Client for Second Life and/or Voice chat ?

Is there a client for Second Life and/or Voice chat ?

Yes, the app is called Pocket Metaverse. There is a free version and a Pro Version that costs $2.99.

Similar Messages

Script to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks

Hi, I am trying to find a way of using a batch file or vbscript to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks on a Network Interface Controller.
I've done some searching on the internet and I can see some suggestions to locate the Setting ID of the NIC and then remove the value from the "Bind" string under "HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Linkage" and "HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Linkage"
I tried this but it didn't seem to uncheck itself from the NIC properties under NCPA.cpl
Can someone help me?

http://social.msdn.microsoft.com/Forums/vstudio/en-US/b0407073-07bc-462b-9de9-7295be5fa183/disable-file-and-printer-sharing-for-mircorosoft-networks?forum=csharpgeneral
¯\_(ツ)_/¯

Second Life and the Macbook Pro

I got my macbook pro in September and I am now trying to run second life. While it does run, the frame rate is awful. Its not as if the graphics (even when turned up to the highest setting) should be taxing the graphics card.
Anyone else having problems with this.
thanks in advance
David

Hi there,
I'm running SL in a nearly full screen window on my MacBook Pro 17 and I find the fans ramp up almost immediately after I log in. SL runs pretty slow for me compared to my MacPro tower unit. I believe the graphics IS getting taxed considerably when in-world.
Do your frame rates improve when you reduce the size of the viewer window? If so.. I suspect video running outta steam..
In addition, I too have experienced the hard shutdown issue described by Crystal above when using my MacPro tower, even with 512MB video card. It happened literally dozens of times before I figured out that the graphics card was covered with dust and overheating while zooming a fast car around the Mooz racetrack, for example. Blew that bad boy off and no more screwy vid issues and best of all.. no hard lockups since.
This notebook has 256MB of video ram.. I really notice the difference between the two computers.
As an aside.. I have run SL on a Dual 1.25Ghz G4 thats got a 128MB video card in it. SL is miserable on that machine. It's much better if I run SL in a squinchy little window, but even then its a newbie bumping into stuff and extended times waiting for grey things to rezz..
Don't get me started about the spinning beachball......
If you use the windlight viewer these afore mentioned problems are amplified in my opinion. I think ya gotta have cubic video ram to be a happy camper on SL, no pun intended.
Hope this sheds some light..
Cheers, Malcolm
PS: Looking for an SL 'Think Different' T-shirt.. I can be found at Mooz often..

Using the same client for both regfree and out-of-proc COM

Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
Nick

Try Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik

ITS 6.2 on Netweaver 04 for ESS Life and events

Hi
ERP 2004 webdynpro bus package does not support the life and events for ESS. So I got to use teh ITS version for this one. I see that none of the ITS services PZML_01, PZML_02 are published to ITS. Also the recommended version is a standalone ITS 6.2. Have anyone successfully able to run life and events ITS iviews by doing like this against a ECC5? How did you publish the ITS services? Did you guysinstalled another standalone ITS 6.2 in addition to the integrated ITS 6.4? Please help
Ashish

Anyone?

Thin clients for both Tarantella and Citrix

What thin clients out there (hardware) supports Tarantella over the
internet?
Currently many of the users in my organization have a laptop at home and a
thin client at work. The laptop could be removed now, after having
installed Tarantella.
Wyse doesn't seem to support both Tarantella and Citrix - who does?
Any pointers welcome. Thanks in advance.
Jakob Breivik Grimstveit, http://www.grimstveit.no/jakob, +47 48298152

Jakob Breivik Grimstveit wrote:
What thin clients out there (hardware) supports Tarantella over the
internet?
Currently many of the users in my organization have a laptop at home and a
thin client at work. The laptop could be removed now, after having
installed Tarantella.
Wyse doesn't seem to support both Tarantella and Citrix - who does?
Any pointers welcome. Thanks in advance.
We do have a Tarantella client for Tarantella
http://www.tarantella.com/download/clients/#EEwince

Client for the mac, and more

hi all i am willing to write code, and create a tool that runs on the same server as the cal. this code would get the data and convert it to ical format, which would then sync up with all the clients out there.
the company i work for is interested in getting sun cal server for about 7000 users, but we cant do that unless there is a client that will talk to it directly, outlook is not an option.
if any of you know of a client out there, (with the exceptiopn of glow) please let me know. i will try to help that project out, or perhaps just create that ical script that runs every time i log in via my ical client......
ideas ????

