Client Export Profiles

Hello all,
Could I please get your opinions on my situation.
I have been asked to take out Production system and make identical copies of it onto QA and DEV. I have installed all 3 systems and there has been plenty of development on all 3 systems, but the customer is now happy with the state of PRD and wants the 3 systems to be sync'd.
What I would like to do is to take a copy of the productive client and import the client into the DEV and QA systems.
What I would like to know is which profile should I use for the client export (SCC8) in order to get all the information from the Productive system, excluding the users.
Any inputs?
Thank you.

I have decided to go with SAP_ALL.

Similar Messages

  • Error in Client export/import

    Dear all
                     i have test system i would like to perform client export/import in single system correct if made a mistake
    i have export client which create 3 request namely SIDKOxxxxxx , SIDKTxxxxxx,SIDKXxxxxx .i had selected target SID as system same sid bcaz i have only one system
    then i login again with scc4 create new client and login in that sap* and pass then when i run command stms_import to import all three transport into that client as said my message server gets disconnected correct me i am wrong
    or i have to directely run scc7 bcaz the request already in /usr/sap/trans then these error won't occur  i have the back up of database
    now i am getting error oracle disconnected
    Regrards

    Dear Pavan
    I tried last night as you said i made new client as 300 in ides and copy user profile to that
    when i tried to configure stms by setting CTC =1 when i configure transport routes i don't find any client number
    to provide source and target client
    kindly send some screen shots if u have that would great support
    .Delete the existing TMS configuration.
    2.In 000 client by using the user ddic create TMS configuration using STMS.
    3.Click on the system, in transport tool tab add a parameter CTC and set it to 1.
    4.Now configure the transport routes, there you can find the client number in consolidation routes.
    5.Provide your source and destination client and create routes.
    Regards

  • Client export for ABAP programs, repository objects cross client objects

    Hello,
    Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
    Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
    I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
    Can anyone explain how this is done and if it is possible?
    Steps I performed:
    1] Exported Production client with profile SAP_EXPC
    2] Imported the 3 requests KT, KO, KX using command line
    tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
    tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
    tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
    3] After successful import ran scc7 which finished successfully
    Thank you

    You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
    But you cannot transport abap repository objects (abap programs) with a client copy.
    Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
    Cheers Michael

  • Client export SCC8 - ended with errors

    Hi All,
    It is very urgent. Please help!
    I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
    Command file......................... PRDKT00024
    Customizing data .....................X
    With application data................ X
    Initialize and recreate......... X
    Change documents are not copied
    Transport control program tp ended with error code 0008
    Transport program tp could not be started (RC= 0)
    Program ended with error or warning, return code: F
    Runtime (seconds) : 9,222
    End of processing: 21:04:45
    Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
    Is this a successfully export or not? please advise.
    thanks,
    bichloan

    Hi All,
    It is very urgent. Please help!
    I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
    Command file......................... PRDKT00024
    Customizing data .....................X
    With application data................ X
    Initialize and recreate......... X
    Change documents are not copied
    Transport control program tp ended with error code 0008
    Transport program tp could not be started (RC= 0)
    Program ended with error or warning, return code: F
    Runtime (seconds) : 9,222
    End of processing: 21:04:45
    Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
    Is this a successfully export or not? please advise.
    thanks,
    bichloan

  • Client Export ended with errors

    Hi All,
    It is very urgent.  Please help!
    I'm doing client export a Prod client and will import to a Dev client.  I run the export SCC8 in background.  The export job (SAP_ALL profile) was completed successfully in SM37.  However in SCC3, I received error "End with errors".  I drilled down the log then I see the following errors.
    Command file......................... PRDKT00024       
    Customizing data .....................X                
    With application data................ X                
    Initialize and recreate......... X                     
    Change documents are not copied                        
    Transport control program tp ended with error code 0008
    Transport program tp could not be started (RC=  0)     
    Program ended with error or warning, return code: F    
    Runtime (seconds)         :          9,222             
    End of processing: 21:04:45                            
    Could you please let me know if these are errors or they are okay to ignore?  The export created a transport file PRDKT00024  about 3GB.  I don't see the KX00024 and KO00024.
    Is this a successfully export or not?  please advise.
    thanks,
    bichloan

    In Al11 what does DIR_TRANS pointing to?
    Make sure you have enough space there as it will export the 2 files to the transport directory.
    Have you tried Remote Client Copy.
    Thanks
    Adil

