Client Backup Service stopped, can not be restarted

Recently I started to get a critical error saying the service Windows Server Essentials Computer Backup is not running.
It did work before and I hadn't made any changes to the server.
I can not repair the error / restart the service. It will stop again in a few seconds.
I have installed the latest updates to my WSE 2012 R2.
I have tried to move the backup folder to different hard drives, and I have checked all disks for errors. I tried to empty the folder and ran the "wbadmin delete catalog" command.
How can I continue my troubleshooting?
Thanks.

I have the same problem. The service can be restarted but stops immediately. I checked the log files and found this:
[04/23/2015 13:57:03 2d80] *******************************************************************
[04/23/2015 13:57:03 2d80] Backup Service Started.
[04/23/2015 13:57:03  ab8] Listener: Created
[04/23/2015 13:57:03  ab8] StartStopFiles: Backup data file directory is F:\ServerFolders\Client Computer Backups
[04/23/2015 13:57:03  ab8] MainService: Error: The Windows Server Client Computer Backup Service encountered the following error: Error code: 38 API name: unexpected EOF File: F:\ServerFolders\Client Computer Backups\Commit.dat Error: 38
[04/23/2015 13:57:03  ab8] MainService: Error: The Windows Server Client Computer Backup Service failed at (546) of (admin\serveressentials\backup\pc\util\diskfile.cpp)
[04/23/2015 14:40:01 2b98] *******************************************************************
[04/23/2015 14:40:01 2b98] Backup Service Started.
[04/23/2015 14:40:01 32e8] Listener: Created
[04/23/2015 14:40:01 32e8] StartStopFiles: Backup data file directory is F:\ServerFolders\Client Computer Backups
[04/23/2015 14:40:01 32e8] MainService: Error: The Windows Server Client Computer Backup Service encountered the following error: Error code: 38 API name: unexpected EOF File: F:\ServerFolders\Client Computer Backups\Commit.dat Error: 38
[04/23/2015 14:40:01 32e8] MainService: Error: The Windows Server Client Computer Backup Service failed at (546) of (admin\serveressentials\backup\pc\util\diskfile.cpp)
[04/23/2015 14:43:43 2bc0] *******************************************************************
[04/23/2015 14:43:43 2bc0] Backup Service Started.
[04/23/2015 14:43:43 3270] Listener: Created
[04/23/2015 14:43:43 3270] StartStopFiles: Backup data file directory is F:\ServerFolders\Client Computer Backups
[04/23/2015 14:43:43 3270] MainService: Error: The Windows Server Client Computer Backup Service encountered the following error: Error code: 38 API name: unexpected EOF File: F:\ServerFolders\Client Computer Backups\Commit.dat Error: 38
[04/23/2015 14:43:43 3270] MainService: Error: The Windows Server Client Computer Backup Service failed at (546) of (admin\serveressentials\backup\pc\util\diskfile.cpp)
I tried to rename or delete 'Commit.dat' but was not able to. Got an 'access denied' error or "You require permission from SYSTEM to make changes to this file"
I tried to change the owner of the file but got another 'access denied' error. I am logged in with an administrator account. All help would be much appreciated
Thanks
Bert-Jan

Similar Messages

  • 2012 R2 Essentials - Client Restore Service installation did not succeed.

    I have setup the computer backups successfully and I have verified that the workstations are creating the client backups. The issue I have now is trying to setup the Client Restore Service. Initially, it said I was missing the ADK which was expected since
    it was a fresh install so I used the link and it downloaded the ADK for Windows 8.1.
    Now when I try to setup the Client Restore Service in the wizard, after I click on Start it updates the status to "Customizing WinPE images..." and after 5 minutes, I get the following error:
    Client Restore Service installation did not succeed.
    Cannot customize the client restore image.
    The specified image file did not contain a resource section.
    If I click on Start to begin the process again, and I browse to the C:\Windows\Temp folder, I can see the two mounted folders for the customizing process:
    C:\Windows\Temp:
    GenBmrWinPETempPath: 8096c353-79cb-4d74-ae8d-3c287fdb735c : which remains empty and removes after failure.
    GenBmrWinPEMountPath: c32700c9-7391-4caf-9a7e-af420e96d327 : mounted WIM with directory structure but removes after failure when it unmounts.
    During the process, I also see the boot.wim in the following folder, "C:\ProgramData\Microsoft\Windows Server\Data\ClientRestore\8.100.25984_8.100.25984_6.3.9600.16384\0409\sources", with a filesize of 172,644KB.
    the GenBmrState.xml file contains the following information:
    <?xml version="1.0" encoding="utf-8"?><GenBmrJobExecutionInfo xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><Status>Idle</Status><LastStage>CustomizeWinPE</LastStage><OemImagesExist>false</OemImagesExist><AdkReady>true</AdkReady><ImageReady>false</ImageReady><MediaReady>false</MediaReady><WdsImageDeployed>false</WdsImageDeployed><Results><GenBmrJobResultPair><Key>Wds</Key><Value><Failed>true</Failed><Reason>CustomizeImageFailed</Reason><AdditionalErrorCode>0</AdditionalErrorCode><AdditionalErrorMessage>The
    specified image file did not contain a resource section.
    </AdditionalErrorMessage></Value></GenBmrJobResultPair></Results></GenBmrJobExecutionInfo>
    Does anyone know how to fix the "The specified image file did not contain a resource section" error?

