Client could not establish a connection to the remote computer

Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
computer.
Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
With warm regards,
Hariom
M-09875156100
mail : [email protected]

Similar Messages

Why does itune keep telling me it could not establish a connection with the software update server

i have an iphone 3g running on 3.1.3 firmware and every time i plug into my pc running windows 7 it says that it is contacting the software update sever then after about ten seconds it says that update failed could not establish a connection with the server i have tried to disable my firewalls completely and it seems that nothing works nothing is wrong with the iphone it sync's properly and works fine someone plz help me so i can update

Everybody is tryng to connect to apple,s servers. Try tomorrow, it will be quieter

VPN Issue: Could not Negotiate a connection with the remote PPP server

Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.

I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil

Could not establish secure connection with server

Hi ,
We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution? We would appreciate your quick response..

hi Alfonso,
Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
start with the CAM and view the hosts table
cat /etc/hosts
To check what domain u used to setup the CAM
cat /etc/resolver.conf
edit the hosts file so appears like so
192.168.10.1 cam1.mycompany.com cam1
192.168.15.2 cas1.mycompany.com cas1
Verify with 'cat /etc/hosts'
Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
Next edit the hosts file for cas1 so that it appears like so
192.168.15.2 cas1.mycompany.com cas1
192.168.10.1 cam1.mycompany.com cam1
Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
HTH
George

SCS-SSM-10 failover - could not establish a connection

Hi,
I'm trying to set up Cicso asa csc-ssm-10 modules for failover, and see the following messasge, when setup is complete and after system failover has been enabled:
InterScan for CSC SSM could not establish a connection. The software, hardware, and patch version on the peer devices must match. Please reconcile the mismatch that was detected and try again.
What could be the issue?

Yes, Jouni you are absolutely right, both devices should be Identical from hardware, software and licensing perspectives here are the output from show module 1 details command from both devices
ciscoasa# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Content Security Services Module-10
Model:              ASA-SSM-CSC-10
Hardware version:   1.0
Serial Number:      JAF1125001C
Firmware version:   1.0(11)2
Software version:   CSC SSM 6.6.1125.0
MAC Address Range: 001b.54f7.8d00 to 001b.54f7.8d00
App. name:          CSC SSM
App. Status:        Up
App. Status Desc:   CSC SSM scan services are available
App. version:       6.6.1125.0
Data plane Status: Up
Status:             Up
HTTP Service:       Up
HTTPS Service:      Up
Mail Service:       Up
FTP Service:       Up
Activated:          Yes
Mgmt IP addr: x.x.x.11
Mgmt web port: xxxxx
Peer IP addr:   x.x.x.1
show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Content Security Services Module-10
Model:              ASA-SSM-CSC-10-K9
Hardware version:   1.0
Serial Number:      JAD164401TU
Firmware version:   1.0(11)5
Software version:   CSC SSM 6.6.1125.0
MAC Address Range: 30f7.0dbc.ca96 to 30f7.0dbc.ca96
App. name:          CSC SSM
App. Status:        Up
App. Status Desc:   CSC SSM scan services are available
App. version:       6.6.1125.0
Data plane Status: Up
Status:             Up
HTTP Service:       Up
HTTPS Service:      Up
Mail Service:       Up
FTP Service:       Up
Activated:          Yes
Mgmt IP addr:      x.x.x.22
Mgmt web port:      xxxxx
Peer IP addr:       x.x.x.2

Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
    at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
    at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
    at coherence::component::util::Initiator::openConnection
    at coherence::component::net::extend::PofConnection::open
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::io::IOException: socket disconnect
    at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
    at coherence::net::Socket::readInternal
    at coherence::net::Socket::SocketInput::read
    at coherence::io::BufferedInputStream::fillBuffer
    at coherence::io::BufferedInputStream::read
    at coherence::component::util::TcpInitiator::readMessageLength
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
    at coherence::component::util::Daemon::run
    at coherence::lang::Thread::run
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
              <protocol>Tls</protocol>
              <local-certificates>
                <certificate>
                  <url>c:\Cert\</url>
                  <password>password</password>
                  <flags>DefaultKeySet</flags>
                </certificate>
              </local-certificates>
            </ssl>
thanks
Bala

Error 720 a connection to the remote computer could not be established win 8

hello, i have this error on my windose 8, error 720 a connection to the remote computer could not be established ,for VPN connection, how can i fix it ?

