Client isolation - Apple Airplay
hello there!
Wonder if you guys can help me?
Currently running 7.4 on WLC 5508. Wireless is working perfectly one one subnet and SSID throughout the building.
However, how can I enable client isolation?
I have enabled P2P Blocking action = Drop
But when I check Apple Airplay I can still see Apple TVs around the building? How can I isolate the airplay to the AP it is connected?
I have tried to going into Controller/Multicast/ disabled Global Multicast Mode - which does block Airplay but I cannot access Airplay where the Apple TV is in the same room as the AP.
Any ideas?
Cheers
Well, I have an ipad hooked up to an apple tv and an airport extreme, and the apple tv is linked to my 10 year old amplifier with optical cable, and it all sounds great.
I spent $25 on itunes match and how have all my music streaming to my appletv-amplifier in very high quality.
I don't have any problems, and I use the apple tv to do the streaming as itunes match on an ipad does a forced download on an ipad.
When my sainted amplifier dies I will probably invest in a Pioneer vsx-822k.( Ever look at a piece of electronics and, at the same time, love it for its loyal hardiness and wish it would start sputtering or something)?
But I don't have that so can only say with certainty that appletv to an amplifier works well.
And it looks like Mountain Lion will let you use airplay directly from your computer. Not sure how that will work with music.
Hugh
Similar Messages
-
Client isolation and the Bonjour gateway on WLC 7.4.1
Hi,
I am considering upgrading our 5508 WLCs to version 7.4.1 to take advantage of the Bonjour gateway. What I want to do is allow clients on our guest wireless network to access things like the Apple TV in our conference rooms. My intention would be to have the Apple TVs on a separate vlan. Obviously, the Bonjour gateway would allow for access between these 2 networks. The question I have is this. If I have client isolation turned on my guest wireless network, is it still possible for these devices to access Apple TVs on another network?
Any and all information is appreciated!
Thanks!If the Apple TV on the wireless lan , that wont work.
here is the reference:
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0080bb1d7c.shtml
please make sure to rate correct answers -
How can I get Apple Airplay to work on a Yamaha Reciever from a 2010 21.5 iMac
I have a brand new Yamaha Reciever.
Apple airplay is an option with
this newer stereo reciever.
From what I know my 2010 iMac
is outdated for this purpose. I don't
have the cash for Apple Tv. I'd like
to be able to stream my iTunes
into my Reciever without connecting
my iPhone to the device. One
of the key selling points was
Apple airplay. Yet, my computer/
reciever looks like it's
unable to detect each other. I could
use some expert advice at the
moment?Sorry, but the Yamaha Receiver is not conpatible with AirPlay.
iOS: Use AirPlay to wirelessly stream content -
Instant Client for Apple MAC OS X on Intel x86 Available on OTN
10.2.0.4 Database Client (+ Instant Client) for Apple MAC OS X on Intel x86 is now available for download on OTN: http://www.oracle.com/technology/software/tech/oci/instantclient/
Kuassi http://db360.blogspot.comFWIW, the 10.2.0.4 releases for Win 32 and Linux x86 are also now available.
-- cj -
Porque no se facilita la contraseña del EFI a los clientes de apple??????
I have never encountered any such password.
What are you trying to accomplish? -
Can you get catch up tv with apple airplay?
Can you get catch up tv with apple airplay?
Welcome to the Apple community.
Many TV stations have airplay enabled app or website that allows you to view its content on the Apple TV. Not all do, and where they don't you can usually work around this by using airplay mirroring. There are a small number of TV stations that block airplay mirroring. -
There is an issue with the Home Hub 3 that prevents a continuous connection with Apple AirPlay. I bought my girlfriend a speaker for her birthday, at which point she was on Orange with a 5 year old wireless router, and the AirPlay worked perfectly. She switched to BT as Orange did not support a VPN connection and now AirPlay continually drops out. By resetting the router the connection returns so based on these two points, and the numerous reports on the internet, the cause is clearly the Home Hub 3.
Has anyone who has experienced this problem actually found a solution other than buying a new router to replace the sub-standard hardware offered by BT?
