Client based groupware integration

Hello,
we want to distribute the active x control for outlook via softwaredistribution, but we do not know how to fill the parameters as we do not know them.
Does anybody have some information according this topic.
Best Regards
Stephan

Digvijay,
the issue could as well be related to duplicate entries in Outlook. In this case the sync will fail because it does not know which version of a single record to update. Alternatively you might use OL 2007 and don´t have CDO installed. If the sync works when starting form the CRM UI the logon data (in the client settings under outlook) might be incorrect.
Bob,
as of today automatic sync is not supported. you can do this by creating a scheduled task under windows but every sync will stop until you confirm the Outlook security popup (lucky, who uses Notes in this case...)
This is a known requirement and on our future plan
Just let me know if this helps
cheers
martin

Similar Messages

  • Unable to activate Client Profile within Client-Based Groupware Integration

    Experts - Please help us!
    We are trying to activate a new Client Profile wiithin Client Based Groupware Integration. We are receiving an error message that 
    "Multiple profiles not allowed for same role, country, language combination."
    We believe we are receiving this message because there was an incomplete profile already saved in this table. We can not move forward without completing that record, however it is not editable for us.
    Has anyone run into this problem before? Any ideas how we can move forward? I would appreciate any information anyone is able to provide.
    Thank you!
    Jami Shircel

    I have one idea If you want to do this for your future records then you should create a specific transaction type meant only for GWI and assign it to groupware spro settings and that transaction type should not be used from SAP CRM WebUI. In this way all the appointment/task created in Outlook have that special TType and can be differentiated from others. Will that be of any use ?
    Rgds,
    Shobhit

  • Client Based Groupware Integration, task transfer problem

    Hi,
    I am using client based groupware integration on our 7.0 CRM system. But when I synchronize with outlook, owner of outlook task is not maintained on the CRM task document. On the CRM task, owner partner function is '00000022'. Which partner determination procedure I should use? And which access sequence is the true one?
    Thanks.

    Hi Manfred,
    we struggle with the same topic. First of all we implemented GW Version 8.013, which brought some positive results - compared to 8.010
    Still we weren't able to to assign the GWI profile to our business role (we assigned the role, but didn't get the expected results)
    Please keep me informed, whether you succeed.
    Regards,
    Jürgen

  • CRM Outlook client based groupware integration

    Hello ,
    I am trying to set up client based integration between CRM and outlook ,
    I've installed groupware integration software on my computer , I defined necessary settings in CRM calendar properties in Outlook.
    Once I am trying to start synchronization ( from CRM side) I got error message :
    "The current version of software components installed on your PC(3.039) us lower that minimally required one (3.040).Would you like to update it now?"
    I press "yes"  and go through update installation wizard. Once completed I press "Synchronize" again" and I get the same error message.
    Thank you for your response,
    Rika

    Hello,
    The problem is that when you say "yes" to upgrade you would expect the system to download the newest version from the internet. Unfortunately this is not correct, the system just grabs the file from the CRM server itself. In other words, if you don't download the newest version from the internet and upload it to the CRM server it won't work.
    Check OSS note 1311110 how to put the newest sync version on the CRM server. After this you can redo the actions you described previously.
    Hope this helps,
    Kind regards,
    Joost

  • Contact Synchronization - Client-Based Groupware Integration - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi Shobhit,
    Thanks for you help.
    I have the Active X settings how you say.
    I'm using Lotus Notes 8.5
    I checked the customizing, and we have the Settings for Client-Based Synchronization
    DEFAULT_APPT_PROC_TYPE = Z000
    DEFAULT_APPT_TEXTTYPE = A002
    The transaction type Z000 is a copy the 0000.
    When I create a activity in SAP CRM and press the  synchronization button, the system creates a activity at the lotus notes. But when I create a activity in lotus notes, the system doesn't create the activity at the SAP CRM.
    Best regards,

  • Client-based groupware integration - how to recognize inital system

    Our sales stuff creates new appointments in both, in CRM calendar - if they are able to be online and in their Outlook calendar if they are offline. With the synchronizing process both calendars will be adjusted.
    Due to some problems we have with the synch procedure, it would be very helpful to know if an appoint ment was initially created within CRM or within Outlook calendar. After synchronization the complete information is available on both sides and so within the appointment the intial system is not recognizable.
    Is there any place (table, log file) where I can identify the source system for specific appointments?
    Currently we have installed groupware client version 10.29.05 on our notebooks.

