Client Driver availability

Hi friends,
I have installed oracle client 64 bit in windows 2008 RS 64 bit environment to connect with the oracle database which is installed in sun solaris.
I can see the oracle driver client appearing in the system DSN(via control panel>>ODBC source and also i can see it in windows>>system32>>obdcba.exe), so that i can add it and configure the connection with the database.
But i cannot see the same oracle driver client appearing in windows>>sysWOW64>>obdcba.exe inorder to configure connection.
Due to that i cannot import a table from the informatica designer which shows with the drivers available in windows>>sysWOW64>>obdcba.exe and not in the system 32 or in the control panel.
Is it possible to change the driver location that informatica is pointing out(currently it is showing the sysWOW64 drivers) and not the system32 drivers.
Kindly help me.
Thanks
Regards,
Saro

Pl do not post duplicate threads - How to find out what I have selected after I have installed Oracle Client?

Similar Messages

Windows 7 and Windows 8 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

Windows 7 - Driver Availability Chart For Creative Products is nearly useless

<span class="text">[url="http://support.creative.com/kb/showarticle.aspx?sid=605">Windows 7 - Driver Availability Chart For Creative Products[/url] is outdated Windows pre-release drivers (at least for the Audigy SB0090 series) back from July. This appear to be revamped Vista drivers that are not usable for W7 RTM. MS made changes to W7 where most Vista drivers do not work properly any more.
When I try to install the drivers through the installer I get the incompatibility error and the installer quits, then I get the failed install pop-up for W7.
What I would like to know is when Creative plans on releasing drivers that work with W7 RTM? Llinking drivers that worked for W7 RC is not helping and really should be removed.
I have used Creative sound cards since just before the SB6 came out. I have been a loyal Creative customer from early on. But if Creative can not deali'ver a fully working driver suit for my sound card by the end of the month (November) I would appreciate knowing so I can start looking for another a replacement, which won't be a Creative product.
Even though my last 3 MBs have had good built-in sound, I have went out and bought Creative sound cards because I wanted the best, which Creative has previously provided.
I need to upgrade my MB so I have put of buying a new sound card until I do. But if I'm forced to buy a new sound card because Creative says it will provide drivers that work with W7 RTM and for what ever reason can not do so, I will not be buying another Creative product.
I maintain 4 PCs of my own so that will be 4 cards bought from a competitor since Creative has completely dropped the ball. All major component manufacturers have been able to release stable drivers at the same time as W7 RTM release , or within days after release. Why hasn't Creative been able to do so? Creative was able to release suitable drivers for RC in a timely fashion, what happened with W7 RTM? Did they recently fire all the programs and techs?
Please do not link useless info. Please find out what is going on and tell the powers-that-be at Creative they have some really upset customers and ask them to tell us what is happening here. Tell them we would like to know when Creative plans on releasing drivers for W7 RTM so we can make the decision to wait it out or buy replacements.

Again, yes Device Manager has no problem detecting the card and W7 has no problem loading the default Window drivers for it.
Since I had to replace my TV Tuner Card, I used Device Manager to remove it and my Audigy card and then shut the PC down. My new TV Tuner Card is a PCI-E x so I installed it in an open slot and move the Audigy to the PCI slot where the old TV Tuner Card was.
When I started my PC again, W7 detected the Audigy card and loaded the defeult drivers. I again tried to use the installer and had the same error.
The sound works, but I only have basic Windows functions/controls.
It is most definately not a hardware issue.
The online auto update detects it, just the installer does not detect it.
I am currently awaiting a response from CS now. Of course the problem there is that you have to wait/respond, wait/respond, wait/respond just to cover the same ground that has been gone over a hundrd times already.
I put every step I have done in the email. As usual, it was a waste to type because you are asked questions already answered and to preform steps already done.
It would be nice if CS would realize that some of us are only contacting CS because we have already done all the standard steps without success and now need to move onto the advanced ste
ps.

Windows 7 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 Driver Availability Chart for Creative's products. Please note that the date in the chart may vary from time to time in accordance to Microsoft's plans on Windows 7 release.
Thank you.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

