Client copy error - Export/Import
Hello Folks,
With a certain business requirement we have small scale implementation planned every quarter and as per the requirement we are performing a client copy into one of our SANDBOX(SDX) client (201) every quarter from our Production ECC system (cleint-600).
*The SANDBOX is used for POC and new enhancement testing and also for training purposes.
Cleint copy (export/import method)
============================
PRD (600) ==> SDX (201)
Both Sanbox and production are with same SAP version, patch, OS and database versions.
The client copy(client export-import method) is successfull when the client is new (SDX-201), but when we did the client next time on the same client, the client copy finished with many inconsistencies.
We have also tried deleting the client 201 and then recreating client 201 in SDX and copy from our PRD-600. But the result is same, the client copy finished with many inconsistencies.
Now we are not able to figure out the problem why this problem is occuring. The whole point of client copy from PRD is not helping project. As a workaround at the moment we are copying onto a new client every quarter.
We have to get a solution. Please suggest.
PS: We can not do the system refresh, because there are other clients on the Sandbox systems and we do not want them to be disturbed.
Lookign forward for your suggestions.
Thanks
James
Hello James,
The client copy(client export-import method) is successfull when the client is new (SDX-201), but when we did the client next time on the same client, the client copy finished with many inconsistencies.
What inconsistencies ? Can you please post the error log ?
Regards,
Subhash
Similar Messages
-
Homogeneous system copy using export/import on WIn/Ora
Dear experts,
i need to know the homogeneous system copy procedure using export/import method for following scenario as we are in the process of Data center migration of SAP systemsfrom location to another location.
Source system:
ECC6/BI7/APO(ABAP stack)
OS:WIndows 2003
D:B:Oracle 10g
Target System: New hardware installed on Virtual environment(VMware)
No change of SID
ECC6/BI//APO
OS:WINDOWS2008
D:B: Oracle 11g
It would be great if anyone can share the documentu2019s/links (Not SAP homogeneous system copy guide) which you have prepared for the homog. system copy using export/import on Windows/oracle as i have done the system copy using backup/restore for ABAP stack and export/import for Java stack so far.
Therefore i am not sure about this procedure/prerequisites/checklist needs to prepare as i have gone through the SAP guide but it is not step by step document.
CheersThere are two approacahes for your project
1) First wether to use Oracle11g on target database
2) Continue with Database Oracle 10.2 on traget database
If you want to use Oracle11.2 on your target database you have to search the installers which are supported for 11.2 database. If the installers are available then only you can install your target database using Oracle11.2.Other wise t use Oracle10.2.0.4 is supported on Win2008r2. You can use this version of Oracle database to build ur target database.It works fine . Absolutely no problem.
Later on you can upgrade the Oracle10.2 to 11.2 Onwards.
If installers are avialble you can use Oracle11.2 also. There is absolutely no problem.
As per my knowledge installers are available and supported with Oracle11.2.Also check the PAM before arriving on any deciscion. -
Hi Experts,
While Client copy in Local System , I am facin gthis Error, please anybody help me out.
client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
Regards,
Amit,Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
1) If you are on windows then :
Type '
w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
Therefore to get out of this error follow the simple steps=>
I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
III) Confirm this by typing '
w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system while copying.
2) If you are using Linux then:
Create the directories as mentioned above and give full access to directories by using CHMOD command.
Share 'sapmnt' directory if necessary.
Note: Change the protection level of your client in SAP if necessary:
SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}. -
Client Copy error during client export / RX file is not getting
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Client Copy error during client export / RX file is not getting generated
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Dear All,
PLease help to sort this isuue.
i have created client 810 & try to copy client from 800 to 810 in the same SAP application server., Error comes after 35% to 40% completion of Client Copy.
Error - maximum runtime exceeded.
once i see SAP Note Client 800 showing
In progressing
Termination of Programme RS_Client_Copy_BW.
