find and install the vSphere client using the VMware vSphere Client 5.0.msi located in the vSphereInstDir you copied over.
Change the installation directory to use the Primary Virtual Application Directory you configured above (C:\vSphere55 for example). Install using
defaults
While the sequencer is still monitoring changes connect to the 4.1 environment to get the files needed. To do this, launch the vSphere client and connect
to your 4.1 environment. When prompted, choose RUN to install the files needed for the 4.1 environment.
While the sequencer is still monitoring changes connect to the 5.0 environment to get the files needed. To do this, launch the vSphere client and
connect to your 5.0 environment. When prompted, choose RUN to install the files needed for the 5.0 environment.
With the sequencer still monitoring changes, after the additional environments have been installed, delete all of the language folders from the install locations
that are not required. You will find that there are language folders in each of the different modules that are installed. Make sure look in every folder. This will free up approximately 300mb from the package.
When done, check the box to finish the sequence and continue cleaning up the sequenced application.
Known Issues/Limitations:
Functions that require the USB Arbritration Service will not work
Approximate Sequencing Time:
20 minutes
Descriptive Tags:
App-V, 5.0, VMWare, vSphere, Recipe, Guidance
Credit Due: Thanks to Rorymon and Aaron Parker for accurate information that allowed for me to put together this recipe.

Can you double check the that the following were removed from the MSI:
InstallExecuteSequence/VM_InstallHcmon
InstallExecuteSequence/VM_InstallHcmon_SetData
InstallExecuteSequence/VM_InstallUSB
InstallExecuteSequence/VM_InstallUSB_SetData
InstallExecuteSequence/VM_InstallUSBArbritrator
InstallExecuteSequence/VM_InstallUSBArbritratorSetData
InstallExecuteSequence/VM_StartUSBArbSvc

I cannot route to remote subnets from cisco vpn client and pptp client

Hi guys,
I've a big problem, I configured a 877 cisco router as a cisco vpn server (the customer use it to connect to his network from pc) and a pptp vpn server (he use it to connet to the network from a smartphone).
In this router I created 2 vlan, one for wired network (192.168.10.0/24) and the second one (10.0.0.0/24) for wireless clients and I use fastethernet 3 port to connect these to the router.
this is the issue, when the customer try to connect to a wireless network from both of vpn clients he cannot do this, but if he try to connect to a wired network client all working fine.
following the addresses taken from the router.
- encrypted vpn client -
ip address. 192.168.10.20
netmask 255.255.255.0
Default Gateway. none (blank)
- pptp vpn client -
ip address. 192.168.10.21
netmask. 255.255.255.255
Default Gateway. 192.168.10.21
Is possible that I cannot reach the remote subnet because the clients doesn't receive a gateway (in the first case) or receive the wrong subnet/gateway (in the second one)..?
There is anyone can help me..?
Thank you very much.
Many Kisses and Kindly Regards..
Ilaria

The default gateway on your PC is not the problem, it will always show as the same IP address (this is no different when you dial up to an ISP, your DG will again be set to your negotiated IP address).
The issue will be routing within the campus network and more importantly on the PIX itself. The campus network needs a route to the VPN pool of addresses that eventually points back to the PIX.
The issue here is that the PIX will have a default gateway pointing back out towards your laptop. When you establish a VPN and try and go to an Internet address, the PIX is going to route this packet according to its routing table and send it back out the interface it came in on. The PIX won't do this, and the packet will be dropped. Unless you can set the PIX's routing table to forward Internet packets to the campus network, there's no way around this. Of course if you do that then you'll break connectivity thru the PIX for all the internal users.
The only way to do this is to configure split tunnelling on the PIX, so that packets destined for the Internet are sent directly from your laptop in the clear just like normal, and any packet destined for the campus network is encrypted and sent over the tunnel.
Here's the format of the command:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#1048524

How to configure full tunnel with VPN client and router?

I know the concept of split tunnel....Is it possibe to configure vpn client and router full tunnel or instead of router ASA? I know filter options in concentrators is teher options in ISR routers or ASA?

I think it is possible. Following links may help you
http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a0080819289.shtml

Mavericks VPN dropouts with native VPN client and Cisco IPSec

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

Cisco ASA 5505, Cisco VPN Client and Novell Netware

Hi,
Our ISP have installed Cisco ASA 5505 firewall. We are trying to connect to our Novell 5.1 server using VPN client.
I installed VPN client on a laptop that is using wireless connection. I connect using wireless signal from near by hotel and I am able to connect to my firewall usinging vpn client and also able to login in using Novell client for XP.
When I use same vpn client and Novell client at home that is not using wireless connection, but DSL connection amd not able to login or find the tree.
The only difference in two machine is laptop using wireless connection and my home machine is using wired connection using DSL.

If your remote end of the services in question support IPsec IKEv1 as the VPN type then, yes - the 5505 can be a client for that service. At that point it looks like a regular LAN-LAN VPN which is documented in many Cisco and 3rd party how-to documents.

Boot camp with Cisco VPN client and smart card

Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I correct? Im going to an Apple store tomorrow hopefully they can help too.
Thanks

mrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman

Client And Cluster

Similar Messages

Maybe you are looking for