Client copy between PROD and QAS system

Hi!
We would like to copy a client from productive system to quality assurance system.
Questions:
1) What is the best procedure?
1a) export/import
1b) remote copy
2) Where can I find the appropriate documentation?
Thank you very much!

Hi,
I will suggest that you opt for export/import method.
Please find the link for more detail procedure.
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c824ba111d189750000e8322d00/content.htm
With Regards,
Saurabh

Similar Messages

Client Copy between unicode system and non-unicode system

Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
Alexander

Hi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal

Client Copy between Two Different Systems

Hi!!
Could someone please explain or provide any documentation which explains how to perform client copy between two r/3 systems of same version(ecc 6.0)
Thanks and Regards,
Vishwa.

Hi,
Save the contents that need to be copied in a Transport request at source client.
Now at the target client system,
execute transaction 'SCC1' and give the TR number and execute it.
The changes from the source client system this way will get copied to destination client system.
Reward if useful!
Thanks,
KalpanaR

Differences between client copy with sap_all and database copy

What's the difference between client copy with sap_all and doing a database copy.
I know if I do a database copy from Production to our Quality system.
I need to install the license key
restore the production library to the quality library
Initialize TMS and so on.
I know if I want to copy to our Development system. I would need to run either a remote client copy or and export/import since I cannot do a database copy because I would loose all my other clients in Development.
My question is, if the quality systems and the production systems are on the same support packs, same kernel.
What does a database copy give you (besides being faser) that a remote client copy or export/import of a client copy does.
Any differences
Thanks
Joe

Hello Joe,
If there is inconsistent Z tables between QAS and PRD, remote client copy could fail, especially when the table on PRD has longer length or more fields than the one on QAS.
Also the source client should has no-activity during the client copy, otherwise the application data could be inconsistent. For example, some material documents are copied, but not the corresponding financial documents. (For PRD client, it could be hours between the times those tables are copied.) For database restore, it is rarely an issue.
Best regards,
Victor

Logical system on QAS after remote client copy from PRD to QAS

I wander after remote client copy from PRD to QAS do I have to change Logical system on QAS. Do I have to run some postprocessing program?
Thank you in advance

Hi Branko,
After the system copy, go to transaction SALE -> Sending and receiving Systems -> Logical systems -> Define Logical System , click New Entries and create a new logical system for your QAS; then go to SALE -> Sending and receiving Systems -> Logical systems -> Assign Client to Logical System, click on the client, click change and assign the new Logical system.
Other activities, check Jobs, RFC's, etc...
Regards
Juan
Please reward with points if helpful

Client copy between clients having different OS(Linux and Windows)

Dear All,
I would like to do client copy between a client in development system having Linux OS and a client in sandbox system
having Window OS.
Is it possible?
Regards,
Vinod

You can get more info at ::*
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm*
& also check note 552711 which clearly say at point no 5 .*
5. Can I create client copies in a heterogeneous system landscape?*
Remote copies or client transports can also be carried out between different database and operating systems.*
Please close thread if you feel your question has been answered.*
Thanks..
Mohit
Do NOT post in bold.... 2nd warning.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Aug 27, 2009 12:07 PM

Compare SPRO between DEV and QAs

Hi there,
I'm in GoLive eve and all consultants are desperate with the future problems.
Is there a way that I can compare the customizing (SPRO) between DEV and QAS or another system?
Thanks,
Dany Anderson
Edited by: Dany Anderson Alves on Mar 4, 2008 9:03 PM

Hi,
Use comparison tool in SCU0.
Select SAP Reference IMG and ssay compare.
This will show the differences if any.
You can also compare at component level.
cross system visibility should be maintained in SCC4 settings for the client
Regards,
Revathi

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Can you tell me some differences between R2 and R3 systems?

Hi,
Can you tell me some differences between R2 and R3 systems?
I guess R2 is used only for mainframe systems some time back. But i dont know why we prefered R3 over R2.
Please clarify this!
Thanks,
Venkatesh.R.

SAP R/3 is
Client server
3 tier
Presentation
Application
Database
Relatively hardware and database independent
ABAP/4 applications runs on application servers.
Dispatcher, shared memory, gateway, work processes are major components of an application server.
SAP R/3 offers
Comprehensive suite of integrated applications meeting the needs of most business
Best practice process design
Ability to configure to
Industry sector
Unique business requirements
In a R/2 System - it is a 2 Tier System based on Mainframe Systems with Intelligent terminals
R/3 is based 3 tier Client Server architechture and supports the R/2 system as well.
R/3 Middleware -
Client server
Uses underlying relational databases
Oracle
SQL server
Ingress
Sybase
Its graphical user interface
Sap GUI
hence R/3 is preffered over R/2 systems because they support Client Server Architecture which is easily configurable,scalable and can integrate with ERP systems and integrate with SOA or Web based Apps.
Thanks,
Saurabh Shukla

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

DataSource / Structures mismatched between Dev and Test Systems. ..!!

