Client independent and Dynamic Test data upload

Hi all,
1. While creating the Script as part Attribute we r specefying Target Sys. to record.
   If i want to execute same script name some other client, without changing the Target sys., is it runs by defining that RFC for that sys. in Sys. Data container?
   2. i am specefying   the location of test data file as part of test data container and sys. data container's.
       Whenever i make the changes in the test data in the Excel Interface, it is not automatically updating in the Test data container or Test configuration?
       Is it req. to go to test data container -> Edit -> Varients -> Upload. each and every time the changes made?
   Any solution with u?
Regards,
Sreedhar

Hi Sreedhar,
Check this link for question # 1... How to parameter Target System in eCATT
For Question # 2, As far as my knowledge goes, once you upload an excel, repository will only store the present copy of the test data, not the shortcut of the excel and then keep on updating for every change that is made in the test data repository. So you will have to upload the again when ever any changes are being made.
Others @ Pl correct me if I was wrong in saying that.
Hope this answer helps.
-Harsha

Similar Messages

Which are client independent and dependent objects in SAP ABAP

which are client independent and dependent objects in SAP ABAP

Hello Jagrut
A special kind of objects are client-dependent repository objects. These objects have to be treated specially in the way that they have to be imported into their specific target client. In contrast, client-independent repository objects can be imported into any client.
The following list shows the client-dependent repository objects:
LIMU FSEL Field Selection
LIMU VARI Report Program System Variant
R3TR COC1 CO: Cost Centers
R3TR COC2 CO: Activity Types
R3TR FORM SAPscript form
R3TR LODS HRDSYS: Logical information object client-dep. table E SYST
R3TR PCYS HR: Transport standard personnel calculation rules
R3TR PHDS HRDSYS: physical information object client-dep. table E SYST
R3TR SBNL Logical Information Object for BDS
R3TR SBNP Logical Information Object for BDS
R3TR SBNR BDS: Relationship Between Information Objects
R3TR SBPL Logical Information Object for BDS: Bid Invitation
R3TR SBPP Physical Information Object for BDS
R3TR SBPR BDS: Relationship Between Information Objects
R3TR SBRL Logical Information Object for BDS
R3TR SBRP Physical Information Object
R3TR SBRR BDS: Relationship Between Information Objects
R3TR SBSL Logical Information Object for BDS
R3TR SBSP Physical Information Object
R3TR SBSR BDS: Relationship Between Information Objects
R3TR SBTL Logical Information Object for BDS
R3TR SBTP Physical Information Object
R3TR SBTR BDS: Relationship Between Information Objects
R3TR SBWL Logical information object for BDS
R3TR SBWP Logical information object for BDS
R3TR SBWR BDS: Relationship between information objects
R3TR SRHL SRM: Hierarchical Lists
R3TR SRLD Language-Dependent Client-Specific Retrieval Index Objekt
R3TR STYL SAPscript Style
Regards
Uwe

Client independent and dependent tables

Hi,
Is there any report or program to get list of all client independent and dependent tables from a client in sap ECC6.0 ?

Check the table DD02L and the field CLIDEP. If its set as X they are client dependent tables else client independent tables.
Vikranth

Client independent and dependent transport request

Hi
I have a list of transport requests, I need to find which is a client independent and which is client dependent request.
I am aware that workbench req is client independent and customizing req is client dependent.
But i think i need to look someting else also, please help
Regards

Very interesting!
As we all know that customizing requests are always client dependent, the question obviously target workbench requests.
To my knowledge tables are always cross-client, but their contents are not necessarily.
As one can put table -contents- into a workbench request as well, this one would thus be client dependent. Same applies e.g. for forms.
But E070* does not give any information about the transport contents.
E071* however states the objects included, but not if those are client dependent or not.
How are table -contents- and forms reflected in E071* ? Can I filter for those somehow?
Thanks
Christoph

Why does my site look nothing like the design and during testing once uploaded to the server?

Why does my site look nothing like the design and during testing once uploaded to the server?,
Im using Muse whichj crashes like you would not beleive, but after much perseverance I got a basic 4 page holding site together, I tested the site and it all looked fine, when I uploaded it to the server it looks nothing like the site I tested, to the point that even the background has changed colour and nothing is in the rite place.

Hi John, Sure it's
http://www.thezine.co.uk
thanks
it should be looking like this

Spry:Content and Dynamic Spry Data

Is there a way to get the spry:content attribute to work well
with dynamic data generated from PHP/MySQL? I have read the
progressive enhancement article and I am totally lost on it.
The provided examples in the documentation deal with static
data but there are so example of using spry:content and dynamic
data.
Can anyone help?
Thanks

Hi Arnout
These are the urls:
http://www.grafikkaos.co.uk/pages/front/test_home.php
- this one displays the spry:content properly, but in the source,
it does not show the 5 articles.
http://www.grafikkaos.co.uk/pages/front/test_home_2.php
- I applied a PHP repeat region here. In the source, it shows 5
articles being shown but on page view, each title and date is
repeated 5 times.
Any ideas?
Thanks

