Client installation fail in windows 7 embedded

Hi all,
I trying to install client in Windows 7 Emb but errors bellow are showed.
The WF is disabled.
Someone has any directions?
Tks
Thyago Coan

https://social.technet.microsoft.com/Forums/en-US/84333980-b2e9-45a1-9b4f-8107db4f8cea/problem-installing-sccm-2012-r2-client-on-windows-thin-pc-7-windows-embedded?forum=configmanagerdeployment

Similar Messages

SAP B1 8.81 PL 04 Client instllation failed on Windows 7 PC

Hi Experts,
At one of my client SAP B1 8.81 PL 04 Client instllation failed on Windows 7 PC.
When I execute Setup.exe, it end with error message 1628 : Installation not completed
Thanking you in advance.
Samir Gandhi

Hi Everybody,
Issue resolved,
I did right click on setup.exe and choose Run as Administrastor
Thanks
Samir Gandhi

Cisco VPN Client installation freezes on Windows 7

Hello,
I am in need of some help installing the Cisco VPN Client on a Windows 7 workstation.
Here are some details:
Cisco VPN Client Version: 5.0.07.0410
Operation System: Microsoft Windows 7 Enterprise, 32-bit, version 6.1, build 7600
PC Hardware: IBM Thinkpad T42, Type 2373-7WE
Issue Description:
I attempted to install the Cisco VPN Client on the computer with the local administrator account in Windows 7. The computer was given a clean installation of Microsoft Windows 7 Enterprise (Existing HDD partitions were deleted and formatted). After the OS installation, I installed the network driver via Windows Update, and proceeded to run the installation for the Cisco VPN Client. The installation apears to proceed smoothly until the installation progress indicator reaches the point where it states that it is installing the "Deterministic Network Enhancer." Shortly reaching this point, the Windows CPU Usage monitor reaches 100% and the operating system freezes.
I have tried the following actions, which failed to successfully install the software:
a) Installing Cisco VPN Client 5.0.00.0340 produced the same problem.
b) Reformatted the hard drive, installed Windows 7, and tried to install the Cisco VPN Client again, but failed.
c) Used Windows 7 System Restore to restore OS state prior to the installation of the Cisco VPN Client. Then, ran Citrix's winfix.exe tool. After that, I ran Citrix's dneupdate.msi program for 32-bit Windows operating systems, but that also crashed the OS mid-way through the installation/update.
d) This URL from Citrix (http://www.citrix.com/lang/English/lp/lp_1680845.asp) suggested changing a Windows registry key, then try re-installing the Cisco VPN Client. However, that did not work.
I am at a loss as to how to resolve this issue. If anyone can provide some suggestions or a solution to this issue, I would greatly appreciate it.
Regards,
Samson

Welcome to the forums !
The only version of 10gR2 that is certified/supported on Win 7 Pro or higher is 10.2.0.5. Pl see this related thread for further information
Re: Oracle 10g 64 bit install on Windows 7 platform
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CHDFHIEA
10.2.0.5 is only available on My Oracle Support, access to which requires a valid support contract purchased from Oracle
HTH
Srini

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Client installs fail for push or manual

