Client copy completed but scc3 shows some tables deleted why

Dear Experts ,
here i perform test run for production client 500 to quality client 400 (remote type)
and i choose sap_cust profile
after some time my remote client copy is completed successfully
and i find log files in scc3
my doubt is when i execute scc3 for log file
it shows log analysys in that
target client source system every thing is their and also
here i found
number of tables      50089 to 50089
Deleted lines            10905326
copied lines             12451200
i did not understand is that my client copy is successful or not
but log file shows successful,
if it is successful means why some lines are deleted
please reply me
Regards

Hi,
As per your logs, you have run the test run, so client copy is not happened. If status in SCC3 is successful then client copy is successful. You can also further check logs.
Thanks
Sunny

Similar Messages

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read.

I have photos on a cd which I'm trying to open . If I click on them I can see the picture in the preview, but when I double click it doesn't recognise the picture. They are all in .jpg format. Tried copying them but it said some data cannot be read. The files exist but I just can't seem to view them

Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file. If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
You could try a photo file recovery application like MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
OT

My apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are miss

my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info                  CSI    000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info                  CSI    000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info                  CSI    000004d5 [SR] Verify completcannow detail I get this result

and this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir

I have a tool in window8 its work perfect in all other windows but its show some error in windows8

i have a tool in window8 its work perfect in all other windows but its show some error in windows8
in all other windows its hows all screens nd sound
but in wondows8 its miss 3 screens nd sound its blank screen appear in windows8

after installing this the error appeared
run time error 372
failed to load cntrol 'shockwavectl' from cntroll.dll
'From: [email protected]
To: [email protected]
Subject: RE: i have a tool in window8 its work perfect in all other windows but its show some error in windows8

SQL Server Agent daily job indicates completed but stored procedure and tables indicate otherwise -- 2nd time in 4 years also on Sunday?

Hi
We have scheduled job running a console application daily. For some reason on Sunday's only the scheduler says it ran successfully but no email confirmation, table entries and the normal processing occurs.
This happens only on a Sunday and for no explained reason. No problem on the day before or after...
I think this also happened with Daylight Savings adjustment. Has anyone else encountered this?
Any ideas or suggestions
Environment is:
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64) Jun 28 2012 08:36:30 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Thanks in advance
George

