Client and user to execute COM_PRODUCT_UPGRADE

Hello:
I am almost finishing the SAP upgrade from 46C to ECC 6.0; Upgrade Assistant is asking for execution of report COM_PRODUCT_UPGRADE using SE38.
¿Which client and user should I use to do this work? ¿Is it possible tio use client 000 and user DDIC? The manual is not clear about this.
Thank you.

Hi,
It does not appear important which client/user you execute the report COM_PRODUCT_UPGRADE:
Note 826092:
Executing conversion programs for product master
Page 6
In the upgrade guides for ramp-up, the following follow-up activity is
missing:
As of SAP netWeaver 2004s, several conversion reports needed for the
product master are bundled into a single report, COM_PRODUCT_UPGRADE.
If the upgrade log LONGPOST.LOG (displayed in phase CHK_POSTUP) requests
you to execute the upgrade report COM_PRODUCT_UPGRADE, after the
upgrade, call transaction SE38 and execute the report. A transport
request is created which you need to transport in all subsequent
systems. After the import of the transport request, you must run report
COM_PRODUCT_UPGRADE in the respective subsequent systems.
Regards,
Aidan

Similar Messages

Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
if ({@param} = 1 then
GroupName ({@GroupBy})
else
{NetPNL.GrossAfterAdj}
but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
MN 100
MN 200
MN 50
CA 300
CA 500
when the data shows in the report, its grouped by state, so it comes out like
MN 350
CA 800
I want the users to decide whether they want it sorted by state (ascending)
CA 800
MN 350
or Total quantity (asc)
MN 350
CA 800

Best client and user to use SPAM or SAINT

Hi Gurus,
Please tell me which is the best client and user to implement SPAM/SAINT . I read many forums but none gave me clear idea. Everybody are giving different opinions. Please guide me properly as im novice in basis.
Thanks

Hello,
Technically you can use DDIC in client 000 to run SAINT. But in order to track who ran the transaction, you can have a user with same authority as DDIC to run SAINT.
It has to be run in client 000. This is because the SAINT Packages are client independent. And the transaction SAINT will cascade the changes to all clients automatically.
Best Regards,
Joseph

Client And User Creation in IDES

Hi ,
I created new client 100 in Client 800 and the user DDIC With the Default PWD.
After the creation of client 100 in SCC4, I Hit the TC RZ10.
Here i selected Profile As "Instance Profile".
Here Where i Should Change parameter login/no_automatic_user_sapstar == 0.
Iam unable to see this.
Please help me in this.
Regards
Khanna

Hi Khanna,
Check these..
http://help.sap.com/saphelp_nw04/helpdata/en/3e/cdacecedc411d3a6510000e835363f/frameset.htm
/thread/327681 [original link is broken]
cheers,
prashanth

CRM 2013 - Inconsistent javascript issue crash the web client and user needs to reopen

Hello,
We are using CRM 2013 on premise version and almost 600 users are using it. We have some inconsistent JavaScript issue (following is the log for same) which happens to users in a day or two. When this issue occurs user can not work in system and they have
to open new instance of CRM.
Does anybody knows about this error?
<CrmScriptErrorReport>
<ReportVersion>1.0</ReportVersion>
<ScriptErrorDetails>
   <Message>Unable to get property 'location' of undefined or null reference</Message>
   <Line>1</Line>
   <URL>/_static/_common/scripts/main.js?ver=1676323357</URL>
   <PageURL>/main.aspx#313155368</PageURL>
   <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe</Function>
   <CallStack>
    <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe";addPassiveAuthParameters($p0);var$v_0=$p0.toString();if(IsNull($p2))$p2=false;var$v_1=this.$18_3($p0,$p2);if($v_1){if(this.$2z_3()){window.location.reload();return}this.$2d_3();this.$1s_3();Mscrm.PerformanceTracing.write("Navigate",$v_0);!Mscrm.Utilities.isIE()&&this.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);this.$3_3.get_currentIFrame().contentWindow.location.replace($v_0)}else{this.$10_3();var$v_2=this.get_contentWindow().Sys.Application.findComponent("crmPageManager");if($v_2){!Mscrm.Utilities.isIE()&&$v_2.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);var$v_3={};$v_3["sourceUri"]=Mscrm.Utilities.getContentUrl(null);$v_2.raiseEvent(Mscrm.ScriptEvents.IFrameReactivated,$v_3)}}window.self.InnerIFrameSrcChangeTimestamp=(newDate).getTime();this.title=$p1;if(window.LOCID_UI_DIR==="RTL"&&$p0.toString().indexOf("PersonalWall")>=0&&window.UseTabletExperience)this.$3_3.get_currentIFrame().style.position="RELATIVE"}</Function>
   </CallStack>
</ScriptErrorDetails>
<ClientInformation>
   <BrowserUserAgent>Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)</BrowserUserAgent>
   <BrowserLanguage>en-US</BrowserLanguage>
   <SystemLanguage>en-US</SystemLanguage>
   <UserLanguage>en-US</UserLanguage>
   <ScreenResolution>1366x768</ScreenResolution>
   <ClientName>Web</ClientName>
   <ClientTime>2015-04-20T15:41:12</ClientTime>
</ClientInformation>
<ServerInformation>
    <OrgLanguage>1033</OrgLanguage>
    <OrgCulture>1033</OrgCulture>
    <UserLanguage>1033</UserLanguage>
    <UserCulture>1033</UserCulture>
    <OrgID>{E8BBA7AE-A552-DE11-B475-001E0B4882E2}</OrgID>
    <UserID>{614837CD-448B-DE11-A5E1-005056970D6C}</UserID>
    <CRMVersion>6.1.2.112</CRMVersion>
</ServerInformation>
</CrmScriptErrorReport>