This one has got me stumped, hopefully someone can give me some ideas of what to look at.
Got two servers I'm trying to install the 2012 R2 client onto two servers, we'll call them DP01 and DP02. This is part of the process to install the DP role onto these servers. Doing a push or manual install fails with the below log entries:
<![LOG[Checking the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="ccmsetup.cpp:10157">
<![LOG[PROPFIND 'HTTPS://SCCM00.Skynet.com:443/CCM_Client']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
<![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:698">
<![LOG[[CCMSETUP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:699">
<![LOG[[CCMSETUP]                : dwStatusInformationLength is 4
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:700">
<![LOG[[CCMSETUP]                : *lpvStatusInformation is 0x1
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:701">
<![LOG[[CCMSETUP]            : WINHTTP_CALLBACK_STATUS_FLAG_CERT_REV_FAILED is set
]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:705">
<![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:731">
<![LOG[Failed to send HTTPS request. (Error at WinHttpSendRequest: 12175)]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068" file="httphelper.cpp:1214">
<![LOG[WinHttpRequestReponse failed with a non-recoverable failure, 12175]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1266">
<![LOG[Failed to check url HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
<![LOG[Accessing the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80072F8F]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
file="ccmsetup.cpp:10195">
<![LOG[Checking the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068"
file="ccmsetup.cpp:10157">
<![LOG[PROPFIND 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
<![LOG[Failed to correctly receive a WEBDAV HTTPS request.. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
file="httphelper.cpp:1370">
<![LOG[Failed to check url HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
<![LOG[Accessing the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80004005]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
file="ccmsetup.cpp:10195">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="0" thread="2068" file="ccmsetup.cpp:8835">
Now, firewalls on both DP01 and DP02 servers are disabled, as are the domain firewalls on both SCCM00 and SCCM02 servers.
I CAN open IE and go to HTTPS://SCCM02.web.Skynet.com:443/CCM_Client and download the files, this works on both DP01 and DP02. So the server does have access, I can also use SMB to browse to the SCCM installation path on the SCCM server from both DP01/02.
Certs on both SCCM servers and DP01/02 servers are valid and not expired.
Boundary groups are setup for the servers.
Other servers and Windows OS boxes have had no issues with client installs or DP role installs, its just these two.
I've restarted both DP and SCCM servers and still get the same error.
Pinging SCCM servers from DP servers has the correct IP's and times less than 120ms.
I know the HTTPS 403 error is Access is Denied, but I can browse to the site with no problems...

certificate chaining issue...
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383770(v=vs.85).aspx
Danovich suggests to check your FQDN vs DN:
http://blog.danovich.com.au/2010/07/09/sccm-clients-not-installing-in-native-mode/
more here (although CM07 is discussed):
http://social.technet.microsoft.com/Forums/systemcenter/en-US/931e839f-a85a-41dd-a175-5546d1316463/client-push-problem-with-ca-cert?forum=configmgrsetup
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Client installation failing

Hi, i know there are a few posts on Client installtion failing, but i couldnt find one that fitted my issue.
Short story when i tried to install I was getting this error
<![LOG[No MPs were specified from commandline or the mobileclient.tcf.]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:10065">
<![LOG[Downloading file ccmsetup.cab]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:5685">
<![LOG[Determining source location...]LOG]!><time="15:22:55.600+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43348" file="ccmsetup.cpp:5535">
<![LOG[Source \\LON1WSUS01.ewns.net\SMSClient is inaccessible (67)]LOG]!><time="15:23:00.308+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5470">
<![LOG[Source \\LON1WSUS01.EWNS.NET\SMSClient is inaccessible (67)]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5470">
<![LOG[Failed to find accessible source. Waiting for retry.]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43348" file="ccmsetup.cpp:5599">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="15:23:02.588+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43348" file="ccmsetup.cpp:8835">
I noticed I didnt have the following share 'SMSClient' so created it and put the client installtion files in it, but got the error
<![LOG[Downloading \\LON1WSUS01.ewns.net\SMSClient\ccmsetup.cab to C:\Windows\ccmsetup\ccmsetup.cab]LOG]!><time="15:07:53.147+00" date="03-17-2014" component="ccmsetup" context="" type="1"
thread="37932" file="ccmsetup.cpp:5769">
<![LOG[Failed to access source file (2). Waiting for retry...]LOG]!><time="15:07:53.164+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="37932" file="ccmsetup.cpp:5781">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="15:07:53.164+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="37932" file="ccmsetup.cpp:8835">
That was a long shot, as am sure there is a proper way to get the source files in the share, but it didnt create the share on setup of System Manager. Did I miss a step? How do i get it to populate the share with the client install files, or
create a new MP maybe?
Any assistance would be appreciated. Thanks

