Client dies, but hs-agent doesn't.

Hello.
An oracle client connects to an instance and runs a query. That query is sent to a heterogeneous services. A heterogeneous agent-process starts up and manages the query from their. Now, the problem happens when the query takes too long and the user kills the client. The Oracle instance recognizes that the client has been killed and does the necessary clean up work.
However, the heterogeneous agent does not get any message to die. --At least from what I've seen. So what ends up happening is the agent keeps on processing the query and only exits after the query finishes, which could take hours.
Is there anyway to rectify this situation? For instance, perhaps you can configure agent-startup so that Oracle kills the agent or informs it? Or, maybe there is a way to examine the system tables to detect when you have a dangling HS agent?
thanks.

When you say you installed 11g recently, was this a new installation or an upgrade?
Particularly if this was an upgrade, I would expect you to see this error. You will need to reconfigure EM and re-create the repositories.
emctl stop dbconsole
emca -repos drop
emca -repos create
emca -deconfig dbcontrol db
emca -config dbcontrol db
That kind of thing...
Cheers,

Similar Messages

Cisco VPN Client connects, but doesn't....

Have an issue where the workstation connects to the remote router using Cisco VPN Client successfully, but cannot receive traffic, but can...... I can see the connection with sh cry isa sa, and can see the packets encrypt/decrypt via sh cry ipse sa, as well as see the encrypt/decrypt in the VPN Client status, these numbers match up with the number of pings that are sent across the tunne. I can also see the ougoing and incoming packets with wireshark on the Cisco adapter on the workstation that is connected over the tunnel, icmp to:x.x.x.37 from:x.x.x.100, icmp from:x.x.x.100 to:x.x.x.37. Even with wireshark seeing the traffic, the requests time out. Any ideas?

Matthew,
If you are seeing packets encrypted/decrypted on both sites, but not getting an actual response, it sounds like tough one.
Have you tried disabling the client's firewall?
Also, you to discard a possible problem with the VPN virtual adapter have you tried to uninstall/reinstall the VPN Client?
Sorry, the suggetions I'm giving you are very basic but it definetely sounds kind of a weird problem...
Let me know how it goes.
Raga

I can't download the Adobe Edge Reflow. The file's downloading is successfull but the file doesn't go to my Creative Cloud so I can't install the programme. I have already install the Photoshop CC and the Reflow Plug-in for Photoshop. May I ask help? :) T

I can't download the Adobe Edge Reflow. The file's downloading is successfull but the file doesn't go to my Creative Cloud so I can't install the programme. I have already install the Photoshop CC and the Reflow Plug-in for Photoshop.

Hello
1. I am running on Windows 8.1
2. When running the installer file from https://creative.adobe.com/products/download/reflow I get the following choice
I click "OK" which doesn't do anything for me (CC is off).
I turn CC on and run the installer again. I get the following window that within few settings disappears:
Then - just for half a second it says "Launching Creative Cloud desktop" and then it brings CC to front, and that's all.
RF still not there.
3. I spoke ta support agent on the Adobe chat on Friday. He looked into my computer for an hour. Uninstalled After Effects (after failing to update it). For some reason all apps disappeared from the list. They then reappeared after he opened PS.
This morning After Effects is still showing up in my system and is operational.
Weird.
4. At the end the agent suggested maybe Firewall is the problem here. Trying that out now.

Activated AT&T Pre3, wifi now, but App Catalog doesn't work?