    Thank you for your reply! Hopefully answering your questions will provide further input! I did look over the article you linked but that is the same procedure I followed except I receive the error after the ADK is installed and I click on the Start button
    which says it is "Customizing WinPE Images..."
    1. This is a Windows Server 2012 R2 Essentials installation from the Essentials media. It is not a role added to another edition of Windows Server 2012 R2.
    2. Yes, I have rebooted many times and the problem still persists.
    3. Yes, the WinPE-Setup.cab file does exist!
    4. I am copying an excerpt from the log that pretains to the error!
    Log:
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dmdskres.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\dmdskres.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dmdskres2.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\dmdskres2.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dmocx.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\dmocx.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dmutil.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\mmc.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dmutil.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\mmc.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\en-US\hh.exe.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\hh.exe.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\iepeers.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\iepeers.dll.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\dwwin.exe.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\dwwin.exe.mui".
    [13336] 140705.213958.2249: GenBmr: Copying "C:\Windows\system32\en-US\diskmgmt.msc" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\diskmgmt.msc".
    [13336] 140705.213958.2405: GenBmr: Copying "C:\Program Files\Windows Server\Bin\ClientRestore\en-US\RestoreWizardResources.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\RestoreWizardResources.dll.mui".
    [13336] 140705.213958.2405: GenBmr: Copying "C:\Program Files\Windows Server\Bin\ClientRestore\en-US\WSSDriverSetupResources.dll.mui" to "C:\Windows\TEMP\c32700c9-7391-4caf-9a7e-af420e96d327\Windows\System32\en-US\WSSDriverSetupResources.dll.mui".
    [13336] 140705.213958.2405: GenBmr: Applying cabs.
    [13336] 140705.213958.3499: GenBmr: Applying "C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\Amd64\WinPE_OCs\WinPE-Setup.cab".
    [13336] 140705.213959.9281: GenBmr: Customize WinPE failed: System.Management.Automation.CmdletInvocationException: The specified image file did not contain a resource section.
     ---> System.Runtime.InteropServices.COMException: The specified image file did not contain a resource section.
       at System.Management.Automation.MshCommandRuntime.ThrowTerminatingError(ErrorRecord errorRecord)
       --- End of inner exception stack trace ---
       at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
       at Microsoft.WindowsServerSolutions.PowerShell.PSRuntime.ExecuteCommandPrivate(String command, PSParameterList parameterList)
       at Microsoft.WindowsServerSolutions.PowerShell.PSRuntime.ExecuteCommand(String command, PSParameterList parameterList)
       at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.GenBmr.Tasks.CustomizeWinPETask.ApplyCabsInternal(IEnumerable`1 cabsToApply, FilePathSubstituter substituter, String mountPath, PSRuntime psRunTime, Boolean multiLang)
       at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.GenBmr.Tasks.CustomizeWinPETask.ApplyCabs(String mountPath, ImageKind imageKind, IEnumerable`1 serverLanguages)
       at Microsoft.WindowsServerSolutions.DataProtection.PCBackup.BackupUtil.GenBmr.Tasks.CustomizeWinPETask.CustomizeImage(ImageKind imageKind)
    [13336] 140705.213959.9281: Task: In Task CustomizeWinPE: 
    [13336] 140705.213959.9281: TaskManagement: In TaskScheduler.ReportStatus(): Task("CustomizeWinPE") requested the engine stop processing Tasks!  Completed=True, Success=False
    [13336] 140705.213959.9281: GenBmr: Unmounting the image discarding changes.