Michelle
Thanks for your reply. I was out sick all last week.
I too suspected our network and/or security features or maintenance.
Me and my manager decided to include a text log file which we append certain key points for each iteration when the vb.net console app runs to hopefully determine what is happening sporadically.
I created many errors and scenarios ( DB and network connectivity, unable to send email) and they were caught and appended to the logfile so all I can do is wait to see when/if this occurs.
Sincerely
George
NOTE: DISREGARD THE "Failure Sending mail" exceptions they disabled it for security reasons and it only works for production jobs and special users
DailySerial Feed started at 11:48:34 AM
Attempting DB Connection 11:48:34 AM
DB Connection successful 11:48:34 AM
completed successful 11:48:38 AM Record count: 153 processed
DailySerial Feed started at 11:49:37 AM
Attempting DB Connection 11:49:37 AM
DB Connection successful 11:49:37 AM
completed successful 11:49:42 AM Record count: 0 processed
SendEmail failed 11:49:44 AM - Failure sending mail.
DailySerial Feed started at 4:37:42 PM
Attempting DB Connection 4:37:42 PM
DB Connection successful 4:37:44 PM
completed successfully 4:37:44 PM Record count: 153 processed
SendEmail failed 4:37:45 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.78:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
DailySerial Feed started at Monday12:50:29 PM
Attempting DB Connection 12:50:29 PM
DB Connection successful 12:50:29 PM
completed successfully 12:50:30 PM Record count: 153 processed
SendEmail failed Monday12:50:31 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.78:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
DailySerial Feed started on Monday, March 23, 2015 - 2:31:40 PM
Attempting DB Connection 2:31:40 PM
Connection failed Monday 2:31:55 PM for: server=ITDEVPTENSDEV\sqlserver2008r2yada;database=ICES;Trusted_Connection=True - A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found
or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
SendEmail failed Monday 2:31:55 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.70:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
Rollback Exception 2:31:55 PM - unable to OPEN the DB ConnectionA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct
and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) - - Connection established
SendEmail failed Monday 2:31:55 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.70:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
DailySerial Feed started on Monday, March 23, 2015 - 2:36:38 PM
Attempting DB Connection 2:36:38 PM
DB Connection successful 2:36:38 PM
DailySerial feed completed 2:36:38 PM Record count: 0 processed
SendEmail failed Monday 2:36:38 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.70:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
DailySerial Feed started on Monday, March 23, 2015 - 2:37:03 PM
Attempting DB Connection 2:37:03 PM
DB Connection successful 2:37:03 PM
DailySerial feed completed 2:37:03 PM Record count: 153 processed
SendEmail failed Monday 2:37:03 PM - Failure sending mail.
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.8.86.70:25
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
Imports System.IO
Imports System.Net
Imports System.Text
Imports System.Data.SqlClient
Imports System.Data.Common
Public Module DailySerialFeed
Dim attempts As Integer = 0
Dim sb As New StringBuilder
Dim myconnection As New SqlConnection
Dim m_SqlConnStr As String = My.Settings.SqlConnStr
Dim strCardAFCExportBatchIDGuid As String
Dim LogMessage As String
Dim TotalExtracted As Integer
Public sSource As String = "DailySerialFeed"
Public Slog As String = "Application"
Public sEvent As String = ""
Public ErrText As String
Public sMachine As String = "."
Dim mySqlTransaction As SqlTransaction
Dim time As DateTime = DateTime.Now
Dim format As String = "MMM ddd d HH:mm yyyy"
Dim LogFile As StreamWriter ' SFTPData\AFC\DailySerialFeedLog.TXT
Dim ExceptionString As String
Public Sub Main()
Try
LogFile = New StreamWriter(My.Settings.LogFile, FileMode.Append) ' append to file
LogFile.WriteLine("") '(Environment.NewLine)
LogFile.WriteLine("DailySerial Feed started on " & Now.ToString("D") & " - " & Now.ToLongTimeString)
strCardAFCExportBatchIDGuid = System.Guid.NewGuid().ToString
LogFile.WriteLine(" Attempting DB Connection " & Now.ToLongTimeString)
OpenDBConnection()
LogFile.WriteLine(" DB Connection successful " & Now.ToLongTimeString)
mySqlTransaction = myconnection.BeginTransaction("OuterTransaction")
'PadSerialNumbers() Lewycky 7/19/13 Zero digit padding for 8 or 9 digital serial numbers Disabled
'RemoveZeroSerial() ' Lewycky 11/3/11 remove zero serial numbers from being sent to AFC now in FlagSerialforExtract module
FlagSerialforExtract()
ExtractFlaggedSerialFile()
mySqlTransaction.Commit()
CloseDBConnection()
StageforFTPAndArchive()
sb.AppendLine(" " & "DailySerial Feed completed. Record count: " & TotalExtracted & " processed")
LogFile.WriteLine(" DailySerial feed completed " & Now.ToLongTimeString & " Record count: " & TotalExtracted & " processed")
