Client issue with ALE Configurations

Hi Experts,
I am trying to connect to a different SAP System through ALE. I have defined logical systems. When i am trying to assign destination logical system to destination client, i am getting an error - "Entry already exists" as there is another system aready assigned with this same client number.
My Question is - Is there any way to connect to 2 Diff SAP systems having same client number? Otherwise, if there is a client (Say 400) that is already assigned to an SAP System, Then cannt we connect to another SAP system having the same client number( 400)?
Rgds,
SURYA.

No, SCC4 is only for defining the clients of current system (and the corresponding logical system, which must be unique throughout the landscape), it's not about communication at all (apart the logical system).
Use SM59 to define an RFC destination, you'll define the target host and client .
Use WE21 to create an RFC port, referring to the RFC destination above.
Use WE20 to assign this RFC port to the logical system.
By "distribute model", I don't know if you're talking about the "distribution model", in that case I recommend you to go though this thread where there are general information : Distribution model for Message control ?
Sandra

Similar Messages

Issue with ALE configuration for creating the idoc for Purchase orders

Hello,
I am trying to send the purchase order through message type configuration using ALE.
I am using idoc ORDERS05, message ORDERS, Process Code in Partner profile ME10.
In NACE transaction for the Application EF, Output Type NEU the ALE Configuration is done for Program RSNASTED Form ALE_PROCESSING.
I have done ALE distribution using BD64.
Now the problem is that when an order is created or changed in the message output of the PO I am seeing the status as yellow i.e.not processed.
In NAST table, the entry is there but on executing RSNAST00 nothing happens.
Please provide me the pointers to solve the given problem.
Regards,
Mayank

Hi,
Guess it looks like the output is getting proposed but its not getting processed. Check the output type configuration. Check the TIme Settings in the output type configuration.
It is possible to set the Time when the output must be processed. Is it on SAVE or is it set to other settings. If its set to via background job then the background job must be run to process the output types.
Check and let me know if all is fine at the output type configuration.
Cheers
VJ

Can we go with ALE configuration instead of receiver idoc adapter at target

Hi Experts,
Could you please provide me some idea when why don't we go with ALE configuration to exchange IDOC from PI to Target system instead of configuring receiver IDOC adapter at target side.

Hi Raj
Point 1:
When we send IDoc from SAP system to PI ,it used ALE connections nothing but using RFC destination and Port it establishes the connection IDoc will reach PI ABAP Stack.
Point 2:
When we send IDoc to ECC using PI IDoc adapter it uses the same mechanism(RFC destination/Port),but the only purpose of IDoc comm8unication channel is to call RFCDEstination and Port created in PI.
i.e: There is no difference in communication(Point 1 and Point 2) both uses TRFC calls.
Regards,
Raj

Issue with Network configuration - ACS 4113 Appliance

We are having issues with two particular devices. I am trying to remove and add the devices, but when I do a search and go to their IP, I receive.
Failed to edit blahblah.ourdomain.... Reason: The Host no longer exists.
How do I get rid of this so I can readd the devices?
Thanks
Dwane

Yes, ACS SE doesn't support csutil. Please use RDBMS with solution engine and see if that helps.
Creating, Reading, Updating and Deleting AAA clients
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/rdbms_sync.html#wp1011624
Regds,
JK
Do rate helpful posts-

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Issue with TableAdapter Configuration Wizard and CASE statements

I am having an issue with using any CASE statements in the select clause for the Table Adapter Configuration Wizard (TCW). I can take any query without a CASE and it will run fine, but inserting any CASE statement in the Select such as:
SELECT
(CASE WHEN :ras_sort = 'D' THEN TO_CHAR(a.TRANS_DATE,'YYYYMMDD')
WHEN :ras_sort = 'C' THEN c.CLAIMDEP_NAME
WHEN :ras_sort = 'A' THEN TO_CHAR(a.ACCOUNT_NUMBER)
END) sort1
FROM xxxx
causes the TCW to error with "error in list of function arguments, 'THEN' not recognized" and several other errors. I have tried with and without parameters in the CASE and have tried both forms of the CASE statement. I have tried multiple queries, all that run with no problem outside of TCW and ODP, but this seems to be a real issue
Is this a known problem and are there any workarounds that will allow use of the TCW?
Thanks,
Dave

Hi Ashish,
perhaps you launch the Web service wizard from the wrong location (i.e. not selecting the SEI you want to use). Did you strictly follow the steps described in the <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/44/f36fa8fd1d41aae10000000a114a6b/frameset.htm">documentation</a> for creating the web service?

