Client host rejected: Access denied

Getting a ton of bounced back emails most likely the address is no longer in use but I filtered out any of the emails that say so. I'm no professional at this thats why I'm looking for help here. I tried searching for the problem on the forum but found
stuff about server 2003.
Im getting alot of the kickbacks saying Client host rejected: Access denied
I've tried emailing the recipient on my personal Gmail and recieved the same error. can we safely say that the addresses are no longer in use that i'm getting these kickbacks? heres the full header for anyone
who wants to look.
The original message was received at Wed, 5 Mar 2014 15:29:34 -0500 from odbmap07.extra.chrysler.com [129.9.107.35]
   ----- The following addresses had permanent fatal errors ----- <mail address here>
    (reason: 554 5.7.1 <unknown[151.171.97.83]>: Client host rejected: Access denied)
   ----- Transcript of session follows ----- ... while talking to odbmap07.out.extra.chrysler.com.:
<<< 554 5.7.1 <unknown[151.171.97.83]>: Client host rejected: Access denied
554 5.0.0 Service unavailable
We are using someone to host our email server for more information.
I use a program called G-Lock easy mail to send out our newsletter.

Hi,
Which email client are you using to send and receive emails? G-Lock?
Please refer to the links below and check if they help:
http://www.symantec.com/business/support/index?page=content&id=TECH169847
http://support.mailhostbox.com/email-administrators-guide/error-codes
In addition, if you are not using Microsoft Outlook as your email client, it's better to contact the support for your mail client for further assistance.
Best Regards,
Steve Fan
TechNet Community Support

Similar Messages

Exchange 2010: Sender address rejected: Access denied

hi friends
i have been recently experiencing an issue with one of my customer which i send email i get bounce message while i can receive their emails with no issue. i have exchange 2010 installed and im using Anti spam device too. my domain is ok.com
i try to send from OWA as well but i get the same result.
Delivery has failed to these recipients or groups:
[email protected] A problem occurred during the delivery of this
message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: antispamServer.ok.com
[email protected] #< #5.0.0 X-Spam-&-Virus-Firewall; host mail.abc.com[22.22.22.12] said: 554
5.7.1 <btv1==14869c83b8f==[email protected]: Sender address rejected: Access denied (in reply to RCPT TO command)> #SMTP#
Original message headers:
any idea?
thanks

hi
when i disable the antispam device i get this error
smtp5.relay.iad3a.emailsrvr.com rejected your message to the following e-mail addresses:
[email protected]
smtp5.relay.iad3a.emailsrvr.com gave this error: <[email protected]>: Sender address rejected: Access denied
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another
restriction may be preventing delivery.

Recipient address rejected : Access denied (in reply to RCPT TO command)

Hi,
I run Mac OS X Server 10.5.5 with mail service. smtp is on port 587. I created an account which only forward to another account on an external domain.
When trying to send a mail from outside to that account, the sender receive "554 5.7.1 <[email protected]>: Recipient address rejected : Access denied (in reply to RCPT TO command)".
Any idea?
Kind regards,
Xavier.
Here is my postconf:
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = xavier
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 20971520
mydestination = $myhostname,localhost.$mydomain,localhost,jehin.net
mydomain = jehin.net
mydomain_fallback = localhost
myhostname = mail.jehin.net
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost = relay.skynet.be
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdenforcetls = no
smtpdpw_server_securityoptions = none
smtpdrecipientrestrictions = permitmynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = no
smtpdtls_certfile = /etc/certificates/Default.crt
smtpdtls_keyfile = /etc/certificates/Default.key
smtpdtlsloglevel = 0
smtpduse_pwserver = no
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
virtual_transport = lmtp:unix:/var/imap/socket/lmtp

