Client export request will not be imported

Hi,
I have run a client export via SCC8. In the transport log there is 1 error and the message 'EETP200 export with errors, request will not be imported'. Status is 12.
I have checked the log and the failure was due to a rollback segment not being large enough.
As the export took 22 hours to run and only 1 table failed out of approx 8000 is there any way that I can import the transport and then export the failed table again or do I have to increase the rollback segment and run the entire export again?
I've checked OSS and can't find anything on this.
Thanks - Janet

you can use program R3TRANS to export that one file.
SAP note 120906 does a similar job for multiple tables. have a look.

Similar Messages

Mail will not finish importing

I have had a problem with my mail for a few days. When I import my emails I get some them but then the email will not finish importing and I get an error message. I know there are more emails to be imported because I also get my mail on my Blackberry. And when I get them thru my broadband home page it all comes thru there. My mail just sits there and spins forever and errors out. HELP PLEASE!

Not sure what you mean. You appear to be calling “importing” what is actually downloading or retrieving mail from the server. Importing usually refers to bringing into Mail mailboxes that were stored somewhere else, by means of File > Import Mailboxes.
What type of mail account is this (POP, IMAP, .Mac)?
Also, what error message do you get? This is essential information that should always be provided. We aren’t in front of your computer to see what happens...
As a first step, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Try also turning OFF all the network port configurations except the one needed to connect to Internet and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.

Released request are not in import queue

Dear experts,
Released requests are not appearing in the import queue. They are not in the cofiles folder also. Can any one help me to get these requests in import queue.
rgds.....
Art

Hi,
Please go to SE01, select your request(s) and on the next screen click on the request. In the opened screen navigate to the properties tab and see what target system you have defined for the transport. If there is no definition, transport is considered as local and will not be released to cofile/data folders (but stays in E070). You have to define the correct target system as it's defined in TMS to make you request tranportable
Regards,
Mike

Exported movie will not play on other computer

I made my first FCE4 movie today asa test, just to get teh hang of the basics of LiveType and rendering effects. I exported as Quicktime Movie, and the .mov plays great on my MacBook.
I transferred the file to my Windows XP desktop, and the file will not play on any player at all, including quicktime. I have the latest version of Quicktime and VLC, and also Media Player Classics, and all of them will play the audio but no video. VLC gives an error of "VLC does not support the audio or video format "icod"."
Any help here? I also tried re encoding the movie using handbrake on windows, and handbrake will not recognize it either. I transferred the file to my PC a second time to account for data corruption during transfer and same result.

I imported a couple clips from a camcorder in AVCHD 1920x1080 29.97 fps.just added some effects such as an insect eye and an earthquake for experimentation purposes, along with a quicktime transition between the two clips. Also a LiveType sequence in the beginning.
Using "Export quicktime movie" will allow the video to play on either QT or FCE4 on the originating machine, no problem, but no other player on the originating machine can play the video (audio is fine), and no player at all including latest version of QT can play it on other machines. From reading it sounded like an issue of "make movie self-contained" was checked or unchecked but i have tried both ways and it didn't correct the problem.
I attempted to export with quicktime conversion. I have tried 3 different codecs, and different setting that retained the 16:9 ratio, and each time the clip gets cropped on both planes like a zoom effect even though it does indeed remain 16:9.

OMF file will export, but will not open

Hello
I need to export a sequence to an omf file. When I export to omf, it looks like it's exporting normally, but when I try to open the file, it will not open. Oh, and the icon after export is gray with no logo. Am I missing something?
Please help.
Thanks,
Anneita

The OMF file must be imported into an application
that can read OMF files.
Such as Logic Pro, Protools, Digital Performer, etc.,
i.e. a multitrack audio editor that specifically
supports OMF, (e.g. Protools LE won't, unless you
have the DV Toolkit installed). What/who were you
making the OMF for?
Thank you.
The video's audio consisted of voices only. I needed to export it to an omf file for an audio house. They were to sweeten up the voices to accompany a live orchestral performance at Symphony Hall in Boston. This was a last minute fix, as the performance was on the following day, so there was a crunch. As it turned out, THEY were able to open the omf file perfectly with whatever they were using, and were able to sweeten it up just fine.
Live and learn.
Thanks for all your input.

SAPUI5 App in Fiori Client - Double tap will not work.

Hi ,
I have developed a SAPUI5 app and when i try to access the app in an iPhone using the Fiori Client , the app works fine , but double tab will not work when i am in the app, double tap works when i am on the launchpad.
Please help.
i have used sap.m.splitapp and viz charts.
Thanks

Did you solve this? I have the same issue.

