Client is not known to the message server
Hi,
I've search SAP Notes but could not find any answer to my problem. I am running 4.7 (620) on Ora 9i, Windows 2000 Advanced Server and kernel 155. We have 2 application servers and one DB server.
I get an error message every 5 minutes in the system log reading:-
Client PRD01PRD_00 is not known to the message server
Client PRD02PRD_00 is not known to the message server
This message translates in dev_w0 as follows:-
ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 16132]
ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c 6903]
Please advise on a solution.
Dear Ferrandi,
this is an attempt to send an ADM message to a given instance. The problem is that the message server is not aware of such an instance. If you say that this happens every 5 minutes, it will be some kind of automatic job trying to speak to an instance not available in the system. I would suggest that you reset the trace files, then switch the trace level of the first three dialog work processes to 2 (components taskhandler, abap proc., and scrn. proc.) and then set the profile parameters
rdisp/TRACE_LOGGING = on, 10m
rdisp/TRACE_PATTERN_0 = ERROR => ThSysAdmMesg: ThAdmSend
so that tracing will stop as soon as the problem happens again. Do post the work process trace file that has the error message here or send it via mail to me so that I can check which report is being run.
Best Regards,
Tim
Similar Messages
-
System went down after this message Client is not known to the mess server
Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
<b>Initially i got following error message 2 times in the system log reading:-</b>
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
<b>After above message I got an information message Continuously 30 minutes in the system log reading:-</b>
Client cinsapp1_PRI_00 is not known to the message serve
<b>Then stoped the workproccess one by one</b>
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
<b>Finally R/3 system was stoped.</b>
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
RameshHi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan -
Client x.x.x.x is not known to the message server
Hi,
One of my customers is getting strange messages in the Development system of their SRM landscape. The messages are:
Client x.x.x.x is not known to the message server
Where x.x.x.x is the IP address of a workstation. The messages occur a few times per day, and they are always grouped. There are always about 5 identical messages with the same IP, but the next occurence may be from a different IP. Also, the QAS and PRD systems are configured identically (as far as I know) but they do not have this message.
I do not understand why this message occurs. The "clients" of a message server are it's application servers, not the connected workstations. The users/developers are not doing anything special at this time. There are no dumps, the messages only appear in ST22.
At another forum it was suggested that the problem may be with the printers in SPAD (there was one type F printer which I chaged to type G and eventually removed, but no change) or with the operation modes. I was also asked to check the logon groups. Everything seems normal there too.
Does anyone have any idea where to look?
Thanks
MischaCheck this SAP NOTE ...The R/3 System relies on the operation system to resolve names and IP-addresses of other hosts (for example, host names of other Application Servers in the same R/3 system or IP-addresses of client computers that access the system).
Try adding the host entries of R/3 system(Messager server) on Client computer and check if it works.
Note 124562 - Hostname resolution problems (DNS timeouts) -
Client PRD01_PRD_00 is not known to the message server
Hi,
I get a lot of user disconnects (SM21) and update deactivation (SM13). From the system log I get the following error. Are they related? How can I fix this?
Client PRD01_PRD_00 is not known to the message server
Client PRD02_PRD_00 is not known to the message server
Transaction Canceled BT 510 ( )
Perform rollback
Operating system call recv failed (error no. 10054)
Connection to user 24070 (BUCHANR ), terminal 112 (MB02159PC ) lost
Please adviseHi Ferrari,
I have the same problem here.
Can you tell me how solution do you apply?
Best regards,
Marcelo Moraes -
Dispatcher Died after not able to reach message server
Hi Gurus,
My Dispatcher is not able to connect to MS. Please note I am using windows/oracle. After som time disp+work died. Here I am posting latest dev_disp log. Please suggest.
