Client And User Creation in IDES

Hi ,
I created new client 100 in Client 800 and the user DDIC With the Default PWD.
After the creation of client 100 in SCC4, I Hit the TC RZ10.
Here i selected Profile As "Instance Profile".
Here Where i Should Change parameter login/no_automatic_user_sapstar == 0.
Iam unable to see this.
Please help me in this.
Regards
Khanna

Hi Khanna,
Check these..
http://help.sap.com/saphelp_nw04/helpdata/en/3e/cdacecedc411d3a6510000e835363f/frameset.htm
/thread/327681 [original link is broken]
cheers,
prashanth

Similar Messages

Best client and user to use SPAM or SAINT

Hi Gurus,
Please tell me which is the best client and user to implement SPAM/SAINT . I read many forums but none gave me clear idea. Everybody are giving different opinions. Please guide me properly as im novice in basis.
Thanks

Hello,
Technically you can use DDIC in client 000 to run SAINT. But in order to track who ran the transaction, you can have a user with same authority as DDIC to run SAINT.
It has to be run in client 000. This is because the SAINT Packages are client independent. And the transaction SAINT will cascade the changes to all clients automatically.
Best Regards,
Joseph

Client and user to execute COM_PRODUCT_UPGRADE

Hello:
I am almost finishing the SAP upgrade from 46C to ECC 6.0; Upgrade Assistant is asking for execution of report COM_PRODUCT_UPGRADE using SE38.
¿Which client and user should I use to do this work? ¿Is it possible tio use client 000 and user DDIC? The manual is not clear about this.
Thank you.

Hi,
It does not appear important which client/user you execute the report COM_PRODUCT_UPGRADE:
Note 826092:
Executing conversion programs for product master
Page 6
In the upgrade guides for ramp-up, the following follow-up activity is
missing:
As of SAP netWeaver 2004s, several conversion reports needed for the
product master are bundled into a single report, COM_PRODUCT_UPGRADE.
If the upgrade log LONGPOST.LOG (displayed in phase CHK_POSTUP) requests
you to execute the upgrade report COM_PRODUCT_UPGRADE, after the
upgrade, call transaction SE38 and execute the report. A transport
request is created which you need to transport in all subsequent
systems. After the import of the transport request, you must run report
COM_PRODUCT_UPGRADE in the respective subsequent systems.
Regards,
Aidan

Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
if ({@param} = 1 then
GroupName ({@GroupBy})
else
{NetPNL.GrossAfterAdj}
but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
MN 100
MN 200
MN 50
CA 300
CA 500
when the data shows in the report, its grouped by state, so it comes out like
MN 350
CA 800
I want the users to decide whether they want it sorted by state (ascending)
CA 800
MN 350
or Total quantity (asc)
MN 350
CA 800

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Hi all,
I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
please advice what may be the issue ?

Hi,
does anyone happen to know if that problem is fixed? My currently setup looks like this:
1. Cisco Prime Infrastructure 2.1 with updated device pack.
2. Assurance license
3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
regards
Maurus

CRM 2013 - Inconsistent javascript issue crash the web client and user needs to reopen