Catch ex As Exception
If Not mySqlTransaction Is Nothing Then
LogFile.WriteLine(" Rollback Exception " & Now.ToLongTimeString & " - " & ex.Message)
mySqlTransaction.Rollback("OuterTransaction")
End If
sb.AppendLine(" " & "Problem encountered with DailySerialFeed extract :" & ex.Message & " - " & ErrText)
LogFile.WriteLine(" Rollback Exception " & Now.ToLongTimeString & " - " & ex.Message & " - " & " - " & ErrText)
Finally
SendEmail(RTrim(sb.ToString))
' if dbconnection is still open during exception/error force it closed
If myconnection.State = ConnectionState.Open Then
LogFile.WriteLine(" Closing DB Connection(2) " & Now.ToLongTimeString & " - ")
CloseDBConnection()
End If
LogFile.Close()
End Try
End Sub
Public Sub OpenDBConnection()
myconnection = New SqlConnection(m_SqlConnStr)
Try
myconnection.Open()
Catch ex As Exception
Dim strErr As String = ex.Message
LogFile.WriteLine(" Connection failed " & Now.ToString("dddd ") & Now.ToLongTimeString & " for: " & My.Settings.SqlConnStr & " - " & strErr)
SendEmail(strErr)
Throw New System.Exception("unable to OPEN the DB Connection" & strErr)
Finally
ErrText = "Connection established "
'sb.AppendLine("Connection established ")
End Try
End Sub
Public Sub FlagSerialforExtract()
' Update the batch of records in CardAFCExport table with the GUID related to that batch created earlier
' Now included in the same Commmand - removal of any zero digit serial numbers previously in another module
Dim myCommand As New SqlCommand
Try
' lewycky pull serial numbers prior to midnite 1 day lag
' lewycky use the GUID created in the Main() for updating in dbo.CardAFCExport indetifying qualifying serial
' numbers for this daily batch to ultimately be sent to AFC and to receive back detailed metrocard data
myCommand = New SqlCommand("DELETE from CardAFCExport where CAST(CardSerialNumber as bigint)= 0;Update CardAFCExport Set CardAFCExportBatchID = '" & strCardAFCExportBatchIDGuid & "' where
CardAFCExportBatchID is null and CreatedDate < DATEADD(dd,0,datediff(dd,0,getdate()))", myconnection, mySqlTransaction)
myCommand.ExecuteNonQuery()
Catch ex As Exception
Dim strErr As String = ex.Message
ErrText = "unable to update the batch with its GUID " & strErr & " "
sb.AppendLine("unable to update the batch with its GUID." & " ")
sb.AppendLine("Error Message : " & ex.Message)
LogFile.WriteLine(" FlagSerialforExtract failed " & Now.ToLongTimeString & " - " & strErr)
Throw New System.Exception(strErr)
Finally
ErrText = "Serial numbers flagged with GUID successfully "
'sb.AppendLine("Serial numbers flagged with GUID successfully ")
End Try
End Sub
'Public Sub PadSerialNumbers() 7/19/13 Lewycky Disabled per Serial numbers becoming duplicated if the enter with and without zeros
' Dim myCommand As New SqlCommand
' Try
' myCommand = New SqlCommand("update CardAFCExport set CardSerialNumber = '0' + CardSerialNumber where CardSerialNumber in (SELECT CardSerialNumber FROM CardAFCExport where LEN(cardserialnumber) = 9 )",
myconnection, mySqlTransaction)
' myCommand.ExecuteNonQuery()
' myCommand = New SqlCommand("update CardAFCExport set CardSerialNumber = '00' + CardSerialNumber where CardSerialNumber in (SELECT CardSerialNumber FROM CardAFCExport where LEN(cardserialnumber) = 8 )",
myconnection, mySqlTransaction)
' myCommand.ExecuteNonQuery()
' Catch ex As Exception
' Dim strErr As String = ex.Message
' ErrText = "unable to pad serial serial numbers" & strErr
' sb.AppendLine("unable to pad serial serial numbers" & " ")
' sb.AppendLine("Error Message : " & ex.Message & " ")
' SendEmail(strErr)
' Throw New System.Exception(strErr)
' Finally
' ErrText = "Serial numbers padded successfully "
' sb.AppendLine("Serial numbers padded successfully ")
' End Try
'End Sub
'Public Sub RemoveZeroSerial()
' now in the FlagSerialforExtract module
' ' Zero Serial number deletion still needed ( 8 & 9 digit ) otherwise 999 records will be generated on ICES when AFC returns file
' Dim myCommand As New SqlCommand
' Try
' myCommand = New SqlCommand("DELETE from CardAFCExport where CAST(CardSerialNumber as bigint)= 0", myconnection, mySqlTransaction)
' ' myCommand = New SqlCommand("delete from CardAFCExport where CardSerialNumber = '0000000000' ", myconnection, mySqlTransaction)
' myCommand.ExecuteNonQuery()
' Catch ex As Exception
' Dim strErr As String = ex.Message
' ErrText = "unable to remove Zero Serial Numbers" & strErr
' sb.AppendLine("unable to remove Zero Serial Numbers.")
' sb.AppendLine("Error Message : " & ex.Message)
' SendEmail(strErr)
' Throw New System.Exception(strErr)
' Finally
' ErrText = "Zero serial numbers removed "
' sb.AppendLine("Zero serial numbers removed successfully ")
' End Try
'End Sub
Public Sub ExtractFlaggedSerialFile()
' extract metrocard serial number feed in ascending order and w/o dupes
Dim column1 As String
Dim TotalRecords As Integer = 0
Dim myCommand As New SqlCommand
Dim objStreamWriter As StreamWriter
Try
' 7/19/13 - Lewycky modification to remove duplicates and omit the same serial number entered as a 8 or 9 digit number instead of the
