Client can not communicate with MP over https. Certification Problem

Hi All,
I have been fighting with this problem for the last 3 days and couldn't solve yet. So, I hope we can solve it here.
I am trying to install client manually from a usb drive by using the below command.
Ccmsetup.exe /usepkicert smsmp=”srvsccm2012.domain.local” ccmhostname=”sccm.domain.tr” smssitecode=”AUTO”
Client Installs on workstations but only info that I can see under Configuration Manager Properties are:
Client Certificate: None
Connection Type: Currently Intranet
Version:5.00.x.x
So, there is a problem with connection to MP, It can not get policies and certificate info (PKI) etc...
If I try to browse these urls, result is 403 - Forbidden: Acces is denied.
http://siteservername/SMS_MP/.sms_aut?MPCert<o:p></o:p>
http://siteservername/SMS_MP/.sms_aut?MPlist<o:p></o:p>
This makes me think certificates are messed up but if I try to browse my MP with the url below, Result is IIS 8 page.
https://sccmserver.domain.local
I can see these errors in my log files:
CcmMessaging Log errors:
Post to http://”myservername.mydomain”/ccm_system/request failed with 0x87d00231.
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7.
ClientIDManagerStartup Log errors:
RegTask: Failed to refresh site code. Error: 0x8000ffff
LocationServices Log errors:
Failed to retrieve DNS service record using _mssms_mp_”auto”._tcp.mydomain lookup. DNS returned error 9003
Policy prevents failover to WINS for lookup
LocationServices 8/26/2014 4:18:29 PM
3900 (0x0F3C)
LSGetSiteVersionFromAD : Failed to retrieve version for the site '”AUTO”' (0x80004005)
The ip address of workstation on DNS is correct.
I can ping and resolve the name of MP from workstation.
I want to check if my certificates are OK but I dont know how to make sure certificates are good. Please advise.
By the way, This problem is happening on the newly reformatted workstation, existing workstations can be re-installed with client without problems.
Yavuz Selim Atmaca

Hi Peter,
I checked IIS Logs and I didn't see any error messages.
I checked the certificate requirements and I think there is no problem with them.
certutil -verify -urlfetch command outputs some results that I couldnt understand. Here it is:
ssuer:
CN=mydomain-SRVDC01-CA
DC=mydomain
DC=edu
DC=local
Subject:
EMPTY (DNS Name=selimtestPC.mydomain.edu.local)
Cert Serial Number: 29e6fe37000000005edb
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwRevocationFreshnessTime: 7 Hours, 33 Minutes, 49 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwRevocationFreshnessTime: 7 Hours, 33 Minutes, 49 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
NotBefore: 26.08.2014 14:19
NotAfter: 26.08.2016 14:29
Subject:
Serial: 29e6fe37000000005edb
SubjectAltName: DNS Name=selimtestPC.mydomain.edu.local
Template: ConfigMgr Client Certificate
74 cf 94 a4 5d 72 0f e9 19 d1 36 b4 5c 06 4e 55 12 04 89 26
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=AIA,CN=Public%20Key%20Services,CN=Servi
ces,CN=Configuration,DC=mydomain,DC=edu,DC=local?cACertificate?base?objectClass=cer
tificationAuthority
---------------- Certificate CDP ----------------
Verified "Base CRL (057a)" Time: 0
[0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?certificateRevocationLi
st?base?objectClass=cRLDistributionPoint
Verified "Delta CRL (057a)" Time: 0
[0.0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Serv
ices,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?b
ase?objectClass=cRLDistributionPoint
Verified "Delta CRL (057a)" Time: 5
[0.0.1] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
Verified "Base CRL (057a)" Time: 4
[1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA.crl
Verified "Delta CRL (057a)" Time: 0
[1.0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Serv
ices,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?b
ase?objectClass=cRLDistributionPoint
Verified "Delta CRL (057a)" Time: 4
[1.0.1] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
---------------- Base CRL CDP ----------------
OK "Delta CRL (057e)" Time: 0
[0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?bas
e?objectClass=cRLDistributionPoint
OK "Delta CRL (057e)" Time: 4
[1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 057a:
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
a4 81 a4 bb 01 7e e1 be e2 33 4b 06 5d 00 3c 30 97 93 27 f6
Delta CRL 057e:
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
52 c5 95 b3 9d c2 9d 22 ee fa 3b c4 b9 04 08 3e 95 98 1d 5c
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
CertContext[0][1]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
NotBefore: 22.10.2010 16:50
NotAfter: 22.10.2025 17:00
Subject: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
Serial: 49c50a78f367cdb8466cd34160977233
Template: CA
01 a8 da 41 35 f7 52 be 7a 9b 4d 26 3d ee 33 af c4 e0 9c e0
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
No URLs "None" Time: 0
---------------- Certificate CDP ----------------
No URLs "None" Time: 0
---------------- Base CRL CDP ----------------
OK "Delta CRL (057e)" Time: 0
[0.0] ldap:///CN=mydomain-SRVDC01-CA,CN=SRVDC01,CN=CDP,CN=Public%20Key%20Servic
es,CN=Services,CN=Configuration,DC=mydomain,DC=edu,DC=local?deltaRevocationList?bas
e?objectClass=cRLDistributionPoint
OK "Delta CRL (057e)" Time: 4
[1.0] http://srvdc01.mydomain.edu.local/CertEnroll/mydomain-SRVDC01-CA+.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 057a:
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
a4 81 a4 bb 01 7e e1 be e2 33 4b 06 5d 00 3c 30 97 93 27 f6
Delta CRL 057e:
Issuer: CN=mydomain-SRVDC01-CA, DC=mydomain, DC=edu, DC=local
52 c5 95 b3 9d c2 9d 22 ee fa 3b c4 b9 04 08 3e 95 98 1d 5c
Exclude leaf cert:
58 db 23 c9 81 00 ff 3e de e0 13 da 87 29 66 96 56 45 51 cd
Full chain:
ba 55 5a 92 f0 b4 69 47 01 d7 02 23 1c db 7e 88 66 f2 42 dc
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
CertUtil: -verify command completed successfully.
I just checked SCCM SystemStatus/ Component Status from the SCCM Console and found errors under SMS_MP_CONTROL_MANAGER
component:
"MP has rejected a message from GUID:A90AA88F-FB10-407C-B2ED-DCE41479FBDC because the signature could not be validated. If this is a valid client, it will attempt to re-register automatically so its signature can be correctly validated."
Should I delete all config manager related certificates and re-create them?
Yavuz Selim Atmaca

