Client dont Update throught Installationserver

Hi,
i got 25 clients that dont update throught the Installation Server. All 25 Clients are cloned from a Master-PC. On the Master-PC SAP 7.10 was installed. Do i must change a SID that the SAP Update Service use?
I dont found any detailed Information / descirption how SAP Installation works. I mean in witch order the Services on Client and Server communicate together. What Files are involved in this process and what Log files Log. Has somebody these Information or know how do i get these.
Hildwin Wonner

Hi,
First of all you should check if the package version on the Client PC's is lower than the one on the installation server.
Secondly try to go to one of the Client PC's with the userid you have configured on the installation server with remote desktop connection via windows.  If that doesn't work, it means the userid you are using to install the client hasn't sufficient permissions to install software to that Client PC.  Contact your windows competence center of you company to upgrade the SAPGui Installation Server Userid to an Administration level.  So the SAP Software Distribution Service works.
See on the Client PC's if they have all the same WkstaUpdater.cfg file with the correct routing to the installation server.
this file can be found on the C:\Program Files\SAP\SapSetup\setup\Updater directory
Also check if the following 2 processes run on your client pc's
NwSapAutoWorkstationUpdateService.exe
NwSapSetupUserNotificationTool.exe
Kind regards,
Gunter Van Den Broecke
Edited by: Gunter Van Den Broecke on Jun 12, 2009 1:59 PM

Similar Messages

  • SUS: Clients dont update to 10.6.3

    I got a problem with SUS. The updates were downloaded from Apple (the 10.6.3 v1.1 Combined Updates), got activated and are without error in the SUS-list in Server Manager. The original 10.6.3 updates are copied but not activated - I guess they were replaced by the v1.1 versions.
    The clients are managed and pointing to the snow-leopard.merged.1 catalog (all the other updates like itunes, raw compatibility etc are recognized correctly).
    But I cant get the 10.6.2 clients to upgrade to 10.6.3 - they simply find no updates when looking for updates.
    Please help, I'm gettting desperate about SUS
    Mike

    In the past, a single managed preference worked for all Tiger and Leopard clients. With Snow Leopard a different setting needs to be used which your message suggests you are doing correctly. However my own experience was that despite this it did not in reality work properly.
    Fortunately, Apple have now come up with a better approach. It basically boils down to the SUS server detecting what operating system version the Mac client is running and automatically redirecting the client to the correct catalog. This seems to work correctly for me in that my Snow Leopard clients do now see Snow Leopard specific updates. As however I had previously manually upgraded them to 10.6.3 I can only say this with regards to other updates.
    See this Apple tech note on how to set up your system.
    http://support.apple.com/kb/HT4069
    I used the third solution in that document which is under the heading "Using the same URL for all clients".

  • Client Auto-Update questions

    We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
    I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
    I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
    The clients are currently at 502, and they should now be 506.
    Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
    I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
    Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
    Does that seem right?  I would have expected an increment in version number.
    Has anyone else seen this, and can you offer any advice?
    Thanks
    Craig
    Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

    Here is an extract from the note:
    It does not say about the Patch! sorry...
    the note is 1269662
    Summary
    Symptom
    The Client Auto Update feature does not work in 5.1 SP5.
    Other terms
    auto, update, client, upgrade, install
    Reason and Prerequisites
    This is due to unintended consequences of fixing IM 3569686 issue in SP5.
    Solution
    Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
    Once all clients have been updated, add the node back to the file.
    The node is found in the following section:
    <globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
      <webServices>
           <protocols>
                <add name="HttpSoap"/>
                <add name="HttpGet"/>
                <add name="HttpPost"/>
                <remove name="Documentation"/>
            </protocols>
      </webServices>
    Header Data
    Release Status:     Released for Customer
    Released on:     25.11.2008  19:51:41
    Master Language:     English
    Priority:     Correction with high priority
    Category:     Program error
    Primary Component:     EPM-BPC-MS-SVM-OTH Other
    Hope this helped
    Bye

  • Windows 8 clients not updating via SCCM?