ODBC Connection problem with SQL Native Client driver with CR 11

I am having an issue connecting my crystal reports to an ODBC connection that uses the SQL Native Client driver (Version 2005.90.2047.00). My reports work fine when using the SQL Server driver (Version 2000.85.3006.00). The ODBC connection is setup to use Integrated Windows Authentication and is defaulted to go to the correct database. When I test the ODBC connection in the 'ODBC Data Source Adminstrator' it connects fine.
The reports are trying to connect to stored procedures on a SQL Server 2005 database. I can log onto the ODBC connection in CR X1. When I try to set the Datasource connection for one of my reports to the ODBC connection I created, I get the following error:
'Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.'
When I drill down to the SP and try to update the datasource location of the SP directly I get the following errors:
'Data Object cannot be opened/accessed'
and
'Unknown Database Connector Error'
As I said, I don't have any problems when using the SQL Server 2000 driver. One other thing to mention, when I initially connect to the ODBC connection in CR X1 with the SQL Native Client driver, it asks for a username and password. I leave these blank since I'm using Windows Authentication.
Any advice would be appreciated.
System:
Windows XP
Service Pack 3
Crystal Reports XI:
Product Version 11.0.0.1282

Hi Jeff,
I just tried to create a new report using the native driver and there is no option to use Trusted Authentication. This would be why it's failing.
I don't believe we fully supported Native driver in Cr XI. Try downloading CR Xi R2 and install SP6 from this info:
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
I tested it in R2 and the Trusted Authentication option is there so your reports should work.
Thank you
Don

"No CD/DVD drive Available"

My luck with Elements has been down right rotten here lately ! I have been having trouble re-sizing pictures and now that I've just about got that figured out and I'm ready to burn them to a DVD I get a message telling me that there is "No CD/DVD Drive Available" !
Ok,no need for me to beat around the bush I have no idea what this means....I mean..... I do know that I have burned videos onto DVD's and made many music CD's on my laptop in the past with no problem,but I have never even attempted to burn any photos . So.... is this telling me that I need some special Driver in order to burn photos to a DVD ? Thanks again for sharing your knowledge ! You folks have been a huge help in my PSE education !

Here's some additional info about trying to solve your problems. In some cases CD burning problems can be caused by "filters", which are located in the Windows system registry. Here's a page with this information; http://www.techspot.com/vb/topic137666.html#post815753 as well as additional links for reference. Problems caused by registry filters normally cause system wide trouble with the optical drives, so I'm providing this for general knowledge as much as a solution.
PSE links to system functions by files called "dll (s)" (dynamic library links), they can be damaged or corrupted in various ways. There isn't much sense in trying to repair the PSE installation via these files. There are too many, and I can't tell you with which one the problem might exist.
Since you say that PSE has been giving you headaches in general recently, it might be time to try a reinstall of the program.
An un/reinstall may solve your problems, and won't damage or lose any of your catalog information. With that said, before you begin, write your tags and metadata info to the pictures. That file path is "File" (top menu bar) > "Write keyword tag and properties info to photos". If you haven't done this already, it's best to apply the data by selecting groups of photos rather than selecting all the photos at once. Too many photos selected at once might possibly crash the program, and in smaller groups you have the reassurance that the task has been accomplished.
If you decide to attempt a reinstall, completely disable your anti virus program before you begin.
I should add that sometimes malware infections can cause random problems with existing software. In an effort to be thorough, it might be prudent to do some scans with your security software before you begin. It can't hurt. Mr. John Ellis has stated that Norton security products in particular can have some adverse effects on a PSE installation. (At least I hope I've quoted him correctly).
Feel free to post back or begin a new thread, if you need any more info or assistance.

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
For information, this is the message history when I try to connect:
[12/8/2014 8:55:49 AM] Ready to connect.
[12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
[12/8/2014 9:27:22 AM] Please enter your username and password.
[12/8/2014 9:27:29 AM] User credentials entered.
[12/8/2014 9:27:30 AM] Please respond to banner.
[12/8/2014 9:27:31 AM] User accepted banner.
[12/8/2014 9:27:31 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Checking for profile updates...
[12/8/2014 9:27:32 AM] Checking for product updates...
[12/8/2014 9:27:32 AM] Checking for customization updates...
[12/8/2014 9:27:32 AM] Performing any required updates...
[12/8/2014 9:27:32 AM] Establishing VPN session...
[12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
[12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
[12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
[12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
[12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
[12/8/2014 9:28:22 AM] Connection attempt has failed.
[12/8/2014 9:28:24 AM] Ready to connect.
I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
-TheJayDude

Yes, I am sorry to say that several people have seen the same issue. It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things. The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up. We re-added the default route manually which allows us to ping the servers and even access them via the IP address
Run the command below before starting the VPN to get the default route
netstat -nr | grep default
Then run the following to re-add the default route.
route add default xxx.xxx.xxx.xxx
BUT there is no way that I can find to fix the DNS entry.
We tried re-adding the DNS entries in the /var/run/resolv.conf and then restarting the DNS service
$ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
Password:
$ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist
BUT THIS DOES NOT WORK!
If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
Here is a link to the same issue at Cisco.
https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Client Drive Mapping (Windows) not working in SGD 4.6