Similar Messages

HT4890 i get a message that my mac can not communicate with my iCloud why???

I get a message that my mac can not comunicate with my icloud why?

Welcome to the Apple Community.
What are you doing when this occurs and what does the message say.

Agenda can not communicate with Exchange server

Hello,
Whenever I start my agenda app on my MBP, I get the message: Agenda can not store the agenda <name> on the Exchange server. I use Office 365's Exchange server. When I use Outlook to communicate with te same Exchange server, there is no problem, but I like to use the native Apple Agenda app.
Anybody got the same problem, and more important, the solution?

Justin, I don't know if this will help but I do remember running into this in the past.
I ended up setting up my mail using our webmail server. Also instead of using my email address I used my login credential in front of the @. Our login credential is not the same as our email. So instead of [email protected] I went with [email protected] and used my password for password at setup of an exchange account. This worked like a charm.

I can not communicate with the FP-1000, using the serial port.

FP-100 communication by serial port.
My problem is the communication with the interface FP-1000, I haven been using it for two month with my program application and suddenly it stopped to work. I tried to use the FieldPoint Explorer to communicate using its last configuration but it does not work. I have tried to configure again and the FieldPoint Explorer doe not find any module, also I have seen that the network and access LEDs don lit when I am trying to communicate with the FP-1000.
I have checked all connection and they are already, the FP-1000 turn on, and the status LEDs does not lit.
I guess the trouble is the RS-323 connector at the FP-1000.
Could you tell how can I solve this problem?

Hello,
There are a number of things that you can try when you are experiencing communication problems with a FP-1000.
First, double-check that the serial port that you are using is the same one that you are specifying in FieldPoint Explorer. Try using another serial port on the host computer. Try connecting the FP-1000 to another computer.
Make sure that you have FieldPoint Explorer version 3.0.2 or later. Free upgrades are available from the web.
I hope this helps,
Chad Evans

Why my TDS2014B scope can not communicate with signalexpress

I have already installed LabView 2014,Signal express and VISA 4.6.
Now i want my TDS2014 scope communicate with Signal Express,
of course,I haved installed TDS2014's driver,it's a zip file,and extracted directly to the \instr.lib directory.
but when i Create New IVI Session，I found anything in instrument driver box,while Resource Descriptor can be selected as my "usb USB0::0x0699:....."
what should I do ?any suggestions?
PLEASE help and contact me,thanks.

Thanks Dennis.
I made it.You are right,I installed the wrong driver,but now new problems occured.When i clik run,erro shows "Primary Error: (Hex 0xBFFA0010) Invalid value for parameter or property.
Secondary Error: (Hex 0xBFFC0004) Parameter 4 out of range, or error occurred while setting Parameter 4.
Elaboration: Max Input Frequency"
AM I havn't configured the parameter yet?I tried to set IVI configuration in Measurement & Automation Explore,but it still can't work.