AnyConnect SSL Client issue with Mac OS X

Hello this seems to be a very common issue with AnyConnect working on Mac OS X. A lot of random sites talk about this.
I have a Cisco 2801 running IOS 12.4(22)T (ADV ENT SRV) with AnyConnect 2.3 package installed.
From Windows I can connect without any issues.
From a Mac OS X after providing login credentials the AnyConnect log says its connecting... checking for updates... and then disconnects.
If this does work on Mac OS X what is needed (or needs to be configured) to get this to work properly on Mac OS X?
Thank you!

Hello All,
I recently experienced the same problem when my company upgraded to our entire company from the stone age to a VPN system using the Cisco AnyConnect. At first, I had the same problem as described above. Then my IT guy and I got on the phone with Cisco.
Here is the solution that worked for me. First, our IT department had to specifically load a MAC connection file into the VPN firewall to allow access for MacIntosh computers. Then I redownloaded the latest anyconnect files and updated whatever else through the vpn.yourcompany.com site. Finally, from www.citrix.com/download I downloaded (on the RH side under featured downloads) the appropriate Citrix ICA File.
Everything works fine now. I don't know if this will work for you, but it did the trick for us.

Client installation with Net Configuration-Assistant : ora-00604 / ora-0224

Hi forum,
I am trying to install a client on a remote computer with Net Configuration-Assistant. When testing connection as user system I always get oracle errors
ora-00604 / ora-0224.
When I try connection with sys the reaction is : should be done with sysdba or sysoper privilege.
On command line level I can login with : sqlplus sys/...@srvtstora:1527/oeg
where oeg is the ORACLE_SID in question and srvtstora is the PC on which the
database resides.
what can i do ?
Kind regards
Samplitude

error ORA-00604: error occurred at recursive SQL level
ORA-00224, 00000, "controlfile resize attempted with illegal record type (%s)"
Is it what it shows?
Then there are problems with the controlfile. Make sure you have a valid backup before proceeding any further.
On the other hand, the error when connection with sys it's because you have to specify the SYSDBA/SYSOPER role at the connecting string ( sqlplus sys/SysPasswd as sysdba)

Build 711 client issues with XGL?

Are there any known issues with installing the latest build of the 1.2
beta client (711) on the released version of SLED if XGL is enabled?
After installing the client and restarting, I got a message that my
display couldn't initialize (or something like that, it's the standard
error when X doesn't start) and it asked if I want to look at the X server
log. I said no, did the --disable-xgl, and now X came up ok. I then
reenabled XGL using the desktop effects, and 3D is working again even
after a restart.
Just wondering if the install of the client temporarily breaks XGL & X
necessitating disabling and reenabling XGL.
Joe

On Thu, 20 Jul 2006 16:28:17 +0000, linuxjoe wrote:
> Not that I know of. I have it running on my laptop with xgl and the 711
> client and it is running just fine. Typically when I see the error that you
> are running into, it is because I have done an init 3 and init 5 from the
> CNTL ALT F2 tty and still have the display running on CNTL ALT F7.
I hadn't changed my runlevel at all. Simply installed the Novell Client
and rebooted. I could see I was in runlevel 5, but with no GUI since X
couldn't start. Ran the XGL disable thing, typed startx, and now the GUI
came up. Within there use desktop effects to reenable 3D effects (all
still in runlevel 5 and having never switched to any alternate terminal
screen), log off, and now it was working. Might have just been an
isolated incident.
Joe

Lion Ichat client issues with logging into SL Ichat server

We run the iChat server on our OD master running 10.6.8. We have about 250 users and it's working great for everyone on Leopard or SL (the majority of our users).
We just started upgrading people to Lion, as well as getting some new lion machines. The people who are on Lion Pre-Configured machines seem ok, but the people who we upgrade are having issues with logging into it. Sometimes it will work just fine, and other times they just can't log in. They get the ~ symbol by their status and can't connect to the server.
The only fix seems to be trashing their prefs AND rebooting, just trashing them or just rebooting don't seem to be enough to fix this. Anyone seen or have a better fix for this? It has happened more than once for the same user.

Same problem here [https://discussions.apple.com/message/23114338#23114338].
Were you ever able to troubleshoot or fix this? File a bug report?