I've upgrade your sgd 4.5 to 4.6. Currently we are using Virtual Desktop Connector 1.0 with VMware.
Now I'm ran into a problem with client drive mapping for Windows. CDM has changed in 4.6 from smb to rdp-protocol. So there ist no need for the Enhancement Module on the client.
CDM works well with Windows Server 2003 R2 Terminal Services, but not with Windows XP SP3. In XP there are not clientdrives in explorer. Opening \\tsclient I can see the clientdrives e.g. +\\tsclient\F (rw)+. But when I try to open the folder I get an error, telling me that I didn't have enough rights to access this share.
This happens with a regular VDI-VM (in domain) and to a fresh standalone VM. Also a direct rdp-connect to the vm from Win XP and Win 7 Remote Desktop Client works (local drives are mapped).
Is there any known problem with sgd 4.6 cdm and win xp?
I didn't find any error in the logfiles, but perhaps I didn't look in the right logs. :-)
Thomas

We've just encountered this issue on a SGD 4.6 & Oracle VDI 3.2.1 deployment (XP Desktops), disappointed because we moved from 4.5 to 4.6 due to the expired Verisign cert therein.
Connecting to a 2008R2 Domain controller is fine, no problem and drives mapped as expected.
Have logged a service request, hopefully I've missed something obvious.

HT1338 I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

Did you try the driver from this Epson page: Epson Perfection 4490 Photo, Drivers & Downloads - Technical Support - Epson America, Inc.
OT