  • Safari locks up on my macbook air and can not be restarted.

    Safari locks up on my macbook air and can not be restarted.  Doing a reboot gets me back to normal but every time I restart Safari it goes to the locked up page.

    Quit Safari. If it won't quit in the usual way, select
     ▹ Force Quit...
    from the menu bar, then select Safari from the list and press return.
    Relaunch Safari by holding down the shift  key and clicking its icon in the Dock. That will stop the bad page from reloading automatically. From the menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    to get rid of any cookies or other data left by the server.

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

  • How do I delete my old iPhone backup since I can not back up my new phone.  Will I lose any pictures?  Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up.  Thanks, been trying to do this for a long time.

    I want to delete my old iPhone backup since I can not back up my new phone.  Will I lose any pictures?  Can you ever see what is actually on the cloud? Last, how do I delete the old iPhone back up.  Thanks, been trying to do this for a long time.

    Deleting the backup only permanently deletes the backup from iCloud.  It doesn't do anything to the data currently in your account or on your devices.  To delete it, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of the device that you want to delete the backup for, then tap Delete Backup.
    You can't see anything in an iCloud backup, if that's want you're asking.  You can only restore it to your device.  You can, of course, see your other iCloud data.

  • When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup.  I can not find this backup file to delete it and free up the space

    When i look at how much hard drive space i have available, my mac says i have 250 gigs used up in backup.  I can not find this backup file to delete it and free up the space

    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.

  • Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

    Where is the customer service? Can not use my subscribtion on the second computer, it does not download keeps seeying buy buy buy

  • Can not logout, restart or shutdown

    I have a Mac running 10.5.8. I have seen this on different models as well.
    The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
    In the past the only way I could fix it was to create a new profile. There must be an easier way. does anyone know which files I should delete instead of having to create a new profile?

    Richard Saunders wrote:
    The user can not logout, restart or shutdown. When those commands are selected in the GUI nothing happens.
    I'd launch the Console utility and look for messages that might explain the cause of the problem. You might find that it's due to a process that refuses to quit.

  • 'Windows Media Center Receiver Service' stops and cannot be restarted

    Hi,
    I have had some issues with running my Hauppage TV Tuners (WinTV-HVR-2200) on a new Windows 7 Home Premium Installation.
    After installing the TV Tuner card, drivers and WMC support software - I am able to configure my TV channels through Windows Media Centre and all is working fine. I can watch and record TV, so it all seems to be OK. It is only AFTER I restart my computer
    that I get an error 'Viewing/Listening Device is currently not available' when trying to watch TV in WMC again.
    I troubleshooted this issue and found that 'Windows Media Centre Receiver Service' was not running and when I tried to restart the service (via services.msc) it comes up with the following error:
    "0x80070003: File path not found"
    I have checked the Windows directory for ehrecvr.exe (the file that the service is linked to) and it is not corrupted or moved but I cannot re-link or restart the service.
    I tried the following tasks to remedy the issue and none of them were successful:
    Run SFC from cmd prompt - no issues were found
    Changed the 'logon' details for the service from Network to Local
    Changed the start type of the service from manual to automatic
    Restored previous versions of windows - prior to windows updates
    Re-install TV Tuner drivers and software
    Updated to the latest drivers and software version of 'WinTV' (Hauppage TV Tuner Software)
    Complete new installation of windows, including a format of the HDD - without installing additional third party software or anit-virus software
    Re-seat the TV tuner in a new PCI slot
    The only way that I am able to remedy the issue is if I disable and then re-enable WMC via 'optionalfeatures'. This then allows the service to start again, I can then configure my TV tuner in WMC but it still has issues after restarting the PC!
    It would appear that by configuring the TV tuners in WMC, it causes a conflict in the service so that it cannot be restarted after it is stopped. Note: I can start/stop the service with the TV tuner cards installed on my PC - it is only when I configure
    the TV channels in WMC that it then has issues.
    I have had these TV tuners running without any issues for over 2 years; however I have upgraded the motherboard and CPU and this issue has only just started happening. I am at a loss of what to look at next...
    Any help would be much appreciated!
    Thanks

