Client installation: MsiHandler.dll failed to register. HRESULT -2147024769

Due to a company merger, I had to move approx 200 clients from a SCCM 2012 R2 site to a SCCM 2012 SP1 site. I did this by uninstalling all clients, uninstalling the SCCM 2012 R2 site, cleaned up, set up boundaries and AD publishing on the SCCM 2012 SP1 site,
then changing the SCCM SUP GPO to point to the new SUP.
Almost all clients successfully installed the agent and assigned to the new site , expect for 4.
I have tried:
ccmclean.exe
http://sccmclictr.codeplex.com/ (Reset DCOM permissions, Register common DLL's, Reset WMI Repository, Repair Agent)
None of these helped
ccmsetup.log
<![LOG[MSI: Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.]LOG]!><time="12:34:13.529-60" date="11-26-2013" component="ccmsetup" context=""
type="3" thread="3852" file="msiutil.cpp:300">
<![LOG[MSI: Action 12:34:13: Rollback. Rolling back action:]LOG]!><time="12:34:13.639-60" date="11-26-2013" component="ccmsetup" context="" type="0" thread="3852" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
]LOG]!><time="12:34:18.014-60" date="11-26-2013" component="ccmsetup" context="" type="3" thread="3852" file="msiutil.cpp:872">
client.msi.log
CustomAction +MsiHandler_dll.EDFC37A5_EC0F_4170_9D99_8A7F441C1017 returned actual error code -2147024769 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E0:48) [12:34:13:529]: Product: Configuration Manager Client -- Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Error 1904. Module C:\Windows\CCM\MsiHandler.dll failed to register. HRESULT -2147024769. Contact your support personnel.

Hi Jason,
Thank you for your reply.
Correction, there are 3 affected systems. One is a Windows Server 2003 SP2 32-bit, the last two are Windows Server 2008 R2 SP1. All three have the same error.
The msihandler.dll is extracted from the client.msi during installation to the C:\windows\ccm folder. When the installation fails, it rolls back and deletes the CCM folder. But I was able to get a copy of the msihandler.dll file, and tried registering it
manually, which failed with a general error that the specified module could not be found. I also copied the file from a working system, but it still failed.
The Windows app event log reflects the same error during MSI installation as the log files.
The systems does have SCEP from the previous SCCM site installed and running. I uninstalled it on of the the VMs and rebootet, but SCCM client installation still fails with the same error.

Similar Messages

Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895 Problem installing sccm 2012 client

Hi,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on windows 2008 R2 servers.Why StatusAgentProxy.dll fails to register.
<![LOG[MSI: Action 22:08:03: RegisterTypeLibraries. Registering type libraries]LOG]!><time="22:08:03.092-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Action 22:08:03: SelfRegModules. Registering modules]LOG]!><time="22:08:03.827-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[MSI: Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.]LOG]!><time="22:08:03.889-330" date="12-18-2013" component="ccmsetup"
context="" type="3" thread="8096" file="msiutil.cpp:300">
<![LOG[MSI: Action 22:08:03: Rollback. Rolling back action:]LOG]!><time="22:08:03.952-330" date="12-18-2013" component="ccmsetup" context="" type="0" thread="8096" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text:
ExitCode: 1603
Action: SelfRegModules.
ErrorMessages:
Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I've already checked this forum but nothing helped .
Please provide a valid action plan to resolve this issue.
I'd highly appreciate any help.
Thanks and regards
Arsalan

Hi,
Restart those server might be helpful.
After installing the Client manually, you could check the registration of statusagentproxy.dll in that log.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I fix this error: Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel.

I am trying to install iTunes, and get this error: "Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Any ideas on how to fix this error, or get the install to comlete?

*complete...

Importent6.dll fails to register on WTS (Citrix & Windows 2003 64bit)

Hi,
I am trying to install the BOE XI 3.1 client tools on a 64bit Windows 2003 R2 SP2 machine (used as Windows Terminal Server) and I get the message that importent6.dll and exportSDK.dll fail to register during the installation.
Did anyone of you out there had a similar problem so far? Due to the error I cannot get the import wizard installed.
Additionally it would be interesting to know if it is possible to use the import wizard XI 3.1 as a terminal server application in a WTS (64bit) environment.
Regards,
Stratos

Hi,
with regards to the "(x86)" folder i would not recommend installing the BOE Client Tools into that folder. Please create a own Folder (you can for sure do this on drive D:) and install it into the folder. You could create a "Program Files" folder instead of installing it into the "Program Files (x86)" Folder.
About the Errormessage of your .dll`s please check SAP Note - 1205687
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132303536383726
About Windows7. Windows7 is only supported since SP3. Please use the SP3 Fill Build setup routine for the BOE Clients for installing on Windows7.
Regards
-Seb.

