Client from 800 to 000 client to activate the TAX Procedures..

Hi Guru's,
In my practice server i am not able to get the tax procedures TAXINN and TAXINJ for this i went to institute they said that copying from 000 client to 800 client..then we can get in 800 client also.. but here is the problem how to do it..
Please friends if any one know's please reply me...
Thanks & Regards
Sunil gupta.

Hi Sunil,
Please go through the link given below.
SAP Library - BC ? Client Copy and Transport (BC-CTS-CCO)
Hope this will help you.
Regards
Eugene

Similar Messages

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

Unable to install sccm client from SCCM console install client option

Hi
Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
is boundry of sccm .
Client push install in console is diabled
Regards Sushain KApoor

Hi!
Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
Best regards
Henrik

Is it possible to to disconnect 2 wireless clients from my wireless network without access to the clients i.e. 2 iPads?

Is it possible to disconnect 2 wireless clients from my network if I do not have access to the clients? ie 2 iPads.

You would have to set up Timed Access for each device.
This consists of specifying the amount of time each day that wireless devices will be allowed to connect to the network. You must provide a MAC or hardware address for each device, which is a long code that might look something like this, for example......A1-B2-C3-D4-E5-F6....and then specify the hours each day that this device is allowed to connect to the wireless network.
You have to do this for each device, which is tedious. Devices that are not on the Access List cannot connect to the network at any time.

How to copy Value of fright from pricing procedure to the tax procedure

Dear All,
Please note, I have a condition type in Pricing procedure i.e. ZRCO-this is for fright which will be added by the user in the PO.
I want to copy the same value to ZRC1 which is a condition type in tax procedure.
Kindly advise, is there any way we can do this automaticaly. My requirement is to add the fright to the gross price while caluclating the VAT in tax procedure.
Rgds,
Raghavendra N N

Hi,
There is a Field for Manual entries in configutration for Conditions : Condition Types.
Manual Entries Indicator which controls the priority within a condition type between a condition entered manually and a condition automatically determined by the system.
Make the following entries according to your requirements:
_: No limitations
A: Freely definable
B: The automatic entry has priority. If a condition record exists, the condition cannot be entered manually.
C: The manual entry has priority. When you enter the condition manually, the system does not check whether a condition record exists.
D: Cannot be processed manually
Hope this will help.

How to initiate a Lync call on mobile client from desktop?

Hi All,
I've go Lync 2013 enterprise voice setup and working lovely. Also have Lync mobile clients working great too.
I want to get rid of my desk phone, well, because it'd be cool and save the company money of course.
I want to be able to initiate calls on my Lync mobile client from my Lync desktop client. Is that possible?
Cheers
James

You can't really, as the mobile client can't be paired with better together. There are some instances where you kind of can, such as when starting a conference call you can have it call out to your mobile number, but this isn't really initiating a call.
You can still get rid of your desk phone, I'd just suggest using your desktop client to make the call with a headset. I will occasionally just use my iPhone headset, there are cheap 2.5mm headset to PC adapters out there. And of course you can
initiate the call with your mobile, but the experience isn't as smooth is all.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
Huff. Sad times. Oh well. Surely someone at Microsoft has thought of this scenario too?
I didn't ever find that GSM gateway unfortunately. We migrated from Avaya IP Office so could have used that but decided to go full Lync and accept the additional cost of the mobile calls.

Activate of tax code

Hi Friends,
I want to know howmay tax codes are in active status and how many are in not active status. Pls suggest me how can i know? Is there any transaction code where you can find
Regards
Babu

hi Babu,,
Please check whether u have assigned the GL account or not. Go to tcode FTXP and enter the country and select the Tax code and then double click on it and give the GL account
Tax is captured from the tax procedure by use of proper tax code or condition records.
Please check for tax procedure assignment for the country for which your plant belongs. (IMG>Financial Accounting (New)>Financial Accounting Basic Settings (New)>Tax on Sales/Purchases>Basic Settings-->Assign Country to Calculation Procedure)
please ensure the respective tax procedure TAXINN or TAXINJ. (Please ensure tax procedure is created in your system).
After assingment of tax procedure to the country, you need to create the tax codes for the country using transaction FTXP
T code : OBBG to check the tax procedure assigned to your country
T code : OBYZ select a procedure or create(copy any) tax procedure and assign to your country in OBBG
if u want to To avoid selecting unused Tax Codes mistakenly, is the only way to put a Validation in GGB0. Otherwise if you don't want' to display the unused Tax Codes in the Match code (F4) is just by adding all the useful Tax Codes to "Insert in Personal list" (a button appear if you press F4). Once you insert all your useful Tax Codes to this list next time onwards it will show only useful Tax Codes, but remember one thing it is a user specific.
you can deactivate the line impacting zero tax even if mistakenly used.
thanks
Assign the points if helpfulll
Ranjit

How to copy tax procedure TAXINJ from Client 000 to Dev client in ECC 6.0

Hi,
We are facing a problem for TAXINJ and TAXINN procedure, which are not available in our development client, but available in client 000.
Please advice how to copy those procedures from client 000 to development client.
(In client 000, we can not create a trabnsport request).