    I shall suggest you :
    1. uninstall WinTV software and reinstall WMC from the scratch.
    2. Disable AV or any other internet security application during configuring WMC.
    3. Update the TV Tuner card driver from Hauppage's website (only WMC driver and no other application)
    Run Setup Again.
    Open WMC > Tasks > Settings > General > Windows Media Center Setup > Run Setup Again
    Does it help?
    If the above doesn't help then try resetting WMC:-
    Open Control Panel > Uninstall a Program > Turn Windows Features on or off > Scroll down to Media Features > Uncheck the box against Windows Media Center > Follow on screen instructions > Reboot > Again open Turn Windows Features on
    or off under Control Panel > Scroll down to Media Features > Check the box against Windows Media Center.
    Now reconfigure WMC again
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • [SOLVED] Can not shutdown/restart from KDE with systemd

    Hello,
      Recently, following I switched to a pure systemd setup.  The process was simple and most things worked "right out of the bpx".  However, I can not shutdown or restart from KDE!
    Let's say that I do the 3 finger salute (ALT-CTRL-DEL) and select "Turn off computer" what I get is KDE shutting down, but then I will only get a console (TTY) login prompt.  Pressing ALT-CTRL-DEL then will trigger a reboot.  I can also login and use "systemctl poweroff".  However, I don't understand why it doesn't work straight from KDE.
    Are there some packages I must install?  Are there some systemd services that I must enable?  What other relevant info should I include in this post?
    Active units :
    UNIT LOAD ACTIVE SUB JOB DESCRIPTION
    proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
    sys-devi...d-card0.device loaded active plugged MCP79 High Definition Audio
    sys-devi...da-sda1.device loaded active plugged ST9500420ASG
    sys-devi...da-sda2.device loaded active plugged ST9500420ASG
    sys-devi...da-sda3.device loaded active plugged ST9500420ASG
    sys-devi...da-sda4.device loaded active plugged ST9500420ASG
    sys-devi...da-sda5.device loaded active plugged ST9500420ASG
    sys-devi...da-sda6.device loaded active plugged ST9500420ASG
    sys-devi...ock-sda.device loaded active plugged ST9500420ASG
    sys-devi...et-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
    sys-devi...t-wlan0.device loaded active plugged AR928X Wireless Network Adapter (PCI-Express)
    sys-devi...y-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
    sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-module-fuse.device loaded active plugged /sys/module/fuse
    -.mount loaded active mounted /
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    home.mount loaded active mounted /home
    run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
    sys-fs-f...nections.mount loaded active mounted FUSE Control File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted /tmp
    cups.path loaded active waiting CUPS Printer Service Spool
    systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    bluetooth.service loaded active running Bluetooth service
    colord-sane.service loaded active running Daemon for monitoring attached scanners and registering them with colord
    colord.service loaded active running Manage, Install and Generate Color Profiles
    console-...daemon.service loaded active running Console Manager
    console-...-start.service loaded active exited Console System Startup Logging
    cups.service loaded active running CUPS Printing Service
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running Getty on tty1
    kdm.service loaded active running K Display Manager
    NetworkManager.service loaded active running Network Manager
    sshd.service loaded active running OpenSSH Daemon
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-...s-load.service loaded active exited Load Kernel Modules
    systemd-...unt-fs.service loaded active exited Remount Root and Kernel File Systems
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-...rigger.service loaded active exited udev Coldplug all Devices
    systemd-udevd.service loaded active running udev Kernel Device Manager
    systemd-...ssions.service loaded active exited Permit User Sessions
    systemd-...-setup.service loaded active exited Setup Virtual Console
    udisks2.service loaded active running Storage Daemon
    upower.service loaded active running Daemon for power management
    wpa_supplicant.service loaded active running WPA supplicant
    cups.socket loaded active running CUPS Printing Service Sockets
    dbus.socket loaded active running D-Bus System Message Bus Socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-...control.socket loaded active listening udev Control Socket
    systemd-...-kernel.socket loaded active running udev Kernel Socket
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    network.target loaded active active Network
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    JOB = Pending job for the unit.
    72 units listed. Pass --all to see inactive units, too.
    Last edited by Prozzaks (2012-08-20 17:35:48)

    Demon wrote:For me the system only halts, it does not poweroff. How I can solve this?
    As bgc1954 said, there is also a symlink "/sbin/poweroff". Just edit the file "/usr/share/config/kdm/kdmrc", go to [shutdown] an replace the line "HaltCmd=/sbin/halt" with "HaltCmd=/sbin/poweroff".