No client certificate available, sending empty certificate message

Dear Experts,
    I am trying to establish SSL client certificate connection to external partner. What puzzles me is that the certificate is not picked up by SAP PI. The intermediate and root CA for the partner are OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign,OU=VeriSign International Server CA - Class 3,OU=VeriSign, Inc.,O=VeriSign Trust Network and OU=Class 3 Public Primary Certification Authority,O=VeriSign, Inc.,C=US, respectively. You will be able to spot them in the Accepted Certificate Authority list, yet PI insists on sending empty certificate.
    Below is trace gathered from J2EE default trace. Please help shed some light
Date : 11/16/2011
Time : 8:49:11:423
Message : additional info ssl_debug(9): Starting handshake (iSaSiLk 4.3)...
ssl_debug(9): Sending v3 client_hello message to preprod.connect.elemica.com:443, requesting version 3.2...
ssl_debug(9): Received v3 server_hello handshake message.
ssl_debug(9): Server selected SSL version 3.1.
ssl_debug(9): Server created new session 22:E7:C0:9E:C1:D2:78:83...
ssl_debug(9): CipherSuite selected by server: TLS_RSA_WITH_AES_256_CBC_SHA
ssl_debug(9): CompressionMethod selected by server: NULL
ssl_debug(9): Received certificate handshake message with server certificate.
ssl_debug(9): Server sent a 1024 bit RSA certificate, chain has 2 elements.
ssl_debug(9): ChainVerifier: No trusted certificate found, OK anyway.
ssl_debug(9): Received certificate_request handshake message.
ssl_debug(9): Accepted certificate types: RSA, DSA
ssl_debug(9): Accepted certificate authorities:
ssl_debug(9):   CN=QuoVadis Global SSL ICA,OU=www.quovadisglobal.com,O=QuoVadis Limited,C=BM
ssl_debug(9):   CN=AAA Certificate Services,O=Comodo CA Limited,L=Salford,ST=Greater Manchester,C=GB
ssl_debug(9):   CN=CSF - Classe III - Sign et Crypt,OU=Certification Professionnelle,O=Autorite Consulaire
ssl_debug(9):   CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions, Inc.,O=GTE Corporation,C=US
ssl_debug(9):   CN=Entrust.net Certification Authority (2048),OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.),O=Entrust.net
ssl_debug(9):   CN=DPWN SSL CA I2 PS,OU=I2 PS,O=Deutsche Post World Net
ssl_debug(9):   CN=CSF,O=Autorite Consulaire
ssl_debug(9):   C=BE,O=GlobalSign nv-sa,OU=RootSign Partners CA,CN=GlobalSign RootSign Partners CA
ssl_debug(9):   CN=Dell Inc. Enterprise Utility CA1,O=Dell Inc.
ssl_debug(9):   EMAIL=premium-server(a)thawte.com,CN=Thawte Premium Server CA,OU=Certification Services Division,O=Thawte Consulting cc,L=Cape Town,ST=Western Cape,C=ZA
ssl_debug(9):   CN=TC TrustCenter Class 2 L1 CA XI,OU=TC TrustCenter Class 2 L1 CA,O=TC TrustCenter GmbH,C=DE
ssl_debug(9):   CN=VeriSign Class 3 Extended Validation SSL SGC CA,OU=Terms of use at https://www.verisign.com/rpa (c)06,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   OU=VeriSign Trust Network,OU=(c) 1998 VeriSign, Inc. - For authorized use only,OU=Class 3 Public Primary Certification Authority - G2,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=TC TrustCenter SSL CA I,OU=TC TrustCenter SSL CA,O=TC TrustCenter GmbH,C=DE
ssl_debug(9):   CN=Entrust Root Certification Authority,OU=(c) 2006 Entrust, Inc.,OU=www.entrust.net/CPS is incorporated by reference,O=Entrust, Inc.,C=US
ssl_debug(9):   CN=VeriSign Class 3 International Server CA - G3,OU=Terms of use at https://www.verisign.com/rpa (c)10,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=Meijer ipprod,OU=IT,OU=Merch,O=Meijer Stores Limited,L=Walker,ST=MI,C=US
ssl_debug(9):   CN=COMODO Certification Authority,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