I apologize... Was trying to find a solution too and looks like I forgot to inform you about that point ...
This is the new result in log (for an outside mail):
Oct 27 22:26:54 jehin postfix/tlsmgr[15509]: warning: no entropy source specified with parameter tlsrandomsource
Oct 27 22:26:54 jehin postfix/tlsmgr[15509]: warning: encryption keys etc. may be predictable
Oct 27 22:26:54 jehin postfix/smtpd[15508]: connect from mhfr-03-bos.mailhop.org[63.208.196.167]
Oct 27 22:26:55 jehin postfix/trivial-rewrite[15511]: warning: do not list domain jehin.net in BOTH mydestination and virtualmailboxdomains
Oct 27 22:26:55 jehin postfix/smtpd[15508]: NOQUEUE: reject: RCPT from mhfr-03-bos.mailhop.org[63.208.196.167]: 554 5.7.1 <[email protected]>: Recipient address rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<mhfr-03-bos.mailhop.org>
Oct 27 22:26:55 jehin postfix/smtpd[15508]: disconnect from mhfr-03-bos.mailhop.org[63.208.196.167]
Telnet test:
sh-3.2# telnet jehin.net 587
Trying 81.245.99.141...
Connected to jehin.net.
Escape character is '^]'.
220 mail.jehin.net ESMTP Postfix
helo me
250 mail.jehin.net
mail from:
250 2.1.0 Ok
rcpt to:<[email protected]>
554 5.7.1 <[email protected]>: Recipient address rejected: Access denied
quit
221 2.0.0 Bye
Connection closed by foreign host.
its log:
Oct 27 22:29:02 jehin postfix/smtpd[15528]: connect from unknown[10.185.112.199]
Oct 27 22:30:11 jehin postfix/trivial-rewrite[15532]: warning: do not list domain jehin.net in BOTH mydestination and virtualmailboxdomains
Oct 27 22:30:11 jehin postfix/smtpd[15528]: NOQUEUE: reject: RCPT from unknown[10.185.112.199]: 554 5.7.1 <[email protected]>: Recipient address rejected: Access denied; from= to=<[email protected]> proto=SMTP helo=<me>
Oct 27 22:30:20 jehin postfix/smtpd[15528]: disconnect from unknown[10.185.112.199]

Group mail not delivered - "Recipient address rejected: Access denied"

Apparently I'm not alone who is having the issue with mails being rejected while the addresses are fully valid.
Specifically, I have a mail distribution group created, with several e-mail addresses configured. The group is properly set to accept mails from the outside of the company.
The emails sent from the company accounts are delivered properly. However, when an email is sent from the outside, it gets "Recipient address rejected: Access denied" error message back. There is no trace of such an email in "message trace".
What helps (others on the forum as well as me) is switching the Domain type in Mail flow / Accepted domains from Authoritative to Internal relay. The emails start to be delivered.
The main reason why I do not want to have ths setup is that when an invalid email address is used, the email apparently keeps going in rounds between servers until the maximum number of hops is reached and then the message that is sent back to the sender
is just that - "554 5.4.6 Too many hops".
Is there any intention to tackle this problem?

Hi,
The first thing that comes to my mind is the 'Require that all senders are authenticated' setting. Is that setting to found your distribution list? If, try uncheck that.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

After updating to Yosemite Server, one client now has Access Denied error on file sharing.

Just updated the law office from a Mavericks site to a Yosemite site. Everything is working fine except that one client now cannot connect to the file shares - Permission Denied, Contact your system administer error. I've looked through the permissions and even completed a Repair Permissions. What else can I do to get this client on-line with file sharing?

Is the client connecting with the same credentials as the others? I tend to doubt it.

Mail error 5.1.0 - Unknown address error 554-'5.7.1 user@rjh.school.nz : Recipient address rejected: Access denied'

Cannot receive mail in. Can send mail out.
Result of postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 83886080
mydestination = $myhostname, localhost.$mydomain, localhost, rutherfordint.co.nz, rjh.school.nz, hpcfootball.info
mydomain = rjh.school.nz
mydomain_fallback = localhost
myhostname = mail.rjh.school.nz
mynetworks = 127.0.0.0/8,rjh.school.nz,rutherfordint.co.nz
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = hash:/etc/postfix/smtpdreject cidr:/etc/postfix/smtpdreject.cidr permit_mynetworks permit_sasl_authenticated permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,login
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy reject
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.rutherfordint.co.nz.C3479A3DA932D042025B19ACAEA2F77EE5 C1AF86.chain.pem
smtpd_tls_cert_file =
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_use_pw_server = yes
smtpd_use_tls = no
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_domains = $virtual_alias_maps hash:/etc/postfix/virtual_domains
virtual_alias_maps = hash:/etc/postfix/virtual_users

I'm getting the same errors and well having issues with virtual domains, even after I add user e-mails in INFO tab in workgroup manager.
: Recipient address rejected: User unknown in virtual alias table [RCPT_TO]

Access denied when trying to connect client cd rom to vm

Hey guys,
One of my users is using the client to build a vm, tries to connect their cdrom using the client and gets access denied. What is the minimum permissions needed to be able to connect a remote physical cd rom to a vm? VC 2.5, esx 3.0, I believe they currently have virtual machine power user role on the object.
Respectfully,
Matthew
Kaizen!

Hey Guys,
I think there is something else going on here Probably not permissions or roles, maybe a service needs restarting? The user gets the following error:
Exception of type Vmomi.fault.no permission' was thrown
Ideas?
Respectfully,
Matthew
Kaizen!

