Client export
hello experts,
when client exported from scc8 the request created with 1.89 gb in data folder but now client size is increase so i am exports client with filesplit option but it create more no of request with 2 gb in size what is the difference between normal exporting and exporting with filesplit request.
fillesplit=2000000000
thansk
Hi,
there are no diffenreces other then creating multiple files if it gets bigger than 2GB.
so, in your case, it looks like the source client has grown a lot since the last export.
Similar Messages
-
Short dump while client export
Hi,
I am trying to export a client from BI test system, I am getting the below message:
InfoProvider ZSEBCST02 has been changed in the meantime
Message no. UCM0142
Diagnosis
InfoProvider ZSEBCST02 is used in data basis QinetiQ Data Basis Management as the data target of data stream Totals Records. The InfoProvider has been changed since you last saved the data basis. Therefore, the definition of the data model of data basis QinetiQ Data Basis Management is now based on the state of the InfoProvider before it was last changed and may be obsolete.
System Response
The saved version of data basis QinetiQ Data Basis Management will remain active for now.
Procedure
Check the data model of data basis QinetiQ Data Basis Management as to whether adjustments need to be made to the changed definition of InfoProvider ZSEBCST02.
Save data basis QinetiQ Data Basis Management.
The client export process does not start and it throws a short dump:
Runtime Errors MESSAGE_TYPE_X
Date and Time 01.08.2008 11:05:02
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Program error(s)
Long text of error message:
Diagnosis
A program error occurred.
System Response
Processing terminated
Procedure
Please notify SAP.
Procedure for System Administration
Technical information about the message:
Message class....... "UGMD"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_UG_MD_STORAGE_CHAR_LOCAL===CP" or "CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N"
"IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SFRNDEVSAP09"
Network address...... "10.0.32.38"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SFRNDEVSAP09"
Database type..... "ORACLE"
Database name..... "BI1"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Feb 4 2008 00:38:16"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 146
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 67037440
Heap.... 0
Page.... 24576
MM Used. 58875536
MM Free. 3966304
User and Transaction
Client.............. 100
User................ "SUPERUSER"
Language key........ "E"
Transaction......... "SCC8 "
Transactions ID..... "44B15FDD2C31F115B69C00151736FC1B"
Program............. "CL_UG_MD_STORAGE_CHAR_LOCAL===CP"
Screen.............. "SAPMSCC1 0121"
Screen line......... 15
Information on where terminated
Termination occurred in the ABAP program "CL_UG_MD_STORAGE_CHAR_LOCAL===CP" -
in "IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL".
The main program was "SAPMSCC1 ".
In the source code you have the termination point in line 491
of the (Include) program "CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N".
Source Code Extract
Line
SourceCde
461
APPEND ls_idx_sel TO lt_idx_sel.
462
ENDIF.
463
464
ENDLOOP.
465
466
set initial combination
467
LOOP AT lt_idx_sel ASSIGNING <ls_idx_sel>.
468
READ TABLE <ls_idx_sel>-t_idx INTO ld_idx_sel INDEX 1.
469
READ TABLE lt_sel ASSIGNING <ls_sel> INDEX ld_idx_sel.
470
READ TABLE lt_key INTO ls_key
471
WITH TABLE KEY fieldname = <ls_sel>-fieldname.
472
ASSIGN COMPONENT <ls_sel>-fieldname
473
OF STRUCTURE <ls_data>
474
TO <data>.
475
<data> = <ls_sel>-low.
476
ENDLOOP.
477
478
lf_found = abap_true.
479
WHILE lf_found = abap_true.
480
481
create entry for current key selection combination
482
TRY.
483
cl_finb_tr_tabu_tabkey=>create_c(
484
EXPORTING i_tabname = ld_tabname
485
i_key = <ls_data>
486
i_keyfields_filled = ld_keyfields_filled
487
i_keymode = ld_keymode
488
IMPORTING e_tabkey = ls_transport-tabkey ).
489
CATCH cx_root .