ssl_debug(9):   OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign,OU=VeriSign International Server CA - Class 3,OU=VeriSign, Inc.,O=VeriSign Trust Network
ssl_debug(9):   CN=UTN - DATACorp SGC,OU=http://www.usertrust.com,O=The USERTRUST Network,L=Salt Lake City,ST=UT,C=US
ssl_debug(9):   CN=Deutsche Telekom CA 5,OU=Trust Center Deutsche Telekom,O=T-Systems Enterprise Services GmbH,C=DE
ssl_debug(9):   CN=TC TrustCenter Class 2 CA II,OU=TC TrustCenter Class 2 CA,O=TC TrustCenter GmbH,C=DE
ssl_debug(9):   CN=VeriSign Class 3 Secure Server CA - G2,OU=Terms of use at https://www.verisign.com/rpa (c)09,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign,OU=VeriSign International Server CA - Class 3,OU=VeriSign, Inc.,O=VeriSign Trust Network
ssl_debug(9):   CN=Thawte SGC CA,O=Thawte Consulting (Pty) Ltd.,C=ZA
ssl_debug(9):   CN=Bertschi CA,O=Bertschi AG (Schweiz),L=Duerrenaesch,ST=Switzerland,C=CH
ssl_debug(9):   CN=Cybertrust SureServer CA,O=GlobalSign Inc
ssl_debug(9):   CN=VeriSign Class 3 Secure Server CA,OU=Terms of use at https://www.verisign.com/rpa (c)05,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   EMAIL=server-certs(a)thawte.com,CN=Thawte Server CA,OU=Certification Services Division,O=Thawte Consulting cc,L=Cape Town,ST=Western Cape,C=ZA
ssl_debug(9):   CN=Mark Van Hamme,O=Brain2 BVBA,L=Brussels,ST=Brabant,C=BE
ssl_debug(9):   CN=DigiCert High Assurance EV Root CA,OU=www.digicert.com,O=DigiCert Inc,C=US
ssl_debug(9):   EMAIL=bis.at(a)siemens.com,CN=bis.siemens.at,OU=SBS ORS EDO,O=Siemens Business Services,L=Vienna,ST=Vienna,C=AT
ssl_debug(9):   CN=VeriSign Class 1 Public Primary Certification Authority - G3,OU=(c) 1999 VeriSign, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=mail2.adr-logistics.hu,O=ADR Logistics Kft.,L=Gyu00E1l,ST=Pest,C=HU
ssl_debug(9):   EMAIL=brent.kemp(a)sscoop.com,CN=bacchusdevp.sscoop.com,OU=IS,O=Southern States Cooperative Inc,L=Richmond,ST=VA,C=US
ssl_debug(9):   CN=Cybertrust SureServer Standard Validation CA,O=Cybertrust Inc
ssl_debug(9):   OU=Go Daddy Class 2 Certification Authority,O=The Go Daddy Group, Inc.,C=US
ssl_debug(9):   CN=Certipost E-Trust Secondary Normalised CA for Legal Persons,O=Certipost s.a./n.v.,C=BE
ssl_debug(9):   EMAIL=cert(a)bit-serv.de,CN=BIT-SERV GmbH Root CA,O=BIT-SERV GmbH,C=DE
ssl_debug(9):   CN=SAP_elemica_tester
ssl_debug(9):   CN=GeoTrust Global CA,O=GeoTrust Inc.,C=US
ssl_debug(9):   OU=Class 1 Public Primary Certification Authority,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=GlobalSign Root CA,OU=Root CA,O=GlobalSign nv-sa,C=BE
ssl_debug(9):   CN=Montova Root CA,OU=Root CA,O=Montova,C=BE
ssl_debug(9):   CN=Baltimore CyberTrust Root,OU=CyberTrust,O=Baltimore,C=IE
ssl_debug(9):   CN=Dell Inc. Enterprise CA,O=Dell Inc.
ssl_debug(9):   CN=COMODO High-Assurance Secure Server CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
ssl_debug(9):   EMAIL=support(a)tamgroup.com,OU=Engineering,O=Tamgroup,ST=California,L=San Anselmo,C=US,CN=Tamgroup
ssl_debug(9):   CN=GlobalSign Organization Validation CA,O=GlobalSign,OU=Organization Validation CA
ssl_debug(9):   CN=Certinomis AC 1 u00E9toile,OU=0002 433998903,O=Certinomis,C=FR
ssl_debug(9):   CN=GlobalSign ServerSign CA,OU=ServerSign CA,O=GlobalSign nv-sa,C=BE
ssl_debug(9):   CN=QuoVadis Root CA 2,O=QuoVadis Limited,C=BM
ssl_debug(9):   CN=AddTrust Class 1 CA Root,OU=AddTrust TTP Network,O=AddTrust AB,C=SE
ssl_debug(9):   CN=Equifax Secure Global eBusiness CA-1,O=Equifax Secure Inc.,C=US
ssl_debug(9):   CN=GlobalSign Organization Validation CA,O=GlobalSign,OU=Organization Validation CA
