Client copy
hi,
while doing local client copy in ECC6.0 its asking to create an RFC for Financial Basis component
Fine,
So you have to copy the client from 001 , copy the profiles - sap_cust,sap_user.
since u r installed ABAP + JAVA , you have to copy only from 001, this client only have the content of java users eg (j2ee_admin).
You can also chk, if ur login into client 000 , no j2ee_admin user will there.
Regards
MLN
Similar Messages
-
Logical System and Client copy
Hi Gurus ,
I just now finished ECC 6.0 successfully , I want to take the client copy . But i hacve one doubt , In client creation one TAB logical system is there , Kindly advice me how to create Logical system and steps .
Regards
SelvanHi Manjula ,
Below i mentioned the full detail about the error .
RFC destination for client copy in systems with Financials Basis (FINBASIS) component.
The system could not find any suitable RFC destination for processing for client 000. This note also appears if an RFC destination was found but this does not work. o RFC destination: FINBTR@ID3CLNT000 o Error text: Error during the retrieval of the logon data Proceed as follows to eliminate this error:
1. Start the wizard to create a new RFC connection or perform the following steps manually: 1. Create an RFC destination with the target ZK>source client of client copy (in this case 000).
2. Check whether the RFC destination works in transaction SM59. To avoid errors when assigning the password or the authorizations of the RFC user, use the authorization test Test -> Authorization.
3. Enter the RFC destination: - Transaction: FINB_TR_DEST (Destinations for Transport Methods of the Financials Basis) - Client: 000
4. Start the client copy again.
Kindly advice me
selvan -
I had a problem with my List Cube Transaction and for that reason, I had a look at the Infoprovider and also the Data Sources.
When tried to execute the infoproviders in LISTCUBE, the following messages are being displayed in BWT system:
1. Error reading the data of InfoProvider ZIP_RC_01
2. There is still no data source assigned to VirtualProvider ZIP_RC_01
But, when executed the same in BWD, then it is working fine.
I have checked the Data Sources in the R/3 Dev system and the DS has no problem. But, when I check the DS in the R/3 Prod (SS in BWT system), the following error message is displayed in the status bar:
"DataSource Z_IP_RC_DS_1 is not defined in the source system"
I thought, as the system says the Source system is not available, hence the problem in LISTCUBE and thought if we transport the DS again and then replicate in BW, then our problem would be resolved.
But, seems that even though the source system says "PRD300", if I look at SM59 it actually points to our QAS system. It says PRD300 because BWT is a copy down from BWP, and that's the source system we use - in other words the logical name is the same, but the actual servers are different.
In any case, the datasource is transported to our QAS enviroment.
So, once we do a client copy from Prod to Test, even the source systems get copied. If yes, then does it really affect in case of replications and transports???
I am really confused in this part...please explain.
Thanks & RegardsHi,
It looks like the basis team, or whoever performed the Copy from production to QA box hasn't finished all the necessary Steps :
Main transaction to know:
SSC4 -> To create new client
SCCL -> Client copy within local system
SCC9 -> remote client copy
SCC3 -> display client copy log
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
http://www.sap-basis-abap.com/bc/client-copy-from-production-to-quality-server-to.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci552257,00.html
Probably sounds like transaction BDLS hasn't been done. -
Client copy with configuration data in R/3. Is there any effect on EBP sys
Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advancewaiting online
-
Unable to log in to newly create client copy
I 'm attempting to create a new client from a newly installed ECC 6.0 IDES system. I go into SCC4 and create a new lient '200' and log off.
I try to log in to client 200 using sap* and pass and get wrong username or password error.
I can see the client listed in scc4, but can't log into it.
Any ideas?
BobHello,
Having the previous question answered helped alot, but I do have another question:
Can I put the client copy on a different drive than the original?
I have SAP installed on the E: drive and would like to place the new copy client on the F: drive, can I do that?
Bob -
Dears,
Today I am going to do remote client copy from PRD to QAS.
For it yesterday i scheduled Test run in simulation mode.As i am having two CPU for both Dev and PRD so I scheduled it with 6 Parallel Processes.
But my Test run failed with errors:
Copy Type Remote copy
Test Run
Profile SAP_ALL
Status Ended with Errors
User SAP*
Start on 14.08.2008 / 01:30:54
Last Entry on 14.08.2008 / 05:57:54
Statistics for this Run
- No. of Tables 30,806 of 30,808
- Deleted Lines 15
- Copied Lines 72748,776
Warnings and Errors
Table/Object Component Error
BKPF FI Read or Conversion Error
BSIS FI Read or Conversion Error
Thus showing read or Conversion Error in these two tables.
In System log of source system I also see these error:
ORA-01652 unable to extend temp segment by 2560 in PSAPTEMP
Database Error 1652 at SEL access to table BKPF.
Database Error 1652 at SEL access to table BSIS.
Please suggest how to resolve the issue.
Shivam
Edited by: Shivam Mittal on Aug 14, 2008 6:08 AMHello Shivam
How is your remote copy going on?
Did you increase the size of psap temp in order to carryon with the copy?
Your Source system is PRD system.Are you doing this copy while users are using the PRD system.
If not then this may not be result of client copy? or
if no user is logged in in your PRD system,You have to decide if this is due to client copy.
Let me know what corrective measure taken by you to completed the remote client copy?
normally we dont get this dump in the source system but I have psaptemp around 30 GB or more in al my systems so may be this might have not surfaced in my environment.
Thanks
Amit -
Remote Client Copy - Ended in Erros
Hi Friends,
We recently performed a Remote client copy. What we normally do is we restore an latest offline backup of the Prod into an instance built exclusively for performing client copies into our QA system.
So if our actual PROD is ABC ( production ), the replica system is ADC. We restore latest backup onto ADC. Then from ADC we do a client copy onto AQC ( Quality ). We have n number of clients in AQC. When copying into a particular client we are facing this problem of 3 tables not being able to get copied. They are BKPF,LTAK and SOST. It happened twice that the Remote client ended with errors.
It says "Read or conversion error". The detailed error looks like below ;
TAB_COPY_R_CONTINUE LTAK WITH KEY:
I01 0000066362
Read or conversion error system: ADCT500 table: LTAK
ERROR: Internal error when inserting in table: LTAK
Internal error: 1,262,713 65,536 VERIFY_CNT
Process 00001 has copied data 25.02.2010 18:04:16
Read or conversion error system: ADC500 table: BKPF
Process 00002 has copied data 25.02.2010 19:09:00
Start: Recopy errors 25.02.2010 19:09:02
TAB_COPY_R_CONTINUE BKPF WITH KEY:
2100 5100019665 2008
Read or conversion error system: ADC500 table: BKPF
ERROR: Internal error when inserting in table: BKPF
Internal error: 6,948,636 1,777,664 VERIFY_CNT
Read or conversion error system: ADC500 table: LTAK
TAB_COPY_R_CONTINUE SOST WITH KEY:
OTF 34 000000019247
Read or conversion error system: ADC500 table: SOST
ERROR: Internal error when inserting in table: SOST
Internal error: 2,594,254 180,224 VERIFY_CNT
We approached SAP and they asked to do a DB reorg, run update statistics on both source and target and then re run the client copy.
Well DB reorg is a big activity so we just updated the statistics and ran again the "recopying errors" but still it is the same problem.
Can anybody please suggest something. Thank you.
regards
Vinod KHi Friends,
My apologies for coming back to you guys so late. I kind of was lost to find a solution for this.
Hi Sanujit,
The database logs dont indicate anything at all about this error or i am not able to locate them.
Rajesh,
There was a table comparison done for these tables properties in both source and target and everything looked ok and confirmed by the application.
