Client deleted accidentally
hi
my client 800 is deleted accidentally . how can i restore it?
restore from backup.
there is no "undo"
Similar Messages
-
hey guys i just wanna ask you if you know any way how to recover pics deleted from my camera rol and photo stream, i deleted accidentally without backing it up on icloud, any ideas how i can get it back
If you deleted them from both PhotoStream and the camera roll, and you don't otherwise have them backed up, they're gone.
-
HT202020 If I delete accidentally a video from my iPhone 5 is there any way to rescue?
I delete accidentally a video Fromm iPhone 5 is there any way to recue?
You have to start by erasing the phone so if there's any newer data on it that is not contained in your last backup, you'll need to save that first. Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup. Then sign into your iCloud account and choose your backup to restore from.
Be sure you phone is connected to wifi and your charger as this may take a while to finish. -
Client deletion taking long time....
Hi All,
I have been going through tough times in SAP ECC right now.
I am doing a client deletion using SCC5. Total entries in tables were 58514.
It was going fine till it reached 58504. From then onwards, the tables SAP is deleting are having crores of entries, which is why it is taking time.
My question here is, Is their any way by which we can delete the entries fast?
Like from Database level. Database iam having is Oracle. Can we run any sql delete command to delete entries from backend while SAP client deletion is in progress.
Its been 3 days since i have started client deletion and it is very frustrating now.
Could anyone of you please help me with this?Hi,
Thank u all for helping me out....
Well i am done with Client deletion....I deleted the entries from SQL level.
My client deletion is completed but with dictionary errors.
There are around 3-4 tables in which maximum of 100 entries are still remaining.
Now my doubt is whether i should go ahead with client copy or not?
If yes, please assist me with steps before starting copy, so that it doesnot take much time similar to client deletion (6 days)..
Regards,
Vikram -
Table space and recollection of released space after client deletion
Dear All,
I have two questions:
1.Can any1 tell me how to determine the fastest growing table and how to reorganize table space.
2. Is there any way by which we can recollect the space released:say after client deletion. I had deleted one client two weeks back and when I saw the SAP/user drive I fow free space available remains the same.
I searched but found no relevant clue.
regards,
Ashutosh1.- You can see the largest table report in ST04 (as far as i remember)...
2.- You can reorganize your db using brtools - brspace...
Read,
http://help.sap.com/saphelp_erp2004/helpdata/en/32/0d0c888839164ba4245b3ff7969c59/frameset.htm
Regards
Juan -
FREE SPACE COLLECTION AFTER CLIENT DELETION
Hi,
I delete a client but there is no effect on the database size.... means all the table space are having the same size as before client deletion...
What to do... to recollect all the free space after client deletion...???
Regards,
Neehir BhattHi,
Use brtools to reduce the tablespace size.
http://help.sap.com/saphelp_nw04/helpdata/en/a7/8db6c2ebc5384eb82e5f99e49600d6/content.htm
Regards
Ben -
Client Deletion Takes long time
Hi All,
Need help, Every month in our quality system we do client refresh so we delete existing data from quality and take export from production and Import into quality.Client Import takes 15 hrs but to delete client it almost takes 36 hrs. There are PCL4/2/1 tables which takes more time to delete the data even not sure they will delete all the data.Looks like these are cluster tables so what can be do to have more optimize client deletion.
To delete client from OS level is is safer side? What can be other ways...?Hi
PCL4 is not a cluster, at least on Ehp6 at DB level it is a transparent table, that means that the table does exist at both SAP & DB level.
There is a way to process deletion faster, at least for Oracle (but it could also work for other DB)
Create a new temporary table table with a CTAS command (copy table as select) to only include the data for the clients you want to keep.
You can then drop the original table and rename the temporary table to the original name.
Watch out CTAS does not copy indexes, constraints and default values.
If you are using Oracle DB datapump query parameter can be the best option.
You could export the data for the client you want to keep (setting a "query" option like query=" where MANDT in ('200', '300')") , truncate the table and import back the data.
The point here is that copying / inserting new records is faster than deleting.
Regards -
Client Deletion Status | CANCELLED
hi all
maybe someone has experienced this problem, a little assistance please
TIA
Client to be Deleted
600
Copy Type
Delete Complete Client
Status
Cancelled
User
SAP*
Start on
06.11.2009 / 13:48:31
Last Entry on
06.11.2009 / 13:57:39
Last Action:
Copy/Delete Tables
- Table Being Edited:
BFOD_A
Statistics for this Run
- No. of Tables
6707 of 54438
- Number of Exceptions
11
- Deleted Lines
0
Check System Log (SM21)Hi,
First clarify:
Are you able to login into client 600?
Do you want to login into 600, already deleted client?
do you want the root cause, why this was cancelled?
What wil happen if it cancelled in between?
I would suggest you to have a brief detail about Client deletion in client maintanance.
Regards
Nick Loy -
how to recover photo that i deleted accidentally while i was trying to upload the photo to the computer??
also, itn't itune will backup myself whenever i sync???Will the old back up file got updated when i connect the phone with computer??I don't think recovery software will help since the file isn't just deleted, it's overwritten. If you want to try, the backups are located at one of these locations:
Mac OS: ~/Library/Application Support/MobileSync/Backup
Windows XP: %AppData%\Apple Computer\MobileSync\Backup
Windows Vista: %AppData%\Roaming\Apple Computer\MobileSync\Backup
Windows 7: %AppData%\Roaming\Apple Computer\MobileSync\Backup -
Client deletion and reorganise
Is there any impacts to delete client with scc5 and T000 values? i want to delete 8 clients at a time from my test system. how can i reorganize database? can i delete directly with scc5 or any thing i could do? can i delete logical systems and rfc connections before going to delete clients? how can i delete these clients without side effects.
