Client export SCC8 - ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan
Similar Messages
-
Restarting Client export which ended with return code 8.
Hi guys,
I have performed an client export using SCC8 and the export ended with return code 8. stating the request cannot be imported. I have fixed the errors. I would like to know how do i restart the same export instead of doing a other client export. KIndly let me know as early as possible as it is very urgent.
NareshHi ,
Thanks for the reply, One of my colligue is telling no need of transport elements under the query. why means we copied (dev) one of our query and just changed the Variable to curent fiscalyear/period. now we to transport this query. My colligue is telling any way thos elements are there in old query , and telling no need to transport those. Is it correct or again we need to collect all those using elements in that query while transporting ?
we dont have access for SE03.
Thanks & Regards
Pcrao. -
Client Export ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanIn Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil -
Transport control program tp ended with error code 0211
Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
HarryDear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry... -
Transport control program tp ended with error code 0008
Hi !
I trying to realize an export of client like that :
Source Client 400
Target System: ASI
Copy Type Client Export
Profile SAP_RECO
Status Ended with Errors
User ST01051
Start on 17.06.2009 / 17:41:00
Last Entry on 18.06.2009 / 00:20:40
Transport Requests
- Client-Specific ASIKT00028
- Texts ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johanhai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a -
Releasing a Transport Request ends with error code 0012.
Hi,
We have a Development system and a Production System (both running on separate windows machine) but they are not connected in STMS. We perform transporting of Requests at o.s level and NOT through STMS.
We are facing this new problem - We are trying to release a Transport Request in SE01 and it ends with error code 0012. The task inside the Request is released without any error. There is no Notes in SAP Marketplace for this.
Test call of transport control program (tp) ended with return code 0012
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EFIK900025 pf=E:\usr\sap\trans\bin\TP_DOMAIN_EFI.PFL -Dtransdir=E:\usr\sa"
which checks the export requirements, returned the following information:
Return code from tp: 0012
Error text from tp: ERROR: Buffer check failed.
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
Please help.
Regards,
Mohan.Hi Mohan,
Nice to hear that that your problem is resolved.
For Pamater CTC, please check the below links:
Automatic transport between DEV clients ?
http://sapsolutions.searchsap.com/kw;ExtendedTransportControl/content-sap.htm
Regards,
Hari Kishan -
Program ended with error or warning, return code: F
Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations. -
Tp program ended with error code 0012
during export client from PRD to QAS i got the following error
3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "20:13:54"
2 ETA090 Command file for "tp" is written under: "PRDKT00029" "20:25:04"
2 ETA091 For client transport, " 55,612" entries entered in command file
2 ETA090 Command file for "tp" is written under: "PRDKX00029" "20:25:04"
2 ETA091 For client transport, " 419" entries entered in command file
2 ETA375 Transport program TP started successfully for "PRDKX00029" "20:25:05"
1 EXT200 Transport control program tp ended with error code "0012""A tool used by tp aborted""EXPORT PRDKT00029 client500 U18 pf=/usr/sap/tr
1 ETA377 Error exporting request "PRDKT00029" "20:54:04"
1 ETA146 Program ended with error or warning, return code: "F"
1 ETA027 Runtime (seconds) : " 2,455"
1 ETA152 End of processing: "20:54:04"
any can help me
ThanksHi Ehab,
Yes !..
ALOG and SLOG can help analyze the problem and provide you the possible solution...
Make sure that you are using updated KERNEL and TP program before exporting the client..
Regards.