At this moment we have anyway decided to go a fresh client copy again as lot of time has already passed and there would be differences in source and target tables.
But anyway could you please tell me the procedure to transport tables between source and target systems?
Hi Anil,
SAP iS ECC 6.0 and Oracle is 10.2.0.4.0
Thanks again for your time and pateince.
Regards
Vinod K -
Remote client copy performance
Hello experts,
I need an opinion on following possibilities that could speed up remote client copy:
Increasing maximum number of processes for parallel processing in dialog mode?
Increasing the update processes?
Decreasing the undo retention from default 900 seconds to 600 seconds (Oracle) ?
Increase the number of redo log files?
An opinion or any other insights would be highly appreciated.
Thank you,
RohitWell, the answer is maybe.
You did not supply any information about your run and your system, how can we give you good advice? Any of your proposals might speed up the copy process, but we cannot tell (well decreasing the undo retention and changing the update work processes will not change much). If your hardware (cpu/disk/network) is not exhausted, then increase the number of parallel processes.
Besides that these notes contain good hints regarding copy speedup:
[489690 - CC INFO: Copying large production clients|https://service.sap.com/sap/support/notes/489690]
[446485 - CC-ADMIN: Special copying options|https://service.sap.com/sap/support/notes/446485]
Cheers Michael -
Hi,
I am doing remote client copy from (Development Server - ECD 140) to
our (Sandbox System - E6S 150) and the client copy keeps failing. I get
the below error message. Please advise what is the solution to this
problem? I am also copying the log file of the remote client copy below
Error Message:
Change documents are not copied
3 Tables cannot be converted
Critical differences: Missing tables: 125
Log file of remote client copy below
Target Client
150
Source RFC Dest.:
ECDCLNT140
System Name:
ECD
Client in Source System
140
Copy Type
Remote copy
Profile
SAP_ALL
Status
Cancelled. See Log
User
SAP*
Start on
08.05.2010 / 17:05:18
Last Entry on
08.05.2010 / 17:13:36
Last Action:
RFC DDIC System Comparison
Statistics for this Run
- No. of Tables
0 of 56508
- Copied Lines
0
Warnings and Errors
Table Name
Component
Package
/SAPTRX/EXT_AOT
Table Def. Missing Locally
/SAPTRX/EXT_EE
Table Def. Missing Locally
/SAPTRX/EXT_ETY
Table Def. Missing Locally
/SAPTRX/EXT_EVT
Table Def. Missing Locally
/SAPTRX/EXT_FLD
Table Def. Missing Locally
/SAPTRX/EXT_FLDS
Table Def. Missing Locally
/SAPTRX/EXT_FLDT
Table Def. Missing Locally
/SAPTRX/EXT_PAR
Table Def. Missing Locally
A850
Table Def. Missing Locally
A851
Table Def. Missing Locally
A852
Table Def. Missing Locally
A900
Table Def. Missing Locally
A901
SD-MD-CM
Different Field Names
A902
Table Def. Missing Locally
A903
Table Def. Missing Locally
A904
Table Def. Missing Locally
A909
Table Def. Missing Locally
A910
Table Def. Missing Locally
A911
Table Def. Missing Locally
A912
Table Def. Missing Locally
A933
Table Def. Missing Locally
A935
Table Def. Missing Locally
A942
Table Def. Missing Locally
A943
Table Def. Missing Locally
A944
Table Def. Missing Locally
A945
Table Def. Missing Locally
A946
Table Def. Missing Locally
A947
Table Def. Missing Locally
A948
Table Def. Missing Locally
A949
Table Def. Missing Locally
A952
Table Def. Missing Locally
A953
Table Def. Missing Locally
A954
Table Def. Missing Locally
A955
Table Def. Missing Locally
A956
Table Def. Missing Locally
A957
Table Def. Missing Locally
A958
Table Def. Missing Locally
A961
Table Def. Missing Locally
A962
Table Def. Missing Locally
A963
Table Def. Missing Locally
A964
Table Def. Missing Locally
A965
Table Def. Missing Locally
A966
Table Def. Missing Locally
A967
Table Def. Missing Locally
A981
Table Def. Missing Locally
A982
Table Def. Missing Locally
A983
Table Def. Missing Locally
A984
Table Def. Missing Locally
A985
Table Def. Missing Locally
A986
Table Def. Missing Locally
A987
Table Def. Missing Locally
A999
Table Def. Missing Locally
AFRU
PP-SFC-EXE-CON
Field missing locally
B901
Table Def. Missing Locally
B902
Table Def. Missing Locally
B903
Table Def. Missing Locally
B905
Table Def. Missing Locally
B906
Table Def. Missing Locally
B907
Table Def. Missing Locally
B950
Table Def. Missing Locally
B997
Table Def. Missing Locally
B998
Table Def. Missing Locally
B999
Table Def. Missing Locally
K9RECD1400004
Table Def. Missing Locally
KOTD601
Table Def. Missing Locally
KOTD602
Table Def. Missing Locally
KOTD603
Table Def. Missing Locally
KOTE901
Table Def. Missing Locally
KOTE902
Table Def. Missing Locally
LIKP
LE-SHP
Field missing locally
S001BIW1
LO-LIS-DC
Table has convertible differen
S001BIW2
LO-LIS-DC
Table has convertible differen
Z864DATA
Table Def. Missing Locally
Z864DIRECT
Table Def. Missing Locally
Z864INVOICETYPES
Table Def. Missing Locally
Z864ORDERTYPES
Table Def. Missing Locally
Z864RATES
Table Def. Missing Locally
Z864YENADJUST
Table Def. Missing Locally
ZBJOB_EMAIL
Table Def. Missing Locally
ZCSTMATNRLBL
Table Def. Missing Locally
ZCUSTJULIAN
Table Def. Missing Locally
ZFEDEX_COUNTRY
Table Def. Missing Locally
ZFEDEX_INBOUND
Table Def. Missing Locally
ZFEDEX_OUTBOUND
Table Def. Missing Locally
ZFI_EXCG_CURR
Table Def. Missing Locally
ZGBASE
Table Def. Missing Locally
ZGPRICE
Table Def. Missing Locally
ZHIPVALUES
Table Def. Missing Locally
ZIDOCDSS
Table Def. Missing Locally
ZLABOR_TIME
Table Def. Missing Locally
ZMACH_TIME
Table Def. Missing Locally
ZMM_GIMS_MTART
Table Def. Missing Locally
ZMM_WM_MAP
Table Def. Missing Locally
ZNGK_WORKFLOW
Table Def. Missing Locally
ZPPCRT
Table Def. Missing Locally
ZPPERRORLOG
Table Def. Missing Locally
ZPPEXPIRE
Table Def. Missing Locally
ZPPJOBMAP
Table Def. Missing Locally
ZPPNUM
Table Def. Missing Locally
ZPPWRKMAP
Table Def. Missing Locally
ZPP_COMP
Table Def. Missing Locally
ZPP_EXT_SOP
Table Def. Missing Locally
ZPP_MV_IN
Table Def. Missing Locally
ZPP_MV_OUT
Table Def. Missing Locally
ZPP_OPID_HU
Table Def. Missing Locally
ZPP_SOP_PBCR1
Table Def. Missing Locally
ZPP_SOP_PBCR3
Table Def. Missing Locally
ZPP_SOP_PBCR5
Table Def. Missing Locally
ZQM_CUST_BATCH
Table Def. Missing Locally
ZSD_NAPA
Table Def. Missing Locally
ZSD_PRICE_BLOCK
Table Def. Missing Locally
ZSD_SHPCND
Table Def. Missing Locally
ZSHIPVALUES
Table Def. Missing Locally
ZTABMAINT
Table Def. Missing Locally
ZUPS_COUNTRY
Table Def. Missing Locally
ZUPS_FEDEX_LOG
Table Def. Missing Locally
ZUPS_INBOUND
Table Def. Missing Locally
ZUPS_OUTBOUND
Table Def. Missing Locally
ZWMPACK2LABEL
Table Def. Missing Locally
ZWM_CUST_HU
Table Def. Missing Locally
ZWM_HU_HDR
Table Def. Missing Locally
ZWM_HU_ITEM
Table Def. Missing Locally
ZWM_IB_GR
Table Def. Missing Locally
ZYA1
Table Def. Missing Locally
ZYA2
Table Def. Missing Locally
ZYA3
Table Def. Missing Locally
ZYA5
Table Def. Missing Locally
ZYADDER
Table Def. Missing Locally
ZYATYPES
Table Def. Missing Locally
ZYAVG
Table Def. Missing LocallyI ran the report "RSCLICHK" on the target client and below are the results. There are some table differences. How do i syncronnize the tables so that i can successfully complete the remote client copy? Do i make the table changes on the source system or the target system? I was also told that the table changes will take days to complete. What is the most efficient way to syncronize the tables?