MQ 2 FILE scenrio - can not communicate with communication channel

hello
trying to run MQ 2 file and the file is in the MQ and the communication channel of the sender write me in the RWB this message
XI inbound processing failed for message at 2008-04-15. JMS and XI identfers for message are ID:.......
JMS adapter will rollback database and JMS session tranactions.
does any one know what is the problem with the Queue? why does the sender does not recieve the message and I dont see it in SXMB moni?

Seube wrote:
mmm it seems I spoke too quickly, things seems to work as expected now. I don't know what I did change since.
I've retested between two cards: it seems also ok except 2 strange things:
- when CAN2 is physically connected on PC2, it seems CAN1 that listens instead (as if CAN1 was connected)
- trames sent from CAN0 and CAN1 on PC1 seems to be repeated from IXXAT card: they are returning respectively on CAN1 and CAN0.
Sorry, no idea on these two. As for the first one, what happens if you connect CAN1 to CAN2 on PC2 (no connetion to PC1)? I don't know anything about the IXXAT card. Is there some switch that internally bridges the two ports?

I forget security questions , and i did everything while its nothing came to my inbox. also i can not communicate with apple support coz im saudi and i dont have american number .what i have to do ?!

security QUESTIONS

If you aren't receiving the email to your rescue email account (and you've checked the spam folder on that account as well as the inbox, and tried clicking the reset link again) then you will need to contact Support in your country to get the questions reset (you would only need to contact US support if you were in the US and therefore had a US iTunes account).
Contacting Apple about account security : http://support.apple.com/kb/HT5699#S
Saudi Arabia
(44) 0844 209 0611***
www.apple.com/sa/support/
*** £0.05p per minute when dialed from a landline within the UK. Call charges may vary when calling from a mobile phone.
It's an international call here to the UK

The crawler could not communicate with the server.

valmiki

Hi,
According to your post, my understanding is that you get an error when communicating to the server.
1. This happens when crawler is not able to connect to the server. Make sure server name is correct and your crawl account should have the Full Read permission on the User Policy at the Web Application level. It should not have any specific
permission on any site collection.
Couple of steps to troubleshoot it:
a. You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
      Ping <servername>
b. You should be able to connect to the server using telnet command
      Telnet< servername> <port number>
https://social.technet.microsoft.com/Forums/en-US/01b6cdda-ca38-46c1-be07-2e89eb91271f/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointsearchprevious
2. Can you browse to the WebApp from the server that is performing the Crawl? The issue is usually the most typical is the LoopBackCheck.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.
Quit Registry Editor, and then restart the IISAdmin service.
https://social.technet.microsoft.com/Forums/en-US/f378c45f-fa8b-48f3-88bb-739f3cd27830/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
3. Checked WinProxy to see configured proxy:
       C:\Windows\system32>NetSH WinHTTP Show Proxy
       Run NetSH WinHTTP Reset Proxy
       Restart server and test again.
https://social.technet.microsoft.com/Forums/en-US/1baa6fd5-acc7-4cda-b7cb-7fa86aa8101f/the-crawler-could-not-communicate-with-the-server?forum=sharepointsearchprevious
4. The web.config file of the crawled web application contains an error.
       The target site collection contains a web part error for instance on the default.aspx.
       Also check the solution are not deployed correctly.Central Administration -> Solution Management (Manage Farm Solutions).
https://sharepointsriram.wordpress.com/2011/12/10/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
If the issue still exists, you can try to delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
For more information about this similar issue, you can refer to:
http://sharepointroot.com/2012/03/16/sharepoint-search-the-crawler-could-not-communicate-with-the-server/
http://www.sharepointed.com/2013/08/13/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
http://www.information-worker.nl/2011/01/11/the-crawler-could-not-communicate-with-the-server/
https://social.technet.microsoft.com/Forums/en-US/0e7ffd07-c584-4767-a2bc-ce3a014255c6/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
Best Regards,
Yumi Fu

Can not print with networked brother printer on my iMac

I am not sure why but both of my printers on my wired network computers can not communicate with me any longer.
Any suggestions?

I have a very similar situation. Only the hardware changes.
•Brother fax2820 attachced to the iMacG4 via USB which it wired to Linksys wireless router.
•MacBook built-in airport connected to LAN via Linksys wireless router.
Same symptoms - I can find and install the shared usb printer but it won't print.
Can't, of course, use your solution - Linksys router doesn't have a usb port.
So, what next?

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???

first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you..

IChat can't communicate with my AIM account

Hi, every time i try go to to my ichat it automatically logs me out, and when i try to log back in, it says "iChat can't communicate with the AIM account 'aforever0203' and The AIM server has temporarily limited your account due to too much activity. Try again in a few minutes" This has been happening for days, please help!