  • Client copy using Client Export... Failed .. Need ur advice

    Hi guiys how ru all doin...
    I hope some one can help me oout in this issue.iam working on sap
    4.6c, windows 2003 server, oracle9.2.0.
    we need to take client copy from production client 300 to dev
    server using client export method so I have performed client
    copy using client export.these are the list of steps which i
    performed but still am facing an error.
    Checklists /prerequisites before doing client export :
    Source client i.e. Client 300 should be locked for all users
    except Administrator.
    Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
    Server.
    Inform Downtime to Users.
    At least 2 background work process should be there.
    Take Offline Backup of both Production server & Development
    server.
    Following Jobs rescheduled for next day for Client Export
    Process:
    1)Collector_for_performance_monitor
    2)Customer_evaluati on_information
    3)Error reporting
    4)Eu_out
    5)Vendor_evaluation_information
    6)Leave_en titlement
    Remove scheduled job from DB:
    1)Check opt
    2)Analyze tab
    Lock all users except administrator
    Change database mode from Archive to Non-Archive mode
    Logon in NCCSAPPRD in Client 300 the one which is to be Exported
    1.Enter Transaction SCC8
    2.Select the copy profile and target system NCCSAPDEV Server and
    other fields as necessary.
    3.Click on "Execute in Background" button.
    4.Click on the "Schedule job" button.
    5.Verify that all information is correct and click on YES
    button.
    6.Click on continue at the "Info Client Export" window.
    7.Specify the start time and click on SAVE.
    8.Specify an output device at the "Background print parameters"
    window and click on SAVE.
    9.Click on OK at the information window.
    Monitor the Client copy using transaction SCC3.
    when am going to transaction scc3 in that ->All transport
    requests ->Exports -> in that my source client 300 is there when
    am double clicking it its showing me list of how many times
    client export has been performed in that my date is also there
    when iam double clicking it and going to details tab this is wat
    the error which its giving....
    Log file:
    nccsapprd\sapmnt\trans\log\NCPET00968.NCP
    Preparation for export
    Transport request___: NCPKT00968
    System______________: NCP
    tp path : tp
    Version and Release: 305..15 46D
    Execution of the export pre-processing methods for request
    NCPKT00968
    Start:Sorting and compressing the object list
    End:Sorting and compressing the object list
    Start:Check for existence of inactive objects
    End:Check for existence of inactive objects
    End:Check for existence of inactive objects
    End:Creating project information
    Start:Writing nametab information for key entries
    End:Writing nametab information for key entries
    Start:Version creation of the objects of the request NCPKT00968
    End:Version creation of the objects of the request NCPKT00968
    Start:Adjusting the object directory for the objects of the
    request NCPKT00968
    End:Adapting the object directory for the objects of the request
    NCPKT00968
    Preparation for export
    End date and time : 200708104758
    Ended with return code: ===> 0 <===
    Mainexport
    Transport request___: NCPKT00968
    System______________: NCP
    tp path : tp
    Version and Release: 305..15 46D
    SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
    temp segment by 128 in
    SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
    segment by 128 in
    Incorrect export. Request is not imported.
    Main export
    End date and time : 20070810152923
    Ended with return code: ===> 12 <===
    This is the error which am getting in the transport log.
    I tried to perform 4 times client copy. the first 2 times i got
    the same error and the next 2 times it ended with return code
    ===> 4 <===.
    Plzz anyone help me out in this issue as i need to perform it
    again and this time i hope with ur help it should be
    successful.
    Waiting for ur replies
    Best regards

    The problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
    Check Note 3155 - Termination due to tablespace overflow
    Markus

  • RFC Error while client export

    Hi Guys,
    While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem
    Regards
    Ganesh

    Hello Ganesh,
    I had received the same kind of error once, we applied the following workaround
    Execute the client export in foreground. The client export at SAP level won't take much time and would get completed quickly.
    BUT yes, this does NOT mean that the Co-files & Datafiles are generated quickly.
    You will notice, that the file size & timestamp of cofile & datafile being updated. Once the timestap of the co-files & datafile stops you can be sure that the client export has completed.
    Incase you still want to find the RCA  of your problem, please send us the export log details.
    Regards,
    Ammey Kesarkar

  • Client Export and Import (Speacially Import Procedures)

    Dear All,
    I have requirement to copy my production client's all data to Quality System's client.
    What procedure should I follow?
    If I am going to export and Import. I am not getting followings's Steps 2.3 to 2.6.
    1. Client Export:
         1.1 Run SCC8
         1.2. Select Profile for desired copy type (Usually All SAP_ALL or user master only SAP_USER. You will need direction from  
                 the requester as to the correct selection here. Use Profile -> Display Profile to display profile details.)
         1.3. Select target System (or group)
         1.4. De- Select u201CTest Runu201D (If selected)
         1.5. Run Export
                - Up to 3 requests are created, depending on the data selected and available:
                I. u201CSIDKO00353u2033 for transporting client-independent data, if you have selected this
                II. u201CSIDKT00353u2033 for transporting client-specific data
                III. u201CSIDKX00353u2033 for transporting client-specific texts, provided texts are available in this client
         1.6.Monitor TP logs for errors and export files for growth
    2. Client Import:
        2.1. Create client (scc4)
        2.2. Login to client (sap* u2013 pass)
        2.3. Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer
        2.4. Highlight #1 and use u201CRequest -> Importu201D to launch import tool
        2.5. Monitor u201CIu201D file in OS u201C/usr/sap/trans/tmpu201D dir for progress info
        2.6. After Import is complete perform u201Cpost processing stepsu201D from client tool (SCC7)           So if you have 3 transport requests and the data has been exported successfully then go for an import in quality system
    Please let me know how will I  Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer, Highlight #1 and use u201CRequest -> Importu201D to launch import tool, Monitor u201CIu201D file in OS u201C/usr/sap/trans/tmpu201D dir for progress info and After Import is complete perform u201Cpost processing stepsu201D from client tool (SCC7) .
    Thanks for sharing knowledge.
    With Warm Regards
    Dharmendra