Are you on-premise, or on-line? : It's on-premise
Can you reproduce it on-demand, or is it sporadic?: It's sporadic
There is a mention of loading an iFrame in the error, do you have iFrames on the form that generates this error?
It's not on specific forms, so can't identify that. Yes we have iframes on some forms.
Does it happen on any/all entity forms, or specific ones? Do the entity forms have any custom JavaScript on them?
It's not on specific forms. And yes we have javascript on almost all forms.
Do you have any network problems or slowness in your network? Does the problem happen when the network is busy?
We need to check this on next occurrence.
Do the users that see this error have any unusual add-ins or toolbars in their browser?  This is not for specific user. Its happening for all randomly.
Have you tried other browsers like Chrome or FireFox and do users see the problem there as well?
We need to check only for IE.

Cisco Prime Infrastructure 2.2 clients and users IPs not detected

Hi all,
I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
please advice what may be the issue ?

Hi,
does anyone happen to know if that problem is fixed? My currently setup looks like this:
1. Cisco Prime Infrastructure 2.1 with updated device pack.
2. Assurance license
3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
regards
Maurus

Using BAPI to create users across all Clients and R/3 Systems

Hi everyone,
I'm currently writing a program where I'm using a BAPI to create multiple new users via central user admin (SU01) and assigning Roles to these users.
My objective is to create these new users in all clients of all R/3 systems using RFC. At the moment, in SM59, our DEV environment is set up as "DEV", QA as "TST" and PRD as "PRD". When I use syntax:
CALL FUNCTION 'BAPI_USER_CREATE1' DESTINATION 'TST' the system presents a logon screen to login to TST system. Can this logon be made automatic i.e. without this screen prompt?
Also, I can't create the users in all clients of 'TST'. Our test system has 5 clients...how do I create the users in all clients of TST automatically?
Your help will be greatly appreciated.
Thanks.
Sougata.

Try to see the SAP HELP:
RFC logon to target system (remote logon)
RFC logon within an R/3 system can be successfully undertaken using the same user ID even if the logon is to take place in a different client.
In principle, all necessary logon data for a particular RFC destination (language, user, client, and password) are used when an RFC logs on to the target system.
Typically the password field (for a particular user) must be maintained when an RFC communicates with other clients or user IDs.
If one of the fields language, client or user is not maintained for the designated RFC destination, default values are taken from the system environment (system table).
Tips:
With RFC communication within a single R/3 system with the same client and user the logon fields do not have to be maintained. Password entry is also unnecessary in this special case.
If an RFC logon in online mode is unsuccessful, an RFC logon window is displayed (not during background processing) where you can logon to the target system online at runtime.
The default values for the RFC logon screen fields are as follows:
Client
The standard value of the target system application server is used. This value is read from the target server's "login/system_client" profile parameter.
User
The system inserts the user ID of the current user in this field.
Language
Information from the RFC destination is used to fill the language field. If the language field has not been maintained in the destination, the current language of the calling system is inserted.
The RFC logon window does not appear if the initial function module call of the RFC destination originates from the system-specific function group 'SRFC'. The function modules RFC_PING and RFC_SYSTEM_INFO belong to this group among others.
If you would like to have an RFC logon window displayed regardless, you must end RFC communication to that particular RFC destination after the call using the function module 'RFC_CONNECTION_CLOSE'.
Be aware that no logon screen is usually offered when using trusted/trusting systems.
Documentation to authorization checks in the RFC environment can be found in RFC authorization concept.
Max