Notes PDF File Showing
Number 316923
Version 3
Processor ADMIN
Processing Status In Process
Implement. Status Cannot be implemented
Language EN
Short Text Termination of program RS_CLIENT_COPY_BW
Component BW-SYS Basis System and Installation
Long Text
Symptom
After you copied the BW System from one client to another, you execute program
RS_CLIENT_COPY_BW. The program terminates with the message that you are only
authorized to work in client ... (Brain 009). The specified client is the old client
which have just copied.
Additional key words
OLAP, Business Information Warehouse, Clientcopy
Cause and prerequisites
The problem is caused by a program error in program RS_CLIENT_COPY_BW.
Solution
Import Support Package 04 for BW2.0B (BW2.0B Support Package 04 or SAPKW20B04) into
your BW System. The Support Package is available as soon as Note 0213321 is released
for customers. It contains further information on Support Package 04 for BW2.0B.
Refer to Note 110934 which contains information on BW Support Packages.
Workaround:
The program has already determined that all number ranges have been copied correctly.
The program terminates during attempt to set the BW client correctly. You can set the
BW client yourself by executing function module RS_MANDT_UNIQUE_SET (Transaction
SE37). Enter the new client as value for parameter i_mandt. Make sure, that this
corresponds to the profile parameter login/system_client in your system.
Source code corrections
Valid Releases
SAP Application
46C
Business Information Warehouse
20A
20B
Links to Support Packages
Software Component Release Package Name
SAP Note Nr. 316923 13.10.2010 Page 1
Business Information Warehouse
20A SAPKW20A10
Please Help to resolve this issue.
Regards,
Jiitendra.Hi,
As per your error it looks like that you are running client copy in dialog mode. If yes, run it in background or increase your work process run time.
Thanks
Sunny -
System copy with Export/Import Distribyted system UNIX database, Windows CI
HI
we have a distributed system witch I want to make a copy of
Oracle Database on HP-UX
CI + SCS on Windows
Dual stack system ABAP/Java
1) I have made an system copy with data base copy tools, and that works fine.
2) I have made a system copy export/import of a "central system"
If I try to make an export/import system copy on a distributed system it wont work.
( this work fine in a central system) I dont get anny error messages all gren checks marks !
It seems like the problem are in not finding the profiles from CI ?
It find the profiles for the sapgateway.
I someone are more interested I have more documentation with screen shots in a word document.
I Have used Installation Master SR3 and tryed with some older versions as well.
I have read SAP Note 970518 - Hom./Het.System Copy SAP NetWeaver 7.0 (2004s) SR2
SAPINST
Using virtual hosts for central and/or DB instances
SYMPTOM:
You are using virtual host names for your central instance and/or the database instance (e.g. in a HA environment). Although SAPinst finishes successfully, some export steps are not being performed.
SOLUTION:
Start the export with the property SAPINST_USE_HOSTNAME=<virtual host>.
If the central instance and the database instance run on different hosts, run the database export with SAPINST_USE_HOSTNAME=<virtual host name of the DB server> and - if you run a Java or ABAP+Java system - run the central instance export with SAPINST_USE_HOSTNAME=<virtual host nameof the central instance host>.
If you run a central system with different host names in the profiles, handle the export as a distributed export, calling SAPinst with parameter SAPINST_USE_HOSTNAME. Perform the export of the database instance on the DB server, calling SAPinst with SAPINST_USE_HOSTNAME=<virtual host of the DB server>.Hi I have received folloving answer from SAP:
You're doing everything correct - besides one thing.
When you specify the profiles during the database export it cannot be
correct to specify the profiles of the gateway instance located on
the same host.
As a consequence - it picks up the wrong instance G01 and sets the
property 'hasABAP' and 'hasJava' to 'false'... - thus the export
is empty. You can see this within the corresponding 'sapinst.log' file.
The correct procedure would be to specify the profiles of the central
instance on the Windows Machine. If you cannot access them, you should
make them available by Samba or by any type of software which makes
it's possible to export filesystems or directories from windows to
unix.