490
CATCH cx_finb_tr. "N875173
>>>>>
MESSAGE x000(ugmd). ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
492
CATCH cx_sy_dyn_call_error. "N875173
493
MESSAGE x000(ugmd). ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
494
ENDTRY.
495
496
INSERT ls_transport INTO TABLE et_transport.
497
498
proceed to next combination
499
CLEAR: lf_found,
500
ld_count.
501
502
WHILE lf_found IS INITIAL.
503
504
ADD 1 TO ld_count.
505
READ TABLE lt_idx_sel ASSIGNING <ls_idx_sel> INDEX ld_count.
506
IF sy-subrc IS NOT INITIAL.
507
EXIT.
508
ENDIF.
509
510
READ TABLE lt_key INTO ls_key
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
2
SY-DBCNT
2
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
121_C
SY-UCOMM
DBAC
SY-TITLE
Client Export
SY-MSGTY
X
SY-MSGID
UGMD
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
1
SY-DATUM
20080801
SY-UZEIT
110457
SY-XPROG
SAPLSYST
SY-XFORM
SYSTEM_HOOK_OPEN_DATASET
Active Calls/Events
No. Ty. Program Include Line
Name
14 METHOD CL_UG_MD_STORAGE_CHAR_LOCAL===CP CL_UG_MD_STORAGE_CHAR_LOCAL===CM00N 491
CL_UG_MD_STORAGE_CHAR_LOCAL=>IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL
13 METHOD CL_UG_MD_DISPATCHER_CHAR======CP CL_UG_MD_DISPATCHER_CHAR======CM00J 6
CL_UG_MD_DISPATCHER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
12 METHOD CL_UG_MD_BUFFER_CHAR==========CP CL_UG_MD_BUFFER_CHAR==========CM00F 3
CL_UG_MD_BUFFER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
11 METHOD CL_UG_MD_CHAR=================CP CL_UG_MD_CHAR=================CM01M 59
CL_UG_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
10 METHOD CL_UC_MD_CHAR=================CP CL_UC_MD_CHAR=================CM00J 53
CL_UC_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
9 METHOD CL_UG_MD_TR_CLIENTCOPY========CP CL_UG_MD_TR_CLIENTCOPY========CM006 84
CL_UG_MD_TR_CLIENTCOPY=>COLLECT_FIELDNAME_CONTENT
8 METHOD CL_UG_MD_TR_CLIENTCOPY========CP CL_UG_MD_TR_CLIENTCOPY========CM001 41
CL_UG_MD_TR_CLIENTCOPY=>IF_FINB_TR_METHOD_CLIENTCOPY~CC_COLLECT_OBJECTS
7 METHOD CL_FINB_TR_OBJECT_BASE========CP CL_FINB_TR_OBJECT_BASE========CM00M 17
CL_FINB_TR_OBJECT_BASE=>IF_FINB_TR_OBJECT_CC~CC_COLLECT_OBJECTS
6 FUNCTION SAPLFINB_TR_CC LFINB_TR_CCU02 83
FINB_TR_CC_EXIT_ANALYZE
5 FORM SAPLFINB_TR_CC LFINB_TR_CCF01 688
CC_ANALYZE_CLIENT_LOCAL
4 FUNCTION SAPLFINB_TR_CC LFINB_TR_CCU01 196
FINB_TR_CC_EXIT
3 FORM SAPLSCCR LSCCRF2K 293
RUN_EXITS
2 FUNCTION SAPLSCCR LSCCRU06 1087
SCCR_PERFORM_CLIENT_COPY
1 MODULE (PAI) SAPMSCC1 MSCC1I03 482
CHECK_MODE
Chosen variables
Name
Val.