Issue with UDMS configuration in SAP PI 7.4

Hi All
I am trying to configure User defined search in AE of SAP PI 7.4
But for some of the interfaces i am facing the issue. I get error stating that Service Interface or Namespace doesnot exist in the set of allowed list.(but SI/Namespace exist in ESR)
This issue is only happening only with few Interfaces not all.
I have followed the below link to configure udms in AE.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/803b22cf-ad75-2f10-0790-da055f2e8c0e?overridelayout=true
Please suggest.
Thanks and Regards
Osman Abdul Aziz Jabri

The surveys functionality was not included for PPC platform in the Service Manager 4.0 release. There was I beleive a technical issue that prevented it from being included. It may be included in a future release.
--Bill

Issue with Site Configuration / Load Balancing

Were noticing strange behavior with our servers that are configured behind a load balancer. Weve got two servers with different ports and a load balancer:
Server1: https://host1:30003/opensso
Server2: https://host2:30103/opensso
Load Balancer: https://loadbalancer:30003/opensso
When we go to the admin console, we can access Server1 without a problem, but the second time we go the load balancer sends us to Server2, and our browser returns a page not found error. Weve traced the HTTP traffic and discovered that every other time we go to the admin console (the load balancers are configured round robin), Server2 always returns a bogus HTTP found URL. The response it provides is something like https://loadbalancer:*30103*/opensso/UI/Login (just an example).
The issue here is that it is properly directing the end users browser to the load balancer DNS entry. It is not however directing the end users browser to the proper port. It seems to sends its own port value to the browser. Obviously when the browser tries to access this URL the Load Balancer rejects the request because it is not listening on port 30103.
Can Multiple OpenSSO application servers (configured as a site) run from behind a load balancer when they are listening on different ports? If so, why is the application server responding to the user request with its own port, rather than that of the load balancer, yet still providing the DNS hostname entry for the load balancer the whole time.

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Issue with iphone configuration utility: eap-tls certificate selection

hello,
I am a new Apple user so if there's anything obvious, please bear with me. I also tried to search in the forum but didn't find any solution.
here's my issue:
I use iphone configuration utility v2.1 for windows. I added 2 certificates(one user cert and one CA cert) under 'credentials'. then i configured one wifi network (eap-tls using the certificate i justed added). then i synced with my phone. everything worked fine so far. however, when I tried to connect to wifi, i got error and found out that iphone was using a certificate issued by IPCU CA instead of the certificate i uploaded.
this behavior could be corrected by manually change the certificate from wireless setting. however, this has to be done every time I try to connect to wireless network which is quite frustrated. a workaround is to email me the certificate and install it from iphone. but i can't install the CA certificate via this way.
i am wondering if anyone has similar issue and how to fix this.
thanks,
-ns

the configuration utility doesn't allow you to select the iPCU cert which is kind of a self signed by the software. you could only select the cert that you imported.
upgraded to ipcu ver 2.2 today and it seems to fix the problem. will monitor it for several days and report back.

Issues with nokia configuration tool 5.0 - E72

I wanted to install a new profile and save the old one for a few people.
Since typing on the PC is much easier, I hoped I could use the configuration tool
After reading the data it lost contact and couldn't find my phone again.
A new try after running PC-Suite 7.1 first:
it finds my phone (with latest firmware) but cannot import / read any data
Any ideas?
By the way: the change language options doesn't work (only English has been installed)

Hi,
I am experiencing similar issue: from PC Suite v 7.1.40.6 I can see the Nokia E72-1 mobile phone, from the Nokia Configuration Tool v 5 I can also see the Nokia E72-1 but from the Configuration Tool I cannot Edit Online the mobile phone and I cannot push a configuration either. This is weird !
Also, wether the phone is connected through USB or Bluettooht, I get the same results.
Anyone has an idea why this happens and how to solve the situation ?
Regards,
Bluea.

HT5437 issues with Apple Configurator 1.3 and provisioning (wifi profiles)

I had a configuration profile which worked well using the previous version of apple configurator. Now with the new version something has changed, so it does not work anymore.
The documentation on how to provisioning a profile to the apple TV is still the same, eventhough the GUI and the procedures have changed in "Apple Configurator". Can you please help me, understanding the changes that have been made to v1.3, in order to properly create and provision the wifi profile to the apple tv, as described here: http://support.apple.com/kb/HT5437
thank you

Have you check the following?
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
Ensure that your device is using the latest software.
If your issue is still unresolved, perform a software restore in iTune

Client issue with ALE Configurations

Similar Messages

Maybe you are looking for