Best regards
Bent -
can we perform client export for a local client copy(e.g) in DEv system i need a client 500 .i can perform local client copy from 100 but can i do it through export as both clients are in same system.
Hi,
There is an option for Client TRANSPORT which will help you perhaps:
A client transport differs from a remote client copy in that it does not use RFC. Like a remote client copy, however, a client transport is used to copy data between different R/3 Systems.
A client transport consists of two steps. First, a client export extracts client data from the source client to files at the operating system level. Second, the data is imported from the operating systemfiles into the target client.
To perform a client export, proceed as follows:
Log on to the source client. From the R/3 initial screen, choose:
*Tools *(r) *Administration *(r) *Administration *(r) *Client Admin. *(r) Client Transport(r) Client Export. Select the data to be copied using a profile.
Indicate the target system to which the client will be copied. (The target system must be defined in TMS as part of the transport domain.)
Begin the client export. As copying is a lengthy process, use scheduled background processing. The client export performed in the source system <S-SID>, exports the client data asynchronously bycalling the transport program tp at the operating system level. This export process will generate up to
3 data files at operating system level:
. RT< number >; this file contains client-specific data
. RO< number >; this file contains Cross-client data
. RX< number >; this file contains SAPscript texts
Depending on the type of data selected through the client transport profile, the client copy command
files added to the buffer of the target system are
<S-SID>KO<number>; this file is for cross-client data
<S-SID>KT<number>; this file is for client-specific data
<S-SID>KX<number>; this file is also for client-specific data
The client export change requests are not imported when an Import all takes place. Therefore, you must import these requests into the target client using TMS. You must import the data in the following order: first cross-client data, then client- specific data.
After the import process has completed, post-import activities are required possible for object generation steps. After completing the import, log on to the target client. From the R/3 initial screen, choose:
*Tools *(r) *Administration *(r) *Administration *(r) *Client Admin. *(r) *Client Transport *(r) ImportEditing
To display client transport logs, use the Transport Organizer.During client transport, a Repository consistency check can be performed by clicking the RFC system check button in Transaction SCC8. If inconsistencies are detected, a list of the ABAP Dictionary tables definitions missing in the target system is generated. This will help your recognize in advance formal problems that may occur during the import of the source data.
Reward Points if useful
Regards,
Srinivas -
Dears,
Today I am going to do remote client copy from PRD to QAS.
For it yesterday i scheduled Test run in simulation mode.As i am having two CPU for both Dev and PRD so I scheduled it with 6 Parallel Processes.
But my Test run failed with errors:
Copy Type Remote copy
Test Run
Profile SAP_ALL
Status Ended with Errors
User SAP*
Start on 14.08.2008 / 01:30:54
Last Entry on 14.08.2008 / 05:57:54
Statistics for this Run
- No. of Tables 30,806 of 30,808
- Deleted Lines 15
- Copied Lines 72748,776
Warnings and Errors
Table/Object Component Error
BKPF FI Read or Conversion Error
BSIS FI Read or Conversion Error
Thus showing read or Conversion Error in these two tables.
In System log of source system I also see these error:
ORA-01652 unable to extend temp segment by 2560 in PSAPTEMP
Database Error 1652 at SEL access to table BKPF.
Database Error 1652 at SEL access to table BSIS.
Please suggest how to resolve the issue.
Shivam
Edited by: Shivam Mittal on Aug 14, 2008 6:08 AMHello Shivam
How is your remote copy going on?
Did you increase the size of psap temp in order to carryon with the copy?
Your Source system is PRD system.Are you doing this copy while users are using the PRD system.
If not then this may not be result of client copy? or
if no user is logged in in your PRD system,You have to decide if this is due to client copy.
Let me know what corrective measure taken by you to completed the remote client copy?
normally we dont get this dump in the source system but I have psaptemp around 30 GB or more in al my systems so may be this might have not surfaced in my environment.