Managed to set MP to HTTP, thank you that was what was causing that issue, but now its coming up with a different issue
<![LOG[==========[ ccmsetup started in process 44212 ]==========]LOG]!><time="16:58:02.284+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:58:02.285+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="util.cpp:1837">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="16:58:02.286+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:58:02.286+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43496" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:58:02.287+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:58:02.383+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:58:02.386+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 480]LOG]!><time="16:58:02.387+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8668">
<![LOG[FSP: ]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="16:58:02.388+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="LON" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" CCMFIRSTCERT="1"]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4550">
<![LOG[ \\LON1WSUS01.ewns.net\SMSClient]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4557">
<![LOG[ \\LON1WSUS01.EWNS.NET\SMSClient]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4569">
<![LOG[ LON1WSUS01.ewns.net]LOG]!><time="16:58:02.389+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:58:02.390+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:58:02.392+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="wintask.cpp:622">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="16:58:02.393+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:58:02.393+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:58:02.399+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:1995">
<![LOG[Detected 50941 MB free disk space on system drive.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="16:58:02.400+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=LON))']LOG]!><time="16:58:02.425+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>480</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>LON</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=LON</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="ewns.net"
/><Forest Value="ewns.net" /></ClientOperationalSettings>']LOG]!><time="16:58:02.795+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'LON1WSUS01.ewns.net' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup"
context="" type="1" thread="43240" file="lsadcache.cpp:334">
<![LOG[MP 'LON1WSUS01.ewns.net' is compatible]LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'LON']LOG]!><time="16:58:02.797+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'LON']LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="siteinfo.cpp:575">
<![LOG[SiteCode: LON]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:2111">
<![LOG[Only one MP LON1WSUS01.ewns.net is specified. Use it.]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="16:58:02.799+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is EMEA-LON1]LOG]!><time="16:58:02.800+00" date="03-17-2014" component="LocationServices" context="" type="1" thread="43240" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="16:58:02.800+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="lsad.cpp:714">
<![LOG[Current AD forest name is ewns.net, domain name is ewns.net]LOG]!><time="16:58:02.802+00" date="03-17-2014" component="LocationServices" context="" type="1" thread="43240" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:58:02.803+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="16:58:02.803+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="16:58:02.804+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:1172">
<![LOG[Adapter {E001E119-8C95-4325-859D-D165E0DE24C3} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {1CD2E603-E441-4FA9-98A8-A122F8EA8ACB} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {143FDB8B-8137-4CDC-8836-28F3808D5D21} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Adapter {664903C0-FD2C-4988-B8F1-C14840D3188D} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:58:02.806+00" date="03-17-2014" component="LocationServices" context="" type="0" thread="43240" file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="LON"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="EMEA-LON1"/>
<Forest Name="ewns.net"/>
<Domain Name="ewns.net"/>
<IPAddresses>
<IPAddress SubnetAddress="172.22.2.0" Address="172.22.2.143"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{21FB413F-603E-40D4-A34D-1D47EDEC7F60}</ID><SourceHost>LON1-PCL-1433</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:LON1-PCL-1433:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>LON1WSUS01.ewns.net</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-03-17T16:58:02Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1080"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240"
file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://LON1WSUS01.ewns.net/ccm_system/request']LOG]!><time="16:58:02.813+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="16:58:02.833+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43240" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="3" thread="43240" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'LON1WSUS01.ewns.net'. Error 0x80004005]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="2" thread="43240" file="ccmsetup.cpp:11261">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="1" thread="43240" file="ccmsetup.cpp:9763">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="16:58:02.834+00" date="03-17-2014" component="ccmsetup" context="" type="0" thread="43240" file="ccmsetup.cpp:8835">

Lync 2010 Client installation failed

I cant install Lync 2010 Client, it fails after "following programs'll be closed" with message "Files in use check failed". It's evaluation x86 version, OS is Windows 7.
Please help me to solve the problem.
Lync-Setup-0.Setuplog error lines are here:
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: ReadRegistryString (line 2841) RegOpenKeyEx bit (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: ReadRegistryString (line 2841) RegOpenKeyEx bit (hr=0x00000002)
10/14/2010|18:15:45.101 16C0:E00 ERROR :: AddFilesForStartManagerbyRegGUID (line 2690) First reading from registry failed (hr=0x00000002)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: GetInstallDirectory (line 382) (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: CheckFilesInUse (line 1475) InitRestartManager FAILED. (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: InstallThreadProc (line 1977) FilesInUseFiles In Use check failed. Please review logfile for details and try again (hr=0x80070648)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: RestartAppsRM (line 578) RmRestart handle. (hr=0x00000000)
10/14/2010|18:15:45.102 16C0:E00 ERROR :: RestartAppsRM (line 582) RmRestart FAILED. (hr=0x80070308)
10/14/2010|18:15:45.104 16C0:E00 ERROR :: InstallThreadProc (line 2381) (hr=0x80070648)
10/14/2010|18:15:45.104 16C0:E00 ERROR :: InstallThreadProc (line 2382): Installation failed. Please review logfile for details and try again.