How to download and restore test data directory / se37

Hello comunity,
ahead of me lies a system refresh. in tc se37 according to several function modules i have recorded several test-data-sets in test directory. After the system refresh they will be gone. i assume there are ddic-tables behind my personally saved test data records.
now i wonder, does anyone know a functionality (program, fm, etc.) on
1. how to download "my" test data directory entries ?
2. how to restore them into the test data directory once after the system refresh ?
for sure, somebody does. please gimme a hint. answers will be rewarded with credit points.
Thanx in advance!
Gunther
Message was edited by:
Gunther Stauch

Hmm...
Maybe this is useful -> table EUFUNC
Check the FMs from Function group SEUJ ,
FM RS_TESTDATA_GET looks promising-reading.. and so also RS_RFC_TESTDATA_GROUP_TRANSFER
Maybe you can write a small program which downloads all the contents of the table and later updates it using one of the above FMs
Also check with the BASIS team about the options -> There are many options available like maintaining the previous settings... (I know that passwords may not be refreshed similarly this option may also be available..)
REgards,
Arun

Monitoring and automating the data upload

Hi experts,
we are using SAP-BW and SEM-BCS
Is it possible in BCS monitor the data upload of a flexible upload or data stream.
Who, when, how many data and from which flat file (if it is a flexible upload) uploads ?
How can i load over a data stream or flexible upload automatically, can i use BW process chains to automate ?
Thanks.

Hi Eugene,
Thanks for your reply for data load automation.
We have SEM-BW 600 Support Package13
can you provide some SAP-help links for monitoring of uploads ?

Client independent and dependent

Hi All,
What are the Client dependent objects and independent objects in Financial Accounting and Controlling?
Urgent please
Thanks and regards
Krishna

Go to SPRO-Additionl information-Technical data- Client specific.
The to the right of the implementation guide categories you'll see either Client-specific (customizing) dependent or Cross-client (workbench-independent)
pls assign points to say thanks.

Client independant and client dependant

can anybody explain me what exaclty is clientdependant and independant..also cross client means?
thanks and regards
vijaya

Hi Durga,
    As the name says
    Client - for example assume there is company called
             "sony". It can have many plants across the
             countires. Sony divides these plants into
             different groups based on functionality.
             These groups are called client.
    Mostly which ever the object that is developed in the SAP will developed in a way that is usefull across users.
    But there will some sepcific needs for users/clients of SAP like language barriers....units..currecies....etc...etc. Which will be not same for all.
    Client dependent - if object is prepared taking
                       into consideration of above
                       example barriers it is dependent
                       ELSE.
                       It is client indpendent.
   Client dependent or independent can be know for the filed sy-mandt. and also in SE09

Client dependent and client independent in ALE

I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
How can i conclude
Create message type (WE81){color:green} Client independent {color}
To create a new message type, follow these next few steps:
u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
u2022 Choose Create logical message type by double clicking on it
u2022 Click on change icon to enter change mode
u2022 Click on New entries to add a new type
u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
u2022 Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
To link the message type to the IDoc type follow these next few steps:
u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
Version 1 Page 6 of 16
ALE Scenario Development Guide
u2022 Type in your message type ZINVRV and press enter
u2022 Click on New entries
u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
u2022 Save and exit.
You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) {color:green} Client dependent {color}
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
u2022 Save the entries.
Refer my query within color:green
Edited by: aditya sharma on Jul 14, 2010 12:57 PM
Edited by: aditya sharma on Jul 14, 2010 1:01 PM

A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
Eg.
Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
Smartforms are client independent, means changes done in one client will be reflected in all the clients.
Server : ECC6
Client : 100 , 200 , 300 , 400
Now suppose you have developed report in DV server client 100.
Then you will be able to see that in all clients.
Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
Now suppose you have developed a script in DV client 100.
You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

What exactly is the diff between client dependant and client independant te

Hi gurus,
What is the diff between client independant and client dependant term.. I initially had a confusion related to client independant and client dependant Transport requests, where else are these words applicable, do they apply to data as well, if so how? any links to help me understand the difference..
regards,
kishore

Hi Kishore,
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
Regards,
Dinesh D

Client Independent

What is the client concept in SAP? What is the meaning of client independent?

