Client copies for XI and BI Netweaver 4s
I'm in the process of building our development ECC 6.0 environment. The environment contains BI, XI, EP, ERP and Solution Manager each on seperate physical systems. We are building an ABAP and Java stack on BI, XI, ERP and solution manager. Our SAP consultants are informing me that the initial installation of client 001 (which is a copy of client 000) is configured during the installation on XI and BI systems. Creating a new client has no value and requires most of the configuration to be redone. Since both systems can only use one client, is there any value in performing this client copy other than standardizing the client numbers?
Hi Lee,
You can do a client copy and create a specific client for the PI (formerly XI) and BI capabilities or just use client 001 for both.
Obviously the latter option is the easiest one.
The only benefit is that security might be easier with a separate client for each but that is a pretty weak argument in my opinion.
BTW: You can't share a client for PI/BI with an ERP client.
Cheers,
Mike.
Similar Messages
-
CUVDesktop Client requiremnts for MAC and PC?
Hi
something one else know how client requeriments for MAC and PC for installing CUVDestop need it?
Thanks for your cooperation
Best RegardsIf you mean CUVA review these docs
Release Notes for Cisco Unified Video Advantage, Release 2.2
http://www.cisco.com/en/US/partner/docs/video/cuva/2_2/english/release/notes/relnote_cuva22.html
Release Notes for Cisco Unified Video Advantage, Release 2.1(1) and 2.1(2)
http://www.cisco.com/en/US/partner/docs/video/cuva/2_1/english/release/notes/ol15290.html
We do not support CUVA on MAC.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk -
COPA for Royalties and commissions
Hi All,
At the client, we pay royalties & commission based on the merchandize we sell and we calculate the margins based on the same. When a sales order gets raised... depending upon the shipment/fulfillment of the order the invoice gets raised and as per the invoice the royalties & commission need to be calculated. That reflects the exact amount on balance sheet. i was checking the COPA extractor tables (CE1, CE2, CE3, CE4... Considering the issue i certainly can not use COPA for royalties & commission reporting, as royalties & commission is calculated based on sales order and NOT whether the order is fulfilled/partially filled/never executed etc.. What is the solution to this ? How do i get commissions and royalties only when the invoice is raised and not when Sales order is created.
Thanks,
SyedHi, you will normally let royalties and commissions be handled by SD. In SD they have some nice features for controlling these things incl. settlement, prepayments, calculations of the exact amount to be transferred to CO-PA!
The calculation of royalties and commissions should be handled by the SD priceschema where you assign all kind of fields, amounts, numbers etc. And if that is not enough can they use TA VOFM to create the calculation you need!
Depending on its a make-to-stock scenario will the figures be transferred to CO-PA on the billing time (invoice) or in or made-to-order scenarios when the production orders/sales orders are settled.
What is left in CO-PA is to assign the values to relevant CO-PA values fields so the bottom-line is; its possible to report royalties and commissions in CO-PA (you might need to make a report in reportpainter).
Have in mind that the main setup of royalties and commissions are to be found in the SD setup of rebates!
Regards
René Vestergaard Nielsen -
Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSPHi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Client Certification for Sender SOAP Adapter
I am trying to configure an incoming SOAP call to allow client certification for autentication and not ask for username/pwd. I already tried changing the configuration of the SOAP adater in visual admin to have the client certification module with no luck.
Please let me know if anyone has already done this before.Hi,
Check the link for Client Certificate authentication...
[http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf]
Regards,
Prakasu.M -
Hi Experts ,
Can anyone tell me the difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft ?
Best Regards,
SKSAP Netweaver Gateway 2.0 is a product for Exposing ERP data as OData for external consumption which is independent of any Microsoft product. Using this you can model OData services and Expose them for light weight consumption. You can use this in use cases where you just want to consume the OData in some client or so, and you do not want any kind of accelerators to help you in development or in your integration.
GWPAM is an interoperability framework from SAP that leverages SAP NetWeaver Gateway and Microsoft technologies enabling customers and partners to easily and quickly compose solutions that consume and extend SAP throughout Microsoft technologies for on premise and on demand deployment. With GWPAM you get components like
GWPAM Visual Studio Add-On,GWPAM Template,GWPAM Project,GWPAM Outlook Add-In which are very much Microsoft specific. -
COPA Datasource creation and Masterdata loading for characteristics
HI,
I am creating a Costing based COPA datasource for client requirement.