    Once u login to new client,
    to Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer
    go to STMS----> select the system
    At top menu select
    Extras --> Other Requests --> Add(here give the above created transport requests, 1 @ each time)
    once u add those 3 trasnport requests u need to import them.
    Highlight #1 and use u201CRequest -> Importu201D
    for that from top menu select  Request -> Import(Ctrl + F11)
    coming to SCC7. its a tcode. execute the tcode and see.
    Regards,
    Ravi

  • Client export/ import:  tp finished with error 16

    Hi folks,
    I am facing an error while doing client import. I was planning for QA refresh, but ultimately decided to do a client export/import from production to QA. Export in production completed in 3 minutes, db size is around 100 gb. Created a new client in QA and while importing the tp finished with return code 16. When I compared the Z tables with PRD system, there were no entries in the Z tables copied to QA.
    Can anyone suggest as what can be done for successful import or is there any alternative way to do this? This is required to be done asap.
    Regards,
    Sai R.

    Hi Sai,
    I don't know what you did here, because I do have NEVER seen an client export of 100GB in 3 minutes ! => I expect, that more or less nothing got exported ...
    Z-tables .... I do hope, that your QA System contains on these Z tables as well and you are only talking on the contents of the tables that you want to copy over ...
    => This works automatically if you use something like SAPALL profile or so (if the export is successful)
    You should at least export export files of 5-10% of your client size => 5-10GB - otherwise you should check the export first ...
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Client export terminates DBIF_PGNT_UNEXPECTED_CODE

    Hi Gurus,
    I have encountered with an Dump DBIF_PGNT_UNEXPECTED_CODE while Client Export through SCC8. When checked with File log of Client copy it displays the following in performance assistant .
    Customizing has created tables in other clients which only contain data from this client
    I am Using SAP_EXPA profile for Client export to Production Client. FYI Customizing and test Client are in the same box. Support pack level are same in both DEV and PRD boxes.
    Could you please advise.
    Thanks
    Anil

    Hi
    We never achieved this error, hope the belowed ones will help u.
    The error indicates the database interface error, the table is unable to retrieve from the database,  does any users are accessing the source system.
    while retriving the table, the procedure may failed.
    These might be the expectations.
    Regards
    Bhaskar

  • Speed up Client EXPORT and Client import

    Hi,
    how to speed up the client export/import process (from scc8/scc7)?
    There is no profile,if we want User master records and the client specific data. then can we over write the client 2times first with user master data and then followed by client specific import.
    Main requirement is to Export Production client Specific data and users with authorization as CLIENT EXPORT (finally we can import the requests generated by client export) after importing to DEV server once can use as Quality client.
    please give your valuable suggestions in having client export and import to make Quality client in DEV server.
    DEV and PRD patch levels are different (remote client copy will fail in RFC system comparison)
    request you to give your valuable inputs.
    thanking you in anticipation,
    best regards,
    Raghav

    Hi Chowdary,
    This is not a big issue.
    You please find the TR list which are not moved PRD.
    Goto PRD->STMS_IMPORT find the TR list (which are in white color symbol) not moved to PRD.
    Then ask the respective consultant about TRs. Then re-import the TR in QAS. The old configuration will be occured in QAS. The TR which is moved to QAS, Now also it will be in green color only.But just re-import it and get the confirmation form respective consultant.But the user details will not available.
    hope this is useful.
    Regards,
    Patan Thavaheer.

  • SYSTEM_NO_TASK_STORAGE during client export

    Hello all!
    I hope you can help me with this problem.
    I'm getting a SYSTEM_NO_TASK_STORAGE dump during a client export.
    My system is on Windows 2003 Std Server. I have 4gb of RAM and 20gb of Page file.
    My current isntance profiles is the following:
    enque/table_size                     8192                                     
    rdisp/max_wprun_time             1000                                     
    rsdb/cua/buffersize                  4000                                     
    rdisp/PG_SHM                        10000                                    
    rdisp/PG_MAXFS                    80000                                    
    rdisp/ROLL_SHM                    20000                                    
    rdisp/ROLL_MAXFS                20000                                    
    abap/heap_area_nondia       2000000000                               
    abap/buffersize                       600000                                   
    login/system_client                   600                                      
    zcsa/system_language              S                                        
    zcsa/installed_languages         DES                                      
    login/no_automatic_user_sapstar 0                                        
    SAPSYSTEMNAME               SMP                                      
    SAPGLOBALHOST        PRODSERVER                               
    SAPSYSTEM                           00                                       
    INSTANCE_NAME           DVEBMGS00                                
    DIR_CT_RUN   $(DIR_EXE_ROOT\$(OS_UNICODE\NTI386     
    DIR_EXECUTABLE        $(DIR_INSTANCE\exe                      
    PHYS_MEMSIZE                4090                                     
    rdisp/wp_no_dia                   10                                       
    rdisp/wp_no_btc                    5                                        
    icm/server_port_0     PROT=HTTP,PORT=80$$                      
    ms/server_port_0      PROT=HTTP,PORT=81$$                      
    rdisp/wp_no_enq                1                                        
    abap/heap_area_dia         2000000000                               
    rdisp/wp_no_vb                          2                                        
    rdisp/wp_no_vb2                      1                                        
    rdisp/wp_no_spo                       1
    Which values do I have to change?
    Thanks!
    Wadih Saad