Hello,
We are using CRM 2013 on premise version and almost 600 users are using it. We have some inconsistent JavaScript issue (following is the log for same) which happens to users in a day or two. When this issue occurs user can not work in system and they have
to open new instance of CRM.
Does anybody knows about this error?
<CrmScriptErrorReport>
<ReportVersion>1.0</ReportVersion>
<ScriptErrorDetails>
   <Message>Unable to get property 'location' of undefined or null reference</Message>
   <Line>1</Line>
   <URL>/_static/_common/scripts/main.js?ver=1676323357</URL>
   <PageURL>/main.aspx#313155368</PageURL>
   <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe</Function>
   <CallStack>
    <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe";addPassiveAuthParameters($p0);var$v_0=$p0.toString();if(IsNull($p2))$p2=false;var$v_1=this.$18_3($p0,$p2);if($v_1){if(this.$2z_3()){window.location.reload();return}this.$2d_3();this.$1s_3();Mscrm.PerformanceTracing.write("Navigate",$v_0);!Mscrm.Utilities.isIE()&&this.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);this.$3_3.get_currentIFrame().contentWindow.location.replace($v_0)}else{this.$10_3();var$v_2=this.get_contentWindow().Sys.Application.findComponent("crmPageManager");if($v_2){!Mscrm.Utilities.isIE()&&$v_2.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);var$v_3={};$v_3["sourceUri"]=Mscrm.Utilities.getContentUrl(null);$v_2.raiseEvent(Mscrm.ScriptEvents.IFrameReactivated,$v_3)}}window.self.InnerIFrameSrcChangeTimestamp=(newDate).getTime();this.title=$p1;if(window.LOCID_UI_DIR==="RTL"&&$p0.toString().indexOf("PersonalWall")>=0&&window.UseTabletExperience)this.$3_3.get_currentIFrame().style.position="RELATIVE"}</Function>
   </CallStack>
</ScriptErrorDetails>
<ClientInformation>
   <BrowserUserAgent>Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)</BrowserUserAgent>
   <BrowserLanguage>en-US</BrowserLanguage>
   <SystemLanguage>en-US</SystemLanguage>
   <UserLanguage>en-US</UserLanguage>
   <ScreenResolution>1366x768</ScreenResolution>
   <ClientName>Web</ClientName>
   <ClientTime>2015-04-20T15:41:12</ClientTime>
</ClientInformation>
<ServerInformation>
    <OrgLanguage>1033</OrgLanguage>
    <OrgCulture>1033</OrgCulture>
    <UserLanguage>1033</UserLanguage>
    <UserCulture>1033</UserCulture>
    <OrgID>{E8BBA7AE-A552-DE11-B475-001E0B4882E2}</OrgID>
    <UserID>{614837CD-448B-DE11-A5E1-005056970D6C}</UserID>
    <CRMVersion>6.1.2.112</CRMVersion>
</ServerInformation>
</CrmScriptErrorReport>

Are you on-premise, or on-line? : It's on-premise
Can you reproduce it on-demand, or is it sporadic?: It's sporadic
There is a mention of loading an iFrame in the error, do you have iFrames on the form that generates this error?
It's not on specific forms, so can't identify that. Yes we have iframes on some forms.
Does it happen on any/all entity forms, or specific ones? Do the entity forms have any custom JavaScript on them?
It's not on specific forms. And yes we have javascript on almost all forms.
Do you have any network problems or slowness in your network? Does the problem happen when the network is busy?
We need to check this on next occurrence.
Do the users that see this error have any unusual add-ins or toolbars in their browser?  This is not for specific user. Its happening for all randomly.
Have you tried other browsers like Chrome or FireFox and do users see the problem there as well?
We need to check only for IE.

RFC login and user creation to remote system

Hi there,
Hopefully this is the related forum for this question. We have a scenario where we need an automated process to create users on one system and then create just the same account on a remote system with deactivated password.
How is this best handled in ABAP code where the system account info/password of the remote system is not listed in the abap code. Should a SM59 connection be created and then somehow this is referenced from abap code ?
Also, this will be a SM37 job stream running on the local server under one name running the job and in the code it should be using a different name (destination) for the remote connection to create the user.
I am a security person, not abaper. Input /best practice appreciated.
Thanks !