There are fileds from
Characteristics from the segment level:
Currency type PALEDGER
Fiscal Year GJAHR
Period/year PERIO
Plan/Act. Indicator PLIKZ
Record Type VRGAR
Version VERSI
*Characteristics from the segment table:
Company Code BUKRS
Billing Type FKART
Brand KMBRND
Brand EXTWG
Business Area GSBER
CO Area KOKRS
Category WW010
Country LAND1
Customer KNDNR
Customer group KDGRP
Distr. Channel VTWEG
Division SPART
Material Group MATKL
Not Used-Level4 WW040
Plant WERKS
Prod.hierarchy PRODH
Product ARTNR
Product hierarchy WW050
Profit Center PRCTR
Sales Group KMVKGR
Sales Office KMVKBU
Sales Ord. Item KDPOS
Sales Order KAUFN
Sales Org. VKORG
Sales district BZIRK
Sales employee KMVTNR
Sub Group WW020
Sub Sub Group WW030
Vol. rebate grp BONUS
Characteristics from the line items:
Record Currency REC_WAERS
Billing Date FADAT
Canceled doc. STO_BELNR
Canceled item STO_POSNR
Cost Element KSTAR
Cost Object KSTRG
Document number BELNR
Goods Issue WADAT
Item number POSNR
Order RKAUFNR
Partner PC PPRCTR
Posting date BUDAT
Ref.doc.number RBELN
Reference item RPOSN
Sender BProc PRZNR
Sender cost ctr SKOST
WBS Element PSPNR
Value fields:
Administration Costs KWGOHD
Bonuses KWBONI
Customer Discount KWKDRB
Direct mat. costs KWMAEK
FOB Charges VV020
Freight KWFRGR
Gross sales KWBRUM
Insurance KWINSR
Miscellaneous chargs VV030
Other Charges VV010
Other Discounts RABAT
Other overhead KWSGEK
PAL/Packing charges VV040
Revenue ERLOS
Sales costs KWSOHD
Sales quantity ABSMG
Stock Value VRPRS
Calculated Key Figures from the Key Figure Scheme:
Sales unit COPASLQTU
Sales quantity COPASLQTY
Revenue COPAREVEN
Cust. discnt COPACDSCN
Base on the above characteristic fields how can i consider the infoobjects from BW to laod masterdata.
Do i need to consider the base tables for characteristics and for value fileds apart from CE1XXX,CE2XX,CE3XXX,CE4XXX tables.
Please give me your ideas on this.
Thanks,
SatyaHi Durgesh,
Thanks for your response,
Data is coming perfectly in RSA3 for COPA datasource.
There is a confusion while reconciling the data with ECC system.(transaction KE24).
Functional consultant has reconcile one transaction with a reference document number and with certain currency type(Company code currency/Operating concern currency).
But still i confuse with the Masterdata Loading.
Because masterdata attribute fileds are taking directly from the operating concern in COPA which is normally won't happen with the other scenario.
(Say for CUSTOMER attribute are CUSTOMER GROUP and COUNTRY, In COPA scenario these are directly available in operating concern which will be available for datasource.But for other scenarios for CUSTOMER GROUP and COUNTRY fill with the CUSTOMER attributes hence my idea is whether we need to load masterdata in BI or not.)
Please give your valuable o/p.
Thanks,
Satya -
Client Copies and Currency Changes
Hi All,
Looking for some experience with client copies and currency changes. We have a source system that was created with EUR as the system currency (SCC4 setting). We are building a new system with an export of the source system. The target system will be USD (or one of several other currencies). The question is how do you resolve the currency differences? Is it possible to create a new client from a source client of a different currency? (i.e. SIDCLNT100 = EUR , SIDCLNT110 = USD). What type of conversion is needed and where in the process is it performed? Thoughts or comments on experience is greatly appreciated!!Hi Lee,
You can do a client copy and create a specific client for the PI (formerly XI) and BI capabilities or just use client 001 for both.
Obviously the latter option is the easiest one.
The only benefit is that security might be easier with a separate client for each but that is a pretty weak argument in my opinion.
BTW: You can't share a client for PI/BI with an ERP client.
