CLIENT EXIT Variable Query designer.

Hi Experts,
I need some information about this.
Does anybody have any tutorial about this or know where can i get it? Saphelp would be ok too, but i can't find anything about this there.
Thank-you!

OK, let's try if [this|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5] will help you.
There are additional directions to other documents in this PDF.
Sample code can be found in [BW Expert|http://www.bwexpertonline.com/downloads/Hong-Bitra%20User%20Exit%20Code%20Download.doc] which I found [here|http://www.bwexpertonline.com/downloads.cfm?session=]

Similar Messages

Customer Exit in Query Designer

Hi,
I have to build a query in QD 7.0 which schould cotain the Countries (Hierarchy) in the Rowes and Revenue % in the Columns.
I have to show the revenue% in three catagory: >30%, 10-30% and <10% with sum for each catagory, somehow like this:
Greater than 30%
usa 40%
can 31%
sum
Between 10-30%
IT 20%
CA 21%
sum
Less than 10%
DE 9%
FR 8%
sum
Total sum
I know that can be done with Customer Exit, but can any one tell me how to do it und how should the Customer Exit look like. I have not too much experience ABAP, or may be some one has another idea.
Thanks for any help in advance

Hi Martin,
Why you want to go for customer exit ??
I hope that revenue %ge is a calculated key figure. And you have to place Revenue depending on its value under proper column. Is this what u are luking for ?
If so then u can create busckets for the 3 categories and place the revenuce of particular country under proper category without using customer exit.
Create 3 different calculated key figure namely >30%, 10-30% and <10%.
write below formula; for e.g in <10 %
(revenue < 10) * revenue
(Im taking into consideration that revenue is a calulated key figyure)
Will help u in more better way once u clear your requriement.
Thanks
Dipika

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

Combine two reports in query designer

Hi experts,
i want to ombine two reports which are using key figure with sap exit in query designer
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi,
Have you tried APD?
You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
In APD, you can take input from two queries, then combine them and load to another object (DSO).
[Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
[AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
Let me know where you r stuck...
Regards,
Ashish

Terminate:Activity failed; there is no back end error log. - Query Designer

Hello all,
Has anyone encountered this erro before while using query Designer. I am trying to drag an infoobject in the rows section and I get this STOP error in message section at the bottom.
Terminate: Activity failed; there is no back-end error log [A006(R9E)]
Diagnosis
An error occurred in the back end.
System Response
An error occurred in the back end for which there is no error message. You cannot continue to work.
Procedure
Exit the Query Designer and correct the error on the back end.
Then start the query designer again.
Procedure for System Administration
I dont get what is going wrong here,
Thanks,

hi,
There may be some problems with the connectivity in the box which you have logged in or in the excel properties itself. Try to login again and see if the problem is resolved else contact the BASIS or admin.
Thanks,
vrrp.

Exclude a hierarchy node by using exit variable (not in query designer)

Hi gurus!!
I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
I am trying to solve it by using an exit variable:
Varible Type: Hierarchy Node
Processing : Exit
On the exit, I have entered the following code:
      IF ( sy-subrc = 0 ).
          l_s_range-sign = 'E' .
          l_s_range-opt = 'EQ' .
          l_s_range-low = 'AJUSTES'.
          APPEND l_s_range TO e_t_range.
     ENDIF.
But unfortunately does no work!!
Any ideas?
Thanks in advance
Regards.
Carmen Rodríguez

Hi,
Check the below link gives good knowledge on variables:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
Reg
Pra

How to create/use SAP Exit variable of Query designer

Hello experts,
Can you please guide me on how to create/use SAP Exit variables ?
Is there any way we can transport customer exit include in which we write all codes related to customer exit variables?
Kindly provide your valuable inputs on this.
Thanks,
Mitesh

Hello Gautam,
I think you should first implement the user-exit via the transaction SMOD/CMOD and the SAP-Enhancement RSR00001 User-Exit ( BW Reporting )
For the concrete implementation I would suggest to encapsulate the variables, as it is described here
Easy implementation of BEx-Userexit-Variables
and here: BEx-Userexits reloaded
Kind regards,
Hendrik

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

Customer exit variable in Report designer

Hello,
I have created one Customer Exit variable ( variable ready for input) for one of the characteristics in a query. However, when i execute this query in Report designer, the selection variable is not appearing. It is just taking the variable value from Exit, eventhough the variable is ready for input.
Is it a standard behavior or am i missing anything ?
Ravi