> I am a security person, not abaper. Input /best practice appreciated.
Actually this is a security question, so I have moved it to the security forum...
If the password is to be deactivated in the target system but not in the source ("master" system) then you can use several standard user provisioning mechanisms for this (CUA, GRC-CUP, IdM, UME configuration...) and configure the target system to deactivate the password itself. There are also several ways of achieving this, without any coding required necessarily.
The most obvious one which jumps to mind is RZ11 parameter login/password_change_for_SSO.
Alternately if your scenario is better suited to it, you can also use login/password_max_idle_initial.
Also see transaction RSUSR200.
Etc...
> Should a SM59 connection be created and then somehow this is referenced from abap code ?
No. It should be referenced from configuration of the application which calls the RFC connection, defined in SM59. You can also optionally use the "current user" setting and alternate authentication methods to (saved) passwords. This I would generally recommend.
Cheers,
Julius
Edited by: Julius Bussche on Feb 23, 2010 10:36 PM

Using BAPI to create users across all Clients and R/3 Systems

Hi everyone,
I'm currently writing a program where I'm using a BAPI to create multiple new users via central user admin (SU01) and assigning Roles to these users.
My objective is to create these new users in all clients of all R/3 systems using RFC. At the moment, in SM59, our DEV environment is set up as "DEV", QA as "TST" and PRD as "PRD". When I use syntax:
CALL FUNCTION 'BAPI_USER_CREATE1' DESTINATION 'TST' the system presents a logon screen to login to TST system. Can this logon be made automatic i.e. without this screen prompt?
Also, I can't create the users in all clients of 'TST'. Our test system has 5 clients...how do I create the users in all clients of TST automatically?
Your help will be greatly appreciated.
Thanks.
Sougata.

Try to see the SAP HELP:
RFC logon to target system (remote logon)
RFC logon within an R/3 system can be successfully undertaken using the same user ID even if the logon is to take place in a different client.
In principle, all necessary logon data for a particular RFC destination (language, user, client, and password) are used when an RFC logs on to the target system.
Typically the password field (for a particular user) must be maintained when an RFC communicates with other clients or user IDs.
If one of the fields language, client or user is not maintained for the designated RFC destination, default values are taken from the system environment (system table).
Tips:
With RFC communication within a single R/3 system with the same client and user the logon fields do not have to be maintained. Password entry is also unnecessary in this special case.
If an RFC logon in online mode is unsuccessful, an RFC logon window is displayed (not during background processing) where you can logon to the target system online at runtime.
The default values for the RFC logon screen fields are as follows:
Client
The standard value of the target system application server is used. This value is read from the target server's "login/system_client" profile parameter.
User
The system inserts the user ID of the current user in this field.
Language
Information from the RFC destination is used to fill the language field. If the language field has not been maintained in the destination, the current language of the calling system is inserted.
The RFC logon window does not appear if the initial function module call of the RFC destination originates from the system-specific function group 'SRFC'. The function modules RFC_PING and RFC_SYSTEM_INFO belong to this group among others.
If you would like to have an RFC logon window displayed regardless, you must end RFC communication to that particular RFC destination after the call using the function module 'RFC_CONNECTION_CLOSE'.
Be aware that no logon screen is usually offered when using trusted/trusting systems.
Documentation to authorization checks in the RFC environment can be found in RFC authorization concept.
Max

How to change the Client n user details for a model in Production

Hello Friends,
I have an application which is calling RFC function module from SAP R/3.
In development system while creating Model I have entered the Back end details like Client, User Name and Password.
If I transport the application into Production, The Client and user name will be different. In this case How would I change the client n user name details.
Do I have import again in Production. But does sounds a good idea.
ThanQ for Ur time.
Cheers.. Sam

When you create Model first time, to import Interface of RFC you would need to logon into R/3. But once you are done with the Interface, your connection to R/3 will be determined by the client and UID details in JCo connection.
Now when you transport your code from DEV to QA system, the JCo connection with the same name should be there. or else, you would need to create the same in the new server. I dont see a need to reimport the model. If that is the case, then developers would have to spend huge amount of time doing this job alone.
Hope this solves ur problem.
Regards
Murali.

Can we Automate User Creation in SAP IDES?