' required 10 digit for AFC w/o extra DML updates due to Serialnumber being a Unique value per batch
myCommand = New SqlCommand("SELECT DISTINCT RIGHT('00' + Cardserialnumber,10) Cardserialnumber FROM CardAFCExport where CardAFCExportBatchID = '" & strCardAFCExportBatchIDGuid & "' order by
CardSerialNumber", myconnection, mySqlTransaction)
' myCommand = New SqlCommand("SELECT distinct CardSerialNumber FROM CardAFCExport where CardAFCExportBatchID = '" & strCardAFCExportBatchIDGuid & "' order by CardSerialNumber", myconnection,
mySqlTransaction)
myCommand.CommandType = CommandType.Text
objStreamWriter = File.CreateText(My.Settings.AFCExportInterimFile.ToString)
Dim myreader As SqlDataReader = myCommand.ExecuteReader
While myreader.Read
column1 = myreader.Item("CardSerialNumber").ToString
objStreamWriter.WriteLine(column1)
TotalExtracted = TotalExtracted + 1
End While
myreader.Close()
objStreamWriter.Close()
' Extract file is now created
myCommand = New SqlCommand("INSERT INTO CardAFCExportBatch (CardAFCExportBatchID, TotalRecords, ExportedDate, CreatedDate, CreatedBy) values ( '" & strCardAFCExportBatchIDGuid & "', " +
TotalExtracted.ToString + ", GETDATE(), GETDATE(), '00000000-0000-0000-0000-000000000000')", myconnection, mySqlTransaction)
myCommand.ExecuteNonQuery()
Catch ex As Exception
Dim strErr As String = ex.Message
ErrText = "unable to create extract from CardAFCExport last input record " & TotalRecords & "' '" & strErr
LogFile.WriteLine(" ExtractFlaggedSerialFile failed " & Now.ToLongTimeString & " - " & ErrText)
LogMessage = ErrText
sb.AppendLine(ErrText)
sb.AppendLine("Error Message : " & ex.Message)
SendEmail(LogMessage)
Throw New System.Exception("unable to create extract from CardAFCExport last record " & TotalRecords)
Finally
ErrText = "Batch Info updated & Extract created. Rec count: " & TotalExtracted
End Try
End Sub
Public Sub StageforFTPAndArchive()
'KD - Getting file ready for AFC ftp. Also archive the file with date time stamp.
Try
Dim strFileName As String = Path.GetFileNameWithoutExtension(My.Settings.AFCExportInterimFile)
Dim strDirectory As String = Path.GetDirectoryName(My.Settings.AFCExportInterimFile)
Dim strTimeStamp As String = Now.ToString("MMddyyyyhhmmss")
Dim strExtension As String = Path.GetExtension(My.Settings.AFCExportInterimFile)
'KD : copy AFCSWIPE.TXT file to outgoing folder
System.IO.File.Copy(My.Settings.AFCExportInterimFile, My.Settings.AFCExportFile.ToString, True)
'KD : make yyyyMMDD_hhmmss_ICE_SWP.TXT file to outgoing folder for MCO (Randy Steiner)
System.IO.File.Copy(My.Settings.AFCExportInterimFile, My.Settings.AFCExportFilePath + Now.ToString("yyyyMMdd_hhmmss") + "_ICE_SWP.TXT", True)
'KD : Archive file in archieve folder with date time stamp
System.IO.File.Move(My.Settings.AFCExportInterimFile, My.Settings.AFCExportArchivePath + strFileName + "_" + strTimeStamp + strExtension)
Catch ex As Exception
sb.AppendLine("Error occurred in StageforFTPAndArchive." + Chr(13) + Chr(10))
sb.AppendLine("Error Message : " & ex.Message + Chr(13) + Chr(10))
LogFile.WriteLine(" StageforFTPAndArchive failed " & Now.ToLongTimeString & " - " & ex.Message)
Throw ex
End Try
End Sub
Sub SendEmail(ByVal msg As String)
' Dim myWebRequest As WebRequest
' Dim myStreamReader As StreamReader
Dim strSubject, strBody As String
Dim myMailMessage As Mail.MailMessage
Dim mySmtpClient As Mail.SmtpClient
strBody = msg
' Get subject from settings and replace placeholder with current date
strSubject = My.Settings.EmailSubject
strSubject = strSubject.Replace("<date>", FormatDateTime(Now(), DateFormat.ShortDate))
Try
myMailMessage = New Mail.MailMessage(My.Settings.EmailFrom, My.Settings.EmailTo, strSubject, strBody)
If My.Settings.EmailCC <> "" Then myMailMessage.CC.Add(My.Settings.EmailCC)
myMailMessage.IsBodyHtml = My.Settings.EmailHtml
' Send email
mySmtpClient = New Mail.SmtpClient()
mySmtpClient.Host = My.Settings.SmtpServer()
mySmtpClient.Send(myMailMessage)
Catch ex As Exception
Console.Write("could not send Mail-" & ex.Message)
'ExceptionString = "Exception type " & ex.GetType.ToString & Environment.NewLine & "Exception message: " & ex.Message + Environment.NewLine
'& "Stack trace: " + ex.StackTrace + Environment.NewLine;
'LogFile.WriteLine(ExceptionString)
'LogFile.WriteLine(" SendEmail failed " & Now.ToLongTimeString & " - " & ex.Message.ToString & ex.InnerException.ToString)
' w.o stack trace ?
LogFile.WriteLine(" SendEmail failed " & Now.ToString("dddd ") & Now.ToLongTimeString & " - " & ex.Message.ToString & Environment.NewLine & (DirectCast(ex.InnerException,
System.Exception).InnerException.ToString))
End Try
End Sub
Public Sub CloseDBConnection()
Try
myconnection.Close()
Catch ex As Exception
Dim strErr As String = ex.Message
LogFile.WriteLine(" CloseDBConnection failed " & Now.ToString("dddd ") & Now.ToLongTimeString & " for: " & My.Settings.SqlConnStr & " - " & strErr)
Throw New System.Exception("unable to CLOSE the DB Connection" & strErr)
Finally
ErrText = " DB Conn closed & Serial Feed completed normally "
End Try
End Sub
End Module