  • WPs are dying and can not be restarted with EyeDestroyed error in trace

    Hi,
    since few days WPs started dying and we can not restart them on central instance (on dialog instance running on different server, everything looks ok). IN the trace file of wps, we find following error message:
    M  rdisp/wp_abap_restart = 0
    M  ThSetThToolParam : restartable_wp[0] = FALSE
    M  ThSetThToolParam : restartable_wp[1] = TRUE
    M  ThSetThToolParam : restartable_wp[2] = TRUE
    M  ThSetThToolParam : restartable_wp[3] = FALSE
    M  ThSetThToolParam : restartable_wp[4] = TRUE
    M  ThSetThToolParam : restartable_wp[5] = TRUE
    M  ThSetThToolParam : restartable_wp[6] = TRUE
    M  ThDtWpBlk: detach WP ca_blk 127
    M  ThISend: clear stat record
    M  PfClearAllRec: clear statistic area
    M  ThISend: stat_state = TH_STAT_CLEAR
    M  ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
    M  make DISP owner of wp_ca_blk 127
    M  DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 56996)
    M  -OUT- sender_id WORK_PROCESS      tid  -1    wp_ca_blk   127     wp_id 6
    M  -OUT- action    SEND_TO_DP        uid  -1    appc_ca_blk -1      type  NOWP
    M  -OUT- new_stat  WP_WAIT           mode 0     len         8       rq_id 56996
    M  REL APPC ca_blk 120
    M  ThDtAppcBlk: detach APPC ca_blk 120
    I  *** ERROR => Shared Pool=10 Key=13 EyeBefore Violation [shmux.c      3422]
    M  ***LOG R1D=> TH_PRIV_OUT_CHECK, Eye destroyed () [thxxhead.c   9818]
    M  in_ThErrHandle: 1
    M  *** ERROR => TH_PRIV_OUT_CHECK: EyeDestroyed (step 5, th_errno 5, action 3, level 1) [thxxhead.c   10237]

    hi Andrija Jevtic,
    It seems the problem is caused by kernel.
    please upgrade your kernel to the latest version.
    Don't forget to backup your old kernel before do the upgrade.
    Let me know if still problem.
    Regards
    Ariyanto

  • Why a thread can not be restarted?????

    Hi,
    I have a thread and I started it by claling thread.start() and some where in my code i want to say thread.start(), which jvm won't allow me to do so... could u please reason me elaborately?????????
    Thanks
    Sato.

    Essentially once a Thread has been started it cannot be started again regardless of its current running state.
    Calling start on a started Thread makes no sense. Neither does calling start on a Thread that has finished make sense although for less obvious reasons.
    You can query a Thread to see if it is still active (has been started and not yet completed) via the isAlive() method.
    You can then query the Thread you want to start with code like this
    if(!myThread.isAlive()) {
        myThread.start();
    }This code works fine when the Thread is still running however what happens when the Thread has run to completion?
    Well it is often best to offer more complete state information about your Thread class...
    class MyThread extends Thread {
        boolean hasRun;
        public MyThread() {
            this.hasRun = false;
        public void start() {
            super.start();
            this.hasRun = true;
        public boolean hasRun() {
            return this.hasRun;
        public void run() {
    if(!myThread.isAlive() && !myThread.hasRun()) {
        myThread.start();
    }In this way you can not only see if instances of your Thread class are currently active but also if they have completed.
    As to the rest of you posters, why pick on him like that? If you don't know the answers then don't post anything.

  • Use DPM to backup Exchange DAG can not see the database

    Hi，
    I want to use DPM to backup Exchange DAG, but when I create the protection group, I can't open the dag to choose the database.
    If somebody can tell me what's wrong with it? How to troubleshoot this problem?
    The version of DPM is 2012 sp1,and the version of Exchange is 2013.
    I'm sorry that I could just provide a picture in Chinese.
    I received this event on the DPM Server：
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Event ID:      10016
    Description:
    The application-specific permission settings do not grant Remote Launch permission for the COM Server application with CLSID {CC7D8A18-C386-48D5-9906-4FFC77A39788}  to the user DOMAIN\DC$ SID (S-1-5-21-3005733532-2211877466-3700573520-15394).
    This security permission can be modified using the Component Services administrative tool.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10016</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-08T08:25:20.222501400Z" />
        <EventRecordID>2715</EventRecordID>
        <Correlation />
        <Execution ProcessID="856" ThreadID="2380" />
        <Channel>System</Channel>
        <Computer>DPMSERVER.domain.local</Computer>
        <Security UserID="S-1-5-21-3005733532-2211877466-3700573520-15394" />
      </System>
      <EventData>
        <Data Name="param1">application-specific</Data>
        <Data Name="param2">Remote</Data>
        <Data Name="param3">Launch</Data>
        <Data Name="param4">{CC7D8A18-C386-48D5-9906-4FFC77A39788}</Data>
        <Data Name="param5">{A3B9D3F4-2477-4F95-B2D1-F75B0FDF2A0E}</Data>
        <Data Name="param6">DOMAIN</Data>
        <Data Name="param7">DC$</Data>
        <Data Name="param8">S-1-5-21-3005733532-2211877466-3700573520-15394</Data>
        <Data Name="param9">172.16.103.3</Data>
        <Data Name="param10">Unavailable</Data>
        <Data Name="param11">Unavailable</Data>
      </EventData>
    </Event>
    Kindly clarify me, Thanks in advance.
    thorne