    Hi Wadih saad,
    I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
    You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
    Make the available space and do the export it will work.
    Regards,
    Maheswaran J

  • O file not created during client export

    Hi,
    We are doing client copy via client export import.We used SAP_ALL client copy profile.  We were expecting 3 files O,T and X . But we got  only 2 files T and X.  We checked at the OS level , and client copy logs SCC3. SCC3 shows only two transport request created and OS level has only 2 set of files.
    Where is transport request O and its files?
    Then we proceed and did the import in target client. But import error happened, it showed import stopped because of ztable were missing from nametab. how to proceed the import? Without solving the O file problem we cannot do the import ?
    Thanks and Regards
    Syam
    Edited by: Syam on May 31, 2010 2:59 PM

    Mark,
    Thank you. Points provided.
    Hi All,
    Client copy completed.
    The SAP_EXPA worked fine, and we got O files also as a result. But we did not follow that method because we did not want to affect the system availability and data consistency of the other clients in the same SAP instance. Hence O file import is not done. We transported the missing  ztables to target system. We manually created the transport request using se03. Still we had problem while running scc7 after import. For this we used Note 1235955 after post processing
    Thanks and Regards
    Syam

  • Client Export has been cvcancelled

    Dear all,
    Pls check the below log , Client copy has been cancelled .
    Client export from 08.01.2011 23:57:43
    System ID............................ IRP
    R/3 Release.......................... 700
      Basis Support Package...............SAPKB70020
    Host................................. PRDAPP1
    Start in background............. .....X
    User................................. S2K_BASIS
    Parameter
    Source client........................ 320
    Source client user masters............320
    Copier profile:.......................SAP_ALL
    Table selection
    Command file......................... IRPKT00030
    Customizing data .....................X
    With application data................ X
    Initialize and recreate......... X
    Change documents are not copied
    You cannot transport client-specific objects
    Kindly advise

    Dear Sunil/All,
    I have tried Client export copy from PROD to QA (3 times) , failed due to file system over flow (usr/sap/trans --> 100%)
    pls check below SE01 log:
    Cross-system information for user S2K_BASIS
        Exports with Errors       No Further Transport
            IRP Production
                  IRPKT00036              Client Export of Client-Spec. Objects
                    IRP        Production
                               Pre-Export Methods                       09.01.2011 22:53:59    (0) Successfully Completed
                               Export                                   10.01.2011 00:02:57   (16) Canceled
                        Import steps not specific to transport request
                  IRPKT00035              Client Export of Client-Spec. Objects
                    IRP        Production
                               Pre-Export Methods                       09.01.2011 06:40:07    (0) Successfully Completed
                               Export                                   09.01.2011 08:20:41   (16) Canceled
                        Import steps not specific to transport request
                  IRPKT00034              Client Export of Client-Spec. Objects
                    IRP        Production
                               Pre-Export Methods                       09.01.2011 02:59:43    (0) Successfully Completed
                               Export                                   09.01.2011 04:28:54   (16) Canceled
                        Import steps not specific to transport request
    Now usr/sap/trans ---> 100% ,
    this time client copy ended with usr/sap/trans is 100% full.
    1,let me know what are unwanted files i can clean up from usr/sap/trans.
    2,The above Cancelled Client export created cofile and datafile ,
    shall i delete the cofile as well as data file of cancelled Client export?
    3,Again if i try to take Client export from PROD to QA , It will start
    new client copy or it will start from cancelled copy?
    4,PRDCIXI_svc:/usr/sap/transorg 36.00 36.00 0.00
    100% /usr/sap/trans , now the prod usr/sap/trans got full,how can i
    cleapup the space .
    Kindly advise