Keynote will not save imported images

i've NEVER had a problem with Keynote in the 8 years that I have been using it. Now, it will not save my imported images. I'm getting the equivalent of the RED X in PPT. Does anyone know why this is happening? I'd reinstall, but I no longer have disks...

There are two options, try option 1 first if that does not work use option 2:
1 - a custom repair for Keynote 6.1
Try this repair for iWork applications, its sorted out many similar problems in the past
ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using Appcleaner from Mac Update to      do this, its freeware
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped.
2 - Clean install Mavericks by      back up all your work and user files, repartition the hard drive,
then re-install Mavericks
To reinstall OS X, you must be connected to the Internet
Choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
If you’re not connected to the Internet, choose a network from the Wi-Fi menu (in the top-right corner of the screen).
Select Disk Utility, then click Continue.
Select your startup disk on the left, then click the Erase tab.
Choose Mac OS Extended (Journaled) from the Format menu, enter a name, then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X, click Continue, then follow the onscreen instructions.

ADSM AnyConnect Client Profile Editor will not close...

When I fire up ADSM and go into the AnyConnect Client Profile Editor It will not let me close the Editor.
If I go it and jsut hit cancel, or OK, or the X, nothing happens. The only way to exit is to Close down Java.
I've run ADSM on a few machines all with the same results.
ADSM Version 6.3(4)
Thanks

I Upgraded to ADSM 7.1(2)
This resolved my issue.

Iphone 5c will not auto import photos since its recent update help!!

I've just recently updated software on my iphone and it will not import photo's automatically as it used to. I can still use itunes and the phone backs up and syncs with the phone. My PC also has since come up with troubleshoot problems for my iphone and when I've investigated this it says it has no drivers for it and my pc cannot find drivers when searching for them I am currently using windows 7. I have tried a new cable and this has not made any difference at all. I have uninstalled itunes and reinstalled it and again no change. How can I get my phone to work again as it used to. At the moment I'm using icloud to get pictures off phone but I don't want to have to keep doing this as it takes so much longer. Any advice would be greatly appreciated as I've been hunting information and fiddling for the past month now and I'm becoming very frustrated. Thank you.

Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

Computer will not always import photos from kodak easy share?

My macbook pro does not always import photos from the kodak easysgare camera, any suggestions?

I found a solution in a couple of other threads. The main problem is when you start iPhoto from the dock, the unix process is owned by root, and not as it should be, by you. If you start iPhoto from the Terminal by entering /Applications/iPhoto.app/Contents/MacOS/iPhoto, iPhoto is able to import the images.
I don't believe that starting the applications from Terminal is a good solution, so I looked for another - reinstalling Leopard seems to be the best option, and it actually works. I can now import images to iPhoto again.

I have mac 10.9 version. Adobe photoshop Elements 12. I just got a new camera Nikon D4S. Photoshop elements will not upload/import my raw photos. i get a message that can not complete my request because the file appears to be from a camera model which

I have Mac version 10.9. Adobe elements 12. New camera Nikon D4s. I have uploaded DNG plug in 8.4. Tried to convert my raw photos and it still does not work. How can I upload raw photos taken with my Nikon D4S so that I can edit these photos?

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

Imported XDCAM footage "blacks out" on timeline and when exported, which will not do.

We're having a "horrendous problem" importing XDCAM. About half the clips "black out" while playing on the sequence timeline, although the associated sound files play fine. BTW the clips that black out always do so in the same place in the clip.
A first I thought the camera operator might have been covering the lens, but we can convert the MXF video to mp4 using Pavtube and video plays the entire length of the clip.
This problem happens in CS5, CS5.5, and CS6. It happens when we Import through using the Media Tool or the other way (whatever that's called).
When we EXPORT from the sequence the blackout occurs most of the time, although every once in a while the exported clip wll play in its entirety.
We have several hundred clips we need to use and the workaround is very cumbersome and time consuming, so we'd really like to solve the import problem so imported XDCAM clips work properly on the timeline.
To view the problem click below.
This encode plays the entire clip.
http://youtu.be/5ylb3ak1W5I
This encode made immediately after the one above blacks out
http://youtu.be/nlr7sV6kyQs
Does anyone have any idea what is going on and how to fix it?

Well...
The problem has been solved in a way that indicates that the problem should never have occurred.
We finally were able to borrow a XDCAM disc reader and the people we borrowed it from also incidentally provided a bit of software called "XDCAM Transfer". THAT software solved the problem.
I have spent many many hours reading on the Sony website, the Adobe website, and any other website I could find (next to my desk I have a 6" stack of printouts that I've read) and nowhere did I see this piece of software mentioned.
Once that software was installed it imported everything, even the files we already had on the local HDD.
Thanks everyone for all the attempts.
JP

Elements 11 will not properly import from hard drive video of 352 x 480. Audio is fine.