    I am running Windows Server 2012 R2 and SCCM 2012 R2 (v5.0.7958.1000) and am trying to deploy updates to a Windows 8.1 client but am not having any joy, I keep getting errors within the WindowsUpdate.log.   
    Can deploy updates to Windows 7 machines okay but not Windows 8.1. 
    An extract of the log can be found here http://1drv.ms/1aJm3VO 
    www.techielass.com

    logs seems to be good .you can check other logs like wuahandler.log ,updatesdeployment.log . Read the blog post how to troubleshoot software update  issues http://eskonr.com/2015/04/sccm-2012-troubleshoot-client-software-update-issues/
    Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: eskonr

  • Adobe Content Viewer in iPad dont update the contents on mi Folio Builder! Help!

    Please, someone have de same problem?!
    When i update my folio through the Folio Builder in Indesign 5.5, the Content Viewer in iPad dont update de folio.
    In Acrobat.com i see the contents update, but in iPad/Adobe Content Viewer not.
    Why this problem happens?
    Tanks.

    As I wrote on another thread (and this was directed at Adobe employees)
    "I have been closely monitoring many threads here at DPS (and DPS Private Beta Forums) in the last few weeks, and yes I am new to this particular product group having only been in it since March.  But I wonder if there is some way that Adobe can be made aware of how serious this issue is with Builder and Viewer and tools "not lining up" with Apple.
    "To keep putting this problem on Apple is somewhat of a shopworn technique (and I say this with all due respect.). Still, Apple commands fully 80+ % of the tablet market.  They are the big dog.
    "Suggestions for the future:  Perhaps there will be a way to choose a tools/viewers workflow at startup -- or to put a bigger "red flag" before installing any update that is not yet supported by Apple.  Approaching this from the engineering side, you may have forgotten just how many disclaimer screens the average designer/production person faces every week!  Many of us don't read them carefully. (Richard Dreyfuss reads them).
    "I have nothing but admiration for what Adobe software engineers are trying to do -- and these are nascent times to be sure.  But it certainly seems like this launch is going poorly.
    -- Jeff

  • How to train client to update  muse

    How does one enable client to update a muse website? Thx!

    They have two options:
    1 - Use In-browser editing  for minor updates
    2 - Use Muse for bigger updates
    If you can provide a bit more information about your situation we might be able to give a more precise answer.

  • Is there an easy way for a client to update a small part of a muse site?

    I am a Creative Cloud subscriber.
    I've made several small websites in Muse and enjoy using it, more so than Dreamweaver, as I'm not a web expert. I've exported those sites as HTML and published them via my own domain and hosting.
    I've been commissioned to make a website where the client can update a small "latest news" section on the site without my intervention.
    Is there any easy way to do this, short of my client buying a Muse subscription?
    Cheers
    Mark

    Hi Eugene,
    look at this
    Jam Session: Advanced CMS Integration with Business Catalyst
    Online Thursday, February 14 / Register now ›
    In this week's Jam session Christopher Kellett of Musegrid.com and Dani Beaumont will break down the process of integrating dynamic data features from the Adobe Business Catalyst Content Management System (CMS) into a published Muse site. The workflow will include inserting modules into your Muse design, changing site layouts quickly and easily, and customizing the integrated design by editing global CSS style sheets. Familiarity with Muse and Business Catalyst highly recommended.
    Best Regards
    TaikaJim

  • Cannot connect to any IM clients since updating to snow leopard.

    Hey Guys
    I'm having a problem with my IM clients since updating to 10.6. I use Adium primarily and have Microsoft messenger through Office 2008 installed. Every time I try and connect to the servers I get a message in Adium telling me it has a connection error and Microsoft Messenger tells me I am not connected to the internet. I have tried other clients such as Pidgin and have the same issues and my MSN still works on my windows desktop. I am absolutely stuck with what to do. Adium support says that as it doesnt work on Microsoft messenger its nothing to do with them and its a issue on my side :S.
    Any help is appreciated.

    Thanks for responding guys. I looked to see if their was a firewall option somewhere I could disable or make a exemption for but came up with nothing. Today I reinstalled snow leopard again and every thing seems ok now. I really am not sure what the problem was.
    Thanks for your help anyway. this could help others in a similar situation.