  • Short dump while client export

    Hi,
    I am trying to export a client from BI test system, I am getting the below message:
    InfoProvider ZSEBCST02 has been changed in the meantime
    Message no. UCM0142
    Diagnosis
    InfoProvider ZSEBCST02 is used in data basis QinetiQ Data Basis Management as the data target of data stream Totals Records. The InfoProvider has been changed since you last saved the data basis. Therefore, the definition of the data model of data basis QinetiQ Data Basis Management is now based on the state of the InfoProvider before it was last changed and may be obsolete.
    System Response
    The saved version of data basis QinetiQ Data Basis Management will remain active for now.
    Procedure
    Check the data model of data basis QinetiQ Data Basis Management as to whether adjustments need to be made to the changed definition of InfoProvider ZSEBCST02.
    Save data basis  QinetiQ Data Basis Management.
    The client export process does not start and it throws  a short dump:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          01.08.2008 11:05:02
    Short text
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Short text of error message:
    Program error(s)
    Long text of error message:
    Diagnosis
    A program error occurred.
    System Response
    Processing terminated
    Procedure
    Please notify SAP.
    Procedure for System Administration
    Technical information about the message:
    Message class....... "UGMD"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "CL_UG_MD_STORAGE_CHAR_LOCAL===CP" or "CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N"
    "IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "SFRNDEVSAP09"
    Network address...... "10.0.32.38"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "SFRNDEVSAP09"
    Database type..... "ORACLE"
    Database name..... "BI1"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Feb 4 2008 00:38:16"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 146
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 67037440
    Heap.... 0
    Page.... 24576
    MM Used. 58875536
    MM Free. 3966304
    User and Transaction
    Client.............. 100
    User................ "SUPERUSER"
    Language key........ "E"
    Transaction......... "SCC8 "
    Transactions ID..... "44B15FDD2C31F115B69C00151736FC1B"
    Program............. "CL_UG_MD_STORAGE_CHAR_LOCAL===CP"
    Screen.............. "SAPMSCC1 0121"
    Screen line......... 15
    Information on where terminated
    Termination occurred in the ABAP program "CL_UG_MD_STORAGE_CHAR_LOCAL===CP" -
    in "IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL".
    The main program was "SAPMSCC1 ".
    In the source code you have the termination point in line 491
    of the (Include) program "CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N".
    Source Code Extract
    Line
    SourceCde
    461
    APPEND ls_idx_sel TO lt_idx_sel.
    462
    ENDIF.
    463
    464
    ENDLOOP.
    465
    466
        set initial combination
    467
    LOOP AT lt_idx_sel ASSIGNING <ls_idx_sel>.
    468
    READ TABLE <ls_idx_sel>-t_idx INTO ld_idx_sel INDEX 1.
    469
    READ TABLE lt_sel ASSIGNING <ls_sel> INDEX ld_idx_sel.
    470
    READ TABLE lt_key INTO ls_key
    471
    WITH TABLE KEY fieldname = <ls_sel>-fieldname.
    472
    ASSIGN COMPONENT <ls_sel>-fieldname
    473
    OF STRUCTURE <ls_data>
    474
    TO <data>.
    475
    <data> = <ls_sel>-low.
    476
    ENDLOOP.
    477
    478
    lf_found = abap_true.
    479
    WHILE lf_found = abap_true.
    480
    481
          create entry for current key selection combination
    482
    TRY.
    483
    cl_finb_tr_tabu_tabkey=>create_c(
    484
    EXPORTING i_tabname          = ld_tabname
    485
    i_key              = <ls_data>
    486
    i_keyfields_filled = ld_keyfields_filled
    487
    i_keymode          = ld_keymode
    488
    IMPORTING e_tabkey           = ls_transport-tabkey ).
    489
             CATCH cx_root .
    490
    CATCH cx_finb_tr.              "N875173
    >>>>>
    MESSAGE x000(ugmd). ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    492
    CATCH cx_sy_dyn_call_error.    "N875173
    493
    MESSAGE x000(ugmd). ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    494
    ENDTRY.
    495
    496
    INSERT ls_transport INTO TABLE et_transport.
    497
    498
          proceed to next combination
    499
    CLEAR: lf_found,
    500
    ld_count.
    501
    502
    WHILE lf_found IS INITIAL.
    503
    504
    ADD 1 TO ld_count.
    505
    READ TABLE lt_idx_sel ASSIGNING <ls_idx_sel> INDEX ld_count.
    506
    IF sy-subrc IS NOT INITIAL.
    507
    EXIT.
    508
    ENDIF.
    509
    510
    READ TABLE lt_key INTO ls_key
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    1
    SY-TABIX
    2
    SY-DBCNT
    2
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    1
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    121_C
    SY-UCOMM
    DBAC
    SY-TITLE
    Client Export
    SY-MSGTY