regards-JASWANT
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC5
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 3096
Mon Apr 27 11:01:58 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3096) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 27 11:02:03 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >hpnwecc_EC5_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05970040, size: 4930904)
DpShMCreate: allocated sys_adm at 05970040
DpShMCreate: allocated wp_adm at 05972090
DpShMCreate: allocated tm_adm_list at 05976980
DpShMCreate: allocated tm_adm at 059769B0
DpShMCreate: allocated wp_ca_adm at 05D894B0
DpShMCreate: allocated appc_ca_adm at 05D8F270
DpShMCreate: allocated comm_adm at 05D911B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05E12070
DpShMCreate: allocated gw_adm at 05E120B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05E120E0
DpShMCreate: allocated wall_adm at 05E120E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Mon Apr 27 11:02:04 2009
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 755 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5940
argv[0] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC5
argv[7] = -DSAPMYNAME=hpnwecc_EC5_00
argv[8] = -DSAPPROFILE=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
Continued...........continued
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1720]
ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1721]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Mon Apr 27 11:02:07 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 3 / sock 1500
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3319) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5940)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Apr 27 11:02:44 2009
ERROR => DpHdlDeadWp: W0 (pid 5680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 4888) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4208) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 444) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 5312) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4880) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W6 (pid 6120) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W7 (pid 2604) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W8 (pid 4688) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2636) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 6012) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W11 (pid 2428) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W12 (pid 5256) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:54 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 27 05:32:54 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5680 Ended no 1 0 0
1 DIA 4888 Ended no 1 0 0
2 DIA 4208 Ended no 1 0 0
3 DIA 444 Ended no 1 0 0
4 DIA 5312 Ended no 1 0 0
5 DIA 4880 Ended no 1 0 0
6 UPD 6120 Ended no 1 0 0
7 ENQ 2604 Ended no 1 0 0
8 BTC 4688 Ended no 1 0 0
9 BTC 2636 Ended no 1 0 0
10 BTC 6012 Ended no 1 0 0
11 SPO 2428 Ended no 1 0 0
12 UP2 5256 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 27 05:32:54 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Mon Apr 27 05:32:54 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , tr-12-05, 11:02:30, M0, W-1, , 1/0
RM-T14, U15, , tr-12-08, 11:02:31, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Apr 27 05:32:54 2009
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:59 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >hpnwecc_EC5_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4884) (SOFT_KILL)
Stop icman
killing process (4708) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1500 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1500 (pos=2)
SiSelNRemove: removed sock 1500
NiSelIRemove: removed hdl 3
DpDelSocketInfo: del info for socket 3 (type=3)
NiICloseHandle: shutdown and close hdl 3 / sock 1500
NiBufIClose: clear extension for hdl 3
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 187 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 14 elems in tmadm_inuse_list
send SHUTDOWN to REM TM 14
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T14
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T14 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1452 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1452
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1452
NiBufIClose: clear extension for hdl 5
dp_tm_adm[14].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 14
DpListInsert: insert elem 14 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 14 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4884 HANDLE:1568)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:00 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4884 HANDLE:1568)
wait for end of icman
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:01 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:02 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:03 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:04 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:05 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:06 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4708 HANDLE:1572)
[DpProcDied] Process died (PID:5940 HANDLE:1552)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3096) [dpxxdisp.c 10421]
Good Bye ..... -
Server 2008 TS - some client could not connect to the server
Hi guys,
I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
"Because of a security error, the client could not connect to the remote computer.
Very that you are logged on the network, and then try connecting again."
I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
http://support.microsoft.com/kb/2477176/hu
(These scanners can connecto to another Terminal Server.)
Is it client or server-side issue?
Have you another idee?
Regards,
GaborHi,
Thank you for posting in Windows Server Forum.
Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
You can also refer below article for additional information.
How to resolve the issue “Remote Desktop Disconnected” or “Unable to
Connect to Remote Desktop (Terminal Server)”
Hope it helps!
Thanks.
Dharmesh Solanki -
I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideasAccessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes -
try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumartry
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif -
I have dial up - once I connect to the internet, I get the message server not found and am unable to go anywhere on the internet. This started trying to load my banks online site and started about a week ago. I've tried freeing popup blocker, gone through the settings with a bank IT specialist, tried to us IE which has resulted in a request for a cable and now no access to any website. Any suggestions appreciated. Thanks
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.<br />
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
Developer Studio:Exception:The message server did not respond within 60 sec
Folks,
I am getting this error in Developer Studio ( J2EE Engine Preference) , Can anyone please tell me what is the issue.
Exception: The message server did not respond within 60 sec.Please check if the message server is running and if the socket connection has been established
Thanks,
ManishIf the system information page is showing 3900, you should use 3900 in your studio settings.
39xx is the new default for 2004s. It was 36xx with 2004. And xx is the instance number.