N.B. I have gone over the other posts on this forum and done a factory reset which then gave me the option to turn off WPS as for some reason this was missing, turned off smart Channel and amended security to WPA only.
Much appreciate any help/adviceJaylow wrote:
Got one for the speaker when it reconnected after the last reset (about 20mins ago)
Right, see if you get an event each time it reconnects. The DHCP renew issue is a known problem with the HH3.
Also, are there any network configuration setting that you can change on the speaker?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
No Apple Airplay after restore point :0{
i had to restore my g7 to an earlier time due to a spyware problem. Restore point worked perfect....but now my Apple Airplay does not stream. The laptop recognizes the Airport Express and allows wireless internet connection, but no Airplay...
thanx, and wooohooo my first post !!! :0)For those of you that don't have a second computer, you can try to clear out (backup and move) all the iphone backup folders. This way it's almost like being at a new computer because a backup wasn't done before. Furthermore, you can isolate which encrypted backup files contain sms, which contain contacts, etc. So you can do a free restore with only certain files restored. More info on where to find these files I've wrote up a whole thing here:
http://discussions.apple.com/thread.jspa?threadID=1654164&tstart=15 -
Revert Clients to Apple Server
I have a number of clients that used to use Software Update on a server here which is not long gone. How do i revert these back to the Apple servers so they can get software updates? I've found the plist files but cannot find the URL that apple uses by default.
Or do i just delete the software update plist files???
--TimDownload and use this software, or run 'defaults delete com.apple.softwareupdate CatalogURL' without the quote marks in the Terminal, which is in the /Applications/Utilities/ folder.
(22836) -
B1 Client on Apple Macintosh Desktop
Apple Macintosh provides a tool called Parallel Desktop to allow Macintosh user to install and run Microsoft windows applications.
For users with Apple Macintosh desktops, are there any issues for SAP Business One to run on this Parallel Desktop software?
Thanks.Hi,
As per norms of SAP,it is not supported.Refer this link on [B1 client platform|https://websmp208.sap-ag.de/~sapidb/011000358700001241092005/]
The Parallel Desktop, it was the first software suite to bring hardware virtualization mainstream to Macintosh computers with Intel processors.
Even iin the release 4.0,it has it has known limitations as of November 2008, include:
1.Using Windows Vista's Boot Camp partition results in needing to reactivate Windows.
2.Windows Aero on Windows Vista and Windows 7 is not supported,as the Parallels driver does not support Windows Display Driver Model (prerequisite for Aero).
3.There is no OpenGL graphics acceleration or integrated window function for Linux.
3.Pressure sensitivity is not supported for all models of Wacom graphics tablets.
Hope this is helpful! -
Lync 2013 IM from full Lync client to Apple Iphone 4S
Hi,
We are running Lync 2013 and Lync 2010 in coexistence. When sending an IM from a fully Lync client (Lync 2013 homed user) to an Apple Iphone 4S with the latest Lync 2013 mobile app installed and the user chooses not to read the notification or misses it
an error is shown on the senders Lync window - is this by design or an error?
This message may not have been sent to Lyncuser1 because the server timed out.
On the server monitoring reports the following events are logged for client and server:
24116; Component="RTCC/5.0.0.0_UCWA/5.0.0.0 iPadLync/5.4.1485.0000 (iPad iPhone
OS 7.0.3)"; Reason="The request was rejected because the application did not
respond to the incoming call and it was not the preferred endpoint.";
1
13004
FEservbeer.domain.com.net
InboundRouting
13004; reason="Request was
proxied to one or more registered endpoints"; source="FEserver.domain.com";
Count="2"; appName="InboundRouting"
Please advise f this is something we should be concerned about as the message does get received by the iphone user but the sender gets a message that indicates it may not have reached the iphone user.
Cheers
DHi,
Did the issue happen both clients internal the company or external the company?
Please check if the both of the tested users could see the presence of each other normally.
Please try to log off Lync Mobile client and then log back on again to test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Interactive Reporting Web Client on Apple Mac: Intelligence iServer?