AFRU Field Missing Local PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
S001BIW1 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW1 * SIS: Customer Statistics
S001BIW2 Convertable LO-LIS-DC MCS SAP TRANSP S001BIW2 * SIS: Customer statistics
A901 Fields Missing <-> SD-MD-CM VKOK VLOVELACE TRANSP Sales org./Distr. Chl/Division/Cust.group/PH2/Price grp/Pric
LIKP Field Missing Local LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
/SAPTRX/EXT_AOT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EE Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_ETY Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_EVT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLD Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDS Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_FLDT Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
/SAPTRX/EXT_PAR Table Missing Local SCM-EM /SAPTRX/ATIF TRANSP
A850 Table Missing Local SD-MD-CM VKOK TRANSP
A851 Table Missing Local SD-MD-CM VKOK TRANSP
A852 Table Missing Local SD-MD-CM VKOK TRANSP
A900 Table Missing Local SD-MD-CM VKOK TRANSP
A902 Table Missing Local SD-MD-CM VKOK TRANSP
A903 Table Missing Local SD-MD-CM VKOK TRANSP
A904 Table Missing Local SD-MD-CM VKOK TRANSP
A909 Table Missing Local SD-MD-CM VKOK TRANSP
A910 Table Missing Local SD-MD-CM VKOK TRANSP
A911 Table Missing Local SD-MD-CM VKOK TRANSP
A912 Table Missing Local SD-MD-CM VKOK TRANSP
A933 Table Missing Local SD-MD-CM VKOK TRANSP
A935 Table Missing Local SD-MD-CM VKOK TRANSP
A942 Table Missing Local SD-MD-CM VKOK TRANSP
A943 Table Missing Local SD-MD-CM VKOK TRANSP
A944 Table Missing Local SD-MD-CM VKOK TRANSP
A945 Table Missing Local SD-MD-CM VKOK TRANSP
A946 Table Missing Local SD-MD-CM VKOK TRANSP
A947 Table Missing Local SD-MD-CM VKOK TRANSP
A948 Table Missing Local SD-MD-CM VKOK TRANSP
A949 Table Missing Local SD-MD-CM VKOK TRANSP
A952 Table Missing Local SD-MD-CM VKOK TRANSP
A953 Table Missing Local SD-MD-CM VKOK TRANSP
A954 Table Missing Local SD-MD-CM VKOK TRANSP
A955 Table Missing Local SD-MD-CM VKOK TRANSP
A956 Table Missing Local SD-MD-CM VKOK TRANSP
A957 Table Missing Local SD-MD-CM VKOK TRANSP
A958 Table Missing Local SD-MD-CM VKOK TRANSP
A961 Table Missing Local SD-MD-CM VKOK TRANSP
A962 Table Missing Local SD-MD-CM VKOK TRANSP
A963 Table Missing Local SD-MD-CM VKOK TRANSP
A964 Table Missing Local SD-MD-CM VKOK TRANSP
A965 Table Missing Local SD-MD-CM VKOK TRANSP
A966 Table Missing Local SD-MD-CM VKOK TRANSP
A967 Table Missing Local SD-MD-CM VKOK TRANSP
A981 Table Missing Local SD-MD-CM VKOK TRANSP
A982 Table Missing Local SD-MD-CM VKOK TRANSP
A983 Table Missing Local SD-MD-CM VKOK TRANSP
A984 Table Missing Local SD-MD-CM VKOK TRANSP
A985 Table Missing Local SD-MD-CM VKOK TRANSP
A986 Table Missing Local SD-MD-CM VKOK TRANSP
A987 Table Missing Local SD-MD-CM VKOK TRANSP
A999 Table Missing Local SD-MD-CM VKOK TRANSP
B901 Table Missing Local SD-MD-CM VKOK TRANSP
B902 Table Missing Local SD-MD-CM VKOK TRANSP
B903 Table Missing Local SD-MD-CM VKOK TRANSP
B905 Table Missing Local SD-MD-CM VKOK TRANSP
B906 Table Missing Local SD-MD-CM VKOK TRANSP
B907 Table Missing Local SD-MD-CM VKOK TRANSP
B950 Table Missing Local SD-MD-CM VKOK TRANSP
B997 Table Missing Local SD-MD-CM VKOK TRANSP
B998 Table Missing Local SD-MD-CM VKOK TRANSP
B999 Table Missing Local SD-MD-CM VKOK TRANSP
K9RECD1400004 Table Missing Local CO-PA KEG0 TRANSP
KOTD601 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD602 Table Missing Local SD-MD-CM VKOK TRANSP
KOTD603 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE901 Table Missing Local SD-MD-CM VKOK TRANSP
KOTE902 Table Missing Local SD-MD-CM VKOK TRANSP
Z864DATA Table Missing Local ZDEV TRANSP
Z864DIRECT Table Missing Local ZDEV TRANSP
Z864INVOICETYPES Table Missing Local ZDEV TRANSP
Z864ORDERTYPES Table Missing Local ZDEV TRANSP
Z864RATES Table Missing Local ZDEV TRANSP
Z864YENADJUST Table Missing Local ZDEV TRANSP
ZBJOB_EMAIL Table Missing Local ZDEV TRANSP
ZCSTMATNRLBL Table Missing Local ZDEV TRANSP
ZCUSTJULIAN Table Missing Local ZDEV TRANSP
ZFEDEX_COUNTRY Table Missing Local ZDEV TRANSP -
Hi All
am performing remote client copy through scc9, created RFC & tested connection,
this server is not in the transport landscape.
when i execute scc9 and select profile SAP_ALL from target system (Production server) it runs for 5-7 mins and ends with message as "The client copy you started has terminated Tables cannot be converted.
should the users on Production server to be locked.
here is the logs in SCC3:
Client in Source System 500
Copy Type Remote copy
Profile SAP_ALL
Status Cancelled. See Log
User MODI_SUPER
Start on 31.08.2009 / 16:47:19
Last Entry on 31.08.2009 / 16:50:00
Last Action: RFC DDIC System Comparison
Statistics for this Run
- No. of Tables 0 of 53521
- Copied Lines 0
Warnings and Errors
Table Name Component Package
A543 Table Def. Missing Locally
A544 Table Def. Missing Locally
A800 Table Def. Missing Locally
A950 Table Def. Missing Locally
A960 Table Def. Missing Locally
A961 Table Def. Missing Locally
ZCOM Table Def. Missing Locally
ZCSKS Field missing locally
ZEMAIL Table has Incompatible Fields
ZLR_DTL Field missing locally
ZMM_RGP_SLNO Different Field Names
ZPM_CALIBRATION Field missing locally
ZSDD Table not ConvertibleHi Ashun8
Please not be in rush as your SD & MM consultant need to testing some scenarior on sandbox.