    I have one idea If you want to do this for your future records then you should create a specific transaction type meant only for GWI and assign it to groupware spro settings and that transaction type should not be used from SAP CRM WebUI. In this way all the appointment/task created in Outlook have that special TType and can be differentiated from others. Will that be of any use ?
    Rgds,
    Shobhit

  • Client-based groupware appointment / task Notes not syncronized to Outlook

    The Notes in appointments and tasks don't sync from CRM 7 to Outlook 2007 but all else does? The Notes are configured to use the Log Text Type and we need them to syncronize.

    Check under spro>crm>crm middleware and related components>client-based groupware integration>Settings for Client-based Synchronization if you set proper text id:
    - Text type for the appointment notes(DEFAULT_APPT_TEXTTYPE) 
    - Text type for the task notes(DEFAULT_TASK_TEXTTYPE)
    Regards.

  • Client based groupware : installation via SMS / required registry settings?

    hi,
    we'd like to install the CRM client based groupware syncronisation software (MS Outlook 2003 plugin) via SMS (Systems Management Server from Microsoft).
    I could not find any documentation which registry settings we have to / could send with the installation. Does anybody have some experience with it or a documentation available?
    GWI Version 3.043.
    Thanks!
    Roland Jungnickel

    Hello Roland,
    I was wondering if you ever found some documentation about this.
    I have searched sap.help, SDN and OSS without any success.
    I would appreciate any information you may have found on silent installations and the needed registry settings.
    Thank you. Have a great day.
    Carolyn Henry

  • Comparison of the Different Groupware Integration Technologies - Server-Based Groupware Integration - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi Hannes,
    thank you for your reply.
    You mean the transaction SMICM, or? Yes, I checked the https configuration, but I didn't change anything.
    The documentation said that following things should be checked:
    -Misc section: In our case it was correct (it the name of the application server)
    -Services: that' our settings:
    icm/server_port_0     = PROT=HTTP,PORT=8000,TIMEOUT=900
    icm/server_port_1     = PROT=SMTP,PORT=0
    icm/server_port_2     = PROT=HTTPS,PORT=443,TIMEOUT=900
    I didn't change there anything.
    I can tell you what I have done until now:
    1) note: I implemented the note which you said and all which depend on 1443469 the note (1417047, 1422365, 1423114, 1437152, 1446757, 446757).
    Now we have the synchronization version 8.024.
    2) Our software team checked the latest patches of MS Outlook
    3) I created two sites: MS-Exchange Server & SBDocs Groupeware Customizing in Tx smoeac
    4) I created a new Client GWI profile and activated this profile.
    Best regards, Jasmin

  • Difference server base client base groupware in crm ?

    Hello experts,
    what is the difference between client base <> server base groupware integration in crm ?
    I've added the add-on for outlook and I think this the cleint base gwi. But
    what about the server base ?
    Can anybody explain the scenarios ?
    What of them is more used ?
    Thanks Gerd

    Hello Gerd,
    we at KASTO use the client based groupware integration.
    The reason was that it is only very little customizing plus installation of an outlook plugin.
    That´s it and it works perfectly to synchronise appointments and contact persons from CRM to MS Outlook.
    We do not synchronise anything from MS Outlook to CRM.
    Kind regards
    Manfred

  • Qusetion: client-based synchronization from CRM to lotus-notes

    hi, expert
    there's a requirement to configure the activity of client-based synchronization from CRM to lotus-notes.
    I can only find the path to "client-based synchronization" in IMG,but I have no idea about how to implement the activity
    synchronization. I don't know the steps or conditions both in CRM activity management configuration and lotus-notes
    configuration.
    Could anybody help and guide me?
    sincerely Claud

    do the following steps:
    1. create transaction type for activity in spro>crm>transactions>basic settings>define transaction types
    2. define synchronization settings under spro>crm>crm middleware and related components>client-based groupware integratuion>settings for client-based synchronization. here define values for:
    - Default process type for new tasks(DEFAULT_TASK_PROC_TYPE)  
    - Text type for the task notes(DEFAULT_TASK_TEXTTYPE) 
    - Status code for the Status "Open"(DEFAULT_TASK_OPEN)  
    - Status code for the Status "In process"(DEFAULT_TASK_INPROCESS)  
    - Status code for the Status "Completed"(DEFAULT_TASK_COMPLETED)  
    - Status code for the Status "Cancelled"(DEFAULT_TASK_CANCELLED)  
    3. go to spro>crm>basic settings>one-to one e-mail>Define Multipart E-Mail Option and Groupware Integration - here define lotus notes
    4. instal groupware integration component - in personalization of web ui
    5. edit synchronization settings - in personalization of web ui
    Regards.