  • Nokia 5230 dont update to 51.x.002

    Hi all,
    I have a 5230 and if i try to update to latest software, dont update to 51.x.002.
    I use Nokia Suite 3.8.48 > Sofware Update > Refresh or on phone
    Menu -> Applications -> SW updates.
    More info from Nokia Suite:
    Model :5230
    Type: RM-588
    From phone:
    Software version: 50.0.001
    Date: 28-04-2011
    Personalized version: 50.0.001.315.02
    Date of personal version: 22-07-2011
    Language set: 05
    Model: 5230
    Type: RM-588
    Last update: not updated.
    Buy from Vodafone Romania as new.
    Is a chance to get latest software update, and if, HOW?
    Solved!
    Go to Solution.

    The map data for all Symbian phones was not updated since July 2013. You have the latest version.
    The HERE team thinks, if you need newer map data, you have to switch to Windows Phone 8 or Android.
    To get v3.09 of the map application, you need a Symbian^3 device like a Nokia 700. You have the latest version of Nokia Maps for a Nokia 5230. Even with the latest firmware-version for your hardware-type (RM-588) which is not available for your firmware-variant (0597862), there would be no newer map application.
    Do you face any concrete issues with Nokia Maps?

  • RMi client dont lookup!

    hello
    I write easy RMI server and client... Every things seems look well but client dont catch reference to remote object or I dont know what...
    I see "Lookuje" on console but "done" dont show...
    try{
              System.out.println("Lookuje");
              TeleBook w = (TeleBook)Naming.lookup("rmi//loaclhost/magazine");
                   System.out.println("Done");
              } catch(Exception e) {
                   e.toString();
    }I have all "stub" in directory and policy, rmiregister run, please help i dont know what to do... Next step will be write all again
    All source: http://ekontra.com/sadu/DEMO/RMI.rar

    As your catch block has suppressed all the relevant information it is impossible to say what the problem is. Try printing something out ...

  • Some Clients Not Updating. Reporting "Compliant." hr=8007000E Error in WindowsUpdate.log

    I have a significant number (but not all) of my SCCM 2012 R2 CU3 clients not updating though my SCCM software updates. On these problem clients, I get this error in WindowsUpdate.log:
    "COMAPI WARNING: ISusInternal::GetUpdateMetadata2 failed, hr=8007000E"
    Then these machines report "Compliant" even though they don't install the updates. Almost all of our workstations are Windows 7 SP1 32bit. We are running SCCM 2012 R2 CU3. My site servers are running Windows 2008 R2.
    I don't see much in WUAhandler.log or scanagent.log. These client are however, getting my SCEP definition updates just fine. (I have an ADR for those.) And when you go out to Microsoft for security updates it works. I have tried all of the usual Windows
    Updates repair suggestions (re-register dlls, rename software distribution folder, etc.) And I tried un-installing and re-installing the SCCM client on a problem PC, to no avail. I also tried using a Software Update Group with fewer updates (<100) and targeting
    a problem system with only that SUG, to no avail.
    Any assistance would be greatly appreciated. Thank you.

    Hi all,
    One of the bigger nuissances of this particular bug is that it's hard to identify from a central location that you've fallen victim to it. Without spot-checking client machines you'd be none-the-wiser. This most likely results in a lot of shops out their
    thar are completely unaware they have a security issue with a false sense of "fully patched" security.
    I've create the following guidelines to identify whether you are indeed one of the victims.
    create a script configuration item.
    Select All Windows 7 32 bit as the supported platform
    Use String as the data type
    Choose powershell as your script language of choice
    Paste the following text in the discovery script:select-string-pattern'GetWARNING:
    ISusInternal::GetUpdateMetadata2 failed, hr=8007000E'-path"$env:windir\windowsupdate.log"
    Add the configuration item to a Configuration baseline
    Deploy the configuration baseline to All Windows 7 32bit machines
    The report list of assets by compliance state for a given baseline is a good report to check the results.
    !!!! Any machines reporting compliant to this baseline have a serious issue as they won't install any software updates, yet report compliant on all !!!!
    Good luck
    Hi, Does the configuration item need any kind of compliance rule setup to make it work?