[copied here from Precentral post/thread: http://forums.precentral.net/hp-pre-3/303421-activated-t-pre3-wifi-now-but-app-catalog-doesnt-work.h... ]
Hey there,
Just a couple of days ago, with a borrowed AT&T SIM, I activated a GSM Pre3, creating a new profile, then when it turned off to reboot, I removed the SIM card.
My plan is to just keep it in airplane mode and use it via WiFi.
Then I went home and tried to play with the App Catalog. I can browse it, but I can't download anything from it, free or not; the download fails after trying. The download progress bar doesn't make any progress. The phone's only using wifi.
In the app menu in the App Catalog, my "Preferences & Accounts" option was grayed out.
This morning, I remembered about the email verification email that I should have gotten from HP from creating a new profile. I found it and clicked the verification link therein. I just logged into my profile via the browser, and my webOS Account Status says "Email verified".
I tried again to go into the App Catalog (less than 5 minutes after verifying my email), and the "Preferences & Accounts" menu option is still gray and unavailable. When I try to buy a paid app, it says "The action could not be completed. Try again later."
The Wifi network is fine; I've just verified by loading a page in the browser.
What could be wrong with my App Catalog access? How do I fix it?
This isn't exactly my first webOS rodeo; I've had a Pre, an unlocked Pre2 (which I did pretty much the same thing for--borrowed SIM to activate, then use as wifi-only, App Catalog access is fine), and a TouchPad (shares the profile from the Pre).
I've never come across this problem before...
-- STITCHING IN A FOLLOW-UP MESSAGE --
I've tried an old Cingular SIM (no active account on it), an old AT&T SIM (no account on it), and even a TalkMobile SIM (from the UK).
None of those made any difference in the App Catalog. Downloads always fail, and the Preferences & Accounts menu option is always gray.
I even went into the SIM Toolkit app several times, with each of the SIMs installed, and each time, the app advised that the "menu" could only be used after the phone had been on for 30 seconds. It gave me that message even after definitely waiting for longer than 30 seconds.
Perhaps troubling on a different front is that, even with the UK SIM in there, the Pre 3 didn't ask for an unlock code, which I thought it was supposed to do (as soon as it detects a non-AT&T SIM in the slot).
Anyone got any other ideas about what to try??
Post relates to: Pre 3 Manta (AT&T)
Post relates to: Pre p100eww (Sprint)

Hey, so I don't have much in the way of definitive answers, but I've made some progress.
Here's the story from where I last left off...
I posted most of what I'd said by that point in this thread into a post in the Palm support forums (as of right now, no responses):
http://forums.hpwebos.com/t5/webOS-Software/Activated-AT-amp-T-Pre3-wifi-now-but-App-Catalog-doesn-t...
I tried Impostah to just install from there using the app IDs for the apps in which I was interested, both free ones and paid ones. Those downloads also failed with no helpful error messages
Then I had a looooong chat with Palm tech support, starting here: http://kb.hpwebos.com/wps/portal/kb2/na/deviceselector/page_en.html#NA Palm.com : Support[/url] Phones . I chose to start the process using the "HP Veer" option. Not much useful happened in that chat, but the agent did suggest that maybe a doctoring would help.
I doctored it using the ATT Pre 3 webOS Doctor available here: [url=http://www.webos-internals.org/wiki/WebOS_Doctor_Versions]WebOS Doctor Versions - WebOS Internals[/url]
I followed steps 1-12 detailed in this PreCentral thread: Global Paid App Catalog Access for new unlocked GSM Pre 2/Pre 3/Veer (using Impostah) (http://forums.precentral.net/webos-internals/281075-global-paid-app-catalog-access-new-unlocked-gsm-... ) At step 8, I did not have to set an activation country and language as that seemed to have been remembered from before (probably from the borrowed AT&T SIM I first used). At step 9, I created a new Palm Profile to use during this round of exploration. At step 12, wherein I was supposed to be able to confirm that I had paid App catalog access, I could successfully download free apps (Facebook, Skype, Clock Sync, Maps update), but paid apps still failed without making any progress. Note that this was all with an empty SIM slot.
I successfully unlocked the device. I put in an active T-Mobile SIM in there, booted it while in airplane mode, and the first screen after the HP blinking circle screen was dialpad screen asking me to enter an Unlock Code. I did, and it worked. I immediately placed a test call successfully with that SIM in into it, and the receiving phone showed that person's phone number, as it should.
I took a break from working with it, and, hours later, I just monkeyed around in Impostah a bunch more, and this is where it gets fuzzy, 'cause it was late by then. I think I spent most of my time in the Activation, App Catalog, Palm Profile, Accounts, and Backups scenes, both just viewing things and trying various things that mostly seemed to not make much difference. I also turned off the webOS automatic Backups a couple of times in that mix. I also managed to delete the Dr. Skipped Firstuse webOS account/profile from the device so that it no longer shows up in the Accounts app. But free apps still seem to download and install successfully...and I seem to be logged into my test profile. Note that I have not yet gone to step 15 of the "Global Paid App Catalog Access for new unlocked GSM Pre2/Pre 3/Veer (using Impostah)" thread, wherein you're supposed to doctor it again and activate/sign into the phone normally with. Mostly I've held off on it, because I'm afraid of losing the progress I've made so far. That and I don't have an active, data-enabled AT&T sim. My Accounts app is empty, not showing any webOS profile (it should, shouldn't it?), even though Impostah shows me signed in to my test profile.
Then, at some point, I went into the App Catalog, went into the details of a paid app (Homebrew Documentation), and tapped the "Download for $..." button. I then got a "Payment Setup" scene!!! So just now, I put in my credit card info, and I successfully downloaded the Preware Homebrew Application!
And I don't know which of my monkeying around bits actually made the difference!
So, now I've got a few main questions about how to proceed:
Is my Pre3 in some crazy intermediate state without a webOS profile really attached to it? It doesn't show any accounts in the Account app (I haven't added any email/contact/calendar/Skype/etc. accounts), but I'm concerned that it doesn't show the webOS account. The email and calendar accounts don't show any defaul accounts (should be the webOS profile, at least, I suspect).
If it is in some wacky state, do I need to doctor it to ensure that it goes into a normal state? In order, to ensure that, as step 15 in the Global Paid App Catalog thread says, "everything has been initialised correctly"? 'cause it doesn't seem like everything has been correctly initialized. But I don't like the possibility of losing the progress that I've made! Gr!
And I just found a patch that brings back the First Use app and allows you to run it...Maybe that's all I need?
http://forums.precentral.net/webos-patches/269972-patch-enable-profile-creation-activation-bypassed-...