As being Basis expert! you should have many comprisions including patch level on both server before initiate the Remote Client Copy.
I will prefer to do the system copy instead the Remote Client copy without downtime on PRD server.
Regards
Anwer Waseem
SAP NetWeaver Basis -
Remote client copy (SCC9) runs a very long time!
remote client copy (SCC9) runs a very long time!
how to do it quickly process?
(eg use imp and exp-oracle tool, as it can be done to understand what the SAP data has been copied and are now in a different location, for Developers)scn001 wrote:
remote client copy (SCC9) runs a very long time!
> how to do it quickly process?
> (eg use imp and exp-oracle tool, as it can be done to understand what the SAP data has been copied and are now in a different location, for Developers)
Hi,
You can export the client, as well but it will take long time too, depended to your client size. Please note that client copy operation should be performed by standard SAP client management tools, such as client export/import or remote copy.
Ask this question to SAP support first. Technically, you can choose many ways to copy a SAP client, but as far as I know that SAP will not support you (such as errors you faced during the client export/import or the problems related by the copy operation), if you use any other 3rd party tool while for the client copy purposes.
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 30, 2011 10:57 AM -
Remote client copy fails.
Remote client copy fails.
The error message and info is given below. Help me to proceed.
Client copy
The client copy you started has terminated
Client Copy could not start because of Repository differences
Diagnosis
The table definitions differ between the systems. These differences mean that a copy of the data can cause a data loss and system inconsistencies. Differences occur when further developments were not transported or were copied between different maintenance levels.
Procedure
Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level.
It is observed that some tables are missing in the target system. How do I copy the table structures to the target system?
Thanks in advanceHello Ashraf,
There are repository differences between you source and traget system.
If you want to get the list of repository differences, then run a RFC check before you execute remote clinet copy.
You have to then remove these repository differences before you start with the remote client copy.
to remove the difference you have to:
"Transport all the developments of table structures between the systems using the Transport Organizer and bring your system to the same development level" as mentioned above
I would recommend you to go for Export / Import rather than Remote client copy.
There are several advantages of export import method over remote clinet copy
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i> -
Hi Guys,
We have made a client copy of the back-end system of SRM (SRM 5.0). Only the back-end and not SRM has been copied.
After replication all the master- and customizing data again to SRM from the 'new' back-end I have found an issue with updating the suppliers.
It seems that I can not remove old business partners from SRM with BUPA_TEST_DELETE if these are used already in SC's. However the new copy of the back-end system has completely different suppliers we need to use in SRM. This causes for an inconsistency with the supplier numbers, as we want to keep the R/3 numbers in SRM.
Does anyone has a good idea how to proceed? That is, how can I remove the business partners (suppliers) in SRM which were used before the client copy of R/3, so that I will be able to completely get all the relevant 'new' vendors from the R/3 system after the client copy.
When I execute BUPA_TEST_DELETE it will end up in error saying the suppliers can not be removed. Do I need to archive all the old documents (SC & PO) before I can remove all vendors in SRM, or is there a way to force the removal of all the business partners from before the back-end client copy?
Thx.
SkanderHi,
I already figured out how to solve the issue.
For anyone who wants to know how to:
-First clear the vendor groups in the vendor hierarchy; do not renove the root node
-Then run BBPGETVD which will get you the new vendors from the back-end; for me only role LF for suppliers.
-Then run BBPUPDVD which will update all the fields for the old business partner numbers in SRM which were used in documents, and replicated from the old back-end system.
In my case I had to play a litlebit with the setting 'only creditors', to update BP numbers which were not suppliers in the new back-end.
After performing these steps everything should be fine.
So it's perfectly possible to make a client copy of only the back-end system without copying SRM (in the classic scenario that is).
Rgds,
Skander -
Logical system name to be updated while client copy--URGENT HELP REQUIRED
Hello All,
I have a query regarding the "Logical System name" updation during Client copy.
When we make a client copy(SRM Masters) for the Production system(SRM),the Old Logical system name for backend(which is attached to the SRM masters) gets copied to the new Client (Copy) which needs to be updated.
There is a std transaction BDLS through whcih w e can change the current Logical system name to a new one but this seems to work fine for System copy but not for Client copy.
So when i make a client copy of SRM masters for Production system,is there any other std way wherein i can change the "Logical system name " for the backend or do i have to write a CUSTOM program wherein entries for the Backend Logical system name in tables like CRMMLSGUID will be updated with the new Logical system name?
Any help on this is appreciated.
Thanks & Regards,
Disha.Disha,
Yes, I did it twice and it worked fine.
The R/3 GUID is sent by the OLTP system (R/3) in R/3 message header.
SRM checks this GUID in CRMMLSGUID table.
If is not the same one, then replication process fails.
The only solution I found was to delete this entry. It is automatically recreated with the new GUID with the next replication, with FM CRMT_OLTP_LOGSYS1, called in BAPI_CRM_SAVE.
Look at OSS note 588701 & 765018 for deletion of CRMMLSGUID.
The issue is exactly ours: around system/client copy.
In an CRM environment, this is more critical, because we make a huge use of the middleware. But in our case, and especially after system/client copies, we can go, even if SAP does not guaranty anything, because we don't care about "old" replicated data (I don't care about old BDOCs, that should even be deleted after processing).
We have to take some risks sometimes...
Rgds
Christophe -
Unable to create IDOCs after client copy
I'm unable to create IDOCs after a client copy. I receive a SAPSQL_ARRAY_INSERT_DUPREC or insert of duplicate rows ABAP dump.
Does anyone know what how to fix this. Thank you in advance.
Runtime Error SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Date and Time 22.10.2007 16:50:51
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEDI1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"F09_IDOC_INSERT_WITH_NUMBER" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLEDI1" or "LEDI1F09"
"F09_IDOC_INSERT_WITH_NUMBER"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"F09_IDOC_INSERT_WITH_NUMBER"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "auaplxr3q"
Network address.......... "128.197.135.5"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "000B439ED600"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "auaplxr3q"
Database type............ "ORACLE"
Database name............ "Q63"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Mar 22 2007 20:48:46"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "175"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 1469352
MM Free.................. 2718056
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPLEDI1" in
"F09_IDOC_INSERT_WITH_NUMBER".
The main program was "SAPMSSY1 ".
The termination occurred in line 108 of the source code of the (Include)
program "LEDI1F09"
of the source code of program "LEDI1F09" (when calling the editor 1080).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "F09_IDOC_INSERT_WITH_NUMBER" "(FORM)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLEDI1 ". Its source code starts in line 5
of the (Include) program "LEDI1F09 ".
Source Code Extract
Line
SourceCde
78
perform call_badi tables list_container_insert
79
using control
80
ident.
81
Aufruf des Badi's für das einstreuen neuer Segmente
82
perform call_insert_badi tables list_container_insert
83
using control
84
ident
85
changing maxsegnum.
86
87
free list_container_insert
88
FREE_RETURN = 1.
89
ELSE. " no other IDoc is open in create-mode
90
LOOP AT LIST_CONTAINER_CREATE WHERE MANDT EQ SY-MANDT
91
AND DOCNUM EQ IDENT.
92
LIST_CONTAINER_CREATE-DOCNUM = DOCNUM.
93
MODIFY LIST_CONTAINER_CREATE.
94
ADD 1 TO MAXSEGNUM.
95
ENDLOOP.
96
if control-mestyp eq c_mestyp.