SendFailedException: 554 - Access denied ?!

Hi people,
The following is a piece of code, my first try on JavaMail API....
public class SendMail {
public static void main(String[] args) {
try {
String host = "smtp.vsnl.com";
String from = "[email protected]";
String to = "[email protected]";
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.host", host);
// Get session
Session session = Session.getDefaultInstance(props, null);
// Define message
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject("Hello JavaMail");
message.setText("Welcome to JavaMail");
// Send message
System.out.println("Sending the message.......");
Transport.send(message);
System.out.println("Message sent..............");
}catch(Exception ex){
ex.printStackTrace();
The output -
Sending the message.......
Sending failed;
nested exception is:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <[email protected]>: Sender address rejected: Access denied
The mail ids here are valid and infact I also tried some other non-yahoo / hotmail ids, but it still does not work !!!!!!!
Any fixes to be done to the code ??
Regards.

The SMTP server is setup to not relay messages for [email protected] This is generally done so someone cannot use the server to send spam out to the net. The server is probably setup to only relay messages for addresses and machines on its own domain. Try changing the from address to an address on the servers domain. It may not need to be a valid address although some machines are setup to check that too.
You can also try contacting the administrator of the server to see if there is anything he can/will do.

ClientContext.ExecuteQuery(); gives access denied error in sharepoint provider hosted app

Hi Team,
I am using the sharepoint office 365 to build the provider hosted app.
Please find the below code to access the data from sharepoint
var siteUri1 = new Uri("https://site.sharepoint.com/sites/site1/");
var realm = TokenHelper.GetRealmFromTargetUrl(siteUri1);
var accessToken1 = TokenHelper.GetAppOnlyAccessToken(TokenHelper.SharePointPrincipal, siteUri1.Authority, realm).AccessToken;
using (var clientContext = TokenHelper.GetClientContextWithAccessToken(siteUri1.ToString(), accessToken1))
Web web = clientContext.Web;
clientContext.Load(web.Webs);
clientContext.ExecuteQuery();
var webdetails = web;
clientContext.ExecuteQuery(); this line gives the below error
An exception of type 'Microsoft.SharePoint.Client.ServerUnauthorizedAccessException' occurred in Microsoft.SharePoint.Client.Runtime.dll but was not handled in user code
Additional information: Access denied. You do not have permission to perform this action or access this resource.
Please help me on this.

Thanks for your reply
I already included AllowAppOnlyPolicy="true" in the
AppManifest.xml file.
Below line always gives the null value.
string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);Please help me on this. I am new the the apps.

Financial Reporting 11.1.1.3 Client "Access Denied" connecting to HFM

Hi,
I have installed Financial Reporting 11.1.1.3 Client on a PC running Windows Vista 32 bit SP1. When I try to access to a report created form another PC that connects to HFM, it says "Error connectiong to server" and "Cannot connect to database "X": Access Denied". The native user is the same that created the report; on the same machine, I can succesfully access HFM applications from HFM client and Rule editor.
Any idea?
Thanks

Dear John,
How to install latest Version of Hyperion HFM
1) I had downloaded Hyperion Enterprise Performance Management System Foundation Services, Product specific Essabase and Financial Management , and unzip into common folder . but stll iam not able to see Installtool.cmd
which part i have still dowloaded.
Regards
Amit

Access denied report App\Client SDK

Server crashed, therefore I reinstalled Crystal Reports 9 & Crystal Enterprise 9 and attempting to rebuild the ASP pages which pass report parameters. The error received is:
Technical Information (for support personnel)
Error Type:
webReporting.dll (0x80004005)
Access denied. Please check directory setting for files you can access.
/HTMLViewers/reportgenerator.asp, line 31
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 2.0.50727)
Page:
GET /HTMLViewers/reportgenerator.asp
Line 31 on the page reads:
.processHttpRequest Request, Response, Session
Running the registry moniter I receive an access Denied for hklm\software\Crystal Decisions\9.0\report App\client SDK
This is my first time on the forum, hope I explained myself properly.