Hey Guys,
I found this piece of information on Internet somewhere.
"SAP provides a simple user creation mechanism for IDES system. An enhancement is already active by the name USRADMIN this contains code that executes just after the user logon. If somebody logs on as 'MUSTER' with password 'IDES' it prompts to create a user. and after the creation MUSTER is logged off. If the password of MUSTER is changed the program also reset the password to IDES always. the password is hard coded in the code
For this to be active an entry has to be maintained in the table zides_user_procc . In this table we maintain the SAP system SID, client where this functionality is to be active and also maintain the reference user which will be copied to the new user ."
*bol

It was a while back, but the logic was like this:
User logs into webpage on intranet. Lets just say that authentication to that resource is dealt with separately here.
User is presented with a form and fills in info like
UserID required
FirstName
LastName
email address
Password
This info is used by some backend VB code which initialises an RFC connection with SAP.
Once RFC is established, a function module to copy an existing template user is executed (template user contains roles to copy etc). The new user is created as required and you can then log on & use it.
To be honest, most self service sandbox systems tend to be the log in using existing user & create yourself a user or run a prog which will do it for you.
Hope that helps,
Cheers
Alex

CUP: user creation in CUA child client but incorrect CUP password feed back

Hi all,
This looks like the same unresolved post from Vincent Doux on this forum as well.
Re: AC CUP: user creation in child client when already exist in CUA
When we create a request for a new account to create a user in a CUA child client, - and the user already exists in the CUA master - we find that the password fed back by CUP via its email that has the password link in it, is not the one as it was created by CUA in the respective child client.
Ergo, the user can not log on with the password provided by CUP.
CUP's provisioning message is OK, the user is properly created in the child client but the the password given by email from CUP doesn't allow to connect user on to the child client.
As a contra-test: When creating the user directly from CUA manually the password is however working corrrectly on the child client.
Does someone know how to have the correct password (CUA) in the CUP email notification or how to solve this?
Both Java and CUA master and Child Client are on 5.3 SP 6. I checked OSS note 1168508
Regards
George

Hi George,
Have you got the CUA configuration settings maintained correctly?
CUP may not be referencing the correct destination and therefore maynot be interfacing correctly to provide the correct password.
Simon

Auto-user creation issue with OS10.6 clients

We're having an issue where if a user is created via Workgroup Manager (LDAP) and matches the local user's account credentials on their Mac (or possibly not) it will automatically add iCal calendars and things of that nature – i'm pretty sure i've seen this dialogue when creating a new account, it prompts whether you want Mac OS X to auto configure things for you. My client hasn't mentioned they've seen this dialogue but it rings in my mind. Does anyone have any idea how to disable this feature via the Server? It seems only related to 10.6 clients and servers. It is causing clashing of calendar issues, that don't particularly work either. Many thanks.

Bump.

All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time?

Multiple user creation in R12 and migration of users

I would like to know how we can automate a process of user creation in R12, or is there a way to create multiple users in Ebiz with respective responsibilities.
Second case is, migration of users from one instance to another. The problem out here is selective users not all?
Regards

Pl search the forums for FND_USER package - you will find several hits that show how this package can be used in a programmatic fashion to bulk create new users and assign responsibilities. Examples are also available on My Oracle Support.
To migrate user, use FNDLOAD. See this doc - you will also find hits in these forums if you search.
376469.1 - Can FNDLOAD Migrate User Accounts Without Forcing Users To Change Their Passwords?
HTH
Srini

My employer and I both have iPhone 5. We both recently updated as recommended. Now we can no longer text each other. I can text and receive from other iPhone users. Any ideas??

My employer and I both have iPhone 5. We both recently updated as recommended. Now we can no longer text each other. I can text and receive from other iPhone users. Any ideas??

Well, that didn't work since I am already using my appleID for both FaceTime and iMessage but i did see the option to send as SMS when iMessage not available. so I am now able to send to him but I don't know if he can send to me. It's a start. It is only with his phone. His wife has a Galaxy and they are both on AT&T and she can send and receive. I am on sprint. If that info helps

Client And User Creation in IDES

Similar Messages

Maybe you are looking for