Cheers,
Mike. -
Tutorial WebStart Clients and SAP Netweaver
I'm currently reading the Tutorial "WebStart Clients and SAP Netweaver" [<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/35a46378-0801-0010-a3b7-91595122de3d">link</a>] Within it is recommended to download the Zip File "TutWritingRMIClients.zip" - but I couldn't find it on sdn. Where can I find it or is there an newer tutorial with active links?
thx
MartinHi,
Maybe Johannes Hamel knows where to find it. But according to this (https://forums.sdn.sap.com/profile.jspa?userID=563619&start=0) , he isn't much active on SDN. Therefore I would suggest to send a mail to [email protected]
Eddy
PS. Reward the useful answers and you will get <a href="/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself! -
Print Multiple copies of report, and resetting Page number for each copy.
Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
IbrarHi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260> -
I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.
Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English. -
I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx -
I have the following on my local network.
Server DomainA -> Small Business server 2003/Exchange 2003
Server DomainB -> Windows 2008 R2/Exchange 2013
Clients Domain A -> Windows XP/Outlook 2003
Clients Domain B -> Windows 7/Outlook 2007/2010
Problem: I want clients from DomainA to log into Exchange on DomainB on the same local network.
I need to know how to setup the DNS on both domains and the certificates on the DomainB Exchange server
to accept the connection from the PC on domainA. All connections from clients on domainB to server on domainB
work correctly but when adding accounts to Outlook 2003/2007 on domainA clients I am getting certificate errors.
I have purchased certificates for mail.domainb.com and autodiscover.domainb.com but I dont know how to get
the clients on domainA to recognize those external URL's of the exchange server (with the certificates bound to them) from the internal network. Hence I get domain errors.
I am getting issues when a client on DomainA tries to add an Outlook mail profile to connect to the Exchange on DomainB
Any suggestions on how to set this up?
thanksDomain A & Domain B are two separate AD Forests?
Users in Domain A either need mailbox-enabled user accounts that are in DomainB or a linked mailbox in Domain B to utilise the Exchange Server in DomainB. In either case with the help of the autodiscover service user can use the services in ExchangeB.
If the client machines are member of domainA and you are trying to access ExchangeB you will then need to leverage a custom XML file for autodiscover and force the Outlook client to use this file.
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>redirectUrl</Action>
<RedirectUrl>https://autodiscover.domain.com/autodiscover/autodiscover.xml</RedirectUrl>
</Account>
</Response>
</Autodiscover>
Then you need to configure the client machine to query that XML file by adding the following registry key:
Refer to XML file
for Outlook 2007:
HKCU\Software\Microsoft\Office\12.0\Outlook\Autodiscover
for Outlook 2010:
HKCU\Software\Microsoft\Office\14.0\Outlook\Autodiscover
STRING_value <your_namespace> = path to XML file
you can find more information in the following link.
Controlling Outlook Autodiscover behavior
http://blogs.technet.com/b/kristinw/archive/2013/04/19/controlling-outlook-autodiscover-behavior.aspx
CK -
Hi there,
The Smooth Streaming Client SDK for Windows 8.1 at
https://visualstudiogallery.msdn.microsoft.com/0170c67c-c183-4fee-8dd4-c2b44d710d40 specifies "Offline playback scenarios via Downloader Plugin*". I have been searching the web to find info on how to download content for offline playback scenarios
using the Downloader Plugin, but can't find nothing, so is there any samples, API docs or blogs out there showing how to do this?
Sandip AhluwaliaHi Sandip,
As stated in the sample you linked:
For feedback and future requests please use IIS.net forum and related forum tread which can be accessed from
here
--Rob
Maybe you are looking for
-
TextEdit on a Small Screen?
Hi, I have been trying to use dictation. I can't use it in LibreOffice, due to old bugs and a new regression, but I can use it in TextEdit, and copy and paste. Unfortunately, TextEdit shows the text at about half size. If I try to zoom in, then TextE
-
What setting need in SAP R/3 if i want to send only changed records to XI
Hi All I had problem while sending Idoc from SAP R/3 to XI Thing is i want to send only the changed records in Idoc not all so what settings i need to in SAP R/3 ? Can any one explain me how to do this... Adv thanks and Points
-
ABAP Objects - Book(s)
Hi there, I am looking for a good book on ABAP Objects for a beginner in OOPS. Can you pls suggest a couple of good books? Appreciate your help. Thanks, Hitesh
-
MacBook Air will not power on or reboot. A file folder with a question mark in the center of it appears. What is the problem?
-
Change settings for external displays: no "mirror displays" mode
Hello, I'm using a 13" MBP with Snow Leopard. I'm using different displays and projectors in different locations. When you plug an external display in, the two displays are first in "mirror displays" mode. First thing I do is to switch this off. Is t