Monitor issue - PC completed but monitor shows red

We have implemented Support Pack. For one of the data load - Process chain has completed and data loaded to cube but process chain log still shows red. Please help.
Thanks,
Mohammed

Hi,
If you feel that this issue is happened due to support pack implementation then all of your process chains available in system should have monitor status as RED.
But if you are facing issue with particular load then check the process log and job log in SM37. There might be some issues in current load, try to repeate the load and see how it works?
Regards,
Durgesh.

Job completed but status showing still yellow

Hi Experts,
One of full load status tab showing yellow, but the job completed when i checked in SM37.
I am loading from ODS to Cube there is no PSA. we are using 3.5 version.

Hi David,
Check the load in the details tab weather all the data packets are in green status.If at all the idocs are hung or TRFCs are hung you may face this issue. try to manually flush the hung Idocs and TRFCs.
If everything is fine wait for the PID process to finish- some times it happen the PID might be running at the background.
If everything is fine n the status of the request is yellow -try to change the status of the load to green.
Regards
KP
Edited by: prashanthk on Oct 5, 2010 2:22 PM

How to copy complete column data of a table control similar to ALV

Hi All,
I have a senario where i need to select one column of a Table control and press Ctrlc then the complete column details should be copied and be able to paste it in another colum using ctrlv.
please suggest me how can i copy the complete column data similar to ALV .
Thanks in advance .
Edited by: ravi kumar on Sep 13, 2011 2:53 PM

Dear Ravi
I'm afraid there is no standard functionality for copy paste in ALV.
You would need to develop something to achieve that - a button for example.
Kind Regards
/Ricardo Quintas

ITunes shows correct artword but iPod shows some wrong artwork

Any ideas on this one? My computer crashed as I was updating iPod a couple of days ago. All music is ok but cover artwork is a bit haywire. Although iTunes shows the correct artwork for all songs, the iPod shows the artwork for Bob Dylan's "Blood on The Tracks" for several albums. I even tried deleting that album but it made no difference - any ideas?