Thanks
Amit -
Client copy error in test mode
Dear all,
I am doing a client copy in test mode. Following log is generated. Please tell me solution for it.
Log File:
devdemo\sapmnt\trans\log\CC000007.RBD
Client copy from 25.08.2008 15:43:29
System ID............................ RBD
Target client........................ 120
R/3 Release.......................... 700
Basis Support Package...............SAPKB70012
Host................................. devdemo
Start in background............. .....
User................................. SAP*
Parameter
Source destination......................PRD_300
Source system.........................PRD
Client in source system..............300
Users in source system..............RBASIS
Basis Support Package...............SAPKB70012
Copier profile:.......................SAP_ALL
Table selection
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
/ | Change documents are not copied |
Test mode (without database update).. X
3S3T | Start analysis of system 15:43:29 |
/GC1/CC_EXIT_CLIENT_DELETION executed 0( 0) entries copied
Exit program /GC1/CC_EXIT_CLIENT_DELETION successfully executed 15:43:44
Table /SAPCND/CONDINDX is deleted, not copied
Table /SAPCND/CONDREF is deleted, not copied
Table /SAPCND/CONDRECS is deleted, not copied
/SAPCND/CC_EXCLUDE_TABLES executed 3( 0) entries copied
Exit program /SAPCND/CC_EXCLUDE_TABLES successfully executed 15:43:44
Unknown message with
/SAPCND/CC_GROUP_WS_AA executed 0( 0) entries copied
Runtime 0 seconds
Exit program /SAPCND/CC_GROUP_WS_AA successfully executed 15:43:45
ADDR_CLIENTCOPY_SELECT_TABLES executed 26( 0) entries copied
Runtime 1 seconds
Exit program ADDR_CLIENTCOPY_SELECT_TABLES successfully executed 15:43:47
EFG_FORM_CC_EXIT_BEFORE executed 0( 0) entries copied
Runtime 0 seconds
Exit program EFG_FORM_CC_EXIT_BEFORE successfully executed 15:43:48
Start of deletion methods for client 120
Start the deletion method for object FINB-TR-DERIVATION
End of deletion method of object FINB-TR-DERIVATION
Start the deletion method for object UCM003
End of deletion method of object UCM003
Start the deletion method for object /EACC/ARCHIVING
End of deletion method of object /EACC/ARCHIVING
Start the deletion method for object /EACC/JOURNALCC
End of deletion method of object /EACC/JOURNALCC
Start the deletion method for object /EACC/DERIVATION-1
End of deletion method of object /EACC/DERIVATION-1
Start the deletion method for object FINB-PERSIST
End of deletion method of object FINB-PERSIST
Start the deletion method for object FINB_GENERATOR
Deletion log for client 120, application 10
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application EA
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application UG
0 objects registered for deletion
No errors found in simulation mode
End of deletion method of object FINB_GENERATOR
Start the deletion method for object FINB_SBU_DUMMY
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo_RBD_00
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo_RBD_00
End of deletion method of object FINB_SBU_DUMMY
FINB_TR_CC_EXIT executed 0( 0) entries copied
Runtime 1 seconds
Exit program FINB_TR_CC_EXIT successfully executed 15:43:50
TPM_TRG_CCEXIT_REMOTE executed 0( 0) entries copied
Runtime 0 seconds
Exit program TPM_TRG_CCEXIT_REMOTE successfully executed 15:43:56
CLIENTCOPY_SELECT_TEXTTAB executed 3( 0) entries copied
Runtime 0 seconds
Exit program CLIENTCOPY_SELECT_TEXTTAB successfully executed 15:43:56
Table KX9RABA0000108 is deleted, not copied