No. 14 Ty. METHOD
Name CL_UG_MD_STORAGE_CHAR_LOCAL=>IF_UG_MD_STORAGE_CHAR~TRANSPORT_BY_SEL
IT_SEL
Table[initial]
IF_COMPLETE
2
0
0
0
IF_USE_MASK
X
5
8
0
0
IF_TEXT_ONLY
2
0
0
0
ET_TRANSPORT
Table[initial]
ET_TRANSPORT_SEL
Table[initial]
LD_TABNAME
T100A
533342222222222222222222222222
410010000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
<LS_DATA>
00000000000000
2222222222222222222222222222222222222222222222222333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LD_KEYFIELDS_FILLED
01
33
01
00
00
LD_KEYMODE
G
4
7
0
0
LS_TRANSPORT-TABKEY
00000000000000
2222222222222222222222222222222222222222222222222333333333333332222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
0
0
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-REPID
CL_UG_MD_STORAGE_CHAR_LOCAL===CP
4455454455545444544455444443334522222222
3CF57FD4F34F2175F3812FCF31CDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-MSGID
UGMD
54442222222222222222
57D40000000000000000
00000000000000000000
00000000000000000000
SPACE
2
0
0
0
SY-MSGNO
000
333
000
000
000
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 13 Ty. METHOD
Name CL_UG_MD_DISPATCHER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
IT_SEL
Table[initial]
IF_COMPLETE
2
0
0
0
IF_USE_MASK
X
5
8
0
0
IF_TEXT_ONLY
2
0
0
0
ET_TRANSPORT
Table[initial]
ET_TRANSPORT_SEL
Table[initial]
%_SPACE
2
0
0
0
SY-REPID
CL_UG_MD_DISPATCHER_CHAR======CP
4455454454455454445544453333334522222222
3CF57FD4F4930143852F3812DDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
|
| 3000C000 |
| E0001C00 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->DO_LOCAL |
|
3000C000
F0000C00
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 12 Ty. METHOD
Name CL_UG_MD_BUFFER_CHAR=>IF_UG_MD_CHAR_INTERNAL~TRANSPORT_BY_SEL
IT_SEL
Table[initial]
IF_COMPLETE
2
0
0
0
IF_USE_MASK
X
5
8
0
0
IF_TEXT_ONLY
2
0
0
0
ET_TRANSPORT
Table[initial]
ET_TRANSPORT_SEL
Table[initial]
%_SPACE
2
0
0
0
SY-REPID
CL_UG_MD_BUFFER_CHAR==========CP
4455454454544455444533333333334522222222
3CF57FD4F256652F3812DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SCREEN
%_AUTOTEXT003
2545545455333222222222222222222222222222222222222222222222222222222222222222222222222222222222
5F154F4584003000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 11 Ty. METHOD
Name CL_UG_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
IT_SEL
Table[initial]
IF_COMPLETE
2
0
0
0
IF_USE_MASK
X
5
8
0
0
IF_TEXT_ONLY
2
0
0
0
ET_TRANSPORT
Table IT_111628[0x404]
CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_TRANSPORT
Table reference: 13198
TABH+ 0(20) = 007B9174FE07000000E9F174FE07000000000000
TABH+ 20(20) = 8E3300000CB401000000000094010000FFFFFFFF
TABH+ 40(16) = 04E801000017000010000000A2278001
store = 0x007B9174FE070000
ext1 = 0x00E9F174FE070000
shmId = 0 (0x00000000)
id = 13198 (0x8E330000)
label = 111628 (0x0CB40100)
fill = 0 (0x00000000)
leng = 404 (0x94010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000108
occu = 16 (0x10000000)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0FBAD74FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 48249 (0x79BC0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ET_TRANSPORT_SEL
Table IT_126753[0x176]
CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_TRANSPORT_SEL
Table reference: 118
TABH+ 0(20) = B0315375FE070000C0294E75FE07000000000000
TABH+ 20(20) = 7600000021EF010000000000B0000000FFFFFFFF
TABH+ 40(16) = 04800400801B000010000000C1248001
store = 0xB0315375FE070000
ext1 = 0xC0294E75FE070000
shmId = 0 (0x00000000)
id = 118 (0x76000000)
label = 126753 (0x21EF0100)
fill = 0 (0x00000000)
leng = 176 (0xB0000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000132