ssl_debug(9):   CN=thawte Primary Root CA,OU=(c) 2006 thawte, Inc. - For authorized use only,OU=Certification Services Division,O=thawte, Inc.,C=US
ssl_debug(9):   CN=Certipost E-Trust Primary Normalised CA,O=Certipost s.a./n.v.,C=BE
ssl_debug(9):   CN=Thawte DV SSL CA,OU=Domain Validated SSL,O=Thawte, Inc.,C=US
ssl_debug(9):   OU=Equifax Secure Certificate Authority,O=Equifax,C=US
ssl_debug(9):   CN=preprod.connect.elemica.com,OU=CONNECTED SOLUTIONS,O=Elemica,L=Wayne,ST=Pennsylvania,C=US
ssl_debug(9):   CN=Certinomis - Autoritu00E9 Racine,OU=0002 433998903,O=Certinomis,C=FR
ssl_debug(9):   CN=DPWN Root CA R2 PS,OU=IT Services,O=Deutsche Post World Net,DC=com
ssl_debug(9):   CN=Thawte Test CA Root,OU=TEST TEST TEST,O=Thawte Certification,ST=FOR TESTING PURPOSES ONLY,C=ZA
ssl_debug(9):   OU=Class 3 Public Primary Certification Authority,O=VeriSign, Inc.,C=US
ssl_debug(9):   EMAIL=santiago.tolosa(a)eu.rhodia.com,CN=Rhodia Development CA,OU=ISF - WARTE,O=Rhodia,L=La Villette,ST=France,C=FR
ssl_debug(9):   CN=Entrust.net Secure Server Certification Authority,OU=(c) 1999 Entrust.net Limited,OU=www.entrust.net/CPS incorp. by ref. (limits liab.),O=Entrust.net,C=US
ssl_debug(9):   CN=DigiCert High Assurance CA-3,OU=www.digicert.com,O=DigiCert Inc,C=US
ssl_debug(9):   CN=Groep H. Essers TEST (99805D6DA33FCC1700010002),O=Montova,C=BE
ssl_debug(9):   serialNumber=07969287,CN=Go Daddy Secure Certification Authority,OU=http://certificates.godaddy.com/repository,O=GoDaddy.com, Inc.,L=Scottsdale,ST=Arizona,C=US
ssl_debug(9):   CN=VeriSign Class 3 Secure Server 1024-bit CA - G2,OU=Terms of use at https://www.verisign.com/rpa (c)09,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   serialNumber=10688435,CN=Starfield Secure Certification Authority,OU=http://certificates.starfieldtech.com/repository,O=Starfield Technologies, Inc.,L=Scottsdale,ST=Arizona,C=US
ssl_debug(9):   CN=Conextrade,OU=Swisscom IT,O=Swisscom AG,L=Zurich,ST=Zurich,C=CH,EMAIL=ccc.eTrade(a)swisscom.com
ssl_debug(9):   CN=b2bproto.basf-corp.com,OU=Corporate IS,O=BASF Corporation,L=Mount Olive,ST=New Jersey,C=US
ssl_debug(9):   CN=GlobalSign Domain Validation CA - G2,O=GlobalSign nv-sa,C=BE
ssl_debug(9):   CN=Swisscom Root CA 1,OU=Digital Certificate Services,O=Swisscom,C=ch
ssl_debug(9):   CN=GeoTrust DV SSL CA,OU=Domain Validated SSL,O=GeoTrust Inc.,C=US
ssl_debug(9):   EMAIL=!sysadmin(a)elemica.com,CN=www.elemica.com,OU=Connected Solutions,O=Elemica, Inc,L=Wayne,ST=Pennsylvania,C=US
ssl_debug(9):   CN=GeoTrust SSL CA,O=GeoTrust, Inc.,C=US
ssl_debug(9):   CN=RapidSSL CA,O=GeoTrust, Inc.,C=US
ssl_debug(9):   CN=Entrust Certification Authority - L1E,OU=(c) 2009 Entrust, Inc.,OU=www.entrust.net/rpa is incorporated by reference,O=Entrust, Inc.,C=US
ssl_debug(9):   CN=EAS,O=COMPUDATA EDI Dienstleister,C=CH,EMAIL=helpdesk.dl(a)compudata.ch
ssl_debug(9):   CN=GlobalSign Domain Validation CA,O=GlobalSign nv-sa,OU=Domain Validation CA,C=BE
ssl_debug(9):   CN=GlobalSign Primary Secure Server CA,OU=Primary Secure Server CA,O=GlobalSign nv-sa,C=BE
ssl_debug(9):   CN=AddTrust External CA Root,OU=AddTrust External TTP Network,O=AddTrust AB,C=SE
ssl_debug(9):   CN=Entrust Root Certification Authority,OU=(c) 2006 Entrust, Inc.,OU=www.entrust.net/CPS is incorporated by reference,O=Entrust, Inc.,C=US
ssl_debug(9):   CN=Thawte SSL CA,O=Thawte, Inc.,C=US
ssl_debug(9):   CN=Entrust Certification Authority - L1C,OU=(c) 2009 Entrust, Inc.,OU=www.entrust.net/rpa is incorporated by reference,O=Entrust, Inc.,C=US
ssl_debug(9):   CN=UTN-USERFirst-Hardware,OU=http://www.usertrust.com,O=The USERTRUST Network,L=Salt Lake City,ST=UT,C=US