Hello,
First check your variable is included in the report desinger or not
if it is included in Filters, use the T-code RSRT2 and execute. You should get a variable screen.
Debug your query here.
Hope it is useful.
Thanks,
Ashok

Understanding complex query with selections(customer exit variables)

Hi experts,
I am trying to understand one query having a combination of selections and BEx variables in it.
In Characteristic Restrictions panel of Query Designer:
we have some CHARs restricted by means of authorisation variables
In Default Values panel:
some other CHARs without any filters
In free CHARS panel
some characteristics
In Rows panel:
some more chars that were placed in Default values panel
In Columns panel:
Formula YTD on selection YTD
Formula Monthly on selection Monthly
Selection on YTD characteristic(hidden)
Selection on Monthly characteristic(hidden)
Selection XX(in definition,I saw selection on YTD Keyfigure and a characteristic variable VAR1(i-step=1) filled with customer exit..this variable picks up right version of Master Data...our system has many versions of master data,one for each year)
Selection YY(in definition,I saw selection on Monthly key figure and the same characteristic variable VAR1 we used in Selection XX)
When I execute this..I see one variable popup which asks for values for year and version of master data...I enter master data version for that year and the year....I see the result...
Now I tried to experiment to learn...I deleted Selection XX and Selection YY and tried to execute....a variable popup asking for year...I enter year and tried to execute..it throws message---'Value for variable VAR2 cannot be determined'......
I couldnot understand this error because VAR2 is a customer exit characteristic variable defined in CMOD...ITS NEVER USED IN THIS QUERY...but defined in CMOD to pick up correct version of Master data..its defined in such a way that it picks value depending upon VAR1 varaible....both variables function is same...its just that VAR1 works on i_step=1 and VAR2 works on i_step=2 plus dependent on VAR1....
Can anyone understand why I am seeing error about VAR2 when its never used in Query....??
Thanks for your inputs....

Hi Vikram,
I am unable to find VAR2 anywhere in query designer....Can it be like that its hidden?
Thanks and Rgds,
SChand

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Conflict with text variable on Query Designer

Hi,
this is the scenario:
- On Query Designer i got two restricted key figures: K1 and K2.
- I'm usign a manual entered variable for 0CALMONTH.
- On K1 the sales are restricted for the selected month.
- On K2 the sales are restricted to a range between first month of the year, and the selected month-1.
Then on a formula i use K1+K2 and a text variable (selected month) for the name of the column. Then, when running the query, the text for the variable can't be found. There is a conflict on text variable when using 2 restricted key figures on the formula.
How can i solve it ?
thx

Hi,
I assume that your text variable is of replacement type?
If it doesn't work you can create a new text variable of user exit type and derive its value using entered 0CALMONTH.
Best regards,
Eugene

Query Designer - Variables - Replacement Path

I need a help.
In one query I need to select some data from the current Period until yesterday.
In another query I need to select the same data, but from the current Month until yesterday.
I created 2 restricted key figures:
SEL_PERIOD restricts 0FISCPER by the variable 0FPER, wich is an exit SAP for current Period.
SEL_MONTH restricts OCALMONTH by the variable 0CMONTH, wich is an exit SAP for current Month.
Now in both RKFs I want to restrict 0CALDAY from the beginning of the Period or Month until yesterday.
I found this variable 0DAT, wich is an exit SAP for current day.
I'm trying to create an interval variable, type replacement path, with From Value not filled and To Value filled with 0DAT - 1.
But it doesn't work, Query Designer points that 0DAT is not an allowed source for the target variable.
And the documents that I searched state that "the target variable must represent a single value" and "the source variable must be input-ready".
Does anyone have a suggestion on how I can restrict 0CALDAY, for this specification ???
Thanks in advance.
César Menezes
Edited by: César Menezes on Jun 25, 2011 11:51 PM
I forgot an important point:
Sometimes I need current Period or Month, in other cases I need the same Period or Month from last Fiscal Year or Calendar Year.
No problem with 0FISCPER and 0CALMONTH, I can off-set the variables by -12.
But I would like a help on how to do it with 0CALDAY.
Example: today is 25.06.2011. In some cases I need to restrict until 24.06.2011, in other cases I need to restrict until 24.06.2010.