Can ssh into client iMac but cannot mount home directory ...

I've got a server running 10.4.11 and a bunch of client iMacs (10.5.n). If I ssh into a client iMac it lets me log in but cannot mount my home directory (which lives on the server). Obviously ssh is getting my credentials from the server but isn't getting (or cannot get) the information to mount my disk. If I log in through the gui on the client it all works fine. I suspect this is less of an error and more of a design. Is there a way to get the clients to mount my home when logging in with ssh? If not then Apple presumably has a reason for disallowing this behaviour. Is there a way around this? Perhaps with mount_afp?
We want to be able to log into many client iMacs at once to run computations on them. Eventually we want to do this on a suite of XServes and XGrid. This is all very easy with linux and nfs and I was expecting the same sort of ability through OS X. I know that I can export everything from the server with nfs (though that may not solve my problem) but I only have the one system and multiple users and I can't really experiment while they are connected.
Suggestions? Comments? If there are obvious examples of this elsewhere please point me toward them.

Well it's never worked that way for me. Do you actually use this method to log in?
I've gone through all of the server logs, watching what gets added as I log on to a client. I don't see anything there that suggests it is even attempting to mount the home directory. I also watched on the client and didn't see any errors. When I ssh into a client I see the following message on the terminal, "Could not chdir to home directory /Network/Servers/server.some.place/Volumes/R1/UsersR1/username: Unknown error: 118" This suggests that the client knows where my home should be but doesn't know how to mount it.
I have enabled the basic setup on my server. User accounts have Home URLs like "afp://server.some.place/UsersR1/username" and Full Paths like "/Network/Servers/server.some.place/Volumes/R1/UsersR1" (R1 is a RAID disk). UsersR1 has been made into a Share Point and Server Admin tells me that the disk "will be automatically mounted using the AFP protocol as /Network/Servers/R1 on client machines". This part doesn't seem to be true as when I log into a client through the GUI the actual path that is mounted as my home is /Network/Servers/server.some.place/R1" (pwd in my home directory returns /Network/Servers/server.some.place/Volumes/R1/UsersR1/username which is a actually rather inconvenient).
Under the Advanced tab in the Workgroup Manager, Accounts pane, I've got "Allow simultaneous login on managed computers". This seems to work but also seems only to apply to the GUI, that is I can log onto several clients at once.
How do I ask a client machine what home directory information it is getting from the server for any particular user? Is there some setup on the client machines that will enable automatic mounting of homes through ssh? On the clients, the Directory Utility, which I have used to connect the client to a Directory Server, has a Mounts pane which allows me to "Edit automatic NFS mounts for this computer". I am not exporting any NFS from the server, but perhaps this is the way to make it work?
Perhaps what I want to requires Kerberos? I don't have that enabled.
When I have done this on a cluster of linux machines I exported the home directory from the server with NFS (exportfs) and then, using NIS and automount on the clients it "just worked". It was very simple. If it is supposed to work with Macs and OS X, it may be simple but it's not obvious.