Hello All, I'm wanting to import VHS video that was burned to a DVD. Frame size is 352 x 480. Elements shows it, even after rendering, as very distorted video on the monitor panel. Audio is fine. Anybody here have an idea how to conform my video to the Project?

alexmorgan43
Thank you for the reply.
(Note: It would be better also to know...frame rate and progressive or interlaced video...NTSC or PAL setup...but for now....with some assumptions...
Although I have never run into a DVD-VIDEO video file with the 352 x 480 (4:3) resolution, it does exist apparently.
DVD-Video - Wikipedia, the free encyclopedia
From my perspective, if your client's goal is DVD-VIDEO format on DVD disc for this source, I do not see that Premiere Elements (any version)
is going to produce a DVD-VIDEO on DVD disc with video files 352 x 480 (4:3). It will give you (NTSC) 720 x 480 4:3 @ 29.97 interlaced frames per second
or (PAL) 720 x 576 4:3 @ 25 interlaced frames per second.
If your client can settle for your 352 x 480 (4:3) source exported to a file saved to the computer hard drive, then Premiere Elements 11 can give you a MPEG2.mpg
file with a 352 x 480 4:3 resolution.
But, assuming the NTSC DVD-VIDEO on DVD disc workflow....with Frame Width = 480 pixels and Frame Height = 352 pixels...But if this is really portrait rather than
landscape oriented video, then we have other considerations not mentioned below....and I suspect we may be going in that direction...the answers will be in the details...
1. Open Premiere Elements 11 to the Expert workspace. Go to File Menu/New/Project and Change Settings.
2. In Change Setting, select
NTSC
FLIP
Flip Mino and Ultra 29_97p
OK out of there. In the New Project dialog that next appears,
make sure that you have a check mark next to Force Selected Project Settings on This Project. OK out of there.
3. Back in the Expert workspace, import your VTS_02_1.VOB using the project's Add Media/Files and Folders to get
the file into Projects Assets from where it is dragged to the Timeline.
(Typically the DVD-VIDEO's video files start with VTS_01_1.VOB, but not always. This may be one of those not always times. Just
check that your video is represented in those video files (VTS_).
4. Edit, Add Menu if you want.
5. Publish+Share/Disc/DVC disc with preset NTSC_Dolby DVD for the NTSC DVD-VIDEO Standard 4:3 on DVD disc
@ 29.97 interlaced frames per second.
6. Moment of truth...what does that look like on your TV's DVD player.
Please review and consider and then we can fine tune if my assumptions did not meet your actual details.
Thanks.
ATR

ICal 4.0.1 will not save imported ics files - outlook works fine

I am not sure when this started happening because I haven't had to import a calendar event for a while. We recently switched over to Exchange 2007 and now with SL I can run in native exchange mode for iCal.
Ever since that, if I open a .ics calendar file, iCal will ask which calendar to open it with and then silently ignores the event. If I open the same .ics file in Outlook it opens, saves and the event will show up in iCal from the exchange server.
I've stripped the event down to the most bare elements making sure it wasn't a data format issue, still no go.
Any ideas on how to solve this? I'd hate to have to run parallels all the time just to accept events now...

I have what seems to be a similar issue. Are you having other issues like mine?
Macbook air      11-inch, Late 2010
                        4 GB 1067 MHz DDR3
Software           Mac OS X Lion 10.7.4 (11E53)
I have updated the latest combi update from the apple site and still have the same issue.
No matter what I try every time I restart my Mac all my preferences and applications reset. (Also preferences don't save when exiting the preference folder)
For example when in >system preferences>general -untick the 'restore windows when quitting and re-open apps' I exit preferences and then go back in to check it has automatically reticked the box.
I have deleted 2 applications several times (including removing the icon from the dock) and each time after restarting it shows a question mark on the dock where I had deleted it from.
On restart I loose downloads and history in safai.
On restart it re opens documents and applications I have quite even after unticking the restore applications on restart box (the one that comes up when shutting down or restarting)
I have been trying to solve this for a month now and it really is frustrating the **** out of me.
helpppp pleaseee...

Bridge CS6 photo downloader freezes and will not allow import.

Hello,
I'm running Windows 8 and CS6. Whenever I try and import images from an photo card, Photo Downloader freezes. Only way to get out of dialogue box is to X out. I cannot import or set up default folders, file names, etc.. This never happened to me on earlier versions of Bridge. Any ideas? Happy to provide more specifics if helpful or relevant.

Do you have another reader? USB dedicated to specific size is most reliable.
If not you can try from camera, although this is the most error prone.
Also, it is recommended by many that you do not delete and format card in computer, but this should be done in camera each time.

Client export request will not be imported

Similar Messages

Maybe you are looking for