Hi Ceaser,
This is a generic explanation to your scenario. Please make some changes as per your requirement. Just to give you some idea......................
We need to manipulate u201CKey Dateu201D values to achieve required analytics.
Step 1: As a first step, create a variable on u201CSales Dateu201D (or whichever date is used for Sales Date) field (ZPDATE) with user input. It was meant to capture u201CKey Dateu201D through user entry.
Step 2: Create a restricted key figure on Sales & restrict it on u201CKey Dateu201D value to get first analytics need i.e. u201CSales on Dayu201D.
Step 3:Next step was to manipulate the value of u201CKey Dateu201D on which I could restrict u201CSalesu201D (Key Figure) again and again to get other values.
Step 4: Create a new variable (e.g. ZPUTMNTH) and assigned it to be filled up by Customer Exit. (For simplicity purposes only u201CMonth to Dateu201D value is explained below. Same procedure can be repeated to fulfill other needs. Though in code section, ABAP code is available for almost all the variables)
Create Variable
Step 5: Create one variable (ZPUTMNTH) for u201CMonth to Dateu201D with processing by u201CCustomer Exitu201D. This variable was created on u201CDateu201D characteristics.
Sample ABAP Code
*& Include ZXRSRU01
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
Data: v_loc_date type d.
Data: v_loc_date1 type d.
Data: v_loc(4) type c.
CASE I_VNAM.
to calculate "month to date" user input is "Calday" Key Date
WHEN 'ZPUTMNTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(6). "low value, e.g.YYYYMM (200606) part of key date (20060625)
L_S_RANGE-LOW+6(2) = '01'. u201C low value e..g. YYYYMM01 (20060601)
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to Calculate no of days up to "month to date" (user input Calday Key date)
WHEN 'ZDAYMTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW+6(2). "YYYYMMDD - DD will indicate the no of days
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate Previous year "month to date" (User input Calday u2013 Key date)
WHEN 'ZDAYPMTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-LOW(4) = L_S_RANGE-LOW(4) - 1. "low value previos year
v_loc_date = L_S_RANGE-LOW. "take input value in another variable
L_S_RANGE-LOW+6(2) = '01'.
L_S_RANGE-HIGH = v_loc_date. "high value = input, taken into another variable
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "year to date" (User input Calday u2013 key date)
WHEN 'ZPUTYEAR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
L_S_RANGE-LOW+4(4) = '0101'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "Previous year to date" (User input Calday u2013 key date)
WHEN 'ZDAYPYR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
L_S_RANGE-LOW(4) = L_S_RANGE-LOW(4) - 1. "low value previos year
v_loc_date = L_S_RANGE-LOW. "take input value in another variable
L_S_RANGE-LOW+4(4) = '0101'.
L_S_RANGE-HIGH = v_loc_date. "high value = input, taken into another variable
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate "Previous year" User input Calday u2013 key date
WHEN 'ZPYEAR'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
v_loc = LOC_VAR_RANGE-LOW(4) - 1.
L_S_RANGE-LOW = v_loc. "low value previos year
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
to calculate No of Days - "year to date"
WHEN 'ZYRDAY'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZPDATE'.
CLEAR L_S_RANGE.
v_loc_date1 = LOC_VAR_RANGE-LOW.
v_loc_date = LOC_VAR_RANGE-LOW(4). "low value, e.g.200001
v_loc_date+4(4) = '0101'.
L_S_RANGE-LOW = v_loc_date1 - v_loc_date. "get the difference between current date & first date of year
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
Save and Activate the Include.
Go back to Exit and activate again.
Go back to Project and activate again.
Variable (ZPUTMNTH) is ready (its values filled up with the manipulation of u201CKey Dateu201D) to be used in query to restrict Key Figure u201CSalesu201D on it and get u201CMonth to Dateu201D (MTD) Sales Value.
Regards,
Suman

Variable creation in query designer

Hi Experts,
In BW3.5 Query designer,when we create a new variable we have option "Processing By: Customer exit ".
I have created variable with this option for hierarchy but where should I change it in customer exist and how do I know/test whether it's calling customer exit FM?
I have read the documents but can anybody explain me in simple steps.

Hi,
Check the below link gives good knowledge on variables:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
Reg
Pra

SAP-Exit option not available in Query Designer

Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
Alexander

Hi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex

CLIENT EXIT Variable Query designer.

Similar Messages

Maybe you are looking for