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x60320F75FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 53553 (0x31D10000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
%_DUMMY$$
2222
0000
0000
0000
<LS_SEL>
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME->DT_RFIELDNAME
Table IT_126975[2x60]
DATA=DT_RFIELDNAME |
| Table reference: 5220 |
| TABH+ 0(20) = 309A0C75FE070000000000000000000000000000 |
| TABH+ 20(20) = 64140000FFEF0100020000003C000000FFFFFFFF |
| TABH+ 40(16) = 04E80100300B0000100000002A278001 |
| store = 0x309A0C75FE070000 |
| ext1 = 0x0000000000000000 |
| shmId = 0 (0x00000000) |
| id = 5220 (0x64140000) |
| label = 126975 (0xFFEF0100) |
| fill = 2 (0x02000000) |
| leng = 60 (0x3C000000) |
| loop = -1 (0xFFFFFFFF) |
| xtyp = TYPE#000045 |
| occu = 16 (0x10000000) |
| access = 2 (ItAccessSorted) |
| idxKind = 1 (ItIndexLinear) |
| uniKind = 1 (ItUnique) |
| keyKind = 2 (table_line) |
| cmpMode = 3 (cmpSingleMcmpU) |
| occu0 = 1 |
| groupCntl = 0 |
| rfc = 0 |
| unShareable = 0 |
| mightBeShared = 0 |
| sharedWithShmTab = 0 |
| isShmLockId = 0 |
| gcKind = 0 |
| isUsed = 1 |
| isCtfyAble = 1 |
| >>>>> Shareable Table Header Data <<<<< |
| tabi = 0x6015FD74FE070000 |
| pgHook = 0x0000000000000000 |
| idxPtr = 0xA01BFD74FE070000 |
| shmTabhSet = 0x0000000000000000 |
| id = 53632 (0x80D10000) |
| refCount = 0 (0x00000000) |
| tstRefCount = 0 (0x00000000) |
| lineAdmin = 16 (0x10000000) |
| lineAlloc = 16 (0x10000000) |
| shmVersId = 0 (0x00000000) |
| shmRefCount = 1 (0x01000000) |
| >>>>> 1st level extension part <<<<< |
| regHook = Not allocated |
| collHook = Not allocated |
| ext2 = Not allocated |
| >>>>> 2nd level extension part <<<<< |
| tabhBack = Not allocated |
| delta_head = Not allocated |
| pb_func = Not allocated |
| pb_handle = Not allocated |
| <LS_SEL>-FIELDNAME |
| ??? |
| ?????? |
| ?????? |
| SY-SUBRC |
| 0 |
| 0000 |
| 0000 |
| LT_SEL |
| Table[initial] |
| LT_TRANSPORT |
| Table[initial] |
| LT_TRANSPORT_SEL |
| Table[initial] |
| %_SPACE |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| ME |
|
3000C000
70008C00
ME->DO_GUID_FIELD
|
| F0000000 |
| F0000000 |
| ME->DT_FDEP_INT |
| Table IT_126944[1x124] |
| DATA=DT_FDEP_INT
Table reference: 215
TABH+ 0(20) = B0753A2EFF07000090203775FE07000000000000
TABH+ 20(20) = D7000000E0EF0100010000007C000000FFFFFFFF
TABH+ 40(16) = 04B701005009000001000000A2078C01
store = 0xB0753A2EFF070000
ext1 = 0x90203775FE070000
shmId = 0 (0x00000000)
id = 215 (0xD7000000)
label = 126944 (0xE0EF0100)
fill = 1 (0x01000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000035
occu = 1 (0x01000000)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 1
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x10753A2EFF070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 27288 (0x986A0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x01000000)
lineAlloc = 1 (0x01000000)
shmVersId = 1380 (0x64050000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0043E873FE070000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
<LS_FDEP>
No. 10 Ty. METHOD
Name CL_UC_MD_CHAR=>IF_UG_MD_MANUAL_TRANSPORT~TRANSPORT_BY_SEL
IT_SEL
Table[initial]
IF_COMPLETE
2
0
0
0
IF_USE_MASK
X
5
8
0
0
IF_TEXT_ONLY
2
0
0
0
ET_TRANSPORT
Table IT_111628[0x404]
ET_TRANSPORT_SEL
Table IT_126753[0x176]
%_SPACE
2
0
0
0
SY-REPID
CL_UC_MD_CHAR=================CP
4455454454445333333333333333334522222222
3CF53FD4F3812DDDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
|
| 3000C000 |
| 70008C00 |
| SYST |
| ################################################ð#################################x#####XC#### |