Hi All,
I just installed EPM release 11.1.1.1 along with Interactive Reporting. We were led to believe that Macintosh was supported as long as FireFox was used as a browser. Everything seems to work fine except when I try to create a new Interactive Reporting Web Client document, I get the error message:
Viewing and analysis with Interactive Reporting Web Client is supported in Windows only.
For other platforms, use the Intelligence iServer option: ihtml servlet icon
Contact your system administrator if this option is not available.
I cannot seem to find much information on this "Intelligence iServer". Does this exist and will it let FireFox clients use Interactive Reporting Web Client? Is it an option that can be installed on the server?
Thanks for
any insight.
RandyHi,
I have some knowledge about this Intelligence iServer, which I would like to share with you.
In Version 8(HPSu 8.5), Hyperion has 5 servers, which we need to install-
Hyperion Foundation server
Hyperion SQR server
Hyperion SQR iserver
Hyperion Intelligence Server
Hyperion Intelligence iserver
Each server had its own specific work and foundation server was base of all other servers.
Hyperion Intelligence iserver supports the user to access the BQY in ihtml client. It helps user to perform some feature (like drill down-drill up) in html view.
Later Hyperion Came with System 9 and integrated the entire server into a single bundle (internally I don't know what happened).
This EPM 111.1.1 is Hyperion System 9.5 only.
I would like to advice you to log this case to Oracle support (metalink3) and ask more information about this.
It may be that, EPM 11 doesn't support Web Client in Macintosh environment
Thanks & Regards,
Mohit Jain -
Outlook 2007 client accessing Apple email account
Hi,
Can anyone help me here. I have users who have to have Outlook 2007 as their mail clinet. But we use a Mac mail server to host their accounts. All clients that use Macs have no issue (Realise Mac is best).
This issue starts when try to use Outlook 2007 on a pc. It keeps asking for the password. I know I have set up the correct SMTP, Incoming Mail server and both ports as all other mac devices and computers access externally ok! Also SSL is selected.
Bit vaugue I know but any ideas?
Cheers
ArielCTHi,
Before we go further, I'd like to confirm if the affected user has two mailboxes and the meaning of former user.
And for the strange OST file issue, I recommend you try to delete all OST files and recreate the profile to have a test.
Thanks,
Angela Shi
TechNet Community Support -
Error -15006. Apple airplay doesn't work.
Hi, i am trying to play music from my macbook pro to apple tv through air play but it comes up with "error -15006". What do i do to solve this?
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
Amazon prime video airplay blocked on all Apple devices, why?
Why is it that Apple cannot figure out how to come to an agreement with the largest online book and video supplier in regards to making apple airplay available for Amazon prime video account holders. Amazon Prime is a pretty cool technology but politics and money are blocking Apple users from being able to use this technology. You can hear the movie but there is no picture. Nothing is wrong, Amazon has just blocked all Apple users from what I can tell. It does seem a bit hush,hush for some reason. I love Apple, but they need to learn to play with others better or they will find themselves in decline with all the Microsoft tablet products out there. Anyone wish to weigh in on this dilemma?
While I agree Apple cannot control Amazon, but on the other hand Apple could try to negotiate on behalf of all their customers. Apple is pretty powerful company, no excuses for not trying to do something. There is now an app, and we know that Amazon does market themselves as not being exclusive. This is an incredible technology and should be enjoyed by Apple customers.
Maybe you are looking for
-
Hi Gurus, By ALE config I am trying to send material from one client to another ( MATMAS ) I have created two logical systems and assigned them to corresponding clients. Created a RFC destination and assigned logical systems. Created Distribution mo
-
Adobe reader 2.0 and printing
Hi I have a pocket pc. Pocket loox 720 running windows mobile 2003se. I have installed acrobat reader. It has an option to print the document. But that option is not working. Its is always grey - that is - inactive. I dont know why. I have installed
-
Strange behavior after suspend.
Hi, For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update. Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application,
-
I can't see any of my bookmarks or sub menus now. How do I get them back?
When I click on View, Edit File Tools and Bookmark I see the depression of the outline but nothing is there.
-
Unable to import music since update
Since the most recent update, I am unable to import cds. Please assist. Thanks