97
CALL FUNCTION 'FUNCTION_EXISTS'
98
EXPORTING
99
funcname = c_func
100
EXCEPTIONS
101
FUNCTION_NOT_EXIST = 1.
102
IF syst-subrc IS INITIAL. "Anwendungssystem
103
perform call_transform
104
tables list_container_create
105
using control.
106
ENDIF.
107
endif.
>>>>>
INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE.
109
Aufruf des Badi's für das Anwendungsmapping einzelner Felder
110
perform call_badi tables list_container_create
111
using control
112
ident.
113
perform call_insert_badi tables list_container_create
114
using control
115
ident
116
changing maxsegnum.
117
118
free list_container_create
119
FREE_RETURN = 0.
120
ENDIF.
121
122
insert status records
123
124
SYN_ERROR_IN = ' '.
125
CNTR_STATUS = 0.
126
REFRESH LIST_STATUS.
127
CLEAR LIST_STATUS.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FORM SAPLEDI1 LEDI1F09 108
F09_IDOC_INSERT_WITH_NUMBER
12 FUNCTION SAPLEDI1 LEDI1U19 33
EDI_DOCUMENT_CLOSE_CREATE_TAB
11 FUNCTION SAPLEDIR LEDIRU01 273
IDOC_INBOUND_WRITE_TO_DB
10 FORM SAPLEDIN LEDINF01 457
ONE_IDOC_STORE
9 FUNCTION SAPLEDIN LEDINU05 234
IDOC_INBOUND_ASYNCHRONOUS
8 FORM SAPLEDIN LEDINV05 19
IDOC_INBOUND_ASYNCHRONOUS
7 FORM SAPMSSY1 SAPMSSY1 254
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 59
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 229
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCV02 28
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 69
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 13 Ty. FORM
Name F09_IDOC_INSERT_WITH_NUMBER
CONTROL-MESTYP
USERCLONE
554544444222222222222222222222
53523CFE5000000000000000000000
C_MESTYP
FIDCCH
444444222222222222222222222222
694338000000000000000000000000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
LIST_STATUS-STAPA2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
C_FUNC
IDOC_TRANSFORM
444455544544542222222222222222
94F3F421E36F2D0000000000000000
SYST-REPID
SAPLEDI1
5454444322222222222222222222222222222222
310C549100000000000000000000000000000000
SY-UNAME
Q63CLNT140
533444533322
1633CE414000
%_DUMMY$$
2222
0000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SYST-SUBRC
0
0000
0000
ALE_IDOC_TO_APL_OK
62
33
62
LIST_CONTAINER_CREATE[]
Table IT_20[9x1068]
FUNCTION-POOL=EDI1DATA=LIST_CONTAINER_CREATE[]
Table reference: 14
TABH+ 0(20) = 070000008036F5B8000000000000000000000000
TABH+ 20(20) = 0000000E00000014000000090000042CFFFFFFFF
TABH+ 40(16) = 0400002300000CA0000824C401000000
store = 0x070000008036F5B8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 14 (0x0000000E)
label = 20 (0x00000014)
fill = 9 (0x00000009)
leng = 1068 (0x0000042C)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000048
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000008036F610
pghook = 0x07000000802D86D0
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 23 (0x00000017)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LIST_CONTAINER_CREATE
1400000000000511747000000009E1BPADRML 00000002#èXD63 070TST_QA140_1
3333333333333333333333333333434544544222222222222222222222333333330E54332222222233355555433353
14000000000005117470000000095120142DC0000000000000000000000000000238846300000000070434F11140F1
CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
G_MAXSYNERR
1
0000
0001
<%_TABLE_EDID4>
ALE_DISPATCH_ERROR
27
33
27
ALE_IDOC_READY_FOR_APL
64
33
64
%_SPACE
2
0
IDENT
0000000000000001
3333333333333333
0000000000000001
ALE_IDOC_TO_APL_ERROR
63
33
63
No. 12 Ty. FUNCTION
Name EDI_DOCUMENT_CLOSE_CREATE_TAB
IDENTIFIER
0000000000000001
3333333333333333
0000000000000001
NO_DEQUEUE
X
5
8
SYN_ACTIVE
Y
5
9
IDOC_CONTROL
1400000000000511747640 64 2SAPQ63 LSQ63CLNT140
3333333333333333333333233222222223545533222245533444533322222222222222222222222222222222222222
14000000000005117476400640000000023101630000C31633CE414000000000000000000000000000000000000000
SYNTAX_RETURN
0
0000
0000
INT_EDIDD[]
Table IT_10[9x1062]
FUNCTION-POOL=EDINDATA=G_T_DATA_RECORDS[]
Table reference: 9
TABH+ 0(20) = 0700000080284B80070000008028530800000000
TABH+ 20(20) = 000000090000000A0000000900000426FFFFFFFF
TABH+ 40(16) = 0400000900000AA8000824C401000000
store = 0x0700000080284B80
ext1 = 0x0700000080285308
shmId = 0 (0x00000000)
id = 9 (0x00000009)
label = 10 (0x0000000A)
fill = 9 (0x00000009)
leng = 1062 (0x00000426)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000039
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000080320D90
pghook = 0x07000000802E1508
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 17 (0x00000011)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802852A8
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080284B30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
NO_IGNORE
2
0
EDI_IDOC_SYNTAX_ERROR_IN
60
33
60
DOCNUM
0000000000511747
3333333333333333
0000000000511747
EXCLUSIVE
E
4
5
SYNCHRONOUS
S
5
3
APL_TESTIDOC_CHECK_OK
55
33
55
FREE_RETURN
0
0000
0000
INT_EDIDD
1400000000000000001000009E1BPADRML 00000000##XD63 070TST_QA140_17 X00
3333333333333333333333333434544544222222222222222222333333330054332222222233355555433353322533
14000000000000000010000095120142DC0000000000000000000000000000846300000000070434F11140F1700800
SUB_INT_ACK_POSITIVE
14
33
14
G_INSERT_OK
2
0
LIST_CONTAINER_INSERT_TMP[]
Table[initial]
LIST_CONTAINER_INSERT_TMP
0000000000000000000000000 00000000##
2223333333333333333333333333222222222222222222222222222222333333330022222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 11 Ty. FUNCTION
Name IDOC_INBOUND_WRITE_TO_DB
PI_DO_HANDLE_ERROR
X
5
8
PI_NO_DEQUEUE
X
5
8
PI_RETURN_DATA_FLAG
X
5
8
PI_RFC_MULTI_CP
0000
3333
0000
PI_STATUS_MESSAGE
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PE_IDOC_NUMBER
0000000000000001
3333333333333333
0000000000000001
PE_INBOUND_PROCESS_DATA
140BAPI 6
3334454222222222222222222222222222222222222222222222222223222222222222222222222222222222222222
1402109000000000000000000000000000000000000000000000000006000000000000000000000000000000000000
PE_STATE_OF_PROCESSING
0
0000
0000
T_DATA_RECORDS[]
Table IT_10[9x1062]