| 000000000000000000000000000000000000002000000000F000000000000000000000000000109000700000540000 |
| 1010202000000000000020001000100000000080000000000000000000000000000000000000B00000800000830500 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 000000000000000000000000000000000000008000000000000000000000000000000000000000000000000000000C |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| No. 9 Ty. METHOD |
| Name CL_UG_MD_TR_CLIENTCOPY=>COLLECT_FIELDNAME_CONTENT |
| IO_MSG |
|
A0005000
F0000B00
CT_OBJECT
Table IT_43581[133x8]
FUNCTION=FINB_TR_CC_EXIT_ANALYZEDATA=LT_TMP_OBJECTS
Table reference: 3715
TABH+ 0(20) = 70438B74FE070000000000000000000000000000
TABH+ 20(20) = 830E00003DAA00008500000008000000FFFFFFFF
TABH+ 40(16) = 04720100D00400001B000000C1288001
store = 0x70438B74FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 3715 (0x830E0000)
label = 43581 (0x3DAA0000)
fill = 133 (0x85000000)
leng = 8 (0x08000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000011
occu = 27 (0x1B000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 4 (cmpSingleEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0548C74FE070000
pgHook = 0x3066DB74FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 24950 (0x76610000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1105 (0x51040000)
lineAlloc = 1105 (0x51040000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_UG_MD_TR_CLIENTCOPY========CP
4455454455554444454455333333334522222222
3CF57FD4F42F3C95E43F09DDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LT_FATTR
Table IT_122877[1x294]
CLASS=CL_UG_MD_TR_CLIENTCOPYMETHOD=COLLECT_FIELDNAME_CONTENTDATA=LT_FATTR
Table reference: 4265
TABH+ 0(20) = F0151175FE070000000000000000000000000000
TABH+ 20(20) = A9100000FDDF01000100000026010000FFFFFFFF
TABH+ 40(16) = 04E80100200C00000A000000A4058401
store = 0xF0151175FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id"InfoProvider ZSEBCST02 has been changed in the meantime"
1. Lock all users.
2. Put all jobs on hold.
3. Make sure that your upstream system (R/3, etc.) are not pushing data into BI.
4. Cycle the BI system.
5. Retry. -
Error in Client export/import
Dear all
i have test system i would like to perform client export/import in single system correct if made a mistake
i have export client which create 3 request namely SIDKOxxxxxx , SIDKTxxxxxx,SIDKXxxxxx .i had selected target SID as system same sid bcaz i have only one system
then i login again with scc4 create new client and login in that sap* and pass then when i run command stms_import to import all three transport into that client as said my message server gets disconnected correct me i am wrong
or i have to directely run scc7 bcaz the request already in /usr/sap/trans then these error won't occur i have the back up of database
now i am getting error oracle disconnected
RegrardsDear Pavan
I tried last night as you said i made new client as 300 in ides and copy user profile to that
when i tried to configure stms by setting CTC =1 when i configure transport routes i don't find any client number
to provide source and target client
kindly send some screen shots if u have that would great support
.Delete the existing TMS configuration.
2.In 000 client by using the user ddic create TMS configuration using STMS.
3.Click on the system, in transport tool tab add a parameter CTC and set it to 1.
4.Now configure the transport routes, there you can find the client number in consolidation routes.
5.Provide your source and destination client and create routes.
Regards -
Error in Client Export - TP program failed at OS
Hi,
I was trying the client export/import and export went succesfully.