    X
    SY-MSGID
    UGMD
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    1
    SY-DATUM
    20080801
    SY-UZEIT
    110457
    SY-XPROG
    SAPLSYST
    SY-XFORM
    SYSTEM_HOOK_OPEN_DATASET
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    14 METHOD       CL_UG_MD_STORAGE_CHAR_LOCAL===CP    CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N   491
    CL_UG_MD_STORAGE_CHAR_LOCAL=>IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL
    13 METHOD       CL_UG_MD_DISPATCHER_CHAR======CP    CL_UG_MD_DISPATCHER_CHAR======CM00J     6
    CL_UG_MD_DISPATCHER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
    12 METHOD       CL_UG_MD_BUFFER_CHAR==========CP    CL_UG_MD_BUFFER_CHAR==========CM00F     3
    CL_UG_MD_BUFFER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
    11 METHOD       CL_UG_MD_CHAR=================CP    CL_UG_MD_CHAR=================CM01M    59
    CL_UG_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
    10 METHOD       CL_UC_MD_CHAR=================CP    CL_UC_MD_CHAR=================CM00J    53
    CL_UC_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
    9 METHOD       CL_UG_MD_TR_CLIENTCOPY========CP    CL_UG_MD_TR_CLIENTCOPY========CM006    84
    CL_UG_MD_TR_CLIENTCOPY=>COLLECT_FIELDNAME_CONTENT
    8 METHOD       CL_UG_MD_TR_CLIENTCOPY========CP    CL_UG_MD_TR_CLIENTCOPY========CM001    41
    CL_UG_MD_TR_CLIENTCOPY=>IF_FINB_TR_METHOD_CLIENTCOPY~CC_COLLECT_OBJECTS
    7 METHOD       CL_FINB_TR_OBJECT_BASE========CP    CL_FINB_TR_OBJECT_BASE========CM00M    17
    CL_FINB_TR_OBJECT_BASE=>IF_FINB_TR_OBJECT_CC~CC_COLLECT_OBJECTS
    6 FUNCTION     SAPLFINB_TR_CC                      LFINB_TR_CCU02                         83
    FINB_TR_CC_EXIT_ANALYZE
    5 FORM         SAPLFINB_TR_CC                      LFINB_TR_CCF01                        688
    CC_ANALYZE_CLIENT_LOCAL
    4 FUNCTION     SAPLFINB_TR_CC                      LFINB_TR_CCU01                        196
    FINB_TR_CC_EXIT
    3 FORM         SAPLSCCR                            LSCCRF2K                              293
    RUN_EXITS
    2 FUNCTION     SAPLSCCR                            LSCCRU06                             1087
    SCCR_PERFORM_CLIENT_COPY
    1 MODULE (PAI) SAPMSCC1                            MSCC1I03                              482
    CHECK_MODE
    Chosen variables
    Name
    Val.
    No.      14 Ty.          METHOD
    Name  CL_UG_MD_STORAGE_CHAR_LOCAL=>IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL
    IT_SEL
    Table[initial]
    IF_COMPLETE
    2
    0
    0
    0
    IF_USE_MASK
    X
    5
    8
    0
    0
    IF_TEXT_ONLY
    2
    0
    0
    0
    ET_TRANSPORT
    Table[initial]
    ET_TRANSPORT_SEL
    Table[initial]
    LD_TABNAME
    T100A
    533342222222222222222222222222
    410010000000000000000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    <LS_DATA>
    00000000000000
    2222222222222222222222222222222222222222222222222333333333333332222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    LD_KEYFIELDS_FILLED
    01
    33
    01
    00
    00
    LD_KEYMODE
    G
    4
    7
    0
    0
    LS_TRANSPORT-TABKEY
    00000000000000
    2222222222222222222222222222222222222222222222222333333333333332222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    CL_ABAP_TABLEDESCR=>TABLEKIND_STD
    S
    5
    3
    0
    0
    %_PRINT
    000                                                                                0###
    2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SY-REPID
    CL_UG_MD_STORAGE_CHAR_LOCAL===CP
    4455454455545444544455444443334522222222
    3CF57FD4F34F2175F3812FCF31CDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SY-MSGID
    UGMD
    54442222222222222222
    57D40000000000000000
    00000000000000000000
    00000000000000000000
    SPACE
    2
    0
    0
    0
    SY-MSGNO
    000
    333
    000
    000
    000
    SY-MSGV1
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV2
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV3
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-XPROG
    SAPLSYST
    5454555522222222222222222222222222222222
    310C393400000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    No.      13 Ty.          METHOD
    Name  CL_UG_MD_DISPATCHER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
    IT_SEL
    Table[initial]
    IF_COMPLETE
    2
    0
    0
    0
    IF_USE_MASK
    X
    5
    8
    0
    0
    IF_TEXT_ONLY
    2
    0
    0
    0
    ET_TRANSPORT
    Table[initial]
    ET_TRANSPORT_SEL
    Table[initial]
    %_SPACE
    2
    0
    0
    0
    SY-REPID
    CL_UG_MD_DISPATCHER_CHAR======CP
    4455454454455454445544453333334522222222
    3CF57FD4F4930143852F3812DDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ME
    |
    | 3000C000 |
    | E0001C00 |
    | %_DUMMY$$ |
    |  |
    | 2222 |
    | 0000 |
    | 0000 |
    | 0000 |
    | ME->DO_LOCAL |
    |
    3000C000
    F0000C00
    %_PRINT
    000                                                                                0###