Plug in the iPod, uncheck the box to show artwork on the iPod then sync the iPod (all artwork will be removed from the iPod).
When it is done, reselect that check box and sync the iPod again (all artwork added to iPod).
This often times clears up display issue with artwork on the iPod.
Cheers,
Patrick

I HAVE AN ACER COMPUTER. IT HAS WINDOWS 7. I USED TO HAVE ADOBE FLASH. I TRY TO REINSTALL AND GET THE MOST UP TO DATE VERSION. IT SAYS IT IS COMPLETE BUT NEVER SHOWS UP ON MY COMPUTER.

WHY WON'T IT INSTALL ON MY COMPUTER? I USED TO HAVE IT.

Hello,
What do you mean by 'never shows up on the computer'? Flash Player is a browser plugin and works in the browser, not outside, unless you have a SWF file you want to open, in which case you'll need the Flash Player projector.
What browser are you using? If you launch the Control Panel and go to Control Panel\All Control Panel Items\Programs and Features do you see Adobe Flash Player listed?
Maria

I have install wamp server one my first laptop and and i access data with my second laptop. i have connected both pc's with internet wire but it show some error"enable to connect mysql server " plz help me

string wire = " Persist Security Info=False; server=xain; port=3307; database=test;username=root;password=";
string query = "insert into test.server_base values('" + textBox1.Text + "', '" + textBox2.Text + "')";
MySqlConnection condatabase = new MySqlConnection(wire);
MySqlCommand cmd = new MySqlCommand(query, condatabase);
MySqlDataReader myreader;
try
condatabase.Open();
myreader = cmd.ExecuteReader();
MessageBox.Show("Good");
condatabase.Close();
catch (Exception xe)
MessageBox.Show(xe.Message,"na g na");
/*server=xain is a server name assing in which database is install */

Hi sohail.
As you title mentioned wamp server, for WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. This is third-party software. I
am afraid this is out of our support. I would suggest you to ask in their
official forum. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Final Cut X shows 86 GB free, but Finder shows 392 GB free, why?

I've moved my Events and Projects to an external hard drive and accessing them from that location works well. However, when I go to import new footage, Final Cut X shows that I only have 86 GB free. On my desktop it shows that I have 392 GB free. Why dont these 300 GB show up in Final Cut X and/or what files/folder(s) do I need to delete? Thanks!

How did you move the events?
If you did it by File>Move Event it should have deleted the old files but if you just copied the events over they will probably still be residing in their original place.
They need dragging to the trash and deleting.

Certain artists, albums not showing on ipod but do show in Library. Why?

My 60 gb ipod is synced with my Itunes library - which has all my cd's downloaded into it. However, even though an artist or album may show in my Itunes library, it doesn't show on my ipod.
For instance Maroon 5 Songs About Jane CD doesn't show when I search Maroon 5 in Artists or Maroon 5 in Genre but it does show when I look up the album name in Album. With nearly 1000 albums on my ipod, I'm not always able to remember an album name.
How do I fix this?
Compaq Presario Windows XP
Compaq Presario Windows XP
Compaq Presario Windows XP

This is a very annoying problem that I have encountered myself. The only way I found to fix this is in iTunes (when the iPod is connected) to go into the iPod's music list to where the artist is and edit the artist's name (this can also be done with the track title as well). Sometimes there is an extra space at the end of the name, or even before hand. Just make sure it's the proper name/title and that there aren't any unwanted spaces added to it. Once you do this, the iPod should recognize that the song is there when it's disconnected.
Hope this helps you.
Vaughn

Recently I Have lost the ability to hear the sound in some news, youtube, videos. THE Sound works on my IPAD, but not for some videos. Why is this?

I Recently lost the ability to hear the audio in some news, facebook and youtube videos. The sound/audio works fine on my iPad. Why is this? Is there some way to change or reset settings? Cookies?

iOS 8.2 has since fixed this bug. YAY!

When copying a cd to itunes some tracks muscue why?

while copying a music cd to my macbook one cd copies with one track as a separate album. how do i get it back into the orig album. another cd copies as single tracks. how do i get those into one album? help

Steve MacGuire aka turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

Client copy completed but scc3 shows some tables deleted why

Similar Messages

Maybe you are looking for