Thanks Shaun, I appreciate your link for the process monitor application. This replaces my older seperate reg mon & file mon apps.
I have now been able to determine that my application is getting to where it is calling the cachemanager.dll and it is experiencing the problem. I tried manually registering this dll and receive the error Loadlibrary("cachemanager.dll")failed. GetLastError Returns 0x00000007e.
If I change the ASP pages to a very simple process, it will run the demo report, and my report. Once I attempt to use the ASP page with the login requesst, and parameter call I receive this error.
Error Type:
webReporting.dll (0x80004005)
The system cannot find the path specified.
/HTMLViewers/reportgenerator.asp, line 31
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 2.0.50727)
Page:
GET /HTMLViewers/reportgenerator.asp
The reportgenerator ASP page which is causing this error is:
trace.write(category,message)
trace.warn(category,message)
<%@ Language="VBScript"%>
<%
'Declare variables for the report viewer and the ObjectFactory objects, and create the ObjectFactory object.
Dim ObjectFactory, userName, password
dim clientid
dim reportid
clientid = request.querystring("Clientid")
session("Clientid") = clientid
reportid = request.querystring("reportid")
' open a report
' copy this report to "Report Directory" in RAS Configuration Manager
Session("ReportName") = "C:\Program Files\Crystal Decisions\Report Application Server 9\Reports\logonparm\" & reportid
userName = "SYSDBA"
password = "masterkey"
'Create the ObjectFactory for use in creating other Crystal Objects
Set ObjectFactory=CreateObject("CrystalReports.ObjectFactory.2")
'Instantiate the Server Control object which allows us to collect information about the required
'inputs to run the report
Set ServerControl = ObjectFactory.CreateObject("CrystalReports.CrystalReportServerControl")
With ServerControl
   .ReportSource = Session("ReportName")
   .EnableLogonPrompt = False     ' Set this to false so that we can override the controls prompting for logon
   .processHttpRequest Request, Response, Session
End With
Set Session("ReportParameters") = ServerControl.ParameterFields
' Set Login info for all connections
' ***************** Added to logon using Viewer SDK *****************************
Set connectionInfos = serverControl.databaseLogonInfos
For x=0 To connectionInfos.count - 1
     Set connInfo = connectionInfos.Item(x)
    connInfo.UserName = CStr(username)
     connInfo.Password = CStr(password)
Next
For each parameter in Session("ReportParameters")
          Set parameterField = parameter
          paramName = parameterField.Name
          if paramName = "INTERFACE ID" then
               Dim paramValue
               Set paramValue = ObjectFactory.CreateObject("CrystalReports.ParameterFieldDiscreteValue")
               paramValue.Value = session("Clientid")
               parameterField.CurrentValues.RemoveAll
               ' Add this value to current value list
               parameterField.CurrentValues.Add paramValue
          end if
Next
Set clientDoc = CreateObject("CrystalClientDoc.ReportClientDocument")
clientDoc.Open session("ReportName")
set session("oclientdoc")=clientdoc
Session("pathReport") = pathReport
Set Session("connectionInfos") = connectionInfos
Response.Redirect "Viewer.asp"
%>
My appologies if I do not explain my problem well. I am not an ASP programmer, and am desperatly looking for assistance to resolve this problem. If anyone can refer a contract programmer that would be interested and capable of assisting me, that would be appreciated. I believe I am close to resolving this problem. I purchased a support session only to find out that this version is no longer supported.

Group Policy client Service Error - Access is denied

I am
at domain admin working on windows 7 roaming profiles, testing with a
staff user. I am in a domain environment. I have changed the
profile path for a user to the folder I created for new windows 7 roaming
profiles. gave it all the permissions noted here and followed these steps
at Microsoft's deploying roaming profiles page for win 7.<o:p></o:p>
once I logged in the user,
it created their profile.v2 but I still couldn't access it. getting
access denied. so I went back and changed the staff roaming profile back
to the original profile path. didn't make any group policy changes.
but now she gets group policy client service failed to logon. access is
denied. I have deleted the .v2 profile that win 7 creates in her old
profile path, moved her profile path back to what is was before testing,
retested her xp profile which does work and she can login and work.
but the win 7 machines no matter where she logs in, will not work. they
all give the same error about group policy client service failed. no
other users are having this problem

Hi,
Regarding the issue here, have you checked the below thread?
Group
Policy Client Service Failed the logon - Access Denied: Windows 7 Ultimate/Server 2008 R2
Please take a try with the steps mentioned by Nina Liu.
QUOTE here:
At this time, let’s refer to the following steps for troubleshooting:
1. Open registry editor on the problematic Windows 7 machine (please log in as domain admin)
2. Highlight HKEY_USERS, choose File -> Load Hive, browse to the location of one failing roaming profile and open NTUSER.DAT file, click open
3. Under Key Name, enter any name you like, but remember what you have entered, such as enter "test"
4. Expand, HKEY_USERS, you should see new registry hive called "test" or any name you entered earlier
5. Right click on that "test" hive and choose permissions. Confirm that the following users have permissions:
- Administrators: Full Control
- SYSTEM: Full Control
- User (or group) that owns this profile: Full Control
6. If the permissions were wrong, correct them, then click on Advanced tab, on Advanced tab and enable "Replace permission entries on all child objects with entries
shown here that apply to child objects" and click Apply.
7. Highlight "test" registry hive, then click on File -> Unload Hive to release handle on NTUSER.DAT file.
8. Log off and log on with the failing roaming profile you have just modified.
Any process, please feel free to contact us.
Best regards
Michael Shao
TechNet Community Support