Copied the cofile and data files into respective folder, Transport request added to buffer successfully but while importing TR using TP at OS the system shows following error:
Reason for error: TP_FAILURE
Return code: 0012
Error message: A tool used by tp aborted
and the log says
sap_dext called with msgnr "900":
SQL error "2289" during "" access: "ORA-02289: sequence does not exist"
IMPORT OF COMMANDFILE ONLY
end date and time : "20090716122953"
exit code : "12"
Please guide me,
Thanks in advanceHi,
This problem relates to Oracle Log Sequence. Please follow the below steps:
Log on to the OS using <SIDADM> login.
Execute the command :
C:> SQLPLUS "/as sysdba"
At SQL prompt execute the following statements:
truncate table schema.ddlog;
create sequence ddlog_seq minvalue -2147483640 maxvalue 2147483640 increment by 1 cache 50 noorder nocycle;
(Here schema will be SAP<SID>)
Try client import after this.
Hope this will help.
Thanks
LK
Edited by: Lokendra on Jul 17, 2009 6:31 PM -
Client export for ABAP programs, repository objects cross client objects
Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank youYou can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael -
Problem in client export and import (SCC8)
Hi,
I was asked to copy client 300 data on one AIX server to client 210 on another AIX server.
I have done the client export thru SCC8,
transferred those files to other server thru ftp,
added those requests to the import queue on target server.
As and when the request is added to the import queue, the status is being shown in red. Is there a problem with this.
And when i imported the request it got cancelled and the message in log says
the data file is damaged,but the other request(HPRKX00006) is still running.
It has taken a lot of time,so we deleted the data and cofiles related to the requests
and retransported them from source machine.
Even after that the status of the request is shown in red when added to the import queue, and dosent allow to import because the subsequent request is still running
and gives an error saying the request HPRKX00006 is still running.
Suggest a suitable solution.
pradeep.Hi,
Is your problem solved. Currently I am facing the same issue.
Please let me know what have you done if the issue is resolved.
Regards
Sharath -
Client export SCC8 - ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanHi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan -
Client Export ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanIn Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil -
Client Copy error during client export / RX file is not getting
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Client Copy error during client export / RX file is not getting generated
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Hi,
I am having one doubt regarding Client export and import
In my organization we are having three system landscape, but the Quality and Production server(In Process)
Development box is ready to use, and we are having another sand server in different location for our consultant practice
that system is not in our landscape and that is different location,i want to import that client in to my development server hear
It is possible to export that data from that Client(scc8) copy that in my development server and Import(scc7) is possible..?
if possible than what are the pre-requisites to do That Export and Import of client between two different systems,
what is best procedure to do this Task.......!
Regards'
Mohammed.Khan>>once export is done successfully than can i copy those exported file in to my file server and then copy to my development >>system trans directory (cofiile,datafile) than can i import those files in my development server with *stms_import* command
Yes, you have to
>>than can i go for client import(scc7)
Yes.
>>***Configuring the TMS between that sand box and my development server***
Not required but yes if the sandbox server is not in the landscape you have to create a Virtual System in sandbox and you have to configure the Transport, then only you would be able to create the export file
Regards
Subhash -
Re Run Client Export Transport Request
Dear Experts,
I was trying to do system refresh of Production data to quality. While executing the transport request in quality (STMS_IMPORT) quality server abruptly stopped. Now after starting the server I am checking the status of the "Client Export - Specific Object" Transport. It shows "Import Running". In import monitor the execution start is showing yesterdays date and status as running.
How can I rerun the TR
Ranjit SimonHi Ranjit,
You can check the import monitor and see if you can cancel the import request.
Once this is done, check TRJOB and TRBAT tables.
On OS level, if you can see abandoned tp processes, you can kill that.
Regards -
Client Export -- Parellel Processing....
When I went to SCC8 (Client Export), I saw an option called parellel processing (Any way it was disabled). May I know whether there is a chance for enabling parellel processing in Client Export?