  • Netweaver dont update project

    Hello,
    I have a Webproject written Java running at Netweaver.
    The project contains some flashfiles from Xcelsius.
    Then problem is, if I change the Flashfiles and then publish it on the Server, Netweaver dont update the flash files.
    Best Regards
    Sam

    jack19855,
    It is simply a quick way to update progress for a whole project or just selected tasks, normally to the status date. My personal feeling is that it is of limited usefulness since progress is unique for each and every task and a blanket update may not give
    a true representation.
    You might find this similar thread also helpful: https://social.technet.microsoft.com/Forums/en-US/01d57ca7-18ea-4bd5-a905-bc755aff982e/update-project-options-for-update-work-as-complete-through?forum=projectserver2010general
    Hope this helps.
    John

  • HT2434 does anybody know what happens if I dont update the firmware of my macbook pro (does not have a guid partition scheme))

    does anybody know what happens if I dont update the firmware of my macbook pro (does not have a guid partition scheme)?

    Apple will hire a high school girls clique to follow you around, make fun of you & post disparaging comments on Facebook .

  • How to Know, No. of Rows has been Update, throught Triggers

    Hi all,
    I am having problem in after update trigger. I want to know How many rows has been updated by a sql statement, for that I have written on (AFTER UPDATE TRIGGER ON EMP). But it is not giving any result. I am executing Update statement from
    Sqlplus (UPDATE EMP SET SAL=23 WHERE EMPNO=7369;) We cant use Commit, and dbms_output.put_line in trigger. thats why I have used exception.
    CREATE OR REPLACE TRIGGER EMP_UPDATE AFTER UPDATE ON EMP
    DECLARE
    NO      NUMBER;
    NOROW      EXCEPTION;
    PRAGMA      EXCEPTION_INIT(NOROW, -20101);
    BEGIN
    NO:=SQL%ROWCOUNT;
    IF NO<>0 THEN
    RAISE_APPLICATION_ERROR(-20101,'Some Rows UPDATED');
    END IF;
    END;

    Hi Sachindra
    What SQL*Plus version you are using?
    Some versions that come with forms6i they dont write the number of rows updated, they just write operation 44 succeeded or something like that.
    But if you use the SQL*Plus database client (sqlplusw.exe or sqlplus.exe) which those 2 get installed with the db you will be able to see the number of rows update/deleted/inserted
    SQL> conn scott/tiger
    Connected.
    SQL> DESC EMP
    Name Null? Type
    EMPNO NOT NULL NUMBER(4)
    ENAME VARCHAR2(10)
    JOB VARCHAR2(9)
    MGR NUMBER(4)
    HIREDATE DATE
    SAL NUMBER(7,2)
    COMM NUMBER(7,2)
    DEPTNO NUMBER(2)
    SQL> UPDATE EMP SET SAL = 23 WHERE EMPNO = 7369;
    1 row updated.
    SQL>
    Hope this helps
    Regards
    Tony G.

  • [network:ftp client] kftpgrabber [Updated 2004-12-24]

    Update 2004-12-24: Howl dependency removed.  For normal ftp usage zeroconf is not needed anyway.  Howl will be re-submited on another forum thread.
    Update 2004-11-28: Packages were updated and the links remoded since point to old packages.  Follow the thread for the packages sources that were updated.
    For those KDE users who want to test kftpgrabber, can get the arch package source here:
    PKGBUILD
    pkgname=kftpgrabber
    pkgver=0.5.0
    pkgrel=3
    pkgdesc="A graphical FTP client for KDE"
    url="http://kftpgrabber.sourceforge.net/"
    license=""
    depends=('kdelibs>=3.2' 'openssl>=0.9.7d')
    conflicts=()
    replaces=()
    backup=()
    install=
    source=(http://kftpgrabber.sourceforge.net/releases/$pkgname-$pkgver.tar.bz2)
    md5sums=('80d0f75a5b62ea05297bad67d859815b')
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=/opt/kde --without-howl
    make || return 1
    make DESTDIR=$startdir/pkg install

    excellent ftp client, tnx
    kbear was never able to connect to any ftp on my computer... no idea why, but now i dont even care
    tnx darkcoder

Maybe you are looking for