How to change the Client n user details for a model in Production

Hello Friends,
I have an application which is calling RFC function module from SAP R/3.
In development system while creating Model I have entered the Back end details like Client, User Name and Password.
If I transport the application into Production, The Client and user name will be different. In this case How would I change the client n user name details.
Do I have import again in Production. But does sounds a good idea.
ThanQ for Ur time.
Cheers.. Sam

When you create Model first time, to import Interface of RFC you would need to logon into R/3. But once you are done with the Interface, your connection to R/3 will be determined by the client and UID details in JCo connection.
Now when you transport your code from DEV to QA system, the JCo connection with the same name should be there. or else, you would need to create the same in the new server. I dont see a need to reimport the model. If that is the case, then developers would have to spend huge amount of time doing this job alone.
Hope this solves ur problem.
Regards
Murali.

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what?

Win 7 client with machine and user auth stuck in 802.1x_REQD

Hi everybody
we have a WLC 5508 with 7.2.110.0 and an ACS 5.3 and do the following:
- Win 7 client gets a GPO object with the wlan configuration for "Machine and User authentication" with PEAP
- On ACS 5.3 I configured correctly the authentication and authorization for first machine authentication and then user authentication ("Was machine authenticated = true)
- First when machine authentication happens, the client is configured into a quarantine VLAN, where it is only allowed to communicate with the domain controllers
- When the user authenication happens, the client is moved into the productive client vlan with no restrictions.
Everything works fine, except that after the user loggs in, it takes about 3 minutes until the client answers the EAP Identity Request and loggs in, see attached screenshot or the screenshot below:
In the client status on WLC i can see that the client is stuck in the 802.1x_REQD state for these 3 minutes, until suddenly it authenticates (but then very often, about 5 times - see screenshot).
We tried the following to find the problem spot. but we were not able to locate the problem:
- Configure the machine and user authentication into the same vlan all the time
- ONLY user authentication on the client
- Played with the Win 7 settings (timers, and so on)
- When we manually configured the WLAN profile on the Win 7 client and saved it, the Win 7 client connected to the SSID without any problems and without any delay (about 5 seconds after the save)
Did someone ever had the same issue?
Thanks a lot and best regards
Dominic

Hi Amjad
very good point on this, thanks a lot. In this case, I did not even think about the client firmware side, thought that I should be the WLC or the client settings, but not the driver. We will give a shot on this next week, maybe this will help us to solve the problem.
It is normal to have the clietn in 802.1x_REQD if it is not yet authenticated and that is the expected state to be at in your situation untlil the client fully authenticates.
Absolutely correct that the client is associated and in the 802.1x_REQD state as long as the authenticator did not get the EAP identity Response, but that the client takes such a long time to answer is not normal ;-)
- What is the supplicant that is used on the windows machines? default WLAN supplicant? or you use some commercial supplicants?
WZC.
- what is the result when testing with user auth only?
The same, it takes such a long time.
- what ist he result when testing with machine auth only?
Machine authentication works as expected, fast and as soon as the client is booted, the client gets authenticated.
Regards and have a nice weekend
Dominic

Cisco ISE - Computer and User Authenticiation on AD for Wireless Clients.

Hello all,
I am trying to configure Cisco ISE to authenticate/authorize Wireless access with PEAP MsChapv2.
The AD user authorization works fine, but I cannot see on the logs a challenge for the computer verification (it must be a domain member).
I have found an attribute I would use for this action, but I cannot use it, because I don't see the challenge for the computer challenge.
Can you explain me if this fact is involved by the ISE configuration or by the client configuration ?
Thanks a lot for your help.
The followings screenshots show the logs appearing in the ISE :
Kind regards, Emeric.