CR for VS2010 deployment - crtslv.dll failed to register

I'm still having problems with packaging up the CR for VS2010 library with our applications installation.
I'm using InstallShield 2011 for the installation setup.
I've included the CRRuntime_13_0.msm file. (That is the only MSM file I included, are the others needed also?)
I've included the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86 and the x64 versions.)
I have tried to do a test install on both a 64bit and a 32bit Windows 7 computer and it keeps giving me the crtslv.dll failed to register error on both computers.
Error 1904.Module C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crtslv.dll failed to register. HRESULT -2147010895. Contact your support personnel.
I thought it might just be due to the 32 bit MSM causing the problem on the 64bit computer, but I can't even get it to install on a 32bit computer. (On the 32bit computer install, I even removed the x64 bit version of the MS C++ 2005 Redistributable from the installation setup just to make sure it wasn't causing a problem).
I have even tried having my Install Shield setup 'Chain' the CRRuntime_32bit_13_0.msi file to my main installation (not using the Merge module). Even when that runs, it produces the same crtslv.dll failed to register again.
BUT, if I run the CRRuntime_32bit_13_0.msi manually on the computer it installs correctly. (I even tried using the same /qf parameters that InstallShield is using on it and it also worked OK that way.) So I can't figure out how to get it to run in conjunction with my InstallShield installation.
Can anyone give me any suggestions?
Mike...

I finally got past this issue and got things to install, with a few hackish work-arounds.
First the CR13 msm redistributable appears to requre the 32 bit version of "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security" that you'll read about in every post. On 64 bit machines I found that even when it was installed,I would still get a crtslv.dll failed to register message, followed several other dlls not registering. Once I installed the 32 bit version on the 64 bit OS, the crystal 13 redistibutable installed fine everytime. I did this on several 64 bit VMs all running Server 2003,XP, and Windows 7. It ran fine every time.
The problem you'll face is how do you install the 32 bit version of this ATL security pack on a 64 bit machine. You may be able to download and run the 32 bit version from Microsoft's site with the link Ludek has posted. That wouldn't work for me because I had to distribute it with my software so I used the prerequisite available for InstallShield. The prereq however is designed to only run on 32 bit machines, so I edited it in InstallShield and modifed the conditions to allow it to run on both 32 & 64 bit operating systems.
The next problem encountered is that this 32 bit prereq getting installed on a 64 bit machine will result in an error being returned that the installation appears to have failed. Well it is a 32 bit installation not intended for a 64 bit OS and we're not supposed to do that. I did say hackish work-around. The 32 & 64 bit files are installed to different directories and the 64 bit version does not get overwritten. If you check the event viewer you'll see a message logged in that the installation of the ATL prereq completed sucessfully. So I modified the behavior of the prereq in InstallShield to "continue the setup if the condition still indicates it is required after completion". Now it runs without error and everything for Crystal installs sucessfully.
The final problem was also with the pre-requisite. The code determines if it is already installed by looking for the file:
[WindowsFolder]\WinSxS\x86_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_473666fd\ATL80.dll
I found on some machines it was previousy installed to:
[WindowsFolder]\WinSxS\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\
This results in the prereq being required every time because the file it's checkig for is not found. Furthermore, it fails every time, most likely because it's alreday installed and not supposed to be installed again. So once again, I modified the prereq conditios in InstallShield and made it look for the file in both locations to determine if it was installed.
I haven't seen any problems since with either the Crystal runtime or the ATL update. Happy day.
The part I stll don't understand is that SAP says they can't distribute the ATL update in their MSM because of licensing issues, but we can sell our software and distribute it freely. Microsoft even create the prereq so that we could distribute it freely. So why can't SAP distribute the required files for their runtime? A lot of people on these threads have wasted a lot of time and money on this issue. Ludek provides great support but maybe this issue needs to be investigated further by development.

DTSAGENT.DLL failed to register when trying to install CRRuntime_32bit_13_0_7

Hello together,
maybe some can help me with an installing issue with CRRuntime_32bit_13_0_7.
When i try to run the setup i get the error:
Error 1904. Module C:\Program Files\SAP BusinessObjects\Crystal
Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dtsagent.dll failed to register.
HRESULT -1073741819. Contact your support personnel.
I found something following the link: http://scn.sap.com/thread/1948999 but it didn´t really fix my problem. I think it´s a problem with the constellation of McAfee that is also using the dtsagent.dll
I welcome each comment, feedback and each suggestion which could help me to fix this problem.
Thanks
Chris