Table TABADRH is deleted, not copied
Table TABADRS is deleted, not copied
Table TABADRSF is deleted, not copied
Table TABADRST is deleted, not copied
Table UCF001C is deleted, not copied
Table UCF001G is deleted, not copied
Table UCF001T is deleted, not copied
Table UCF0020 is deleted, not copied
Table UCF0021 is deleted, not copied
Table UCF0022 is deleted, not copied
Table UCF0023 is deleted, not copied
Table UCF002C is deleted, not copied
Table UCF002T is deleted, not copied
Table UCF0032 is deleted, not copied
Table UCF003C is deleted, not copied
Table UCF003G is deleted, not copied
Table UCF003T is deleted, not copied
Table UCF0040 is deleted, not copied
Table UCF0041 is deleted, not copied
Table UCF0042 is deleted, not copied
Table UCF0043 is deleted, not copied
Table UCF004C is deleted, not copied
Table UCF004T is deleted, not copied
Table UCF1000 is deleted, not copied
Table UCF1001 is deleted, not copied
Table UCF1002 is deleted, not copied
Table UCF2300 is deleted, not copied
Table UCF2301 is deleted, not copied
Table UCF2310 is deleted, not copied
Table UCF2311 is deleted, not copied
Table UCF3000 is deleted, not copied
Table UCF3001 is deleted, not copied
Table UCF3010 is deleted, not copied
Table UCF4000 is deleted, not copied
Table UCF4001 is deleted, not copied
Table UCF4002 is deleted, not copied
Table UCF5000 is deleted, not copied
Table UCF5001 is deleted, not copied
Table UCF5002 is deleted, not copied
Table UCF5010 is deleted, not copied
Table UCF600C is deleted, not copied
Table UCF6010 is deleted, not copied
Table UCF6020 is deleted, not copied
Table UCF6030 is deleted, not copied
Table UCF6050 is deleted, not copied
Table UCF6100 is deleted, not copied
Table UCF6110 is deleted, not copied
Table UCF6120 is deleted, not copied
Table UCF6130 is deleted, not copied
Table UCF6140 is deleted, not copied
Table UCF6150 is deleted, not copied
Table UCF6160 is deleted, not copied
Table UCF6170 is deleted, not copied
Table UCF6180 is deleted, not copied
Table UCF6200 is deleted, not copied
Table UCF620C is deleted, not copied
Table UCF620T is deleted, not copied
Table UCF6210 is deleted, not copied
Table UCF6300 is deleted, not copied
Table UCF6310 is deleted, not copied
Table UCF7100 is deleted, not copied
Table UCF7101 is deleted, not copied
Table UCF7102 is deleted, not copied
Table UCF7110 is deleted, not copied
Table UCF7300 is deleted, not copied
Table UCF7400 is deleted, not copied
Table UCF7410 is deleted, not copied
Table UCF7500 is deleted, not copied
Table UCF900C is deleted, not copied
Table UCF9010 is deleted, not copied
Table UCFE01T is deleted, not copied
Table UCFE020 is deleted, not copied
Table UCFE02T is deleted, not copied
Table UCFE03G is deleted, not copied
Table UCFE03T is deleted, not copied
Table UCFE04G is deleted, not copied
Table UCFE04T is deleted, not copied
Table UCFE050 is deleted, not copied
Table UCFE05G is deleted, not copied
Table UCFE05T is deleted, not copied
Table UCFE060 is deleted, not copied
Table UCFE06G is deleted, not copied
Table UCFE06T is deleted, not copied
Table UCFE070 is deleted, not copied
Table UCFE080 is deleted, not copied
Table UCFE081 is deleted, not copied
Table UCFI00C is deleted, not copied
Table UCFI10T is deleted, not copied
Table UCFI200 is deleted, not copied
Table UCFI210 is deleted, not copied
Table UCFT000 is deleted, not copied
Table UCFT001 is deleted, not copied
Table UCFT002 is deleted, not copied
Table UCFV000 is deleted, not copied