I found a pretty simple solution to this problem. If you just run the Lync.msi rather than the OCSetupLauncher.exe it seemed to fix my issue.
However, before you can run the Lync.msi you must add a registry entry:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Communicator
DWORD -> UseMSIForLyncInstallation
-> set = 1
Source: http://support.microsoft.com/kb/2477965
I know this is an old post but maybe this will help someone.

10g R2 Client Installation Problem on Windows 2003 64 bit itanium

Hi,
When I click on the setup.exe, i am getting the following..and not getting setup screen
Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The number of files bootstrapped for the jre is 528.
The number of files bootstrapped for the oui is 98.
what might be the problem, is this due to not having unzip software in the server.
Please help me

Just check this link:
Oracle Installer crashes in Windows XP attempting to install 10g database
May be useful...
Amardeep Sidhu
http://www.amardeepsidhu.com

Installation Failing on Windows XP PRo

Trying to install 10G Express with no luck. The installation process just stops and no further messages or prompts are given. Installation fails during the Copying files process and the last message in the dialog box is "Producing Product Information". Here is a snippet from the OracleDatabaseExpressInstall.log
Property(S): OriginalDatabase = C:\WINDOWS\Downloaded Installations\{853C63CA-5594-4874-AAE3-C9B8A0975391}\Oracle Database 10g Express Edition.msi
Property(S): UILevel = 2
Property(S): Preselected = 1
Property(S): ACTION = INSTALL
Property(S): ISStartupEvent = E295978
Property(S): ff9ef67406aa11d5ab9800b0d02332eb = g
Property(S): CLEANUPUNINSTALLROLLBACK = Waiting
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): SOURCEDIR = C:\WINDOWS\Downloaded Installations\{853C63CA-5594-4874-AAE3-C9B8A0975391}\
Property(S): SourcedirProduct = {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
Property(S): ProductToBeRegistered = 1
MSI (s) (50:38) [12:31:31:265]: Note: 1: 1708
MSI (s) (50:38) [12:31:31:265]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
MSI (s) (50:38) [12:31:31:265]: Attempting to delete file C:\WINDOWS\Installer\2b7f2ce.mst
MSI (s) (50:38) [12:31:31:265]: Unable to delete the file. LastError = 32
MSI (s) (50:38) [12:31:31:296]: Cleaning up uninstalled install packages, if any exist
MSI (s) (50:38) [12:31:31:296]: MainEngineThread is returning 1602
MSI (s) (50:C4) [12:31:31:296]: Destroying RemoteAPI object.
MSI (s) (50:10) [12:31:31:296]: Custom Action Manager thread ending.
=== Logging stopped: 11/5/2005 12:31:31 ===
MSI (c) (D0:78) [12:31:31:328]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (D0:78) [12:31:31:328]: MainEngineThread is returning 1602
=== Verbose logging stopped: 11/5/2005 12:31:31 ===

There are a few well known installation issues - in order of likelihood
1) Check that the Windows username you have logged on with does not contain a space (or other special characters such as umlauts etc). The workaround is to create another Windows account without spaces, give that account Administrator privileges, and install using that account.
2) Certain locales have problems. These include Russian, Estonian, English - South Africa, Spanish - Dominican Republic, German - Switzerland, French - Switzerland, Italian - Switzerland. The work around is to set the user locale to something else before the XE installation.
3) If you have the DLL oraociei10.dll in your path you will have problems. Workaround is: Search to see if this file exists on your hard drive. If it does, check to see that the directory that contains it is not in your path. If it is in your path, then remove during the Install. You can add it back to your path after the install, but the SQL Command line provides with Oracle Database XE will not work
In all cases above, deinstall the software using Add/Remove Progam before trying the work around