HI,
Go here https://settings.aim.com/
Can you sign in there ?
This will not work for newer @me.com and @icloud.com IDs issued under iCloud ( I notice there are at least 2 Me Toos clicked)
With Apple IDs there have been issues over the last few months about accounts getting Suspended when people have travelled to foreign lands.
The "normal" fix with AIM names is to Change the Password but obviously changing the Apple Passwords cannot be seen by AIM.
In that case you need This link about Suspended accounts and you need to use the TOS General email address.
(You need to explain very carefully that you have an Apple ID and that AIM cannot see any Password Change and that they will have to reset the account manually - some support staff seem not to know that Apple have an agreement that Apple IDs are also AIM Valid Names)
If it is a plain AIM name a Password reset should correct the issue.
11:09 PM Saturday; January 12, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't communicate with Airport Express after WIN upgrade?

I upgraded to Windows7-64 from XP and my itunes will not communicate with my airport express. I get a green light on the unit and on AP Utility. Back on iTunes, on the multiple speaker drop down list, the name of my APEx device is displayed with a checkmark but there is a lock symbol over an exclamation mark in a triangle.. Please help.
Ron

Hello Anderron,
I'd suggest taking a look through the following article for a host of useful troubleshooting steps that can help get AirPlay working.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

Outlook 2013 can't communicate with Exchange 2013

we're just finishing migration to Exchange 2013 and found some Outlook 2013 clients (migrated from Exchange 2010) can't communicate with Exchange 2013. even if i recreate the Outlook profile.
what worked is to reinstall Office 2013. just want to get ideas why a reinstall fixed the problem.
same outlook proxy is there in the account settings.

Hi,
What was the symptom that Outlook couldn't communicate with Exchange 2013? Could you please detail this a bit?
If the Account Settings are completely same before and after the reinstallation, we can say the cause is not on the Exchange side. While I can't guarantee the root cause based
on the provided information. A reinstallation fixes the corrupted or missing components/files in Office, but it's hard to say what has been fixed during the reinstallation.
If you still have some Office 2013 clients that have not been reinstalled, try to run Microsoft Office Configuration Analyzer Tool to quickly identify problematic configurations in Outlook:
https://www.microsoft.com/en-us/download/details.aspx?id=36852
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here.

IChat can't communicate with the Aim account

Recently, my iChat AV stopped working, displaying a message iChat can't communicate with the Aim account "xxxxxxxxx". None Time
I have been able to successfully log on with other accounts using the application.
I have tried the 443 port switch and the firewall technique.
This problem may coincide with my use of an aim importer client on facebook
I have since severed all ties between the aim account and the facebook account
I have tried using Adium and aim express but to no avail.
Aim express consistently displays the message saying that I have attempted to log on too many times and to try again, even after I restart the computer and wait half an hour.
Any help would be much appreciated.
Thanks

Hi,
Welcome to the  Discussions
Umm, Sounds like an issue created by trying to unhook Facebook from AIM.
Try filling in this page and see if it helps
http://www.aim.com/suspended_account/report.adp
You will not get a reply and it may still take a day or two.
10:20 PM Thursday; September 16, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

IChat can't communicate with AIM account

iChat can't communicate with AIM account - I've looked at ALL threads and no success to troubleshooting
Looked into this: https://discussions.apple.com/thread/3558055?tstart=0
I've tried changing my Port number - FAIL
I tried restarting and deleting account - FAIL
Tried creating a new account - FAIL, says there's an error
Tried going through Go > Finder > Library > Preferences to delete the com.apple.ichat.AIM.plist - FAIL, couldn't find in the folder either
Tried going through keychains and permissions - FAIL
I've had the same account for over 13 years (maybe that's why, ha!) and I did nothing to change any settings. Please help! Work depends on it!

Hi,
If it is an AIM name (i.e. Registered at AIM) then there seems to be a rush of Suspended Accounts recently.
Some have found that touring abroad seems to be the latest reason.
You then need to go to the Suspended Account Help Page and use the TOS General Email link.
If you have an @Mac.com name that is of course a Valid AIM Screen Name as well as an Apple ID means that the password has to be changed at Apple.
However the AIM server cannot tell that this has been done.
One person reported recently that the person they contacted via the TOSGeneral email link did not seem to know about the agreement with Apple that AIM has and that they had to change the "Flagging" on the account at their end.
Although a "Hacking" of an AIM account is not unheard of it is rare.
The TOS General link is still the best route I know of on that score.
9:30 PM Wednesday; August 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Client can not communicate with MP over https. Certification Problem

Similar Messages

Maybe you are looking for