Table UCFV200 is deleted, not copied
Table UCFV201 is deleted, not copied
Table UCFV202 is deleted, not copied
Table UCFV20G is deleted, not copied
Table UCFV21G is deleted, not copied
Table UCFV21T is deleted, not copied
Table UCFV220 is deleted, not copied
Table UCFV22T is deleted, not copied
Table UCI1101 is deleted, not copied
Table UCI1201 is deleted, not copied
Table UCI2100 is deleted, not copied
Table UCL2011 is deleted, not copied
Table UCL201G is deleted, not copied
Table UCL201T is deleted, not copied
Table UCM0010 is deleted, not copied
Table UCM0011 is deleted, not copied
Table UCM0012 is deleted, not copied
Table UCM0013 is deleted, not copied
Table UCM0014 is deleted, not copied
Table UCM0015 is deleted, not copied
Table UCM0016 is deleted, not copied
Table UCM001T is deleted, not copied
Table UCM002C is deleted, not copied
Table UCM002T is deleted, not copied
Table UCM0030 is deleted, not copied
Table UCM0031 is deleted, not copied
Table UCM0032 is deleted, not copied
Table UCM0033 is deleted, not copied
Table UCM003C is deleted, not copied
Table UCM003T is deleted, not copied
Table UCM1000 is deleted, not copied
Table UCM1001 is deleted, not copied
Table UCM100G is deleted, not copied
Table UCM100T is deleted, not copied
Table UCM600C is deleted, not copied
Table UCM600T is deleted, not copied
Table UCMA100 is deleted, not copied
Table UCMA101 is deleted, not copied
Table UCMA10C is deleted, not copied
Table UCMA10T is deleted, not copied
Table UCMI100 is deleted, not copied
Table UCMI10C is deleted, not copied
Table UCMI10T is deleted, not copied
Table UCMI200 is deleted, not copied
Table UCMI210 is deleted, not copied
Table UCMI220 is deleted, not copied
Table UCMT010 is deleted, not copied
Table UCMT01C is deleted, not copied
Table UCMT01T is deleted, not copied
Table UCMT100 is deleted, not copied
Table UCMT10C is deleted, not copied
Table UCMT10T is deleted, not copied
Table UCMV01T is deleted, not copied
Table UCRX01C is deleted, not copied
Table UCRX02G is deleted, not copied
Table UCS0100 is deleted, not copied
Table UCS0102 is deleted, not copied
Table UCS0103 is deleted, not copied
Table UCS0104 is deleted, not copied
Table UCS0105 is deleted, not copied
Table UCS0106 is deleted, not copied
Table UCS0107 is deleted, not copied
Table UCS0108 is deleted, not copied
Table UCS010T is deleted, not copied
Table UCS0110 is deleted, not copied
Table UCS01A0 is deleted, not copied
Table UCS01A1 is deleted, not copied
Table UCS01A2 is deleted, not copied
Table UCS01A3 is deleted, not copied
Table UCS020T is deleted, not copied
Table UCT100G is deleted, not copied
Table UCT100T is deleted, not copied
Table UCT101C is deleted, not copied
Table UCT101T is deleted, not copied
Table UCT2001 is deleted, not copied
Table UCT200G is deleted, not copied
Table UCT200T is deleted, not copied
Table UCT2010 is deleted, not copied
Table UCT2011 is deleted, not copied
Table UCT2012 is deleted, not copied
Table UCT2013 is deleted, not copied
Table UCT2014 is deleted, not copied
Table UCT2015 is deleted, not copied
Table UCT2016 is deleted, not copied
Table UCT3000 is deleted, not copied
Table UCT300G is deleted, not copied
Table UCT4000 is deleted, not copied
Table UCT400G is deleted, not copied
Table UCT8000 is deleted, not copied
Table UCT800G is deleted, not copied
Table UCT8010 is deleted, not copied
Table UCT8011 is deleted, not copied
Table UCT8012 is deleted, not copied
Table UCT8013 is deleted, not copied
Table UCT8014 is deleted, not copied