Hi，
For this issue,I would like to know your VPN protocol.
Did you use Windows in-built VPN client?
I think the issue is related to your security software or Firewall.
Let’s temporarily disable other security software and Windows firewall to check if that helps.
If it doesn't work, please uninstall the third-party security software or firewall to test it.
Also, please check your event view to see if there are some related error in it.
Regards,
Kelvin hsu
TechNet Community Support

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

I tried to redeem a digital download copy of a movie and was presented the following error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Any guesses on what it is and how to resolve it?
Thanks

Hi
Abhilash Francis,
Could you tell us your scenario? What's your project? Is it a WCF service?
Looks like this is not a code issue.
Just from the error information,
it seems that you do not configure the service certificate very well so as to Server was unable to process request.
I am not completely sure what the real scenario is, but it might be a problem of that It is a WCF services application, please check these following articles to configure the service certificate.
If not, please feel free to let me know.
How to: Configure an IIS-hosted WCF service with SSL
Could not establish trust
relationship for the SSL/TLS secure channel
Hope this helps.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Io exception : The network adapter could not establish a connection

Hi,
I installed an agent on Solaris 9 hosted database 9.2.0.1. All is up But when I try to connect database, I receive this error message :
Io exception : The network adapter could not establish a connection
thanks for your help
David

Thanks for the solution. Today I was stucked up because of same issue and your solution worked for me too ...
Thanks,
Sujit

Windows VPN: Error 720 - A connection to the remote computer could not be established

Dear all
I have a windows7 Laptop 64bit Dell 1340.
I was working with a UMTS card, was connected with a VPN to a windows 2003 server over PPTP and experienced a bluescreen. After this, I have the following errors when connecting to the VPN:
"Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection"
and in the event view I receive the following:
EventID: 1, Source RasSstp
CoId={A3478DFD-FFA4-4E8F-9DA3-CE829BDA777B}:The initial Secure Socket Tunneling Protocol request could not be successfully sent to the server. This can be due to network connectivity issues or certificate (trust) issues. The detailed error message is provided below. Correct the problem and try again.
I tried to use the Rarepair.exe tool but it looks to work only on windows xp. I deleted the IP and TCP settings without any luck.
I run a registry cleaner as well with out any luck.
Your help will be greatly appreciated!
Marc

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be established

Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

Hi,
Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
If system restore doesn’t help, please also try the following:
1. Check if you can establish the VPN via other connections except the connection through the UMTS card.
2. Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
Netcfg -u MS_L2TP
Netcfg -u MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
Then reboot the computer and see how it works.
Meanwhile, I would like to share the following with you for your reference:
Troubleshooting common VPN related errors
Hope this helps. Thanks.
Nicholas Li - MSFT

Error 720: A connection to the remote computer could not be established.

So I got an aircard Novatel P720. It was working fine for months. Then I installed a VPN connection. Now, I get this error.
Error 720: A connection to the remote computer could not be established.
Most of of what I found recommends uninstalling the WAN Miniport (IP), it seems that I have to go thru so many hoops to get this fixed. Wondering if I would be better off rebuilding my machine from scratch again. Is there an patch or another way to get me going.
I think this is an old issue. Lots of comments on this thru Google. I am hoping I can get a definative answer from Lenovo's itself!

josezald wrote:
So I got an aircard Novatel P720. It was working fine for months. Then I installed a VPN connection. Now, I get this error.
Error 720: A connection to the remote computer could not be established.
Most of of what I found recommends uninstalling the WAN Miniport (IP), it seems that I have to go thru so many hoops to get this fixed. Wondering if I would be better off rebuilding my machine from scratch again. Is there an patch or another way to get me going.
I think this is an old issue. Lots of comments on this thru Google. I am hoping I can get a definative answer from Lenovo's itself!
Well, seeing since your having an Issue with a non Lenovo product. I dont think your going to get an official answer from Lenovo. You may get suggestions however.
Ignorance is no excuse!

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Client could not establish a connection to the remote computer

Similar Messages

Maybe you are looking for