Rajesh Narkhede -
Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5
My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393} 2013-10-14 21:53:00:256-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1} 2013-10-15 04:15:54:069-0700 1 162 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Download Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF} 2013-10-15 12:10:38:196-0700 1 193 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C} 2013-10-15 12:15:25:676-0700 1 183 101 {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3} 201 0 AutomaticUpdates Success Content Install Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0} 2013-10-15 12:15:25:766-0700 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D} 2013-10-15 19:29:31:486-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65} 2013-10-15 19:29:49:702-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D} 2013-10-15 19:30:05:744-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418} 2013-10-15 19:30:08:753-0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 ChkWuDrv Success Software Synchronization Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD} 2013-10-15 20:00:05:044-0700 1 183 101 {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6} 501 0 wusa Success Content Install Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D} 2013-10-16 00:11:39:832-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 c8000247 AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End! -
The report l runs very night and gets ended with error
Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command Prog. type Spool list Parameter User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_jmess abdynpro1133
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s ( ABAP Runtime Error )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm BASIS
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00 671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00 671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Regards,
ShivaHi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS R68 Perform rollback
BASIS R49 Communication error, CPIC return code 017, SAP return code 223
BASIS R64 > CPI-C function: CMINIT(SAP)
*BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm 1
Time Ty. Nr Cl. User Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S Operation Trace
Development class... SBTC
Sm63
Start/end time Name of the active operation mode
00.00 - 01.00 Normal
01.00 - 02.00 Normal
02.00 - 03.00 Normal
03.00 - 04.00 Normal
04.00 - 05.00 Normal
05.00 - 06.00 Normal
06.00 - 07.00 Normal
07.00 - 08.00 Normal
08.00 - 09.00 Normal
09.00 - 10.00 Normal
10.00 - 11.00 Normal
11.00 - 12.00 Normal
12.00 - 13.00 Normal
13.00 - 14.00 Normal
14.00 - 15.00 Normal
15.00 - 16.00 Normal
16.00 - 17.00 Normal
17.00 - 18.00 Normal
18.00 - 19.00 Normal
19.00 - 20.00 Normal
20.00 - 21.00 Normal
21.00 - 22.00 Normal
22.00 - 23.00 Normal
23.00 - 00.00 Normal
Regards, -
Transport control program tp ended with error code 0208
Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System NSP Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 12.10.2006 Function TMS_TP_SHOW_BUFFER
Time 07:13:13 Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, GeorgeHi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps. -
Transport control program tp ended with error code 0232
Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
DellaI've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc ,00000] >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc ,00000] Client NLS setting (OCINlsGetInf -
Transport control program tp ended with error code 0016
Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
| Transport control program tp ended with error code 0016
| Error exporting request HRPKT00005 00:59:50
| Program ended with error or warning, return code: F
| Runtime (seconds) : 13.876
| End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PMok thanks
-
Transport control program tp ended with error code 0203
when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen. -
Automatic imports throwing "tp ended with error code 0204"
Hello frnds !
In one of my non prod system, where automatic transport is enabled for 4 clients, we are getting tp error with 0204 error code in job jog of TMS_000000000*TMS_TP_IMPORT with report TMS_BCI_START_SERVICE.
Can you plz suggest someting ..
Release :
SAP_BASIS : 700 : SAPKB70013 : SAP Basis Component
Job log:
Job log overview for job: TMS_0000000005TMS_TP_IMPORT / 18003700
Job started
Step 001 started (program TMS_BCI_START_SERVICE, variant , user ID **)
Transport control program tp ended with error code 0204
Transport control program tp ended with error code 0204
Job finished
STMS errors :
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
Transport control program tp ended with error c
Errors: parameter is missing
System E40 Command Start TMS_TP_IMPORT
Client 000 Service Transport Service
User HP Start Hintergrund
Date 24.06.2009 Function TMS_TP_IMPORT
Time 18:00:58 Message TP_REPORTED_ERROR
************************************************************************************************************************Transport control program tp ended with error c
Errors: parameter is missing
This is tp version 372.04.40 (release 700)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056). My name: pid 18030 on er3asu72
(e40adm)
HALT 20090624180058
ERROR: Empty client(s) found in buffer E40. These entries cannot be filled implicitely.
Either use one of the options 'CLIENT' or 'DEFAULTCLIENT' or#use the command 'FILLCLIENT' to fill these entries with a valid client.
ERROR: EXIT(16) -> process ID is: 18030
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0204
standard output from tp and from tools called by tp:
************************************************************************************************************************Thanks
AshishHi Vikas,
Could you please check the SLOG file and see what you observe
/usr/sap/trans_P40/tmp/SLOG0926.E40.LOC is already in use (1), I'm waiting 2 sec (20090624180056).
Please check the following Note 12746 - WARN <file> is already in use (), I'm waiting 5 sec.
Mostly you have to perform the following step mentioned in Note
"If there is only one tp process that writes the SLOG messages, stop this process and copy the generated file in tmp to the existing file in log on UNIX, for example, using cat /usr/sap/put/tmp/P<date>.<SID> >> /usr/sap/put/log/P<date>.<SID>Afterwards, you can delete the file in tmp and repeat the phase."
Before trying above you can also stop all tp process and then start the transport job again.
Thank You,
Praveen
Maybe you are looking for
-
Show all History is no longer showing since recent update
After a recent Firefox update my History disappeared when doing "Show all History". Have checked preferences. Settings seemed to have not changed. How do I fix?
-
Transfer Apple TV content to computer
I had a hard drive crash on my computer. Is it possible to transfer Apple TV contents back to computer? Thanks
-
Old iweb site into new iweb?
Recently had to redo my computer. My iweb site is out there on mobile me and I downloaded the folder. I can't figure out how to set it up so iweb will open this site so I can update it...
-
Lenovo s650 won't boot, USB doesn't work
I bought this phone and installed a root app. I may delete some system files with root app. Since that, the phone won't boot. I tried Smart Phone Flash Tool but the Firmware won't be updated as USB doesn't work. What can I do at this point? Please he
-
I just restored my ipod because it kept freezing and now it won't let me add music, i have tried syncing my ipod and i have tried dragging the music but it won't let me, what should i do?