    Hi,
    please take a look at this:
    http://social.technet.microsoft.com/Forums/en-US/0d876796-cef4-4ec4-a76e-dcda8c0bcea8/dpm-2012-sp1-protecting-exchange-2010-and-exchange-2013-at-the-same-time?forum=dpmexchbackup
    regards
    /bkpfast
    My postings are provided "AS IS" with no warranties and confer no rights

  • Media Service Stops Running and Cannot Restart

    I get "One or more services are not running" - when I try to repair the issue, it doesn't fix it.
    When I go to Services, to try to restart the service, Windows Server Media Streaming Service (wssmsc), it states "Error 1069: The service did not start due to a logon failure."
    When I go to "Log On" for the service, it shows "This account:  Workgroup\MediaAdmin$  Not sure what the password should be.
    When I go to the "Dashboard" and try to restart the "Media", there is no option under "Settings", just "General" and "Anywhere Access".
    This is on WSE 2012 (NOT R2).
    Any assistance would be appreciated!
    Thanks. Paul Carvajal

    Hi Paul,
    Based on your description, please refer to following operations and check if can help you.
    Please open Group Policy Management and navigate to Default Domain Controller Policy, then right click it and select Edit.
    When GPME appeared, please follow the path: Computer Configuration-> Policies-> Windows Settings-> Security Settings-> Local Policies-> User Rights Assignment->
    Log on as a service.
    Please check Define these policy settings and add the
    MediaAdmin$ account to Log on as a service.
    Then please restart Windows Server Media Streaming Service and monitor the restart.
    If this issue still persists, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs, then view
    the Dashboard log file and some other log files which be related to Media Streaming, check if you can find some more clues. (Please note: the log file is a hidden file. Please open Control Panel, select Folder Options, select View tab and check Show hidden
    files, folders and drives. Then you will be able to find the log file.)
    Hope this helps.
    Best regards,
    Justin Gu

  • Lost "Encrypt iPhone Backup PW and can not Restore iPhone from iTunes?

    Late LATE night attempt to Reset iPhone via USB connection to iTunes ened up insread with me Erasing All Content and Settings from iPhone directly after encrypted back up of phone to Macbook then attempting Restore from Macbook to iPhone. Lost most of my iPhone contacts and still cannot remember or find copy of pw for encrypted backup UNLESS that is because my Macbook is now encrypted with FileVault. I put a copy of the password for encrypting iPhone Backup in my 1password app and am positive it is good is only being rejected because Macbook in now encrypted. All I want is my iPhone contacts. So I am de-encrypting my Macbook now. Kind of in a pickle when you loose the only copy of you resonal contacts. Can anyone help sort this mess out? My level of computer competence is really lacking.
    If they would just stop spying so much these things (encryptions, FileVault etc)  would not be nessaccary.

    The syncing is happening through the cell network not the wifi so it didn't help to turn off the router.  Here's what I ended up doing that finally worked:
    I restored the backup.  Before I could use the phone, it takes me through a few steps.  On the icloud step, I actually skipped it, so I didn't enter my password.  At that point the phone was usable again so I went to settings>icloud and turned off Contacts.  I double checked and my contacts were still on my phone.  THen I went to settings>icloud and entered my password and the turned contacts back on.  At that point it asked me if I wanted the contacts merged and I said yes.  A few minutes later my contacts were still on my phone and I checked my icloud account online and the contacts had been syced there as well.  Finally!  It worked!

Maybe you are looking for