T_LINKED_OBJECTS[]
Table IT_11[0x100]
FUNCTION-POOL=EDINFORM=ONE_IDOC_STOREDATA=LT_LINKED_OBJECTS[]
Table reference: 10
TABH+ 0(20) = 000000000000000007000000802853F000000000
TABH+ 20(20) = 0000000A0000000B0000000000000064FFFFFFFF
TABH+ 40(16) = 0400000900002BB00010249401000000
store = 0x0000000000000000
ext1 = 0x07000000802853F0
shmId = 0 (0x00000000)
id = 10 (0x0000000A)
label = 11 (0x0000000B)
fill = 0 (0x00000000)
leng = 100 (0x00000064)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000190
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x0700000080285390
>>>>> 2nd level extension part <<<<<
tabhBack = 0x0700000080285340
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
PC_CONTROL_RECORD
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
L_STATUS
64
33
64
L_ALE_SUCCESS_MESSAGE
B1 S005 No filters
4322222222222222222253332222222222222222222222222222222222222222222222222246266676772222222222
21000000000000000000300500000000000000000000000000000000000000000000000000EF069C45230000000000
ST_PREVIOUS_PARTNER_DATA-SYNCHK
X
5
8
C_TRUE
X
5
8
SYST-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
C_ELEMENT_UNPROCESSED_IDOCS
Unprocessed_IDocs
56776667766544667222222222222222
5E02F353354F94F33000000000000000
ST_PREVIOUS_STATE_OF_PROCE
0
0000
0000
ST_INBOUND_PROCESS_DATA-EDIVR2
6
3
6
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
L_SYN_ACTIVE
Y
5
9
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
L_SYNTAX_RETURN
0
0000
0000
%_DUMMY$$
2222
0000
SY-REPID
SAPLEDIR
5454444522222222222222222222222222222222
310C549200000000000000000000000000000000
No. 10 Ty. FORM
Name ONE_IDOC_STORE
IDOC_NUMBER_IN
0000000000000000
3333333333333333
0000000000000000
STATE_OF_PROCESSING_IN
0
0000
0000
INBOUND_PROCESS_DATA_IN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS[]
Table[initial]
G_LAST_IDOC_NUMBER
0000000000000000
3333333333333333
0000000000000000
SYST-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
CURRENT_CONTROL_RECORD_IN-DOCNUM
0000000000000000
3333333333333333
0000000000000000
CONV_ERROR
2
0
C_TRUE
X
5
8
SY
0000000000000000000000000000000000000000000000000000000000000000000000000000000200000000000000
0002000000010009000000000000000000000000000100000001000000010000000000000000004C00000000000000
STATUS_MESSAGE_IN
000000000000000000000000000000000000000000000000000000000000
2223333333333333333333333333333333333333333333333333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_IDOC_SELECT_AND_WRITE_TO_DB
5
3
5
SY-REPID
SAPLEDIN
5454444422222222222222222222222222222222
310C549E00000000000000000000000000000000
STATUS_MESSAGE_IN-STAMID
22222222222222222222
00000000000000000000
GT_NEW_IDOC_IDENTIFICATIONS
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
STATUS_MESSAGE_IN-STAMNO
000
333
000
RET_FLAG
X
5
8
G_RFC_CODEPAGE
0000
3333
0000
RSJOBINFO-JOBSUBRC
0
0000
0000
SY-XFORM
IDOC_INBOUND_ASYNCHRONOUS
444454444544545544454445522222
94F3F9E2F5E4F139E382FEF5300000
SY-LANGU
E
4
5
G_T_DATA_RECORDS[]
Table IT_10[9x1062]
LT_LINKED_OBJECTS[]
Table IT_11[0x100]
CURRENT_CONTROL_RECORD_IN
1400000000000000000 30 2 LSQ63CLNT140
3333333333333333333222233222222223222222222245533444533322222222222222222222222222222222222222
14000000000000000000000300000000020000000000C31633CE414000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
SWO_%OBJID
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name IDOC_INBOUND_ASYNCHRONOUS
IDOC_CONTROL_REC_40[]
Table IT_3[1x524]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_CONTROL_REC_40[]
Table reference: 3
TABH+ 0(20) = 07000000802D876007000000802D449000000000
TABH+ 20(20) = 0000000300000003000000010000020C000000E0
TABH+ 40(16) = 0400000900001FE0000A249001000000
store = 0x07000000802D8760
ext1 = 0x07000000802D4490
shmId = 0 (0x00000000)
id = 3 (0x00000003)
label = 3 (0x00000003)
fill = 1 (0x00000001)
leng = 524 (0x0000020C)
loop = 224 (0x000000E0)
xtyp = TYPE#000136
occu = 10 (0x0000000A)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802DB9D8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 10 (0x0000000A)
lineAlloc = 10 (0x0000000A)
store_id = 9 (0x00000009)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
hsdir = 0x0000000000000000
ext2 = 0x07000000802D88A0
>>>>> 2nd level extension part <<<<<
tabhBack = 0x07000000802D8710
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IDOC_DATA_REC_40[]
Table IT_4[9x1063]
FUNCTION-POOL=EDINFORM=IDOC_INBOUND_ASYNCHRONOUSDATA=IDOC_DATA_REC_40[]
Table reference: 4
TABH+ 0(20) = 07000000802D880807000000802D896000000000
TABH+ 20(20) = 00000004000000040000000900000427FFFFFFFF
TABH+ 40(16) = 04000009000020500008249001000000
store = 0x07000000802D8808
ext1 = 0x07000000802D8960
shmId = 0 (0x00000000)
id = 4 (0x00000004)
label = 4 (0x00000004)
fill = 9 (0x00000009)
leng = 1063 (0x00000427)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000138
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000802E1550
pghook = 0x07000000802D8860
idxPtr = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 12 (0x0000000C)
shmIsReadOnly = 0 (0xHi Rohan,
Welcome to SDN!
This error means that you're trying to duplicate a record on the DB... check the IDOC number ranges... it might help
Regards
Juan
Please reward with points if helpful -
Hi,
I have performed a remoted client copy of ECP300 to ECQ system using
SAP_ALL Profile and the client copied successfully. After the client
copy some users are complainting that not all data moved over or there
are some major differences. I know the client copy finished but the
users are saying the client copy is not a exact copy of ECP.Are there
any functional or abap post configuration that needs to happen after
this remote client copy? From the client copy logs, it seem like all
the tables got copied over. Please advise as this is very critical.
I have attached 2 issues reported by users and the client copy log with
details. I have also attached the data dictionary differences of the 2
system ECP and ECQ using SCC9 --> RFC SYSTEM COMPARISON.