Regards,
Christophe
Message was edited by:
Christophe Benoit -
This field name is not known. on the server
I have an issue using RPT file to generate a report using my .NET web app on the server, locally the report is generated fine, but on the server it's giving me the error "The field name is not known":
[COMException (0x80041019): This field name is not known.
Details: errorKind
Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
Error in formula Object_Visibility:
'{visa_clients.addon1} = ""'
This field name is not known.
Details: errorKind]
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +362
[FormulaException: This field name is not known.
Details: errorKind
Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
Error in formula Object_Visibility:
'{visa_clients.addon1} = ""'
This field name is not known.
The line mentioned above causing the error, is a script on crystal report to suppress the field if this condition is met:
{visa_clients.addon1} = ""
My PC is running Crystal Report version 11, however the Crystal Report runtime on the server running the version 10.5.1.0
Both locally and on the server, i'm using the same datasource. Even locally i'm connecting the database on the Server.
I would appreciate your help.It seems i'm posting in the wrong forum, please guide where can I post this question, to find someone who could have experience with Visual Studio and Crystal Report.
I have 3 RPT files on my project, 2 generated successfully, only one is failing, because i'm using a script on the RPT file to suppress a field if the value is null or empty.
So the statement of Crystal Report version 11.x not working with SQL Server 2012 is totally out of the subject.
here is my code, for someone who knows how to read it:
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
System.IO.DirectoryInfo TemplatesPath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/rptTemplates"));
string templateFile = TemplatesPath + "/" + "FormListAddons.rpt";
rpt.Load(templateFile);
var table = dbmgr.listClients(in_group_id);
rpt.SetDataSource(table);
System.IO.DirectoryInfo FilePath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/UserGeneratedReports"));
string FileName = "FormList_" + in_group_id.ToString() + ".pdf";
if (System.IO.File.Exists(FilePath + "/" + FileName))
System.IO.File.Delete(FilePath + "/" + FileName);
rpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, FilePath + "/" + FileName);
rpt.Dispose();
rpt.Close(); -
My iphone does not connect to my email provider and fetch my email. I have been getting emall ok previously, this occurred when I changed my password on my email account. I have "set up a new account" but get the message "server is unavailable". I have tried several things but to no avail. Does anyone have the solution?
ThanksDid you ever fix this problem? The same thing happened when I just changed my kids passwords and now can't access their mail on their iPods or my iPad but I use the same email provider and mine is fine however I did not change my password. If you fixed it how did you?
-
I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.
Have you tried the following troubleshooting document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK. -
I am trying to download a new ebook that I bought on ebook.de (already did it before and never had problem) and this error message appears "ADE could not connect to the obtention server. Make sure you are connected to internet". I am connected to internet and my connection is quite good... I have no idea how to fix this problem. Can someone help me?
Hello,
Quickly you can do a check.
Open your browser
Type URL: https://adeactivate.adobe.com/adept/Status
Press enter
You should see something like:
If it says "UP", this indicates ADE will be able to contact activation server.
If not, then, maybe firewall is causing you this issue.
Thanks -
"Digital Editions could not connect to the fulfillment server. Please check your internet connection." This is the message I get, yet my internet connection is good. Help!
we dont have a answer
Maybe you are looking for
-
How can I insert clips in order?
I am using 5.0.2. I have made an album of the photos that I want in my movie, and put them in the order I want. I would like to put in about 9 at a time, but iMovie does not keep them in the order I have. As an example-In iMovie I select photos 01,02
-
Hi All, I am facing an issue in debugging a BSP application. I placed an external break point in oncreate, oninitialization and oninputprocessing event but its not taking me to the break point. I have even tried with having some BREAK-POINT hard code
-
Audio Drift when importing VHS Tapes-Do I need a Canopus ADVC 300
Embarking on the daunting task of importing/editting >100 2hr VHS tapes, and want to get the best results for my efforts. I pop a tape into a VCR connected via S-Video (video) and RCA (audio) cables to a Sony DVMC-DA1 AD converter, and from there to
-
Live View: Augmented Reality browser
There is a new application available over on beta labs. It's basically the same as Layar except it's faster, simpler and less cluttered. http://betalabs.nokia.com/apps/nokia-live-view Cheers. Ray
-
Hi I have installed oracle software 10.2.0 on AIX box software was installed as per the document i have created oracle user , oinstall, dba group and gave the proper permission to oracle user , oracle dir and oradata dir Now i m trying to create a da