Client copy for PLM

Hello Friends !!
Currently we are working on cProjects suite (cProjects + cFolders) 3.1, xRPM 2.0 on an ECC 5.0 system.
We want to migrate to ECC 6.0 with cProjects suite (cProjects + cFolders) 4.0, xRPM 4.0.
Our issue is that we dont know what to copy from this system to the next system.
Can anybody please suggest as to how can we copy customising data along with transaction data from cProjects and cFolders to ECC 6.0 system.
Will there be any issues in copy.
Regards;
Pratik

Not Possible

Similar Messages

Can we create a local client copy for the RFID Client in discovery Box

Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .

This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

Local client copy for delta changes

Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.

Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran

Client Copy for Solution Manager

Hello!
I need to know for the client copy phase , which clients do I need to copy from , for Solution manager 40 SR3.
Regards

ABAP
- SCC4: create a new client
- SCCL: copy client 000 with profile SAP_ALL to new client
- SCCL: copy client 001 with profile SAP_USER to new client
- PFCG: generate the profile for SAPJSF
JAVA
- Change the ABAP Client for UME with config tool
... reboot your server

Client copy for PI

I just did a installation of PI 7.10. This system will be used as the "Development" system.
Is there any advantage in having a separate client for integration server? i.e should I do a client copy or work in client 001 itself?
Thanks.

Hi Gokul,
Clients 000, 001 and 066 are standard clients that are pre-delivered by SAP. These clients are not supposed to be used in development, quality and production environments. So I would recommended to copy it and use for development.
Regards,
---Satish

Export/Import and Client Copy

Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
Rajesh

Hello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar

EBP Logical system after client copy

Hi Friends,
We did a client copy for our EBP system from the production system.
Now when I access the system to create invoice, the below error
prompted.
Error message
Error calling META BAPI META_CALCULATE_TAX
Error occurred calling META_BAPI_DISPATCH
In the debug mode for F/M META_BAPI_DISPATCH , I could see the logical system
still pointing to the live system.
So far Basis already changed all the logical system entries.
Hope someone could give some hint to solve the problem
Many thanks
Mike

Dinesh,
We are using SRM Standalone. No sync with backend product categories. In the debug mode I could see the system getting the logical system = "production sys" for business object BUS2205 (invoice).
Belief there is some setting for logical system still need tobe changed.
Hope you could give some hint.
Many thanks.
Mike.

PI 7.0, IDOC to IDOC scenario, Client Copy ?

Hi,
We are trying to setup a IDOC to IDOC scenario in our new PI System.
Do we have to do a client copy for all the clients assigned for logical systems in SCC4 ?
These systems are setup in SLD on our PI Server as techincal systems and business systems also.
These clients and logical systems are for our SAP R/3 systems on version 4.7.
thanks
Udai

Hi,
I was a going through a demo example in SAP Guide. It says that you have to do a client copy for an IDOC to IDOC scenario.
So i will probably explain with numbers in our system.
XI System -> Client 100, logical system name -> D11100
SAP R/3 System -> Client 210, Logical system name -> D01210
So from the documentation as it says, i did setup a logical system and client in SCC4 in the XI system for our SAP R/3 System( Client 210).
Now the documentation says i have to log into client 210 of our XI system and do a client copy. So i was not sure if i have to do a client copy.
Let me know if i am not clear.
thanks
Udai

Dump "conne_import_wrong_comp_type" during client copy

Hi gurus!!
Last week I tried to run a client copy with SAP_CUST profile but the next dump was generated:
Runtime Error CONNE_IMPORT_WRONG_COMP_TYPE
Exception CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to IMPORT object "TLINE".
What happened?
This is probably due to an error in the ABAP program.
When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
Error analysis
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure "READ_TEXTLINES" "(FORM)"
Since the caller of the procedure could not have expected this exception to occur, the running program was terminated.
The reason for the exception is:
When importing the object "TLINE", the component no. 1 in the dataset has a different type from the corresponding component of the target object in the program "SAPLSTXD".
The data type is "N" in the dataset, but "C" in the program.
I checked that the report SAPLSTXD had not been changed and I can't found the reason of the error.
Can anybody help me?
Thank you very much in advanced.
Edorta.