Target Client 220
Source Client (incl. Auth.) 265
Source Client User Master 265
Copy Type Local Copy
Profile SAP_ALL
Status Successfully Completed
User SAP*
Start on 01/07/2011 / 23:16:01
Last Entry on 01/08/2011 / 03:53:31
Statistics for this Run
- No. of Tables 56787 of 56787
- Number of Exceptions 1
- Deleted Lines 11478
- Copied Lines 152345539
/ISDFPS/CS_EXLST Field Missing Remote IS-DFS-MM /ISDFPS/MM_CS SAP TRANSP Exception List: Overwritten Purchase Requisitions SAPKGED04G
/SAPMP/GT_FDE_T1 Table Missing Remote IS-MP /SAPMP/FAST_DATA_ENTRY_GEN_APP SAP TRANSP IMG: Fast Entry in Trading Contract General Settings SAPK-603DDINECCDIMP
/SAPMP/GT_FDE_T2 Table Missing Remote IS-MP /SAPMP/FAST_DATA_ENTRY_GEN_APP SAP TRANSP Fast Entry in Trading Contract: Transfer from Info Record SAPK-603DDINECCDIMP
AD01DLI Field Missing Remote PS-REV AD01 SAP TRANSP Dynamic items (DI)
ADPIC_MIGO_SET Table Missing Remote IS-AD-MPN ADPIC SAP TRANSP Customizing Settings for MIGO SAPK-603DDINECCDIMP
ADPIC_MIGO_USR Table Missing Remote IS-AD-MPN ADPIC SAP TRANSP Customizing Settings for MIGO SAPK-603DDINECCDIMP
MPDCD Field Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: OBSOLETE - Counter Data for Maintenance Document Items SAPK-603DDINECCDIMP
MPDCUST_DATA_FLG Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Customising table to store the data container flag SAPK-603DDINECCDIMP
MPDCUST_EFFT_DOC Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Customising table to store effectivity data for documents SAPK-603DDINECCDIMP
MPDCUST_EFFT_TO Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Cust. table to store effectivity data from technical objects SAPK-603DDINECCDIMP
MPDCYCLE Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: Cycle Data for Maintenance Document Items SAPK-603DDINECCDIMP
MPDEFFECT Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD effectivity data SAPK-603DDINECCDIMP
MPDITEM Table Missing Remote IS-AD-MPD AD_MPD SAP TRANSP Maintenance Plan Items SAPK-603DDINECCDIMP
MPDPSD Field Missing Remote IS-AD-MPD AD_MPD SAP TRANSP MPD: MPD and MP header data SAPK-603DDINECCDIMP
ADMPN_RBA_CGRP Table Missing Remote IS-AD-MPN AD_MPN_RBA_DDIC SAP TRANSP Check Groups for APO ATP SAPK-603DDINECCDIMP
TMCNV Convertible -> Local CA-GTF-TS BMG SAP TRANSP Data on Material Numbers Conversion
CRFH Field Missing Remote PP-BD-PRT CF SAP TRANSP CIM production resource/tool master data
CKIS Field Missing Remote CO-PC-PCP CK SAP TRANSP Items Unit Costing/Itemization Product Costing
KALM Field Missing Remote CO-PC-PCP CK SAP TRANSP Costing Run: Costing Objects
KEKO Field Missing Remote CO-PC-PCP CK SAP TRANSP Product Costing - Header Data
MLCR Field Missing Remote CO-PC-ACT CKML SAP TRANSP Material Ledger Document: Currencies and Values
VSAFKO_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order header data for PP orders
VSAFPO_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order items in PP orders
VSAFVC_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Operation in order
VSAUFK_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Order master data SAPK-603DDINSAPAPPL
VSFPLT_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Billing schedule: Dates
VSPLAF_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Planned order
VSRESB_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Reservation/Dependent requirements
VSRSADD_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Additional fields for reservation
VSVBAK_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Sales document: Header data
VSVBAP_CN Field Missing Remote PS-SIM CNVS SAP TRANSP Version: Sales document: Item data
RSADD Field Missing Remote PS-MAT CN_MAT SAP TRANSP Additional fields for reservation
TCNTM05 Field Missing Remote PS-ST-OPR-NET CN_NET_OPR SAP TRANSP Assignment Components to Groups
AFKO Field Missing Remote PP-SFC CO SAP TRANSP Order header data PP orders
AFPO Field Missing Remote PP-SFC CO SAP TRANSP Order item
AFVC Field Missing Remote PP-SFC CO SAP TRANSP Operation within an order SAPK-603DDINSAPAPPL
AFFW Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Goods Movements with Errors from Confirmations
AFRU Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Order Confirmations SAPK-603DDINSAPAPPL
AFRV Field Missing Remote PP-SFC-EXE-CON CORU SAP TRANSP Confirmation pool
PLPO Field Missing Remote PP-BD-RTG CP SAP TRANSP Task list - operation/activity
STPO Field Missing Remote LO-MD-BOM CS SAP TRANSP BOM item
T414 Field Missing Remote LO-MD-BOM CS SAP TRANSP Explosion Types
CJITO_02 Table Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Customizing Table for Definition of Tolerances SAPK-603DDINECCDIMP
CJITO_02T Table Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Text Table to Define the Tolerances SAPK-603DDINECCDIMP
JITOCO Field Missing Remote IS-A-JIT DI_JITOUT SAP TRANSP Call Components JIT Outbound SAPK-603DDINECCDIMP
S2L_GLOBAL_DATA Field Missing Remote IS-A-S2L DI_S2L SAP TRANSP User-specific Save for Global Settings SAPK-603DDINECCDIMP
LFA1 Field Missing Remote FI FBASCORE SAP TRANSP Vendor Master (General Section)
KNKK Field Missing Remote FI-AR-AR FBD SAP TRANSP Customer master credit management: Control area data
VIMI01 Field Missing Remote RE FVVI SAP TRANSP Rental unit - Master data
VIOB01 Field Missing Remote RE FVVI SAP TRANSP Business entities
VIOB02 Field Missing Remote RE FVVI SAP TRANSP Property master data
VIOB03 Field Missing Remote RE FVVI SAP TRANSP Real estate building master
VIOB27 Field Missing Remote RE FVVI SAP TRANSP Relationship between properties and buildings
VIOB38 Field Missing Remote RE FVVI SAP TRANSP Relationship between Real Estate objects and SAP-PS
PEG_TXPT Field Missing Remote IS-AD-GPD GPD SAP TRANSP Pegging: Record of intransit stock in cross plant transfers SAPKGES01G
VEKP Field Missing Remote LO-HU-BF HANDLING_UNITS SAP TRANSP Handling Unit - Header Table
EQUI Field Missing Remote PM-EQM-EQ IEQM SAP TRANSP Equipment master data SAPK-603DDINSAPAPPL
EQUZ Field Missing Remote PM-EQM-EQ IEQM SAP TRANSP Equipment time segment
MHIO Field Missing Remote PM-PRM-TL IPRM SAP TRANSP Call Object from Maintenance Order
MHIS Field Missing Remote PM-PRM-TL IPRM SAP TRANSP Maintenance plan history
EQBS Field Missing Remote LO-MD-SN IQSM SAP TRANSP Serial Number Stock Segment
OBJK Field Missing Remote LO-MD-SN IQSM SAP TRANSP Plant Maintenance Object List SAPK-603DDINSAPAPPL
SER01 Field Missing Remote LO-MD-SN IQSM SAP TRANSP Document Header for Serial Numbers for Delivery
SER02 Field Missing Remote LO-MD-SN IQSM SAP TRANSP Document Header for Serial Nos for Maint.Contract (SD Order)
T377X Field Missing Remote LO-MD-SN IQSM SAP TRANSP Documents Allowed for Serial Number Management
CJIT01 Field Missing Remote IS-A-JIT ISAUTO_JIT SAP TRANSP JIT: Call Control SAPK-603DDINECCDIMP
VLCADDCUST Table Missing Remote IS-A-VMS ISAUTO_VLC SAP TRANSP VELO: Table for VMS additional end customer SAPK-603DDINECCDIMP
AFIH Field Missing Remote PM-WOC-MO IWO1 SAP TRANSP Maintenance order header
AUFM Field Missing Remote PM-WOC-MO IWO1 SAP TRANSP Goods movements for order
AUFK Field Missing Remote CO-OM-OPA KAUF SAP TRANSP Order master data SAPK-603DDINSAPAPPL
CEZP Field Missing Remote CO-PC-OBJ-PER KKPK SAP TRANSP Reporting Points Line Items