  • Client based GWI - "Contact Person Sync settings"

    Dear CRM guru's,
        We are using CRM 2007 SP 2 and client based Groupware synchronization. The application version of the GWI synchronization is 3.035. In Outlook "SAP CRM Calendar synchronization settings">sync tab>"Contact person Sync settings" section, I see 2 check boxes for "Contacts of accounts where user belongs to account team" and "Delete account on contact deletions when no other contact exists". Can you please tell me what is the significance of these 2 check boxes. Is there a way I can default these 2 checkboxes, disable them distribute to the users and  make the end user not able to change these 2 check box selections. Appreciate your help here.
    P.S : I believe these options were not there in the previous version 3.027. Can I use the 3.027 application with CRM 2007 SP2 for GWI synchronization?
    Thanks!
    Vivek.

    Hi,
    There is a way to do it, but you need to migrate to latest groupware integration version 8.014,. There all properties in client are combined in a form of profile, which can be automatically downloaded to each client.
    It also automatically detect that if there is any new version of update in profile,and download the latest.
    If you do not want to upgrade, you can check which registry field is controlling the UI for those 2 properties, which you can set or reset.
    You can see all properties at location "HKEY_CURRENT_USER\Software\SAP\CRMCalIntegration\SyncSettings"
    And export the desired reg file to end user.
    Best Regards
    Ashish Rawat

  • MS Outlook Groupware integration with CRM - issue

    Hi Gurus,
    Please help me on the below explained problem.
    We implemented MS Outlook groupware integration in CRM for activities synchronization from CRM to MS Outlook and vise versa and the synchronization is working fine for all accounts excepting one account, the activities synchronization is not happening from CRM to Outlook for one account.
    Please let me know know what could be the issue with this account or any customization settings missing or anything should be changed in account master data.
    Please do needful
    Thanks and Regards,
    Venkatesh

    Hi Venkatesh,
    I assume that you are using client side groupware integration.  I could think of following possibilities with that account -
    1. That account might be deleted/achieved/blocked
    2.  Incomplete sales area data (if not a prospect)
    Another way to check (I am sure you would have already done this) is that compare the problem account with the other account for which synchronization is happening correctly.  May be you can check each tab from CRM GUI or each assignment block from CRM WEB UI.
    Hope this will be useful.
    Thanks and Regards
    DJ

  • Error during Groupware Integration(Client)

    Hi All,
    We hv setup CRM 2007web based interface. we hv installed groupware integration client for integration between CRM 6.0 and outlook. Appointment from crm is getting synchronise to outlook however appointment and taskfrom outlook not getting synchronize to crm 6.0
    Any help?????
    Thanx
    Chinmaya

    Chinamaya,
    I know this is not an answer to your question, but I am looking for the current Groupware Connector download. Do you know where I might be able to find it?
    The version that is posted on Service Marketplace for our CRM 5.2 version is old, because it is required SOAP 2.0 toolkit (which is very old and practically obsolete).  Any help you can offer would be appreciated.
    thankyou!
    John

  • Questions relating to Groupware Integration (Outlook)

    Hello,
    I have few questions relating to groupware integration for Outlook:
    Q1) The "Relate to CRM" option in outlook add-in for end user is available only  in client side integration? Is it not available for server sider integration (i.e. in server side, end user cannot directly assign CRM account or Transaction to object in outlook the way it is done in client side)?
    Q2) Is there any end user interface (like add-on) available in server side?
    Q3)In client side - Can the outlook add-on for SAPCRM be enhanced for different business logic or look n feel?
    Thanks,
    Vicky

    Hello Vicky,
    1) Yes the Relate to SAP CRM function is part of Client-side groupware only.
    2) The Add-in is only available with Client-side groupware.
    3) The Add-in cannot be customized. However the results can be influenced by parameters in transaction GWIPROFILE.
    The information displayed in the Business information Pane can be changed.
    Best Regards,
    Gervase Auden

Maybe you are looking for