Hi Shyam,
For parallel processing you need to enable the RFC Parallel processing, this can be done by selecting an RFC group and the number of processes.
Go to -> Parallel processes menu option.
As SCC8 tcode is for client transport it creates a transport request which then is exported by tp/R3trans transport programs.The settings for the parallel processes of the client copy do not affect this process.
For tcode SCC9 parallel processing works fine.
Rakesh -
Client copy using Client Export... Failed .. Need ur advice
Hi guiys how ru all doin...
I hope some one can help me oout in this issue.iam working on sap
4.6c, windows 2003 server, oracle9.2.0.
we need to take client copy from production client 300 to dev
server using client export method so I have performed client
copy using client export.these are the list of steps which i
performed but still am facing an error.
Checklists /prerequisites before doing client export :
Source client i.e. Client 300 should be locked for all users
except Administrator.
Ensure that NO Users are logged in both NCCSAPPRD and NCCSAPDEV
Server.
Inform Downtime to Users.
At least 2 background work process should be there.
Take Offline Backup of both Production server & Development
server.
Following Jobs rescheduled for next day for Client Export
Process:
1)Collector_for_performance_monitor
2)Customer_evaluati on_information
3)Error reporting
4)Eu_out
5)Vendor_evaluation_information
6)Leave_en titlement
Remove scheduled job from DB:
1)Check opt
2)Analyze tab
Lock all users except administrator
Change database mode from Archive to Non-Archive mode
Logon in NCCSAPPRD in Client 300 the one which is to be Exported
1.Enter Transaction SCC8
2.Select the copy profile and target system NCCSAPDEV Server and
other fields as necessary.
3.Click on "Execute in Background" button.
4.Click on the "Schedule job" button.
5.Verify that all information is correct and click on YES
button.
6.Click on continue at the "Info Client Export" window.
7.Specify the start time and click on SAVE.
8.Specify an output device at the "Background print parameters"
window and click on SAVE.
9.Click on OK at the information window.
Monitor the Client copy using transaction SCC3.
when am going to transaction scc3 in that ->All transport
requests ->Exports -> in that my source client 300 is there when
am double clicking it its showing me list of how many times
client export has been performed in that my date is also there
when iam double clicking it and going to details tab this is wat
the error which its giving....
Log file:
nccsapprd\sapmnt\trans\log\NCPET00968.NCP
Preparation for export
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
Execution of the export pre-processing methods for request
NCPKT00968
Start:Sorting and compressing the object list
End:Sorting and compressing the object list
Start:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Check for existence of inactive objects
End:Creating project information
Start:Writing nametab information for key entries
End:Writing nametab information for key entries
Start:Version creation of the objects of the request NCPKT00968
End:Version creation of the objects of the request NCPKT00968
Start:Adjusting the object directory for the objects of the
request NCPKT00968
End:Adapting the object directory for the objects of the request
NCPKT00968
Preparation for export
End date and time : 200708104758
Ended with return code: ===> 0 <===
Mainexport
Transport request___: NCPKT00968
System______________: NCP
tp path : tp
Version and Release: 305..15 46D
SQL error 1652 accessing GLFUNCA: ORA-01652: unable to extend
temp segment by 128 in
SQL error 1652 accessing PPOIX: ORA-01652: unable to extend temp
segment by 128 in
Incorrect export. Request is not imported.
Main export
End date and time : 20070810152923
Ended with return code: ===> 12 <===
This is the error which am getting in the transport log.
I tried to perform 4 times client copy. the first 2 times i got
the same error and the next 2 times it ended with return code
===> 4 <===.
Plzz anyone help me out in this issue as i need to perform it
again and this time i hope with ur help it should be
successful.
Waiting for ur replies
Best regardsThe problem you have is, that your TEMP tablespace is too small on the target system, you need to increase it.
Check Note 3155 - Termination due to tablespace overflow
Markus -
Hi Guys,
While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem
Regards
GaneshHello Ganesh,
I had received the same kind of error once, we applied the following workaround
Execute the client export in foreground. The client export at SAP level won't take much time and would get completed quickly.