Iscsitarget installation fails on Windows 2008 R2 server

Dear All
We have windows 2008 Server which is also DC server. I am trying to install iscsitarget utility which I downloaded from Microsoft site. I want to configure the server as iscsi target and map the disk space to another server as disk volume.
The installation fails as it says ' due to some error' there is no explicit entry in the event viewer also. The iscsitarget is version 3.3.
We have installed all the applicable updates from Microsoft updates. ANy alternatives are available?
Shekhar-nsk

Hi,
Follow your description, I also download Microsoft iSCSI Software Target 3.3 on my Windows Server 2008 R2 and
install it. However, it succeed.
àThe installation
fails as it says ' due to some error'
Would you please let me know the complete error message that you can get? Or provide a screenshot of it?
(please hide all protected or private information.)
Meanwhile, would you please let me know where you download the Microsoft iSCSI Software Target 3.3? Please
download it from following link and
perform a clean boot, then check if install successfully in clean boot.
Microsoft iSCSI Software Target 3.3
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Create Client Installer Failing

I have a brand new Mac Mini running Apple Remote Desktop 3.5.1 on Lion 10.7.3 that I am trying to create a custom client installer and right at the end it fails every single time. Saying that "An unexpected error has occured while creating a custom installer. Please try again"
Anyone else getting this issue? at all

Custom Installer Issues with 3.5.2 Client and 3.5.1 Admin
Do you have a computer that is pre ARD client update 3.5.2? if so, you could try making your installer with ARD on that client. And you could report the issue.
And you can always send Feedback about ARD to Apple.
In thread Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3, Eric Shaheen suggested looking in //private/tmp/RemoteDesktopClientInstaller/ to see if ARD actually did create the installer; and if so, to copy it to the desktop. in the same thread gavin0001 said he was able to modify the 3.5.2 client update to make a custom installer.
You might also want to check out thread I can't get Custom Installer to create accounts on Lion. I'm using ARD 3.5.1.

Installation failed with Windows Vista and JDK1.602

Hi All,
Appreciate any help to resolve the following installation error on my Windows Vista system with JDK1.602
Pop-up Error Message:
The installer is unable to run graphical mode. Please check the value of the DISPLAY environment varibale.
Thanks,
CP

JSE8.1 (based on NetBeans 5.0) is not supported on Vista. You may want to consider using the latest NetBeans 5.5.1. (NetBeans is where all future development is planned for).
http://forum.java.sun.com/thread.jspa?threadID=5192837
From the release notes of NB551:
# Issue #85361: NetBeans 5.5 installer does not start on Windows Vista.
    Description: On systems running Windows Vista, the NetBeans 5.5 installer fails to start
and a message suggesting running with the "silent" or "console" flag appears.
    Workaround: To correct this, run the installer on JDK 6.0 build 96 or newer.
    If you encounter further difficulties, disable Compatibility Mode manually. You can do
this by right-clicking the .exe installer file and choosing Properties from the pop-up menu,
then deselecting Compatibility Mode in the Compatibility tab of the File Properties dialog.
Note that if Compatibility Mode was turned on automatically, it is necessary to disable it
for both the current user AND all users. To do so, click the "Show Settings for All Users"
button, then deselect the Compatibility Mode checkbox in the "Compatibility for All Users"
dialog.You can try the same workaround for installing jse8.1, to see if that works. But, it is an older version that is not supported on vista and hence my suggestion to consider a later version of NB.