Thanks.Client deletion should not be an issue,u can do it with SCC5 just delete all the RFC's and logical connections prior deleting them.there are no sideeffects as such
use this method:
log into the client to delete
2. go into SCC5 and delete client
3. log into another client and delete entry with SCC4
u cal also delete the client from database but this is better option,use it
for database reorganization you can use BRTOOLS i.e BRSAPCE
check out the following link for more info.
http://help.sap.com/saphelp_erp2004/helpdata/EN/32/0d0c888839164ba4245b3ff7969c59/content.htm
Rohit -
How do I delete accidental (untitled) boxes "On My Mac" column?
How do I delete accidental (untitled) boxes "On My Mac" column in iCal?
ThanksKaren,
Do these (untitled) boxes contain calendar events? If so, they are really Calendars named "Untitled." You should name them by clicking on the word "Untitled" and entering the appropriate name for the calendar.
If the "Untitled" calendars do not contain events, use iCal>Edit>Delete after selecting the Untitled Calendar. -
Client deletion good practices
Good morning everyone,
I am after "best practices" when deleting a client.
I am not planning on re-using some of the deleted clients and want to make sure the landscape is cleaned up where possible with reference to these clients.
I am especially after anything that would take up space at the OS or database level that would not necessarly be cleaned up via SCC5.
Has anyone got recomendations on what can and should be cleaned up before and after a client deletion?
For example I have cleaned up WE20-WE21, the RFC...
The logs are still there under SCC3, usefull for historical purposes, but really should they been retained?
Thank you
CocoHello
You need to clean up all client dependent transport request Also you need to clean up the queues which are client dependent
thanks
atul -
Client Deletion, Transaction log getting full.
Hi Gurus,
We are trying to delete a client by running:
clientremove
client = 200 (*200 being the client we want to remove)
select *
The transaction log disk space allocated is 50GB, it is getting full (in simple mode) and client deletion never completes. The size of the table it is accessing is 86 GB, and i think 200 client will be occupying around 40-45GB. Client 200 has 15.5 million rows in the table.
I am i giving proper command ?is there any explicit commit i can include or any workaround for deleting the client and not hammer the log file.
Thanks guys
Edited by: SAP_SQLDBA on Jan 22, 2010 6:51 PMHi,
Backup the active transaction log file and Shrink the file directly.
Please refer the following SAP Notes to get more information.
[ Note 625546 - Size of transaction log file is too big|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=625546]
[ Note 421644 - SQL error 9002: The transaction log is full|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=421644]
Which version of SQL Server u are using ? SP Level ?
Frequently perform Transaction Log backup (BACKUP TRANS) to remove inactive space within the Transaction Log Files.
Please refer [Note 307911 - Transaction Log Filling Up in SQL Server 7.0|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=307911] to get more information about the reasons for such kind of situation.
Regards,
Bhavik G. Shroff -
Space Reorganization after client delete.
Hi Gurus,
I have a doubt in reorganization of space after client delete.
I have created a client and the client copy(local) was done successful. Now i want to delete the client and want to clear the space occupied by the new client (approx 2 GB) . Can u help me how to empty the space occupied by this client.
My environment..IDES 4.7 . Win 2k. Oracle database.
Thanks in Advance,
Sachin.Hi
Sachin.
Inorder to delete the client login to the particular client say like ex: 300
execute from the functions or SCC5.
Select if u want to delete it from the entry of table T000, schedule it immediately or background, Whenever it is deleted the space is not automatically freed from the database although these areas can be filled up with new data.
When a client is deleted and created again, the space which is freed can be filled up with new data.
To immediately restore the free space perform the database reorganization, this is recommended when ur client is having a large amount of database.
For ur case the client is of size 2GB, the new data can reuse the free space of the deleted client,
Checking the space management, current sizes,space statistics etc., Goto the Database performance or Tcode DB02 check the Date/Time analysis when it has done, Else do refresh so that a dialog box is opened and prompts u to select
1. Perform the database checks
2. DB checks and update statistics
Select the 2 option so that it will reorganize the database.
Regards
Bhaskar
Edited by: bhaskar1818 on Jun 3, 2008 10:15 AM -
Hi
After performing client deletion, how to do "reorg database to recover database space"? Kindly let me know the steps to proceed further...
Environment
SAP 4.6C
Oracle 10G
Windows 2003 X64
Thanks & Regards
Prakash.Pseems to be helpful for you
Oracle Database Reorganization
Maybe you are looking for
-
Need help on Java Tree Table.
Hi, I need to build a Java Tree Table as the follwing: the first column of the table is tree node, the rest are JTextField, Jlabel, JBottonBox etc. I tried the example of JTreeTable for the file system to make the other columns as JTextField etc. did
-
Adobe Acrobat Pro 9.5.5 Redactions apply on all pages of document
When I redact text on the first page of a document, the redaction marks appear on every other page of the document, I can not find a way to apply the redactions to only one page. I am trying to figure out how to have the redactions just appear on one
-
Where to assign project to an employee?
Hi All I am implementing HR for a construction company. I have a requirement wherein the employees will be under departments and will be working on different projects. For example, Employee A will be in Operations Department (HR Organization) and has
-
Hi Gurus, What will be the procedure after rejecting the usage decision. Stock from quality moves from quality to Blocked. So i tried moving the stock from blocked to quality through the inventory movement transaction, for which it giving an error "M
-
Hi, we have just got our new replacement desktop mac mountain lion osx 10.8.2, as the G5 was irrepairable. Now we can't find where to put our discs ?!? Have they now done away with being able to burn discs and put software discs in now and just rely