I am currently using this to subscribe to my server calendar.
http://www.earlham.edu/~littejo/software/icald.shtml
It seems to work well for me but I think there is always room for improvement.
If you read the pod doc it lists some issues that exist between the two technologies. (WCAP vs iCal subscribe and publish)
I think it may be a good starting point for you.
You may want to review the following doc.
http://developer.apple.com/internet/appleapplications/icalendarfiles.html
I am willing to assist in any way I can.

HT1414 My 5s iphone after an update for itunes can now no longer be recognised? by the itunes site on my laptop?, The support page says my phone number is incorrect for phone support and the email chat line doesnt send my message. nightmare!

Whilst trying to find an answer from the apple support pages i'm finding lifes a misery. Itunes was sync before the update and all was well. How can i get my phone sync up properly again, Thanks Apple!

There are a lot of discussions about this on the iTunes forum.

This is **. I stayed up to order my kids new 6's. I have done nothing all night but get ECPD errors. I have been on hold for 40 min and no live chat is available. Nice job Verizon.

Seriously?

I went onto the apple store app, it at least let me reserve an iPhone and will send an email when apple can talk to Verizon to finalize the order. It's not a perfect solution but at least it's something that I have one reserved! Worked on the website for over an hour and because I get 25% off my calling plan through my company I kept getting an error.