    2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    No.      12 Ty.          METHOD
    Name  CL_UG_MD_BUFFER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
    IT_SEL
    Table[initial]
    IF_COMPLETE
    2
    0
    0
    0
    IF_USE_MASK
    X
    5
    8
    0
    0
    IF_TEXT_ONLY
    2
    0
    0
    0
    ET_TRANSPORT
    Table[initial]
    ET_TRANSPORT_SEL
    Table[initial]
    %_SPACE
    2
    0
    0
    0
    SY-REPID
    CL_UG_MD_BUFFER_CHAR==========CP
    4455454454544455444533333333334522222222
    3CF57FD4F256652F3812DDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SCREEN
    %_AUTOTEXT003
    2545545455333222222222222222222222222222222222222222222222222222222222222222222222222222222222
    5F154F4584003000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.      11 Ty.          METHOD
    Name  CL_UG_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
    IT_SEL
    Table[initial]
    IF_COMPLETE
    2
    0
    0
    0
    IF_USE_MASK
    X
    5
    8
    0
    0
    IF_TEXT_ONLY
    2
    0
    0
    0
    ET_TRANSPORT
    Table IT_111628[0x404]
    CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_TRANSPORT
    Table reference: 13198
    TABH+  0(20) = 007B9174FE07000000E9F174FE07000000000000
    TABH+ 20(20) = 8E3300000CB401000000000094010000FFFFFFFF
    TABH+ 40(16) = 04E801000017000010000000A2278001
    store        = 0x007B9174FE070000
    ext1         = 0x00E9F174FE070000
    shmId        = 0     (0x00000000)
    id           = 13198 (0x8E330000)
    label        = 111628 (0x0CB40100)
    fill         = 0     (0x00000000)
    leng         = 404   (0x94010000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000108
    occu         = 16    (0x10000000)
    access       = 2     (ItAccessSorted)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 3     (user defined)
    cmpMode      = 3     (cmpSingleMcmpU)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xA0FBAD74FE070000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 48249 (0x79BC0000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0000000000000000
    collHook     = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    ET_TRANSPORT_SEL
    Table IT_126753[0x176]
    CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_TRANSPORT_SEL
    Table reference: 118
    TABH+  0(20) = B0315375FE070000C0294E75FE07000000000000
    TABH+ 20(20) = 7600000021EF010000000000B0000000FFFFFFFF
    TABH+ 40(16) = 04800400801B000010000000C1248001
    store        = 0xB0315375FE070000
    ext1         = 0xC0294E75FE070000
    shmId        = 0     (0x00000000)
    id           = 118   (0x76000000)
    label        = 126753 (0x21EF0100)
    fill         = 0     (0x00000000)
    leng         = 176   (0xB0000000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000132
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x60320F75FE070000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 53553 (0x31D10000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0000000000000000
    collHook     = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    %_DUMMY$$
    2222
    0000
    0000
    0000
    <LS_SEL>
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ME->DT_RFIELDNAME
    Table IT_126975[2x60]
    DATA=DT_RFIELDNAME |
    | Table reference: 5220 |
    | TABH+  0(20) = 309A0C75FE070000000000000000000000000000 |
    | TABH+ 20(20) = 64140000FFEF0100020000003C000000FFFFFFFF |
    | TABH+ 40(16) = 04E80100300B0000100000002A278001 |
    | store        = 0x309A0C75FE070000 |
    | ext1         = 0x0000000000000000 |
    | shmId        = 0     (0x00000000) |
    | id           = 5220  (0x64140000) |
    | label        = 126975 (0xFFEF0100) |
    | fill         = 2     (0x02000000) |
    | leng         = 60    (0x3C000000) |
    | loop         = -1    (0xFFFFFFFF) |
    | xtyp         = TYPE#000045 |
    | occu         = 16    (0x10000000) |
    | access       = 2     (ItAccessSorted) |
    | idxKind      = 1     (ItIndexLinear) |
    | uniKind      = 1     (ItUnique) |
    | keyKind      = 2     (table_line) |
    | cmpMode      = 3     (cmpSingleMcmpU) |
    | occu0        = 1 |
    | groupCntl    = 0 |
    | rfc          = 0 |
    | unShareable  = 0 |
    | mightBeShared = 0 |
    | sharedWithShmTab = 0 |
    | isShmLockId  = 0 |
    | gcKind       = 0 |
    | isUsed       = 1 |
    | isCtfyAble   = 1 |
    | >>>>> Shareable Table Header Data <<<<< |
    | tabi         = 0x6015FD74FE070000 |
    | pgHook       = 0x0000000000000000 |
    | idxPtr       = 0xA01BFD74FE070000 |
    | shmTabhSet   = 0x0000000000000000 |
    | id           = 53632 (0x80D10000) |
    | refCount     = 0     (0x00000000) |
    | tstRefCount  = 0     (0x00000000) |
    | lineAdmin    = 16    (0x10000000) |
    | lineAlloc    = 16    (0x10000000) |
    | shmVersId    = 0     (0x00000000) |
    | shmRefCount  = 1     (0x01000000) |
    | >>>>> 1st level extension part <<<<< |
    | regHook      = Not allocated |
    | collHook     = Not allocated |
    | ext2         = Not allocated |