This is a great question and I wanted to add my input and I have a question as well. My understanding in order to do both Machine and User EAP-Chaining is required, which used EAP-FAST.
In my testing, when a domain box is configured for computer/user authentication. When the laptop started up it will authenticate with a host/ and sid in the log.
When the user logs in you then see the user ID.
For my benefit when rule are you talking about ?
Thank you

Anyconnect client and clientless connections hang for two users

ASA 5525, v. 9.1(5)19
Anyconnect client 3.1.02026
I have two users who are unable to connect via the AC client or clientless through the web portal. Using the client, it will get stuck in a loop of "checking for updates". On the portal, the connection will proceed to the point of "Cisco Secure Desktop successfully validated... Success.. Reloading..please wait." Then it hangs there.
The issue occurs for the user regardless of which company laptop she logs onto. A help desk tech can use her laptop and successfully connect, but she cannot connect on her own laptop or on another laptop. (Same for the other user.) So the issue doesn't seem to be related to her laptop or the AC installation. (Help desk did reimage her machine early in the troubleshooting process before they realized that the issue seemed to follow the user.)
I've updated the hostscan file - no change in results. Client and clientless connections seem to be working fine for all other users. We're stumped. Suggestions, anyone? thanks!

The LDAP should be server folks -- Active Directory. Chances are whoever manages the ASA's should have access to at least look in Active Directory to look that up. If they don't they need it.
I obviously don't know a lot about what devices you are using, but if you are using ISE, there should be some type of MNT device (Monitoring and Troubleshooting) -- which is collecting the logs and, hopefully, sending them to some type of syslog aggregate collection tool (splunk?).
Otherwise, there should be a device called a CAM (Clean Access Manager) that is collecting logs -- which may also be propagated to a syslog aggregate tool -- although with CAM's, you can pull the reports right out of them in a comma deliminated file (.csv) and go through them that way.
-- The thing that gets me is that it happens to two users no matter what computer they try to connect from, no matter what network they connect from, and other users can authenticate and gain network access on those same devices.
-- That is why it is rather perplexing. Pretty much saying it has to be something with:
- the IP pool they are getting an IP from
- their AD credentials
- their username
- something along those lines, if the information provided was fully accurate.

Netboot, diskless clients, and Open Directory users?

Hi, I've been reading through the System Image pdf & maybe it's me but a couple of things aren't clear.
I want to set up diskless clients and allow users to log on to their network home folder using their OD login. Is this possible and where would be a good place to start with instructions on setup?
thanks, Patrick

Ok, I got it.
But what if I want the OD user to have some configuration data on the local client?
Let me explain that a bit better. The configuration I would like for my network and users is as follows: the server works only as an authentication server, I do not want roaming profiles or homes directory on the server; I just want the server to authenticate users when they log in to several client machines amongst the lan.
For documents sharing, in fact, I much rather prefer using Dropbox, which allows my users to share on a WAN-instead-of-LAN basis.
But a home local directory is needed for OD users to keep libraries, preferences files and so on.
Back to the old Windows server (PDC) time, I used the server as a name server authentication only, still the client created a local profile for the user of the server.
Does OD works this way too or am I missing something?
Thank you.

Reports Executed from SA38 and user name

Hi,
I wanted to find the reports executed from sA38 and the user name who did it
We are able to get the information from STAD, but we are able to get only one day's data
Please let me know if there is any table , where i can get the information of all the list of Reports and users executed from SA38
Thanks in Advance

Hello Balaji
you need to turn on audit log ...through sm19 you can to that,not only the user but report name
which is executed is also available when you turn on the audit (sm19),after that you can check
the daily audits by tcode sm20.so browse for it...you may get more information.
regards,
Manjula.

Policy to force use of AD photos only is not working (global policy and client policy) - Users can change their picture

Hi,
On Lync server 2013 we are trying to disable the option to change the photo on lync client, the global policy has been set to display only AD photos, this didn't work so we create a client policy with the same setting and applied to users but is not working.
Is there something that we are missing?
Regards.

So you mean to say the "Edit or Remove Picture" button is active on the Lync client and you want to disable it?
AFAIK, The button is active if you are on Exchange 2013. Is this true for you?
If Yes, maybe you can try this on your Exchange Shell.
Set-OwaVirtualDirectory -identity "owa (Default Web Site)" -SetPhotoEnabled $False
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you have asked, please mark the thread as answered to aid others when they are looking for solutions to similar problems or queries. <p>-------------------------------------------------------
</p> <p>The opinions expressed here are solely my own and do not express the views or opinions of my employer.</p>

Client and user to execute COM_PRODUCT_UPGRADE

Similar Messages

Maybe you are looking for