Something On My Mac is Blocking WoW, Second life, and other such games

I can't figure it out. There's some program on my Mac that's blocking the game's ability to go online. I uninstalled Norton (with a full norton remover) and it has no processes running, my Mac firewall allows all connections...I just cant figure it out. Here's my list of processes. When I run VMWare Windows, the things work well, but being games, it works slowly. It has to be something Mac.
Active Memory: 815.78 MB
Free Memory: 900.50 MB
Wired Memory: 175.98 MB
Used Memory: 1.11 GB
Inactive Memory: 140.21 MB
Total VM: 60.50 GB
Number of processes: 86
ID Process Name User CPU RSIZE VSIZE
0 kernel_task root 4.7 85.58 MB 1.15 GB
1 launchd root 0.0 532.00 KB 586.73 MB
10 kextd root 0.0 1.15 MB 586.19 MB
11 DirectoryService root 0.0 3.02 MB 588.79 MB
12 notifyd root 0.0 464.00 KB 586.18 MB
13 syslogd root 0.0 1.32 MB 588.66 MB
14 configd root 0.0 1.88 MB 587.23 MB
15 distnoted daemon 0.6 740.00 KB 585.59 MB
16 mDNSResponder _mdnsrespo 0.0 1.18 MB 587.50 MB
18 launchd _mdnsrespo 0.0 448.00 KB 585.73 MB
20 securityd root 0.0 1.92 MB 587.37 MB
25 ntpd root 0.0 836.00 KB 586.12 MB
26 cron root 0.0 636.00 KB 586.69 MB
28 update root 0.0 284.00 KB 585.57 MB
29 SystemStarter root 0.0 676.00 KB 585.61 MB
33 RFBRegisterMDNS root 0.0 1.05 MB 586.62 MB
34 mds root 0.0 19.39 MB 722.31 MB
35 loginwindow ben 0.0 8.52 MB 894.75 MB
36 KernelEventAgent root 0.0 640.00 KB 585.68 MB
37 kdcmond root 0.0 1,020.00 KB 585.73 MB
39 hidd root 0.0 580.00 KB 585.59 MB
40 fseventsd root 0.0 1.27 MB 593.35 MB
41 dynamic_pager root 0.0 704.00 KB 585.61 MB
43 diskarbitrationd root 0.0 1.03 MB 585.69 MB
47 autofsd root 0.0 664.00 KB 585.62 MB
48 socketfilterfw root 0.0 1.48 MB 585.83 MB
52 coreservicesd root 0.0 23.77 MB 615.97 MB
54 blued root 0.0 2.00 MB 596.61 MB
72 vmnet-natd root 0.0 244.00 KB 586.14 MB
78 vmnet-dhcpd root 0.0 208.00 KB 585.93 MB
80 vmnet-netifup root 0.0 152.00 KB 586.64 MB
83 vmnet-netifup root 0.0 152.00 KB 586.64 MB
88 vmnet-dhcpd root 0.0 208.00 KB 585.93 MB
90 vmnet-bridge root 0.0 376.00 KB 586.70 MB
91 WindowServer _windowser 25.9 38.54 MB 957.45 MB
100 krb5kdc root 0.0 1.39 MB 586.05 MB
110 llipd root 0.0 220.00 KB 585.59 MB
112 qmasterd root 0.0 3.58 MB 592.13 MB
121 privoxy root 0.0 3.92 MB 670.04 MB
123 RetroRun root 0.0 2.84 MB 734.00 MB
124 qmasterd root 0.0 3.81 MB 592.20 MB
140 pvsnatd root 0.0 532.00 KB 588.22 MB
148 coreaudiod root 0.0 5.68 MB 594.61 MB
162 RetroRunSL root 0.0 6.00 MB 917.69 MB
165 mdworker nobody 0.0 2.88 MB 602.80 MB
166 mdworker ben 0.0 8.44 MB 643.22 MB
168 launchd ben 0.0 540.00 KB 585.73 MB
172 Folder Actions Dispatcher ben 0.0 3.08 MB 873.02 MB
175 ARDAgent ben 0.0 2.96 MB 905.40 MB
177 Spotlight ben 0.0 4.69 MB 880.55 MB
178 UserEventAgent ben 0.0 5.82 MB 607.57 MB
180 AppleVNCServer ben 0.0 2.15 MB 852.86 MB
181 pboard ben 0.0 580.00 KB 586.63 MB
182 ATSServer ben 0.0 5.64 MB 667.04 MB
183 VNCPrivilegeProx root 0.0 616.00 KB 586.61 MB
184 Dock ben 0.0 21.57 MB 952.62 MB
185 WDBMService root 0.0 116.00 KB 586.62 MB
190 SystemUIServer ben 0.0 12.12 MB 931.26 MB
191 Finder ben 0.0 10.70 MB 935.40 MB
210 iTunes ben 0.0 42.57 MB 985.90 MB
213 nmbd root 0.0 1.23 MB 586.94 MB
221 pplogger ben 0.0 3.95 MB 896.43 MB
222 pploader ben 0.0 7.69 MB 877.63 MB
223 iTunes Helper ben 0.0 2.32 MB 849.18 MB
224 Quıcĸsıɩⅴεʀ ben 0.0 22.96 MB 952.32 MB
225 Adium ben 0.0 24.68 MB 985.13 MB
227 YouControlTunesEngine ben 0.0 7.85 MB 916.68 MB
228 Speech Synthesis Server ben 0.0 2.95 MB 873.13 MB
231 iAlertU ben 0.0 12.39 MB 928.06 MB
232 EyeTV Helper ben 0.0 2.49 MB 849.26 MB
233 GrowlHelperApp ben 0.0 11.64 MB 924.62 MB
234 PlugSuit ben 0.0 3.39 MB 872.98 MB
235 Microsoft AU Daemon ben 0.0 2.28 MB 864.66 MB
236 MagicMenu ben 0.0 5.13 MB 915.96 MB
237 Mail ben 0.2 38.57 MB 1,015.48 MB
238 Spirited Away ben 0.0 4.77 MB 930.93 MB
239 EarthDesk Engine ben 2.8 78.87 MB 1.08 GB
240 Safari ben 1.2 139.97 MB 1.13 GB
243 usbmuxd nobody 0.0 684.00 KB 586.98 MB
253 MagicMenuHotKeyDaemon ben 0.0 2.49 MB 879.34 MB
263 SyncServer ben 0.0 5.18 MB 601.36 MB
274 launchd _securitya 0.0 448.00 KB 585.73 MB
365 AppleSpell.service ben 0.0 3.46 MB 601.71 MB
372 Activity Monitor ben 37.9 17.19 MB 988.68 MB
373 pmTool root 23.3 1.34 MB 595.68 MB
387 smbclient ben 0.0 1.18 MB 588.29 MB
Thanks!

Thank you for the reply. I did try change my DNS server didn't seem to help.
When you are on iTunes and click on Help Menu highlight Run Disgnositcs choose Network Connectivity Test do you get any red buttons?
Thanks for you help!!

USB Headsets & voice chat in Second Life

I am curious if anyone else has attempted to try out the voice chat in the Second Life (v1.16) preview. I know this is a beta version and it may be a matter of things simply not working yet.
First of all, here are my hardware settings:
• Power Macintosh G5 - 1.8 GHz, 160 GB HD (70 GB free), 2GB RAM
• Logitech 250 USB headset
I have had the headset connected to all of the USB ports on the front and back of the G5, both ports on the keyboard and through a powered USB 2.0 hub with no change in performance or results. The headset works in Skype and GarageBand with no problems.
Here's the issue...
When attempting to use voice chat in Second Life, I have only been able to successfully talk with other users on one occasion. Most other times, I either have no response from the mic, or no audio in the headphones.
This does not happen until I am running Second Life and attempt to enable voice chat, but the effect is system-wide once it happens.
I suspect it is a problem with the preview version of Second Life and or its voice system but I would appreciate any thoughts anybody might have.
Thanks!