Table UCT8015 is deleted, not copied
Table UCT8016 is deleted, not copied
Table UCT801G is deleted, not copied
Table UCT801T is deleted, not copied
Table /ISDFPS/CS_EXLST is convertible to the RFC system, field missing locally
Table /ISDFPS/CS_EXLST is deleted, not copied
Table AD01DLI is convertible to the RFC system, field missing locally
Table AD01DLI is deleted, not copied
Table ADRC is convertible to the RFC system, field missing locally
Table ADRC is deleted, not copied
Table AFFW is convertible to the RFC system, field missing locally
Table AFFW is deleted, not copied
Table AFIH is convertible to the RFC system, field missing locally
Table AFIH is deleted, not copied
Table AFKO is convertible to the RFC system, field missing locally
Table AFKO is deleted, not copied
Table AFPO is convertible to the RFC system, field missing locally
Table AFPO is deleted, not copied
Table AFRU is convertible to the RFC system, field missing locally
Table AFRU is deleted, not copied
Table AFRV is convertible to the RFC system, field missing locally
Table AFRV is deleted, not copied
Table AFVC is convertible to the RFC system, field missing locally
Table AFVC is deleted, not copied
Table ASMD is convertible to the RFC system, field missing locally
Table ASMD is deleted, not copied
Table AUFK is convertible to the RFC system, field missing locally
Table AUFK is deleted, not copied
Table AUFM is convertible to the RFC system, field missing locally
Table AUFM is deleted, not copied
Table CEZP is convertible to the RFC system, field missing locally
Table CEZP is deleted, not copied
Table CHVW is convertible to the RFC system, field missing locally
Table CHVW is deleted, not copied
Table CHVW_INC is convertible to the RFC system, field missing locally
Table CHVW_INC is deleted, not copied
Table CKIS is convertible to the RFC system, field missing locally
Table CKIS is deleted, not copied
Table CPZP is convertible to the RFC system, field missing locally
Table CPZP is deleted, not copied
Table CRFH is convertible to the RFC system, field missing locally
Table CRFH is deleted, not copied
Table EBAN is convertible to the RFC system, field missing locally
Table EBAN is deleted, not copied
Table EKBE is convertible to the RFC system, field missing locally
Table EKBE is deleted, not copied
Table EKBEH is convertible to the RFC system, field missing locally
Table EKBEH is deleted, not copied
Table EKEK is convertible to the RFC system, field missing locally
Table EKEK is deleted, not copied
Table EKES is convertible to the RFC system, field missing locally
Table EKES is deleted, not copied
Table EKET is convertible to the RFC system, field missing locally
Table EKET is deleted, not copied
Table EKKO is convertible to the RFC system, field missing locally
Table EKKO is deleted, not copied
Table EKPO is convertible to the RFC system, field missing locally
Table EKPO is deleted, not copied
Table EKRS is convertible to the RFC system, field missing locally
Table EKRS is deleted, not copied
Table EQBS is convertible to the RFC system, field missing locally
Table EQBS is deleted, not copied
Table EQUI is convertible to the RFC system, field missing locally
Table EQUI is deleted, not copied
Table EQUZ is convertible to the RFC system, field mWell.. those don't look like errors to me... depending on what copy profile you use SAP chooses what tables to copy and what tables to delete... so basically is just letting you know which tables are not to be copied across...