HI
http://www.sap-img.com/sap-introduction.htm
http://www.sap-img.com/general/what-is-sap--landscape.htm
Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
Like SAP SCRIPTS and STD texts data
where as Client Independent means the data if you create in one client that is available in that as well as in other clients
Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
In commercial, organizational, and technical terms, a self-contained unit in an SAP system with separate master records and its own set of tables.
There are different meanings.
Functionality point of View CLIENT is the highest hierarchial Orgn entity in any module
Clients again are different from each box/system like DEV,Quality and PRD.
Generally we create more clients in DEV system one for technical and other for sandbox and other for Customization etc.
This is a Mandatory field in all tables.
Each client has its own set of Application,master,data. Hence we need to populate data for each clinet separatly.(I think you cant say "implementing the SAP for the client")
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
look here:
http://help.sap.com/saphelp_nw04/helpdata/en/b7/8a9a3aaf894871e10000000a114084/frameset.htm
Client Independent(cross client) objects can be accessed from any client without transporting. For example, Reports and smartforms are client independent that means if you create a report or smartform in one client, this report and smartform can be viewed in another client without transporting.
Where as client dependent objects can be viewed or accessed only in the client in which you create them.
All scripts are client dependent and some tables are client dependent.
There are two types of objects in SAP, client dependent and client independent. Objects used in several clients are called client independent while objects used in a specific client is called client dependent. To identify if a table is client dependent, one can use tcodes SE11 or SE12. In the table field attributes, if the MANDT field is present that table is client dependent.
Almost all the programs and database objects are client independent.
Only the data in Database tables are client dependent.
Go through the below PDF file, it is having 4 pages which explains why SAP has Client independent and Client dependant..
http://www.sappoint.com/basis/clntadm.pdf#search=%22ABAP%20%2B%20client%20independent%20and%20client%20dependant%20%22
Create client????
Goto Tcode su01,
Client 810
Give user name sap*
password:06071992.
presss continue.
In the next screen :
User: Sapuser
Press creat buttom in the application tool bar ,
In address tabstrip : give ur name last name and first name ,
click on logon data: here u give the initial password, suppose password is = nihar
click on profile give : SAP_ALL
SAP_NEW
Press save buttom .
Now ur client 810 created
Goto the SAP EASY Access Screen
Give client : 810
User: sapuser
password: nihar
press enter
Again system will ask for final password.
Give here exiting password: nihar
new password: india.
check this
needed very urgently: ABAP real time questions and answers
check the below link u will find lot of info..
https://forums.sdn.sap.com/click.jspa?searchID=1815764&messageID=1967306

Templates and Dynamic Memory Allocation Templates

Hi , I was reading a detailed article about templates and I came across the following paragraph
template<class T, size_t N>
class Stack
T data[N]; // Fixed capacity is N
size_t count;
public:
void push(const T& t);
};"You must provide a compile-time constant value for the parameter N when you request an instance of this template, such as *Stack<int, 100> myFixedStack;*
Because the value of N is known at compile time, the underlying array (data) can be placed on the run time stack instead of on the free store.
This can improve runtime performance by avoiding the overhead associated with dynamic memory allocation.
Now in the above paragraph what does
"This can improve runtime performance by avoiding the overhead associated with dynamic memory allocation." mean ?? What does template over head mean ??
I am a bit puzzled and i would really appreciate it if some one could explain to me what this sentence means thanks...

The run-time memory model of a C or C++ program consists of statically allocated data, automatically allocated data, and dynamically allocated data.
Data objects (e.g. variables) declared at namespace scope (which includes global scope) are statically allocated. Data objects local to a function that are declared static are also statically allocated. Static allocation means the storage for the data is available when the program is loaded, even before it begins to run. The data remains allocated until after the program exits.
Data objects local to a function that are not declared static are automatically allocated when the function starts to run. Example:
int foo() { int i; ... } Variable i does not exist until function foo begins to run, at which time space for it appears automatically. Each new invocation of foo gets its own location for i independent of other invocations of foo. Automatic allocation is usually referred to as stack allocation, since that is the usual implementation method: an area of storage that works like a stack, referenced by a dedicated machine register. Allocating the automatic data consists of adding (or subtracting) a value to the stack register. Popping the stack involves only subtracting (or adding) a value to the stack register. When the function exits, the stack is popped, releasing storage for all its automatic data.
Dynamically allocated storage is acquired by an explicit use of a new-expression, or a call to an allocation function like malloc(). Example:
int* ip = new int[100]; // allocate space for 100 integers
double* id = (double*)malloc(100*sizeof(double)); // allocate space for 100 doublesDynamic storage is not released until you release it explicitly via a delete-expression or a call to free(). Managing the "heap", the area from where dynamic storage is acquired, and to which it is released, can be quite time-consuming.
Your example of a Stack class (not to be confused with the program stack that is part of the C or C++ implementation) uses a fixed-size (that is, fixed at the point of template instance creation) automatically-allocated array to act as a stack data type. It has the advantage of taking zero time to allocate and release the space for the array. It has the disadvantages of any fixed-size array: it can waste space, or result in a program failure when you try to put N+1 objects into it, and it cannot be re-sized once created.

BOM Data upload

Hi,
We plan to create new fields in the BOM header through INCLUDE structure CI_STKO and do a data upload into these fields through LSMW. However, the issue is that CI_STKO structure is not included in the BI structure BICSK used in LSMW, hence the fields added to the BOM header through CI_STKO cannot be loaded through LSMW.
This works fine at the item level - since CI_STPO is included in BICSP.
Can anyone let me know if they have faced similar problem and are aware of a solution.
Thanks,
Vikas

Hi,
Insted of LSMW goo for BDC.. if not goo for BAPI.. you have an enhancemnet concept by using this concept you can enhance the standard BAPI.. and you can process for upload ...
BAPI_MATERIAL_BOM_GROUP_CREATE

Client independent and Dynamic Test data upload

Similar Messages

Maybe you are looking for