Issue is more widespread than originally thought. Re-posting in proper venue with more specifics.

Voice Chat for Starcraft 2?

Anyone else having difficulties with their sound on a MBP release date 2011 and ingame voice chat in Starcraft 2?
If so, any solutions?
Thanks.

That's exactly what i am talking about. Your IP address is private. Means, it is not routable outside your organization. Means, that you cannot receive anything from outside, because technically this private address does not exist outside your network.
However, you might be able to send audio to someone outside who has public IP address (PLEASE, read up about private and public IPv4 addresses and NAT in order to understand what your problem is. Just one Wiki page that you can dig up in Google.com).
Now you simply cannot use your chat from inside your organization to chat with outside people. It will not work. You need public IP addresses in both ends (i.e. you and remote party) + firewall rules must allow UDP traffic for certain ports, that your program uses.
If you want to overcome private addressing problem manually, i dont know how to do it. But what i know for sure is that it would be painful. My application that i made uses a VoIP server (SIP server and an RTP proxy server). These servers do private address handling (NAT handling) for my audio/video streams.
You have an option though. Go to your network admin and lick his/her brain. Ask for a public IP address (they might have some in reserve). Do the same thing at the remote end.

Poor video and voice chat

hi im new here first time, i have a problem with skype and yahoo! when i use the cam and or voice chat in either of them the cam is very poor and voice chat fails , some days the the whole pc system grinds too a halt wont change page or log off. ive checked the speed and upload speed and it says its ok for good video andvoce chat?,,, download is 23ish and upload is 5ish my ip limit is 24 and 10. anyone have any ideas ive line checked and its quiet and everytime i have a problem ive checked speed .says its ok. many thanks in advance. o bt w its been like this since it was installed 1-2 months ago .

Hi
Have you checked Skype with another pc or Iphone etc?
With those speeds, skype should be fine.
i therefore wonder if the pc is the stumbling block?
John

Build and Capture task sequence fails at 'Prepare ConfigMgr Client for Capture' step

The scenario is as follows:
Task Sequence is a Build and Capture of Windows 7 SP1 x64 Enterprise
There are 17 Applications installed split into 2 'Install Application' steps due to the 9 item limit
129 Software Updates are installed
SCCM 2012 RTM
I have built and captured on this system previously however there were no 'applications', just traditional SCCM 'packages'
All task sequence steps run successfully until it gets to the 'Prepare ConfigMgr Client for Capture' step and it fails here. Here are the relevant parts of the SMSTS.log file:
<![LOG[No certificates to delete]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1013">
<![LOG[Deleting Client properties from file C:\Windows\SMSCFG.INI succeeded.]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:922">
<![LOG[Reseting the Trusted Root Key successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1088">
<![LOG[Deleting instance of 'CCM_Client' successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:170">
<![LOG[Successfully reset Registration status flag to "not registered"]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:309">
<![LOG[Successfully disabled provisioning mode.]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1273">
<![LOG[Start to cleanup TS policy]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2773">
<![LOG[getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,389)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient"
context="" type="0" thread="2880" file="wminamespace.cpp:389">
<![LOG[ns.Query(sQuery, &spEnum), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,2800)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2800">
<![LOG[Wmi query 'select * from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0xffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="utils.cpp:2800">
<![LOG[End TS policy cleanup]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2821">
<![LOG[TS::Utility::CleanupPolicyEx(false), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,457)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880"
file="preparesmsclient.cpp:457">
<![LOG[Failed to delete policies compiled by TaskSequence (0xffffffff)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:457">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:472">
<![LOG[pCmd->Execute(), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="main.cpp:136">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="main.cpp:136">
<![LOG[Process completed with exit code 4294967295]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="commandline.cpp:1098">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="instruction.cxx:3011">
<![LOG[Failed to run the action: Prepare ConfigMgr Client for Capture.
Unknown error (Error: FFFFFFFF; Source: Unknown)]LOG]!><time="15:35:21.046-660" date="11-13-2012" component="TSManager" context="" type="3" thread="2152" file="instruction.cxx:3102">
It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
I have also testing this using 'capture media' in the full OS and that also fails at the same step with the same errors in the smsts.log
The only workaround I have for now is to let the task sequence fail at the 'Prepare ConfigMgr Client for Capture' step, then I uninstall the SCCM client using 'ccmsetup.exe /uninstall' and use the 'capture media' method - obviously with no SCCM client installed,
it skips the 'Prepare ConfigMgr Client for Capture' step and goes straight to the 'Prepare OS' step and then to the actual capture to the WIM step.
Anybody else seeing this or have any suggestions?
My Microsoft Core Infrastructure & Systems Management blog -
blog.danovich.com.au