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/99/0a2a8e7e2511d2a6250000e82deaaa/content.htm
Regards
Juan -
I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manuthanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log 1
Time SAP instance Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP* SBAC BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
04523 Background Processor No. 008 SAP* 1 K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo 2655 SEL REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type Grp N variable message data
1 135000 g Database SQL Error BY 4 24909 SELREPOLOAD dbrepo 2655
Plesae suggest
RAJ -
Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client 200
Source Client 000
Copy Type Local Copy
Profile SAP_CUST
Status Cancelled
User SAP*
Start on 10.05.2008 / 14:53:00
Last Entry on 10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables 0 of 53448
- Copied Lines 0
Check System Log (SM21)
arnings and Errors
Table Name Component Package
/1FB/MD___3M0001 DDIC Error (See SE14)
/1FB/MD___3M0002 DDIC Error (See SE14)
/1FB/MD___3M0003 DDIC Error (See SE14)
/1FB/MD___3M0004 DDIC Error (See SE14)
/1FB/MD___3M0005 DDIC Error (See SE14)
/1FB/MD___3M0006 DDIC Error (See SE14)
/1FB/MD___3M0007 DDIC Error (See SE14)
/1FB/MD___3M0008 DDIC Error (See SE14)
/1FB/MD___3M0009 DDIC Error (See SE14)
/1FB/MD___3M000A DDIC Error (See SE14)
/1FB/MD___3M000B DDIC Error (See SE14)
/1FB/MD___3M000C DDIC Error (See SE14)
/1FB/MD___3M000D DDIC Error (See SE14)
/1FB/MD___3M000E DDIC Error (See SE14)
/1FB/MD___3M000F DDIC Error (See SE14)
/1FB/MD___3M000G DDIC Error (See SE14)
/1FB/MD___3M000H DDIC Error (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepakActually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak -
Local Client Copy Error : Completed w. Dictionary Errors
Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client 200
Source Client 100
Copy Type Local Copy
Profile SAP_CUST
Status Completed w. Dictionary Errors
User I998769
Start on 06.12.2009 / 12:47:59
Last Entry on 06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables 56872 of 58391
- Deleted Lines 5705995
- Copied Lines 5770444
Warnings and Errors
Table Name Component Package
A001 SD-MD-CM DDIC Error (See SE14)
A004 SD-MD-CM DDIC Error (See SE14)
A005 SD-MD-CM DDIC Error (See SE14)
A006 SD-MD-CM DDIC Error (See SE14)
A007 SD-MD-CM DDIC Error (See SE14)
A009 SD-MD-CM DDIC Error (See SE14)
A010 SD-MD-CM DDIC Error (See SE14)
A012 SD-MD-CM DDIC Error (See SE14)
A015 SD-MD-CM DDIC Error (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
Start of post-processing by application exits 13:57:48
Automatic postprocessing of client 200 was incorrect -> long text
Post-processing required for FINB_TR_CC_EXIT_TARGET
Validation/substitution: Programs should be regenerated
Selected tables : 58.391
Copied data in kBytes : 2.933.491
Deleted data in kBytes : 2.845.416
Program ended with error or warning, return code: W
Runtime (seconds) : 4.333
End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM -
Local client copy error - Table "BKPF" not edited due to excessive number
Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
AbdulHi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh -
Local Client Copy Error in Post-Processing
Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
AntarpreetHello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet
Maybe you are looking for
-
Better options than DAVE for Win NT connection?
I work for a small Mac design group in a large business environment. We store Quark, InDesign, Photoshop files on the companies Win NT Server. To do this they have installed DAVE because they said just using OS X's PC connect ability was causing the
-
After burning 500 pictures to a CD I found out that iPhoto created different files on the CD for all of the pictures that I edited. One file was original photos, another was modified photos and a third file was named data. I discovered this when I vi
-
I was able to display an image in a JApplet by creating another class extended from JPanel. When I try to display the same image in my JFrame based application, it fails, although the code compiles alright. Can anyone give me a snippet of code to inc
-
Error 4315 preventing me from backing up iTunes library
I have updated my dvd driver and tried everything I can think of, but every time I try to backup my iTunes library, I get unknown error 4315, the operation cancels itself and I am left with no backup and several disks that are now unusable. Any advic
-
Encoding Individual Strings with XML entities to replace "&", " ", etc.
We use templates to create XML files. The tags are in the templates and just the values get substituted in. Sometimes the variable value contains an ampersand or other XML-banned character. 1) Is there a simple method in the Java or Xerces class libr