    | >>>>> 2nd level extension part <<<<< |
    | tabhBack     = Not allocated |
    | delta_head   = Not allocated |
    | pb_func      = Not allocated |
    | pb_handle    = Not allocated |
    | <LS_SEL>-FIELDNAME |
    | ??? |
    | ?????? |
    | ?????? |
    | SY-SUBRC |
    | 0 |
    | 0000 |
    | 0000 |
    | LT_SEL |
    | Table[initial] |
    | LT_TRANSPORT |
    | Table[initial] |
    | LT_TRANSPORT_SEL |
    | Table[initial] |
    | %_SPACE |
    |  |
    | 2 |
    | 0 |
    | 0 |
    | 0 |
    | ME |
    |
    3000C000
    70008C00
    ME->DO_GUID_FIELD
    |
    | F0000000 |
    | F0000000 |
    | ME->DT_FDEP_INT |
    | Table IT_126944[1x124] |
    | DATA=DT_FDEP_INT
    Table reference: 215
    TABH+  0(20) = B0753A2EFF07000090203775FE07000000000000
    TABH+ 20(20) = D7000000E0EF0100010000007C000000FFFFFFFF
    TABH+ 40(16) = 04B701005009000001000000A2078C01
    store        = 0xB0753A2EFF070000
    ext1         = 0x90203775FE070000
    shmId        = 0     (0x00000000)
    id           = 215   (0xD7000000)
    label        = 126944 (0xE0EF0100)
    fill         = 1     (0x01000000)
    leng         = 124   (0x7C000000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000035
    occu         = 1     (0x01000000)
    access       = 2     (ItAccessSorted)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 3     (user defined)
    cmpMode      = 3     (cmpSingleMcmpU)
    occu0        = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 1
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x10753A2EFF070000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 27288 (0x986A0000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 1     (0x01000000)
    lineAlloc    = 1     (0x01000000)
    shmVersId    = 1380  (0x64050000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0043E873FE070000
    collHook     = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    <LS_FDEP>
    No.      10 Ty.          METHOD
    Name  CL_UC_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
    IT_SEL
    Table[initial]
    IF_COMPLETE
    2
    0
    0
    0
    IF_USE_MASK
    X
    5
    8
    0
    0
    IF_TEXT_ONLY
    2
    0
    0
    0
    ET_TRANSPORT
    Table IT_111628[0x404]
    ET_TRANSPORT_SEL
    Table IT_126753[0x176]
    %_SPACE
    2
    0
    0
    0
    SY-REPID
    CL_UC_MD_CHAR=================CP
    4455454454445333333333333333334522222222
    3CF53FD4F3812DDDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ME
    |
    | 3000C000 |
    | 70008C00 |
    | SYST |
    | ################################################ð#################################x#####XC#### |
    | 000000000000000000000000000000000000002000000000F000000000000000000000000000109000700000540000 |
    | 1010202000000000000020001000100000000080000000000000000000000000000000000000B00000800000830500 |
    | 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
    | 000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000000C |
    | %_DUMMY$$ |
    |  |
    | 2222 |
    | 0000 |
    | 0000 |
    | 0000 |
    | No.       9 Ty.          METHOD |
    | Name  CL_UG_MD_TR_CLIENTCOPY=>COLLECT_FIELDNAME_CONTENT |
    | IO_MSG |
    |
    A0005000
    F0000B00
    CT_OBJECT
    Table IT_43581[133x8]
    FUNCTION=FINB_TR_CC_EXIT_ANALYZEDATA=LT_TMP_OBJECTS
    Table reference: 3715
    TABH+  0(20) = 70438B74FE070000000000000000000000000000
    TABH+ 20(20) = 830E00003DAA00008500000008000000FFFFFFFF
    TABH+ 40(16) = 04720100D00400001B000000C1288001
    store        = 0x70438B74FE070000
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 3715  (0x830E0000)
    label        = 43581 (0x3DAA0000)
    fill         = 133   (0x85000000)
    leng         = 8     (0x08000000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000011
    occu         = 27    (0x1B000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 4     (cmpSingleEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xA0548C74FE070000
    pgHook       = 0x3066DB74FE070000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 24950 (0x76610000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 1105  (0x51040000)
    lineAlloc    = 1105  (0x51040000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    SYST-REPID
    CL_UG_MD_TR_CLIENTCOPY========CP
    4455454455554444454455333333334522222222
    3CF57FD4F42F3C95E43F09DDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    LT_FATTR
    Table IT_122877[1x294]
    CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_FATTR
    Table reference: 4265
    TABH+  0(20) = F0151175FE070000000000000000000000000000
    TABH+ 20(20) = A9100000FDDF01000100000026010000FFFFFFFF
    TABH+ 40(16) = 04E80100200C00000A000000A4058401
    store        = 0xF0151175FE070000
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id  

    "InfoProvider ZSEBCST02 has been changed in the meantime"
    1. Lock all users.
    2. Put all jobs on hold.
    3. Make sure that your upstream system (R/3, etc.) are not pushing data into BI.
    4. Cycle the BI system.
    5. Retry.

Maybe you are looking for