It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
You dont have to test it 18 times....
Just test with 50% of the applications first, if it fails, test with 25% and then on of the time...
You should be able to find the application, within 4-5 tests...
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
http://www.ronnipedersen.com/ and SCUG.dk/ | Twitter
@ronnipedersen

Highlights from the Second Life Destination Guide 7/17/2015

Still trying to get into Hair Fair 2015? Fret not — your good friends over at the Second Life Destination Guide have got your back. Stop by the Relay for Life of Second Life event this weekend and support a great cause! Find out more about their fundraising efforts and events at their website.
That’s not the only thing going on in Second Life right now — so here’s a handful of experiences you should get to when you next log in.
Relay For Life of Second Life
Relay For Life of Second Life's relay weekend runs from July 18th through the 19th. Come join the largest event in Second Life and raise money for cancer research. Full schedule at relayforlifeofsecondlife.org/event-day
Visit in Second Life
Kustom9
Explore the exclusive creations of 66 designers in the latest round of Kustom9, a recurring fashion/design event in Second Life.
Visit in Second Life
Wayward Carnival
You are invited to the the Wayward Carnival featuring over 50 of the most renown designers, builders, and creators in all of Second Life! The Wayward Carnival, held through July 30, spotlights all the designer exclusives as well as a working carnival!
Visit in Second Life
Tristan und Isolde
Giovanna Cerise was inspired by "Tristan and Isolde," the drama of love par excellence, to create this installation. A lunar atmosphere and romantic environment welcomes you to the soundtrack music of Richard Wagner.
Visit in Second Life
LICK
The McFly Project - Step into the past and explore the world that once was and find your way in to the future. Just be careful to watch your step along the way.
Visit in Second Life
Don’t forget to post your Second Life pics to the Official Second Life Flickr page.
There are just a few days left to enter our snapshot contest. You could win L$10,000 by snapping pics of your free SL12B commemorative avatar. Grab an avatar off the Marketplace for exactly L$0!
That’s it for this edition of Destination Guide Highlights. If you think your spot should be added to the Destination Guide, be sure to hit us up via the Destination Guide suggestion form.

Still trying to get into Hair Fair 2015? Fret not — your good friends over at the Second Life Destination Guide have got your back. Stop by the Relay for Life of Second Life event this weekend and support a great cause! Find out more about their fundraising efforts and events at their website.
That’s not the only thing going on in Second Life right now — so here’s a handful of experiences you should get to when you next log in.
Relay For Life of Second Life
Relay For Life of Second Life's relay weekend runs from July 18th through the 19th. Come join the largest event in Second Life and raise money for cancer research. Full schedule at relayforlifeofsecondlife.org/event-day
Visit in Second Life
Kustom9
Explore the exclusive creations of 66 designers in the latest round of Kustom9, a recurring fashion/design event in Second Life.
Visit in Second Life
Wayward Carnival
You are invited to the the Wayward Carnival featuring over 50 of the most renown designers, builders, and creators in all of Second Life! The Wayward Carnival, held through July 30, spotlights all the designer exclusives as well as a working carnival!
Visit in Second Life
Tristan und Isolde
Giovanna Cerise was inspired by "Tristan and Isolde," the drama of love par excellence, to create this installation. A lunar atmosphere and romantic environment welcomes you to the soundtrack music of Richard Wagner.
Visit in Second Life
LICK
The McFly Project - Step into the past and explore the world that once was and find your way in to the future. Just be careful to watch your step along the way.
Visit in Second Life
Don’t forget to post your Second Life pics to the Official Second Life Flickr page.
There are just a few days left to enter our snapshot contest. You could win L$10,000 by snapping pics of your free SL12B commemorative avatar. Grab an avatar off the Marketplace for exactly L$0!
That’s it for this edition of Destination Guide Highlights. If you think your spot should be added to the Destination Guide, be sure to hit us up via the Destination Guide suggestion form.

Client for Second Life and/or Voice chat ?

Similar Messages

Maybe you are looking for