Hi nick
I have already checked the note and executed the corresponding report and it shows an incorrect text filtering with the information extracted from the dump.
I have eliminated this wrong text in STXL and rescheduled the client copy for toningth. Tomorrow we will see the results.
Thank you very much in advanced,
Edorta.

Can not perform local client copy

Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*.
Same is working fine at IDES server.
Please help
Thanks
Gaurav

Hi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM

System Landscape using multiple clients scenario for BW

Hi Friends,
I have a scenario where I want to use multiple BW clients based on single server.
I have made client copy of the development server and want to transport the objects
to the target clients.
I am aware that such a scenario works fine in R/3 and infact i have used it
.But in BW when i hit RSA1 I get an error message "you can only use client(010)"-my development client of which copy was made.
The client copy system is 102.
Now I read a thread on sdn which said change client entry in RSADMINA table .I changed it ,but I think its cross client table and hence RSA1 is neither workinging in client copy or the parent system.I reverted back entry in client 102 and saw that development client working again fine like before.(also RSADMINA) value changed in 010.
I have tried to fix it by creating appropriate mappings using SCC4/BD54/SALE/WE20/RZ10
.Also created mapping WE20 for Partner profile and assigned the logica system.
Is it possible to have such a system landscape?
Can anyone give some useful suggestions?

Hi..thanks to all of you....
I think this thing boils down to table RSADMINA where you maintain entry for your client.
The primary key there is 'Customizing ID' and when you specify there "BW" .You can't make another entry for another MANDT with another customizing id.
Whenever u login to any other client and you change entry of MANDT it is going to be reflected to all the clients and thats what is the issue.So you can't mantain mulitple entries as you can't enter two customizing ids. there.
Infact there are many reasons in the background as well which the sap note mentions like common number ranges..etc.
Lastly ..Ofcourse as Siggi said you can have another R/3 or CRM system etc on the same server but no two BW clients.I think SAP should not allow client copy for BW on the same server..it will help some bad efforts
Thanks for the support everyone.
Regards,
Rakesh
Edited by: Rakesh Kumar on Jun 15, 2009 12:08 PM

Client Copy and Configuration of Integration Server

Hi All,
We have PI 7.0 DEv(ABAP and JAVA) system installed on AIX 5.3 and configured client 150 as Integration Server.
Further we have an requirement for two more clients to be created by client copy
For example : Say 160 as Unit test and 170 for X.
1) Now my question is do we have to do a client copy with 150 as source or 000.
2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
Cheers
Deepu

hi,
>2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
no it is not possible to have more then one integration server (XI)
on one server
you need a new server if you want test environment etc.
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Client Copy - Sap Netweaver 7.3

Hi Folks,
I am working on SAP Netweaver release 7.3 and I'd like to know if there is any best practices to perform client copy for this new version.
Tks a lot Mari

Hi,
Here it is... http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTSCCO/BCCTSCCO.pdf
Good luck !!
Thanks,
Siva Kumar

Creation of production client copy

Hai,
What are the prerequisites for creation of client copy for production?
This is in regard to eleminate the default company codes existing in 000 client. In case if we opt for sap_cust the entire company code is copied.
Thanks
Hari Mohan

Hi,
you can not eliminate default company code while copying the client from 000 using SAP_CUST profile.
check SAP Note 550894 - CC-ADMIN: Setting up a new client
Note 552711 - FAQ: Client copy
regards,
kaushal

How i can create client copy

how i can create client copy .
pls tell me step by step procedure to create client.
and client copy.

For client copy login to source client with t-code scc4 and create the new client. Provide the details for new clients.
Create the new logical client for new client.
check for the the profile parameter
login/no_automatic_user_sapstar = 0
login to destination client with sap* and p/w as pass.
run t-code sccl for local client copy with sap_all.
Kindly provide the points if issue solve.
Regards,
Rohit mehta

Client copy for PLM

Similar Messages

Maybe you are looking for