ssl_debug(9):   EMAIL=vladimir.polak(a)esa.ch,CN=Vladimir Polak,O=Einkaufsorganisation des Schweizerischen Auto- und Motorfahrzeuggewerbes,C=CH
ssl_debug(9):   CN=IT Directions and Strategies,OU=ITDS EDI,ST=WI,C=US,L=Hartland,EMAIL=aklumpp(a)itdsllc.com,O=ITDS EDI
ssl_debug(9):   CN=Entrust Certification Authority - L1B,OU=(c) 2008 Entrust, Inc.,OU=www.entrust.net/CPS is incorporated by reference,OU=CPS CONTAINS IMPORTANT LIMITATIONS OF WARRANTIES AND LIABILITY,OU=AND ADDITIONAL TERMS GOVERNING USE AND RELIANCE,O=Entrust, Inc.,C=US
ssl_debug(9):   CN=GlobalSign Organization Validation CA - G2,O=GlobalSign nv-sa,C=BE
ssl_debug(9):   CN=VeriSign Class 1 Individual Subscriber CA - G3,OU=Persona Not Validated,OU=Terms of use at https://www.verisign.com/rpa (c)09,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=VeriSign Class 1 Individual Subscriber CA - G2,OU=Persona Not Validated,OU=Terms of use at https://www.verisign.com/rpa (c)05,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=TeleSec ServerPass CA 1,OU=Trust Center Services,O=T-Systems International GmbH,C=DE
ssl_debug(9):   CN=TC TrustCenter Class 3 L1 CA V,OU=TC TrustCenter Class 3 L1 CA,O=TC TrustCenter GmbH,C=DE
ssl_debug(9):   C=NL,ST=Zuid-Holland,L=Spijkenisse,O=De Rijke Transport,OU=ICT,CN=smtphost.derijke.com
ssl_debug(9):   CN=VeriSign Class 3 Secure Server CA - G3,OU=Terms of use at https://www.verisign.com/rpa (c)10,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9):   CN=Comodo Class 3 Security Services CA,OU=(c)2002 Comodo Limited,OU=Terms and Conditions of use: http://www.comodo.net/repository,OU=Comodo Trust Network,O=Comodo Limited,C=GB
ssl_debug(9):   CN=UTN-USERFirst-Hardware,OU=http://www.usertrust.com,O=The USERTRUST Network,L=Salt Lake City,ST=UT,C=US
ssl_debug(9):   OU=Starfield Class 2 Certification Authority,O=Starfield Technologies, Inc.,C=US
ssl_debug(9):   EMAIL=ftp(a)csx.com,C=US,O=CSX Corporation Inc,CN=CSX_CORPORATION_AS2_02062009
ssl_debug(9):   CN=EssentialSSL CA,O=COMODO CA Limited,L=Salford,ST=Greater Manchester,C=GB
ssl_debug(9):   CN=Network Solutions Certificate Authority,O=Network Solutions L.L.C.,C=US
ssl_debug(9):   CN=VeriSign Class 3 Public Primary Certification Authority - G5,OU=(c) 2006 VeriSign, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign, Inc.,C=US
ssl_debug(9): Received server_hello_done handshake message.
ssl_debug(9): No client certificate available, sending empty certificate message...
ssl_debug(9): Sending client_key_exchange handshake...
ssl_debug(9): Sending change_cipher_spec message...
ssl_debug(9): Sending finished message...
ssl_debug(9): Received alert message: Alert Fatal: bad certificate
ssl_debug(9): SSLException while handshaking: Peer sent alert: Alert Fatal: bad certificate
ssl_debug(9): Shutting down SSL layer...
Severity : Error
Category : /Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK
Location : com.sap.aii.messaging.net.HTTPClientConnection.call(Object)
Application : sap.com/com.sap.xi.rwb
Thread : SAPEngine_Application_Thread[impl:3]_0
Datasource : 7662250:E:\usr\sap\T37\DVEBMGS00\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 00505688007A006A0000005100001B8C0004B1CF78E9602A
Source Name : com.sap.aii.messaging.net.HTTPClientConnection
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : cc6d1cee0fec11e1c90200000074eaaa
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /Applications/ExchangeInfrastructure/AdapterFramework/SAPLibraries/SAPXDK
Resource Bundlename :
Session : 365
Source : com.sap.aii.messaging.net.HTTPClientConnection
ThreadObject : SAPEngine_Application_Thread[impl:3]_0
Transaction :
User : CPWONG
Dsr Root Context ID :
Dsr Connection :
Dsr Counter : -1