BUT yes, this does NOT mean that the Co-files & Datafiles are generated quickly.
You will notice, that the file size & timestamp of cofile & datafile being updated. Once the timestap of the co-files & datafile stops you can be sure that the client export has completed.
Incase you still want to find the RCA of your problem, please send us the export log details.
Regards,
Ammey Kesarkar -
Client Export and Import (Speacially Import Procedures)
Dear All,
I have requirement to copy my production client's all data to Quality System's client.
What procedure should I follow?
If I am going to export and Import. I am not getting followings's Steps 2.3 to 2.6.
1. Client Export:
1.1 Run SCC8
1.2. Select Profile for desired copy type (Usually All SAP_ALL or user master only SAP_USER. You will need direction from
the requester as to the correct selection here. Use Profile -> Display Profile to display profile details.)
1.3. Select target System (or group)
1.4. De- Select u201CTest Runu201D (If selected)
1.5. Run Export
- Up to 3 requests are created, depending on the data selected and available:
I. u201CSIDKO00353u2033 for transporting client-independent data, if you have selected this
II. u201CSIDKT00353u2033 for transporting client-specific data
III. u201CSIDKX00353u2033 for transporting client-specific texts, provided texts are available in this client
1.6.Monitor TP logs for errors and export files for growth
2. Client Import:
2.1. Create client (scc4)
2.2. Login to client (sap* u2013 pass)
2.3. Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer
2.4. Highlight #1 and use u201CRequest -> Importu201D to launch import tool
2.5. Monitor u201CIu201D file in OS u201C/usr/sap/trans/tmpu201D dir for progress info
2.6. After Import is complete perform u201Cpost processing stepsu201D from client tool (SCC7) So if you have 3 transport requests and the data has been exported successfully then go for an import in quality system
Please let me know how will I Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer, Highlight #1 and use u201CRequest -> Importu201D to launch import tool, Monitor u201CIu201D file in OS u201C/usr/sap/trans/tmpu201D dir for progress info and After Import is complete perform u201Cpost processing stepsu201D from client tool (SCC7) .
Thanks for sharing knowledge.
With Warm Regards
DharmendraOnce u login to new client,
to Manually add u201COu201D transport then u201CXu201D then u201CTu201D to TMS buffer
go to STMS----> select the system
At top menu select
Extras --> Other Requests --> Add(here give the above created transport requests, 1 @ each time)
once u add those 3 trasnport requests u need to import them.
Highlight #1 and use u201CRequest -> Importu201D
for that from top menu select Request -> Import(Ctrl + F11)
coming to SCC7. its a tcode. execute the tcode and see.
Regards,
Ravi
Maybe you are looking for
-
Error while accessing Xcelsius report via LiveOffice
Hi all, We are getting error "Persisted view cannot be loaded u2013 LO 26620" when users try to run Xcelsius dashboard having some 5-6 BEX queries in it. The crystal reports(base for dashboards) get hanged for long and sometimes throw the error "Requ
-
External iSight not working on iMac, works on Macbook despite same software
Hello! I have an External iSight that when I plug into my Macbook (running latest Mac OS) works just fine with iChat AND Adobe Flash Webchats... However, when I plug it into my new iMac, the green light will turn on, but the it doesn't show on ANY ap
-
Good day All Since 3 weeks ago, I found something new with my iphone. First, I had to plug, unplug and plug the lightning cable into the phone to make it charging. Somedays after, I tryed to plug it a thousand time but nothing happens. When battery w
-
List of the datasources (ECC 6)
Hi, I just would get the list of all the datasources from the Business content (for ECC 6). I would put them in an Excel sheet (technical name + description). Is there a table in SE16 with all the datasources? Or does it exist a documentation with di
-
Hi All, I have a scenario idoc to file but the catch is 2 file need to send one with idoc details and the other one just a constant to be sent. for this I hope we need to BPM using fork. My question is can we avoid BPM and would it possible in re