Client Copy for Solution Manager

Hello!
I need to know for the client copy phase , which clients do I need to copy from , for Solution manager 40 SR3.
Regards

ABAP
- SCC4: create a new client
- SCCL: copy client 000 with profile SAP_ALL to new client
- SCCL: copy client 001 with profile SAP_USER to new client
- PFCG: generate the profile for SAPJSF
JAVA
- Change the ABAP Client for UME with config tool
... reboot your server

Similar Messages

How to copy SAP Solution Manager?

Hi experts,
I'm searching a manual, which explains a system copy for Solution Manager 7.0 EhP 1. I can't find such a document in the SAP Marketplace. Can anybody help me?
Thanks and best regards
Max

Hello Max,
Please see the following URLs/Notes which will explain on system copy for SOLMAN.
http://www.service.sap.com/instguides
-> SAP Components -> SAP Solution Manager --> Select the relevant release and you will find installtion, upgrade
and configuration guides.
Please refer to the below link for more infromation.
http://service.sap.com/solutionmanager
Please also check if below notes:
659509 ORACLE: Special installation and system copy (point 3:Required documentation)
492051: Moving solutions to a new Solution Manager
Thanks,
Mark

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

Temporary license for Solution Manager?

Hello all,
I have installed Solution Manager 7.0 on Linux /Oracle system. The license is getting ready to expire. Is it possible to get a temporary license for Solution Manager?
TIA

you already have a temporary license... and it is about to expire, you cannot install a temporary license on top of an existing one.
you will need to ask your super user to request a license key for you... or ask him to add authorization to do so.
unless you hack your license, there are no other way.
note that you can still login into client 000 with user SAP*, even after license expiration.

What are installations material for Solution Manager 7.0 EHP 1

hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..

https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Can we create a local client copy for the RFID Client in discovery Box

Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .

This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

Local client copy for delta changes

Hello Support,
We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
So, my question here is
1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
Thanks,
Uday.

Hello Uday,
SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
Regards,
Sreejith Rajashekaran

Is it feasible to create odataservice for Solution manager using UI5 technology?

Hi Experts,
Is it possible to create new odata service for solution manager, such as Viewing BPML(Business process master list).
If yes, kindly share the steps/way to achieve.
Regards,
Asmita Ranade

Julie,
same answer here which you already got in the two threads you opened on the MOS communities: No, not really since you want to do it in Answers. It *would* be possible in the RPD, but quite pointless to instantiate an RPD variable just to instantiate some literal code.

BI content for Solution Manager 4.0

Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.

There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM                   BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400                DB400 Data
0SM_DSWPBI_DBADA               Adabas Data
0SM_DSWPBI_DBDB2               DB2 Data
0SM_DSWPBI_DBINF                Informix Data
0SM_DSWPBI_DBMSS              SQL Server Data
0SM_DSWPBI_DBORA              Oracle Data
0SM_DSWPBI_MODUL              Module Data
0SM_DSWPBI_PERF                 Performance Data
0SM_DSWPBI_SERVER            Server Data
0SM_DSWPBI_SYSDATA          System Details Data
0SM_DSWPBI_SYSTEM            System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider.

Process for applying for Solution Manager Key?

I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager key

Balaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch

Third-party tools for solution manager

Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
Tim

Hi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji

Language Import for Solution manager

Hello All,
I have a simple query regarding solution manager 7.0 language import using SMLT.
I have a requirement where my Poland users need to use solution manager in polish language.
The problem I am facing is that I am not able to find POLISH language import on service market place.
Could some one please help me find the polish language import for solution manager 7.0.
Eagerly awaiting your reply.
Regards,
Gurudath Pai

Dear customer
Polish isn't a supported language. Check service.sap.com/pam
Chinese      Released      16.12.2005      Released      16.12.2005
English      Released      16.12.2005      Released      16.12.2005
French      Released      16.12.2005      Released      16.12.2005
German      Released      16.12.2005      Released      16.12.2005
Hebrew      Released      16.12.2005      Released      16.12.2005             Comment
Japanese Released      16.12.2005      Released      16.12.2005
Korean      Released      16.12.2005      Released      16.12.2005
Portuguese Released      16.12.2005      Released      16.12.2005
Russian      Released      16.12.2005      Released      16.12.2005
Spanish      Released      16.12.2005      Released      16.12.2005

HTTP Connection for Solution manager

Dear Experts,
SAP support team asked to create a http connection for solution manager for service check.We already created a R/3 connection for solution manager.why they are asking for HTTP connection? Really they required HTTP connection ?,Is they are any problem with this type of connections.What are the transaction codes which are not run in SAP GUI. Please clarify my doubts.
Thanks and regards,
Patan Thavaheer.

Hi Patan,
Solution Manager transaction codes open in http browser. You can check the behaviour yourself by making a login to solution manager and execute transaction code solman_setup.
For SAP support to open http browser within remote support, they need to have http connection opened along with HTTP url maintained.
Refer to the SAP help link above for the procedure.
Hope this helps.
Regards,
Deepak Kori

Client Copy for Solution Manager

Similar Messages

Maybe you are looking for