CPZP Field Missing Remote CO-PC-OBJ-PER KKPK SAP TRANSP Reporting Points - Periodic Totals Values
PABHD Field Missing Remote PP-KAB LAPA SAP TRANSP JIT call header record
PABIT Field Missing Remote PP-KAB LAPA SAP TRANSP JIT call items
LTAK Field Missing Remote LE-WM LVS SAP TRANSP WM transfer order header
ASMD Field Missing Remote MM-SRV MASB SAP TRANSP Service Master: Basic Data
CHVW Field Missing Remote MM-IM MB SAP TRANSP Table CHVW for Batch Where-Used List
ISEG Field Missing Remote MM-IM MB SAP TRANSP Physical Inventory Document Items
MKPF Field Missing Remote MM-IM MB SAP TRANSP Header: Material Document
MSEG Field Missing Remote MM-IM MB SAP TRANSP Document Segment: Material
RESB Field Missing Remote MM-IM MB SAP TRANSP Reservation/dependent requirements SAPK-603DDINSAPAPPL
MCIPMIS Field Missing Remote PM-IS-REP MCI SAP TRANSP PMIS: Master data characteristics for PMIS before image
MDTB Field Missing Remote PP-MRP-BD MD SAP TRANSP MRP Table
PLAF Field Missing Remote PP-MRP-BD MD SAP TRANSP Planned order
PKHD Field Missing Remote PP-KAB MD05 SAP TRANSP Control Cycle SAPK-603DDINSAPAPPL
TPK02 Field Missing Remote PP-KAB MD05 SAP TRANSP Key for Controlling Control Cycle: External Replenishment SAPK-603DDINSAPAPPL
T459K Field Missing Remote PP-MP-DEM MDPB SAP TRANSP Control table for customer requirements
EBAN Field Missing Remote MM-PUR ME SAP TRANSP Purchase Requisition SAPK-603DDINSAPAPPL
EKBE Field Missing Remote MM-PUR ME SAP TRANSP History per Purchasing Document
EKBEH Field Missing Remote MM-PUR ME SAP TRANSP Removed PO History Records
EKEK Field Missing Remote MM-PUR ME SAP TRANSP Header Data for Scheduling Agreement Releases
EKES Field Missing Remote MM-PUR ME SAP TRANSP Vendor Confirmations
EKET Field Missing Remote MM-PUR ME SAP TRANSP Scheduling Agreement Schedule Lines
EKKO Field Missing Remote MM-PUR ME SAP TRANSP Purchasing Document Header
EKPO Field Missing Remote MM-PUR ME SAP TRANSP Purchasing Document Item
EKRS Field Missing Remote MM-PUR ME SAP TRANSP ERS Procedure: Goods (Merchandise) Movements to be Invoiced
MARA Field Missing Remote LO-MD-MM MG SAP TRANSP General Material Data
MARC Field Missing Remote LO-MD-MM MG SAP TRANSP Plant Data for Material SAPK-603DDINSAPAPPL
MARM Field Missing Remote LO-MD-MM MG SAP TRANSP Units of Measure for Material
MCH1 Field Missing Remote LO-MD-MM MG SAP TRANSP Batches (if Batch Management Cross-Plant)
MCHA Field Missing Remote LO-MD-MM MG SAP TRANSP Batches
MVKE Field Missing Remote LO-MD-MM MG SAP TRANSP Sales Data for Material
T130F Field Missing Remote LO-MD-MM MG SAP TRANSP Field attributes
T134 Field Missing Remote LO-MD-MM MG SAP TRANSP Material Types
MVRA Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Cross-version fields for MARA SAPKGES01G
MVRC Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Cross-version fields for MARC SAPKGES01G
MVRM Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Units of Measure for Material SAPKGES01G
MVVE Field Missing Remote LO-MD-MM MGVERS SAP TRANSP Sales Data for Material SAPKGES01G
MILL_T399X Field Missing Remote IS-MP-PP MILL_PP SAP TRANSP Parameters for Partitioning Order - Order Type SAPK-603DDINECCDIMP
ESLH Field Missing Remote MM-SRV ML SAP TRANSP Service Package Header Data
ESLL Field Missing Remote MM-SRV ML SAP TRANSP Lines of Service Package
RSEG Field Missing Remote MM-IV MRM SAP TRANSP Document Item: Incoming Invoice SAPK-603DDINSAPAPPL
ADRC Field Missing Remote BC-SRV-ADR SZAD SAP TRANSP Addresses (Business Address Services)
VBAK Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Header Data SAPK-603DDINSAPAPPL
VBAP Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Item Data SAPK-603DDINSAPAPPL
VBEP Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Schedule Line Data
VBKD Field Missing Remote SD-SLS VA SAP TRANSP Sales Document: Business Data SAPK-603DDINSAPAPPL
CHVW_INC Field Missing Remote LO-BM VB SAP TRANSP Batch Where-Used List- N:M Assignment for Order
VBRK Field Missing Remote SD-BIL VF SAP TRANSP Billing Document: Header Data SAPK-603DDINSAPAPPL
VBRP Field Missing Remote SD-BIL VF SAP TRANSP Billing Document: Item Data SAPK-603DDINSAPAPPL
KONDH Field Missing Remote SD-MD-CM VKON SAP TRANSP Conditions: Batch Strategy - Data Division
LIKP Field Missing Remote LE-SHP VL SAP TRANSP SD Document: Delivery Header Data SAPK-603DDINSAPAPPL
LIPS Field Missing Remote LE-SHP VL SAP TRANSP SD document: Delivery: Item data SAPK-603DDINSAPAPPL
VALW Field Missing Remote LE-SHP VL SAP TRANSP Delivery Plan: Definition of Route Schedule
KNVV Field Missing Remote LO-MD-BP-CM VS SAP TRANSP Customer Master Sales Data
KNA1 Field Missing Remote LO-MD-BP-CM VSCORE SAP TRANSP General Data in Customer Master
FPLA Field Missing Remote SD-BF VZ SAP TRANSP Billing Plan
FPLT Field Missing Remote SD-BF VZ SAP TRANSP Billing Plan: Dates
TFPLT Field Missing Remote SD-BF VZ SAP TRANSP Date Type for Billing Plan Type
VBSK Field Missing Remote SD-BF VZ SAP TRANSP Collective Processing for a Sales Document Header
VBUK Field Missing Remote SD-BF VZ SAP TRANSP Sales Document: Header Status and Administrative Data
VBUP Field Missing Remote SD-BF VZ SAP TRANSP Sales Document: Item Status
WBHI Field Missing Remote LO WB2B_DDIC SAP TRANSP Trading Contract: Item Data
LFM1 Field Missing Remote LO-MD-BP-VM WLIF SAP TRANSP Vendor master record purchasing organization data
LFM2 Field Missing Remote LO-MD-BP-VM WLIF SAP TRANSP Vendor Master Record: Purchasing Data
ZPPWRKMAP Convertible -> Local BC ZDEV PTANAKI TRANSP PP-012: Work Center Mapping ECDK901192Hi,
What is the volume of data you copied. Also have you followed the best practice of minimal/no activity in the source client.
The dictionary differences seems to be becuase of some SPs not applied in your ECP system yet
Regards,
Sanujit
Maybe you are looking for
-
Unable to start the plain J2SE Adapter Engine
Hi All, Eariler i was able to start the Adapter Engine. But i dont know what went wrong, i am not able to start the adapter engine.Is there any way to find out what went wrong? Regards Sathya Message was edited by: Sathya Priya
-
ITunes 10.4 and podcasts
I downloaded iTunes 10.4 and now podcasts do not show up as an option under the Library (with Music, Apps, etc.) Can someone help me figure out what's going on? I downloaded it in Snow Leopard, and now in Lion, and the problem occurred in both vers
-
Selection screen default value maintain,user cant chage the default value
hi Friends SELECTION-SCREEN BEGIN OF BLOCK SCLDBLOCK WITH FRAME. SELECT-OPTIONS: S_WERKS FOR EBAN-WERKS DEFAULT 'IN01' NO INTERVALS NO-EXTENSION , S_MATNR FOR EBAN-MATNR, S_BANFN FOR EBAN-BANFN,
-
Error (-15000) I'm officially frustrated
I'm still getting this error (-15000). It's been happening ever since I updated to Itunes 8. I know there have been several posts about this, but from the ones I've found I haven't found a fix for my specific problem. All my software is up to date. P
-
Change the functionality of the keyevents according to the scene that it i
I am a student and I am doing my tesis about authoring tools. I have obtained to give the same functionality to a keyevent for all the scenes, however, I am trying to change the functionality of the keyevents according to the scene that it is at the