Hi ,
Is the above problem solved , can you share the solution.
Thanks

SGD (Tarantella) 4.0.903: Client Drive Mapping: Unknown Error 64

Hi,
Environment: SDG Server on SUSE 9 Enterprise
Windows Server 2003 SP1 (application server) with enhancement module installed.
I have the folowing issue with the SDG: The ClientDriveMapping Feature worked some time ago. But from one day to another it stopped working.
I tried all advices mentioned in the Troubleshooting Guid from the docs.
All Services seem to work.
If I use the ttatdm.exe tool on the W2k3 Server for debugging, I can see that it tries to map all of the client drives but fails with <Unknown Error 64>.
Any ideas are welcome...
Here is part of the debug log:
17:10:14 : 00000016: xxxx : WTSQuerySessionInformation dwLength = 2
17:10:14 : 00000016: xxxx : WTSServer::isDesktopSession returns 1
17:10:14 : 00000016: xxxx : Global\TTDMP-1-Reconnect
17:10:14 : 00000016: xxxx : Global\TTDMP-1-Disconnect
17:10:14 : 00000016: xxxx : Created server channel
17:10:14 : 00000016: xxxx : WTSVirtualChannelWrite returned 13 bytes
17:10:14 : 00000032: xxxx : 0x0042a220 01 00 01 00 04 00 73 6d 62 00 01 00 00 ......smb....
17:10:14 : 00000032: xxxx : ServerChannel::isDataAvailable WTSVirtualChannelRead returned 2 bytes
17:10:14 : 00000032: xxxx : 0x0042a864 01 00 ..
17:10:14 : 00000032: xxxx : TTDMServer::process waiting for the init reply
17:10:14 : 00000032: xxxx : TTDMServer:process got init reply version 1.0
17:10:14 : 00000032: xxxx : ServerChannel::isDataAvailable WTSVirtualChannelRead returned 190 bytes
...snip...
17:10:15 : 00000094: xxxx : TTDMServer::process messagecode 0 deviceid 0
17:10:15 : 00000094: xxxx : AddDevice
17:10:15 : 00000094: xxxx : Device name Z
17:10:15 : 00000094: xxxx : Display name Drive C for Administrator
17:10:15 : 00000094: xxxx : Device class 9
17:10:15 : 00000094: xxxx : Characteristics 0
17:10:15 : 00000094: xxxx : accessFlags 1
17:10:15 : 00000094: xxxx : Packet >> Packet nLength 0
17:10:15 : 00000094: xxxx : Packet >> Authentication type 1
17:10:15 : 00000094: xxxx : Packet >> Packet nLength 44
17:10:15 : 00000094: xxxx : URI smb://tarantella.xxx.yy/Drive C for Administrator
17:10:15 : 00000110: xxxx : Packet >> Packet nLength 20
17:10:15 : 00000110: xxxx : Packet >> Packet nLength 0
17:10:15 : 00000110: xxxx : Found service provider
17:10:15 : 00000110: xxxx : addDevice : Drive C for Administrator 0 smb://tarantella.xxx.yy/Drive C for Administrator
17:10:15 : 00000110: xxxx : Base64Buffer length = 20
17:10:15 : 00000110: xxxx : 0x009b16a0 59 57 52 74 61 57 35 70 63 33 51 31 4e 44 41 32 YWRtaW5pc3Q1NDA2
17:10:15 : 00000110: xxxx : 0x009b16b0 4e 6a 41 3d NjA=
17:10:15 : 00000110: xxxx : Base64Buffer length = 20
17:10:15 : 00000110: xxxx : 0x009b16a0 4e 31 46 4c 57 55 70 66 53 45 34 74 4a 55 45 35 N1FLWUpfSE4tJUE5
17:10:15 : 00000125: xxxx : 0x009b16b0 53 55 55 3d SUU=
17:10:15 : 00000125: xxxx : URI host tarantella.xxx.yy
17:10:15 : 00000125: xxxx : URI file Drive C for Administrator
17:10:15 : 00000125: xxxx : Share = \\tarantella.xxx.yy\Drive C for Administrator
17:10:15 : 00000125: xxxx : Packet >> Packet nLength 5
17:10:15 : 00000125: xxxx : General options flags 8
17:10:15 : 00000125: xxxx : Alternative name = W:
17:10:15 : 00000125: xxxx : Packet >> Packet nLength 3
17:10:15 : 00000125: xxxx : DEVICE_CLASS_FILESYSTEM
17:10:15 : 00000125: xxxx : device flags 2
17:10:15 : 00000125: xxxx : Device info : Dos name = , search = 1, searchUp = 1
17:10:15 : 00000297: xxxx : Add device failed with Unknown error 64
17:10:15 : 00000297: xxxx : failed to add device
Cheers

I experienced this as well and fixed this by changing firewall settings (fw between sgd and w2k3 appserver)
Do you have a firewall (or other device) between sgd and w2k server.
If a intermediate device responds somehow on port 445 to the w2k3 server then it will try to use the wrong protocol (by default) to map the sgd drives. sgd cdm only uses port 137/139 to show drives to their clients.
Regards,
Erik.

ODBC instant client driver rpm for Linux X64

Hi,
Can anyone tell me where can I find odbc instant client driver rpm for Linux X64 edition.
I can only see for Linux x32 not for X64.
Edited by: user11128035 on Sep 6, 2009 3:13 AM
Edited by: user11128035 on Sep 6, 2009 3:15 AM

I don't understand your step 7 (the first step 7, actually).
What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
unixODBC should be installed after step 5.
I guess that that is the cause of your problem.
isql is not linked against readline at all on my RHEL 5 system.
Do you notice any improvement after removing the files from that tar.bz file?
Yours,
Laurenz Albe

[Anyconnect 3.0] "The VPN client driver has encountered an error"

Hi,
A computer get the following error when trying to connect: "The VPN client driver has encountered an error."
In setupapi.log, we got this error:
#-147 Loading class installer module for "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows".
#E358 An unsigned or incorrectly signed file "C:\WINDOWS\system32\NetCfgx.dll" for driver "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows" blocked (server install). Error 0x800b0100: No signature was present in the subject.
#E161 Processing of call to class installer failed. Error 0x800b0100:
No signature was present in the subject.
I already tried those solutions :
- install this fix http://support.microsoft.com/kb/822798
- repair catalog system http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00809b4754.shtml#asdqw
Do you know a solution?
Thanks for your help,
Patrick

Kashish,
The user who got this problem solved it by replacing C:\WINDOWS\system32\NetCfgx.dll by another NetCfgx.dll file.
He downloaded it from Internet (users don't fear )) but I would advice you to pick one from another computer...
I think that his computer was corrupted...
HTH
Patrick

Client Driver availability

Similar Messages

Maybe you are looking for