AIR 2.5.1 sidecar installation failing on Windows 7

My team is attempting to distribute the AIR runtime with our AIR application, and experiencing frequent failures on Windows 7 (64 bit).
The error message is "The application could not be installed. Try installing it again. If the problem persists, contact the application author. Error #0".
I am not seeing this issue on Mac OSX or with previous version of Windows.
This issue is for the sidecar distribution package - I am able to install AIR by itself without incident.
The package is a (zipped) folder to be downloaded from our storefront, containing the application and the most recent sidecar package for Windows distribution (2.5.1.17730).
The typical solution suggested for this type of problem is to scrub your system of any and all AIR files, and reinstall. I have tried this using both Windows Install Clean-up Utilities and CCleaner with no luck. Additionally I have restored the machine I am testing on to factory settings, so no evidence of AIR should exist to begin with.
I am using an admin account, and have tried shutting off UAC.
Curiously I am able to install without a problem from a USB drive or CD! The AIR distribution documentation hints that the sidecar installer is meant to be used with physcial media (CD, DVD, USB, or DMG); is it possible that sidecar installation ONLY works from external devices?
My main concern is NOT getting AIR installed on this particular machine, but releasing our product with the confidence that Windows 7 users will be able to install. Or at the very least, that we can offer a simple solution to users who do need to troubleshoot.
The install log (following) seems to point towards setup.msi being the fail point.
I have also zipped the MSI logs and posted them here, rather than pasting them in the document since there are 3 (long) files.
Any insight would be appreciated - thanks in advance.
[2011-03-10:10:08:21] Runtime Installer begin with version 2.5.1.17730 on Windows 7 x86
[2011-03-10:10:08:21] Commandline is:
[2011-03-10:10:08:21] No installed runtime detected
[2011-03-10:10:08:21] Found sidecar config file at c:\users\bobafett\desktop\build_win_0_8_3\build_win\resources\.airinstall.cfg
[2011-03-10:10:08:21] Read player/BSB.air from sidecar file.
[2011-03-10:10:08:21] Using c:\users\bobafett\desktop\build_win_0_8_3\build_win\resources\player\BSB.air as input file
[2011-03-10:10:08:21] Invoking Application Installer for combined install
[2011-03-10:10:08:21] Launching subprocess with commandline C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources -withRuntime -url file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air
[2011-03-10:10:08:21] Application Installer begin with version 2.5.1.17730 on Windows 7 x86
[2011-03-10:10:08:21] Commandline is: -runtime C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources -withRuntime -url file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air
[2011-03-10:10:08:21] No installed runtime detected
[2011-03-10:10:08:21] Unpackaging file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air to C:\Users\BobaFett\AppData\Local\Temp\flaF69B.tmp
[2011-03-10:10:08:31] Application signature verified
[2011-03-10:10:08:31] Unpackaging/validation complete
[2011-03-10:10:08:35] Converting unpackaged application to a native installation package in C:\Users\BobaFett\AppData\Local\Temp\fla2AA6.tmp
[2011-03-10:10:08:36] Native installation package creation succeeded
[2011-03-10:10:08:36] Launching subprocess with commandline C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air
[2011-03-10:10:08:36] Relaunching with elevation
[2011-03-10:10:08:38] Application Installer begin with version 2.5.1.17730 on Windows 7 x86
[2011-03-10:10:08:38] Commandline is: -stdio \\.\pipe\AIR_9052_0 -runtime C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air
[2011-03-10:10:08:38] No installed runtime detected
[2011-03-10:10:08:38] Unpackaging file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air to C:\Users\BobaFett\AppData\Local\Temp\fla380D.tmp
[2011-03-10:10:08:47] Application signature verified
[2011-03-10:10:08:47] Unpackaging/validation complete
[2011-03-10:10:08:47] Converting unpackaged application to a native installation package in C:\Users\BobaFett\AppData\Local\Temp\fla5B09.tmp
[2011-03-10:10:08:48] Native installation package creation succeeded
[2011-03-10:10:08:48] Starting silent combined runtime and app install.
Installing runtime version 2.5.1.17730.
Installing app com.fablevision.bsb.BSB version 0.8.3 to C:\Program Files (x86) using the source file at file:///c:/users/bobafett/desktop/build_win_0_8_3/build_win/resources/player/BSB.air
[2011-03-10:10:08:48] Installing msi at C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources\setup.msi with guid {46C045BF-2B3F-4BC4-8E4C-00E0CF8BD9DB}
[2011-03-10:10:08:50] Installing msi at C:\Users\BobaFett\AppData\Local\Temp\fla5B09.tmp\setup.msi with guid {683FB515-7AF2-F6FA-6D37-C55E3589129E}
[2011-03-10:10:08:50] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="110" errorID=0]
[2011-03-10:10:08:50] Rolling back install of C:\Users\BobaFett\AppData\Local\Temp\fla5B09.tmp\setup.msi
[2011-03-10:10:08:50] Rolling back install of C:\Users\BobaFett\Desktop\build_win_0_8_3\build_win\resources\setup.msi
[2011-03-10:10:08:52] Rollback complete
[2011-03-10:10:08:52] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="110" errorID=0]
[2011-03-10:10:08:52] Elevated install failed: error 0 110
[2011-03-10:10:08:53] Application Installer end with exit code 7
[2011-03-10:10:09:20] Application Installer end with exit code 7
[2011-03-10:10:09:20] Subprocess app installer failed (7)
[2011-03-10:10:09:20] Runtime Installer end with exit code 7