Hi,
We are doing a scenario. Where XI will update the data into PSA through ABAP proxy.
Scenario worked perfectly in development system.
We transported the objects from Dev to test. The Strucures are mismatched in SE11 between development and Test systems as below.
Data sources (ZDS_RECIHDR and ZDS_RECTPALL) looks ok. But when I saw the structures in SE11 they are not correct, they got mismatched.
Development:
/BIC/CQZDS_REC00001000 - Header (ZDS_RECIHDR)
/BIC/CQZDS_REC00003000 - Allocation (ZDS_RECTPALL)
Test:
/BIC/CQZDS_REC00001000 - Allocation (ZDS_RECTPALL)
/BIC/CQZDS_REC00003000 - Header (ZDS_RECIHDR)
Kindly let me know where it might have gone wrong?
Thanks
Deepthi

We done it already. Still it is failing.
While transporting, it is failing and showing the error as
Program ZPI_CL_IA_PAYMENT_ALLOCATION1=CP, Include ZPI_CL_IA_PAYMENT_ALLOCATION1=CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZSALENUM', but there is a component called
Program ZPI_CL_IA_PAYMENT_HEADER======CP, Include ZPI_CL_IA_PAYMENT_HEADER======CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZTRANDATE', but there are the following com
The Structure is mismatched in SE11 between header and allocation structures. That is the reason it is failing.
Any more ideas pls?

Can't copy between Classic and OS X

Hi,
i carbon copied a OS 10.4 installation to a new disk, then copied an os 9 folder to that same disk in the root directory. Now i get an error message that i can't copy between classic and os x, an error message that keeps on appearing.
Both the os x.4 and the classic version worked before on that same mac, but on different disks... any chance why this won't work anymore??
G4 Mac OS X (10.4.6)

Hi Peter. Welcome to the Forum…
Please give the exact wording of the error message, and a brief description of the circumstances.
How many disks were involved in copying OS 10.4 to a new disk, please? It can work but it's not reliable to clone from the boot volume, so you should really do that only with a third disk to boot from…
Are there no other symptoms? Everything but copying works fine?

Client copy between different operating systems.

Hi Experts,
Our production system is running on HP-UX OS. We are installing a standby quality system and planning to do a client copy to this system from production by taking this into transport domain. But this new system is in windows. So, is it possible to perform a client copy where the source system is HP -UX and target system is windows??
Regards,
Amit.

Hi Amit,
Follow SAP Note 552711 for client copy. Refer to qns no 4 & 5, which is relevant for your question.
Can I create client copies in a heterogeneous system landscape?
Remote copies or client transports can also be carried out between different database and operating systems.
Regards,
Debasis.

Does two seperate client required if the solman monitors DEV and QAS system

Hi All,
This is our client landscape:
1 Dev-SolMan->For all development and quality systems(ECC 6.0, BI and EP).
1 PRD-SolMan->For all production systems(ECC 6.0, BI and EP).
Note: We have build only DEV-SolMan system as of now and we haven't done any configuration yet like either service desk or ChaRm.
The question is:
Do we need to have two seperate clients in DEV-Solman, one for all development systems and one for all quality systems? or Can we have a single client in DEV-Solman to handle all development and quality systems? What is the SAP recommented approach?
Thanks
Sanjai

Hi,
you even don't need separate Solution Manager systems to monitor DEV / QA and Prod. You could use one SolMan client to monitor and administrate all systems / clients.
Maybe it would be a good idea to create different Solution Landscapes, but this depends on your need.
Separate clients are no good option, because CHARM can only activated in on client. Also if you plan to activate charm, you need a solution that contains all systems in your transport landscape (DEV, QAnad Prod).
Kind Regards,
Holger

Client copy in bitween different plotform systems

Dear Friend's
I am having a scenario at our work place about client copy .
Our requirement is to do client copy from Production to our sandbox system which is on Window 2003.
Here the problem is Our Production is ECC 6.0 SR2 on AIX 5.3 , oracle 10.2.0.2.0 and our Sandbox is ECC 6.0 SR 2 on Window 2003 , Oracle 10.2.0.2.0.
I did not face this kind of scenario ever. So Please let me know, If you have any solution about my issue.
Thanks in advance.
Regards;
R k.sindol

Dear R k sindol,
Post your queries in relevant forum to maintain the quality of SCN.
[Transporting Clients Between Systems|http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c824ba111d189750000e8322d00/content.htm]
Regards,
Naveen

Client copy between PROD and QAS system

Similar Messages

Maybe you are looking for