Hi Chris,
This issue has been discussed many times before. Please use the top right corner search box.
I searched for "error, 1904, install, crystal, visual studio" keywords and here are the results.
http://search.sap.com/ui/scn#query=error%2C+1904%2C+install%2C+crystal%2C+visual+studio&startindex=1&filter=scm_a_site%28scm_v_Site11%29&filter=scm_a_modDate%28*%29&timeScope=all
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Getting "querypanel.dll failed to register" on Windows 7 32 bit machine

Trying to move from CR 2008 SP2 to CR 2008 SP3.
For the CR 2008 SP2 version of our application, which runs our Crystal .rpt files, we used Visual Studio 2005. we then created a Visual Studio .msi file, using the merge module (CRRuntime_12_2), to install this application on a target machine that had .NET Framework 2.0 and VC++ Redistributable 2005 SP1 installed. If these two latter prerequisites were not installed, our install would fail because the CEReportSource.dll could not be registered.
After installing CR SP3 on my development machine, we created a new Visual Studio project, again using Visual Studio 2005. I used CRRuntime_12_3 as the merge module and everything else was the same.
I was getting this same error message "CEReportSource.dll failed to register" when I attempt to install the SP3 version of the app on the very same machine on which I previously successfully installed the SP2 version. I found an answer in these forums to install Microsoft Visual C++ 2005 SP1 update. Even this did not help. When I installed MS VC++ 2008 Redistributable - x86 9.0.30729.17, finally the problem of "CEReportSource.dll failed to register" went away on XP and Vista machines.
Now I am trying to install my program on Windos 7 32 bit machine and I get "querypanel.dll failed to register".
Q1. By installing S VC++ 2008 Redistributable - x86 9.0.30729.17, the problem of "CEReportSource.dll failed to register" did not occur. Is this the right thing to do. I am not sure why VC++ 2005 SP1 did not fix the issue.
Q2.What do we need in order to prevent "querypanel.dll failed to register" error on Windows 7 32 bit machine.
Thanks for your time.

Moved to .NET SDK forum.
Search here, lots of info on distribution. Likely caused by MS updated the C++ runtime to include security updates. Go to MS's site and download the latest C++ distribution package with enhanced security.
If you use the CR MSI package rather than the Merge Modules it should work.
Thank you
Don
Edited by: Don Williams on Nov 9, 2010 2:16 PM

BR0999E Loading of SQL client library orasql9.dll failed

Hi basis experts,
My SAP system is ECC 5.0 and the RDBMS is Oracle 10.2.0.2.0
I want to use transaction DB13 to make database backups, but it sendme
an error because it can´t connect to the database.
I try to use brtools to make a backup and sendme the error:
BR1001I BRSPACE 6.40 (39)
BR1002I Start of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0999E Loading of SQL client library orasql9.dll failed - please check
Oracle configuration
BR0310E Connect to database instance DES failed
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: sdvzljqc.dbw 2007-08-23 09.47.42
BR0280I BRSPACE time stamp: 2007-08-23 09.47.42
BR1007I BRSPACE terminated with errors
BR0292I Execution of BRSPACE finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them
or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2007-08-23 09.47.43
when I try to use any tool of brtools it sendme the same error all the
time.
I read that maybe I had an incorrect version of brtools, but in market
place I only found DBATOOLS Package for Oracle 9.2.x, this version
will work correctly with my Oracle 10.2.0.2.0????
How can I solve this problem??? Please helpme
Thanks in advance
Tania Rosas

ok,
go get BRTOOLS 7.00, you need that version to use brtools on Oracle 10g databases.
go at http://service.sap.com
entry by application group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
choose proper kernel version (32 or 64-bit unicode or not)
Message was edited by:
Eric Brunelle

Flash player installs, Removed Chrome, Failed to register.

I have a couple of machines that will download the flash player update, says it installed, then I go to another web site and it tells me to install again.
So I have uninstalled and re installed the latest flash player. Then somewhere on these forums, I found that Google Chrome was causing the issues. I uninstall Google Chrome and now
it says that it "Failed to Register" when installing.
I have tried the solution here. http://forums.adobe.com/thread/885448 Did not work. I tried http://forums.adobe.com/thread/461168 Did not work (That works great for xp.)
Win 7 64
Internet Explorer 9
Flash Player 11.x
Also I get the same problems in Vista.
It works in Chrome, But that is not the point. The user wants IE9 to work.

Hi,
For resolving these issues please do the following
Open the below link and download the Adobe flash player uninstaller.
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows. html
Please make sure you the Administrator of the System. Run this uninstaller and restart your system, install latest version of Adobe flash player from www.adobe.com.
- Devendra

Client Installation Program Creator fails

I just bought the latest release of Apple Remote and was planning to start installing clients on our 50 Macs. Unfortunatelly, when asked to save the client installation program, I get the same message:
Let me translate : "An error occured while trying to access the required components"
Just to be sure, I followed the following steps and reinstalled after : Uninstall or disable Apple Remote Desktop - Assistance Apple
Seriously? A freshly installed so called pro software with such a bug ? Thanks for helping folks !!