Hi Jian,
Sorry for the delay.
We're generally a Mac house, so there's only the one Win7 machine that we test on. However we did send the app out for testing, and had similar results on some (but not all) of their Win7 environments.
Where should I send the app?

SQL Server 2008 R2 & 2008 R2 SP1 installation fails in Windows server 2012

Hi All,
I have a strange issue here. I have a Windows server 2012 VM where i want to deploy SQL 2008 R2 Enterprise edition.
When i Run the setup every thing goes fine and during the installation wizard i get this error " The Folder path Program files contains invalid characteristics. I get this error 3 - 4 times during the installation wizard and the installation fails.
Below is the screenshot for the same.
So i checked few articles regarding the compatibility issue and found the below article and upgraded my setup to SQL 2008 R2 SP1 using the below article.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Again i still see the same above errors and with that a new error related to a MOF File.
Below are the contents of the error logs. Can some one assist on this issue.
======================================================
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 13:53:03
End time: 2015-01-15 14:04:29
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0xA60E3551%400xD3BEBD98%401211%401
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: D:\SQLServer2008R2_SP1\x64\setup\
Installation edition: ENTERPRISE
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: E2KLAB\SCOMAC
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: D:\SQLServer2008R2_SP1\SP
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: E2KLAB\SCOMAC
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: E2KLAB\SCOMAC
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr,E2KLAB\SCOMAC,E2KLAB\SCOM Admins
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\sql_common_core_loc_Cpu64_1033_1.log
MSI error description: The folder path 'Program Files' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\SystemConfigurationCheck_Report.htm
Gautam.75801

Hi Alberto,
Still the same issue.
I installed the SQL 2008 R2 without SP1 and changed the service accounts to system account and repaired the .NET using the .NET Repair tool
Also changed the installation directory to D:\ Drive this time. Still same issue.
log file:
===============
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 22:55:37
End time: 2015-01-15 23:07:32
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SQLSysClrTypes_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SQL Server 2008 R2 Datacenter edition for only Windows server 2008 R2\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: D:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SystemConfigurationCheck_Report.htm
Any other suggestion i can try ?
Gautam.75801

Client installation fails with error GetSSLCertificateContext failed with error 0x87d00281

Hi
Site is SCCM 2012 R2
I am pushing SCCM client manually to a Windows Server 2012 client and it is failing with below errors
GetSSLCertificateContext failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMserver.GROUP.COM/CCM_Client/ccmsetup.cab'
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
DownloadFileByWinHTTP failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
CcmSetup failed with error code 0x87d00281 ccmsetup
02/05/2015 12:04:11 AM 6476 (0x194C)
Please advice..

0x87d00281 = "No certificate matching criteria specified"
Have you deployed proper client auth certs to the client?
Can you please post the entire relevant snippet of the log file? Starting with the first error code encountered is meaningless because now we can't see what happened before which is often the root cause of the issue culminating in the error message.
Have you deployed the proper server auth certs to the MP and DP?
Jason | http://blog.configmgrftw.com | @jasonsandys

Client installation fail in windows 7 embedded

Similar Messages

Maybe you are looking for