Access denied while loading jar files from client

I am creating a platform
that can be started by JWS
and then load plug-ins from client drive.
I've signed my platform (packaged as a jar file),
and set up the security tag in my jnlp,
so that it can access client files.
The plug-ins are packaged as jar files.
And in one of the plug-ins, there is a class that has a JFileChooser field.
While initializing this field, the AccessControlException is thrown.
I can't figure out what is wrong,
So I tried to sign the plug-in, but the problem stands still.
PS. I have made my own ClassLoader,
and this platform works well without JWS.
Please help me, thanks.
Below is the error message:
Java Web Start 1.4.2 主控台,已啟動 Fri Jul 02 01:31:17 CST 2004
Java 2 Runtime Environment:版本 1.4.2,作者:Sun Microsystems Inc.
/*my own log message*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate /*this is my own classloader*/
配置: activate jar=\Plugins\Common.jar /*load plug-in Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: collect resources /*collect other jar files needed by Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: load plugin=\Plugins\Common.jar
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: activating class name=filemanager.FileManager /*instantiate plug-in component*/
java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at java.io.Win32FileSystem.getUserPath(Unknown Source)
     ... /*cut*/
     at javax.swing.JFileChooser.<init>(Unknown Source)
     at filemanager.Open.<init>(Open.java:20)
     at filemanager.FileManager.<init>(FileManager.java:38)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     ... /*cut*/
     at java.lang.Class.newInstance(Unknown Source)
     at pluginmanager.Activater.activate(Activater.java:120)
     at pluginmanager.PluginManager$ActivateAction.actionPerformed(PluginManager.java:53)

When running under Java Web Start, a security manager is installed.
Since you have created your own classloader, you are responsible for assigning permissions to the classes you load.
You can change you class loader to extend SecureClassLoader, then override getPermissions:
protected PermissionCollection getPermissions(CodeSource codesource) {
PermissionCollection perms = super.getPermissions(codesource);
/* add whatever permissions you want your code to hance*/
perms.add( ... );
/* or just add all-permissions */
perms.add(new AllPermission());
or - you can just remove the Security Manager:
System.setSecurityManager(null);
/Dietz

Host command in application FORMS (access denied)

i try to use a host command in a form in apllication server vs 1.0.2.2a that call a copyfile.bat.
J see that this operation send me a message to the server console with "access denied", instead if a use this file from the server works.
Do you Know something??

Check out the file and directory permission for the files you are trying to manipulate. Make sure that the user that runs the Forms Seever have the requiered permissions to manipulate these files and directories.

Access denied: HTTP - Host Request with Widget Foundation + Yahoo

Hi,
I have a problem with the new Yahoo widget engine's (4.5) suggested structure, when trying to execute an RFC request.
An older version of my .kon file has a classic structure, and it works fine, I write the script into the .kon file, it looks like this:
        <action trigger = "onLoad">
        <![CDATA[
                 // Standard SAP Widget Foundation Libraries
                 include("js/utils/Common.js");
                 include("js/utils/PlatformUtil.js");
                 include("js/utils/Timer.js");
                 include("js/utils/DataLoader.js");
                 include("js/utils/RFCRequest.js");
                 request.execute(function(response) ...
        ]]>
        </action>
When I try to use the new structure (the .kon file contains only the source of the script, no CDATA, just 'src = "Scripts/Main.js"' ), and execute the request from the source JavaScript file, then I get this error:
utils.DataLoader]> Exception was catched: XMLHttpRequest.send(): Access denied: HTTP - Host Request.
Saw anybody this problem already?
Thanks,
Gyuri

Hi,
Yahoo has added security control in widgets since 4.5. You should add tag <security> in your widget.xml
     <security>
          <http>all</http>
          <filesystem>full</filesystem>
          <command>true</command>
          <hotkey>true</hotkey>
     </security>
http://widgets.yahoo.com/static/downloads/WidgetsReference_4.5.zip page 33.
Eriks

Client host rejected: Access denied

Similar Messages

Maybe you are looking for