Suddenly, Firefox won't load many websites. All I get is a blank page. I tried the fix suggested in knowledge base. Used 3 different virus/malware screens. No viruses, but some adware. Removed those, but it still doesn't work

Many common websites won't load, all I get is a blank page. I am running Windows Vista. Tried virus scans, got rid of some adware but it still doesn't work. I am now using Google Chrome. I've used Firefox for many years, but this isn't acceptable
== URL of affected sites ==
http://www.amazon.com
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

Update: This is NOT just related to "Yahoo" pages, while this problem first began with some of my Yahoo pages, it is now also happening with other NON Yahoo things I want to load up. Like Twitter, or Links in emails that load Blank, or even images within emails that show up Blank in the preview part of Yahoo mail. It is NOT a Yahoo issue as I have loaded up my Yahoo Mail in IE and Chrome, and everything loads wonderfully. I can even load up sites like Twitter, and other websites that will NOT load in Firefox, but they come up fine in other Browsers.
I have done the ONLY suggestion that came from Firefox Tech support, to load up FF in Safe Mode, but the problems still exists. I have uninstalled FF and re-loaded it, but the same problem is there.
Does anyone have any ideas here at all? I can't seem to get any Fire Fox help, so I am reaching out to the community here to see if anyone can help.... Thank you !!

And need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

and need the new iTunes 11.1 to be able to use my iPhone on iTunes but I need the new mac software update OXS 10.6.8, but my mac doesn't need or have an update what should I do! I'm upset :'(

The requirements for iTunes:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Your Mac must be able to run OSX 10.6.8. If you can run that OSX then you can run iTunes 11.1.
Which Mac do you have?
MJ

HI, I just got a Macbook Pro. It's great but my mail doesn't work at all. It will come up correctly, but take forever to download messages, then won't delete them, then won't save them to folders. Then when I go to quit mail it's like it gets stuck.

HI, I just got a Macbook Pro. It's great but my mail doesn't work at all. It will come up correctly, but take forever to download messages, then won't delete them, then won't save them to folders. Then when I go to quit mail it's like it gets stuck between quitting and not. I have to force quit, then restart my computer if I want to pull up my mail again. How can I fix this?

If you just got your new MBP you have phone support from Apple (which is quite good) call them. 800-692-7753 tell the automated answerer "mail technical support" you'll have human quite quickly. Hope this helps.

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Since I installed ios 6.1 in my iPhone 4, I can't sync it with iTunes. Can annyone help me? I have already reinstalled iTunes and reseted the iPhone, but it still doesn't sync. Thank you.

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

Using JarSettings to generate EJB client jar, but supported classes missed

Appreciated for any comments in advance.
I am using @jarSetting to generate EJB client jar file from workshop 9.2. The remote method of EJB has one input parameter that is defined as an interface. The interface is included in client jar, but the implementation of this interface is not.
Please advise how I can add the implementation of this interface to client jar?
Best Regards,
James

Hi James,
I believe the algorithm for creating the client jar is to simply inspect the EJB interfaces using reflection and to include all user defined classes and exceptions that are referenced by the interfaces. In your case, it sounds like a class is not being included because it is not directly referenced by one of the EJB interfaces.
I think the client jar creation algorithm can be described as "best effort" and unfortunately, it does not always end up including all classes needed by the client. I would recommend you add the additional classes manually using the jar tool.
- Matt

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

See Recover your iTunes library from your iPod or iOS device.
tt2

How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

How do I import an iPhoto Library (V.7.1.5) created on my old MacBook (10. 6.8) into my new Macbook pro (10.9.1) running iPhoto 9.5.1? I tried copying onto memory stick and moving to new mac, but new iPhoto doesn't recognise the library.

So what exactly did you copy over? If it's a 12 gig iPhoto Library then it sounds like the files are there. Perhaps the copy went wrong along the way.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can I remove my very old Apple ID from my Iphone 4S as I have created other apple IDs.The old one is still staying on my mobile but that email doesn't exist anymore. I cant rest my mobile as this email address is staying my icloud setting.

Q:-
How can I remove my very old Apple ID from my Iphone 4S. The old ID is still staying on my mobile but that email doesn't exist anymore. I cant rest my mobile as everytime i tried it asks ID password which I don't remember.

Hello mushysun,
Thanks for using Apple Support Communities.
If you did not sign out of your Apple ID on your iPhone before creating a new one, then you will need to sign back in with your previous Apple ID and then sign out. If you do not remember your password and do not have access to the email account, then you can reset your password by using the security questions.
If you forgot your Apple ID password - Apple Support
Have a great weekend,
Alex H.

Client dies, but hs-agent doesn't.

Similar Messages

Maybe you are looking for