Either way, if you had the original CD or the downloaded zip file it works exactly just the same, unless you downloaded another client version.
Was it the regular aix client (10gr2_aix5l64_client.cpio.gz) or the instant cliet for aix (http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/aix5lsoft.html)
On the first case, just unzip and cpio the file.
~ Madrid.

Error 1904. Module C:\Windows\SysWOW64\CCM\x64\ccmcore.dll failed to register. HRESULT -2147024703. Contact your support personnel.

I'm getting this error while installing client on server 2008 Sp1 box.
Steps i tried:
1.I did try manually registering oringinally but when the client fails to install, it removes all the source files including the ccmcore.dll. So, ccmcore.dll doesn't reside on the system after failing to install the client or at least not that
I can see.
2. I have tried timing it just right so that my "regsvr32 ccmcore.dll" is run during the install process while the file is in the CCM folder but that didnt work either.
3. I had manually created the directory CCM\x64\ccmcore.dll and copied the file from a working client and try to register but it gave me an error " Failed to load .dll"
4. i have tried uninstalling the client from ccmclean as well but no luck.
I'm running SCCM 2007 Sp2 native mode and trying to manaully install the client.
Please help?

*complete...

Client installation on AIX fails

Hi,
I'm in a process of install 9.2 Client on AIX box.
OUI : on the page "File locations" , "Source..."
looking for products.jar file - not found!!!
products.jar is nowhere to locate..
Any suggestions please?
Thx,
Dobby

Either way, if you had the original CD or the downloaded zip file it works exactly just the same, unless you downloaded another client version.
Was it the regular aix client (10gr2_aix5l64_client.cpio.gz) or the instant cliet for aix (http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/aix5lsoft.html)
On the first case, just unzip and cpio the file.
~ Madrid.

Error 1905 module C:\itunes\ITDetector.ocx faile to register HRESULT 214722

Had ipod for 7days not in use. I've bought a new one and had to update my itunes, removed old one, but it kept telling me that it could detect my old version. Anyway tried to download and the above message came up.
strangly I now have itunes my computer and now busy sorting my library out, but what does this message mean.

I also have this problem. the error 1905 comes up and will not allow the update of itunes7. I have itnes4 now for my ipod mini. it will not upgrade and seems others have the same problem. Whats up and how do we get this nano to work?? Help!!!

Fail to Register Error - Desktop Manager

Hi,
Looking for some help here. Tryping to reinstall Blackberry Desktop Manager. Keep receiving the following errors when registering modules the the install 'hangs'. tried loading from the web as well as the CD same result.
Following is common on all errors:
C:\program Files\Research In Motion\Blackberry.....
\IS71 Connectors\ISGroupWise6.5.x\gw.dll
\IS71 Connectors\ISGroupWise6.5.x\gwAPI.dll
\IS71 Desktop Setup\DesktopSetup_pb.dll
\IS71 Action Engine\SyncAE_pb.dll
Failed to Register
HRESULT -2147024891
Not a computer buff by any means but carried out the 'clean installation' instructions with same result.
Appriciate anyones help on this.

Hi and Welcome to the forums!
From you post, I cannot tell if you've done all of this or not, so I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
http://na.blackberry.com/eng/services/desktop/
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Crystal Reports Installation Issue (Error 1904/ HRESULT -2147024769)

Hi,
While installing Crystal Reports 2008 -trial version on Windows-xp I am getting the following error:
"Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Integration Kit for SAP has not yet been installed. But Business Objects XI3.1 Client Tools are installed.
Crystal Reports version is 12.0.0.86.
Is it an compatibility issue or other problem? What is the resolution? Are there any Fix Pack available? Any alternative approach that works?
Any suggestions on this are welcome.
Regards,
Amogh

Hello,
Download Crystal Reports 3.1. It should be version 12.1.0.xxx. It may be the order you are installing also, Install CR first and then the other parts.
1904 is a MSIExec error code. Typically it's due to outdated Microsoft installer or permissions and/or network speed or.... Be sure you are logged in as the local PC administrator or have the same rights as. Copy the installer to your local hard drive and run the setup.exe by right clicking on it and selecting Run as Administrator...
Here's a link for the full build of SP1: https://smpdl.sap-ag.de/~sapidp/012002523100006556612009E/cr2008v1win_rf.exe
Thank you
Don

Client installation: MsiHandler.dll failed to register. HRESULT -2147024769

Similar Messages

Maybe you are looking for