Hello ravi,
first check whether there request being generated at the time og customization in the server where the standard procedures exist.
if yes,then you just need to change a little bit of description of these procedures and save system will ask for the development request or customization request.,you can then ask the basis guy to transport it.
remember it is only a work around solution.
nevertheless you can also create it manually
revert if helpful
Mohit Singh

Create users for other clients from client 000

Hello!
I have the following question:
What is the Tcode allows me to see all created users (perhaps wuth their password) in all clients from e.g. client 000?
Is it possible to create new users for other clients from client 000?
Thank you very much!
regards
Thom

<b>SU10 User Mass Maintenance</b>
SCUA Central User Administration
SCUM Central User Administration
SCUG Copy users
SU01/SUCOMP User Maintenance/User company address maintenance
SU01D User Display
SCUL Central User Management Log

Is it possible to send varient from one client 800 to another client 810

hi
is it possible to send varient from one client 800 to another client 810,
could u plz explain clearly,

Hi,
You can use the transport mechanism to transport variant.
Go to SE38, type in the report name and choose "Variants". Then select the variant and choose the menu Utilities -> Transport request. Add the variant to an existing transport.
Then use the standard procedures to move the transport request from client to client.
Hope this helps (please reward me if it does).
regards, Joerg

TAXINN Tax procedure is not appearing in IDES SAP ECC 6.0 client 800

Hello Gurus,
TAXINN Tax procedure is not appearing in IDES SAP ECC 6.0 client 800. Can anybody tell the step by step procedure to get it done??
It is very urgent.
Thanks

Hi,
TAXINN has to be copied from '000' client to our client.
check following
[http://forums.sdn.sap.com/thread.jspa?threadID=1540232]
Regards
kailas Ugale

While creating Client from SAP000,can we get any standard data?

I am going to create new client in SAP from the scratch.I no need any datas on the client.for that datas I am going to activate BC sets.so can any one explain the Basis steps to create empty client?

Hello tjk,
Create a new client from client 000 with client copy profile SAP_USER.
With this profile:
Users, user roles, and authorization profiles are copied.
No Customizing
No Application data
***Remember, All Client independent data is available in your newly created client.
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

How to unlock DDIC & SAP* user in 000 client-Sybase database

Dear Experts,
Accidentally DDIC and SAP* user in 000 client has locked. We are using SYBASE ASE database. I know how to unlock user in other database (eg:update <sid>.USR02 set UFLAG = 0 where BNAME = '<user id>'' and mandt = <clinet number>;).
what is the equal query in Sybase.
Thanks, Jyothish

Hi Jyothish,
Please try below commands
Login to Sybase ASE database using
isql -Usa -S<SID> ( it will prompt for password)
use <DBSID>
To check the account status
select UFLAG from USR02 where BNAME ='SAP*' and MANDT='000'
go
To unlock the account
update USR02 set UFLAG=0 where BNAME='SAP*' and MANDT='000'
go
You may add schema owner SAPSR3.USR02 in the query if above query does not work.
Hope this helps.
Regards,
Deepak Kori

Which client should be use 000 or 001 for Client Copy

Hi,
Which client we can use 000 or 001 for fresh Client Copy.
Also what is the diff. b/w 000 and 001 client and its uses...
Please suggest.

Hi
Always use client 000, except for solution manager systems.
Best regards
550894 - CC-ADMIN: Setting up a new client
Always use client 000 as a template, and never client 001. (A known exception is the SAP Solution Manager.)
Do not copy any application data from client 000 because the consistency of data and the number ranges cannot be guaranteed.
Only client 000 is populated with upgrades, Legal Change Packages, Support Packages, language imports and so on with new Customizing so that it always contains the current sample Customizing. This is why it is also so important that the copy is only carried out after the system is updated. Client 001, on the other hand, is obsolete. It serves only as a sample client and may be deleted at any time.

How to login into 000 client -- sap* in ecc6.0

how to login into 000 client--sap* in ecc6.0
because i need to generate solution maneger key.
or tell me any alternate for generating the same.
Edited by: THIRU MALAI on May 9, 2008 9:55 AM

Hi,
1. You have to Configure the Email connections through SCOT tcode.
2. After that you ccan send/recive a mails from exchange server and SAP R/3 systems.
Look into the following link.
http://help.spa.com--> search for E-mail configuration and aslo search for FAX configuration.
Regards,
Srini Nookala

Client from 800 to 000 client to activate the TAX Procedures..

Similar Messages

Maybe you are looking for