Client machine not reporting to wsus server
My server Windows Server 2008 R2 Standard x 64 virtual machine install in Hyper-v server and Install SCE management version 2010.
in sudden server stopped sending updated to client machine. So I check many and did many changed as per MS community forums. But still I have same issue.
Then I planned to install again SCE management server in different VM. But even though I am getting error that old SCE management server is existing in my domain. Therefore I am afraid to change or remove any setting in AD since I have short
of knowledge about SCE servers.
However my SCE server was working smoothly until 11-2013 and then suddenly stuck. When I check the server machine I found that local drive C: is getting full and SCE management is fail to start. So from that to now when ever I had free time I changed
many things. But unfortunately I couldn't get the sever back to normal.
Few changes which I made are below.
- Remove and reinstall WAUS several times
- Check online update and direct updated server SCE machine without getting updated from SCE
- Remove dotnet frame work and updated version 4
- product configuration wizard reconfigure
- Repair management agent in client machine.
Kindly help for me to repair my SCE server or make another installation without having change of settings.
It would be highly appreciated if you could resolve issue
The error massage is below in windows update log.
2015-02-11 11:37:46:747 904 c78 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0300) ===========
2015-02-11 11:37:46:747 904 c78 Misc = Process: C:\Windows\system32\svchost.exe
2015-02-11 11:37:46:747 904 c78 Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-11 11:37:46:747 904 c78 Service *************
2015-02-11 11:37:46:747 904 c78 Service ** START ** Service: Service startup
2015-02-11 11:37:46:747 904 c78 Service *********
2015-02-11 11:37:46:750 904 c78 Agent * WU client version 7.6.7600.320
2015-02-11 11:37:46:750 904 c78 Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-11 11:37:46:750 904 c78 Agent * Access type: No proxy
2015-02-11 11:37:46:751 904 c78 Agent * Network state: Connected
2015-02-11 11:37:58:940 904 8a0 Report CWERReporter::Init succeeded
2015-02-11 11:37:58:940 904 8a0 Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-11 11:37:58:941 904 8a0 Agent * Prerequisite roots succeeded.
2015-02-11 11:37:58:941 904 8a0 Agent *********** Agent: Initializing global settings cache ***********
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * WSUS status server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:58:941 904 8a0 Agent * Target group: (Unassigned Computers)
2015-02-11 11:37:58:941 904 8a0 Agent * Windows Update access disabled: No
2015-02-11 11:37:59:068 904 8a0 DnldMgr Download manager restoring 0 downloads
2015-02-11 11:37:59:081 904 8a0 AU ########### AU: Initializing Automatic Updates ###########
2015-02-11 11:37:59:082 904 8a0 AU # WSUS server: http://SCE-01.mubarrad.com.kw:8530
2015-02-11 11:37:59:082 904 8a0 AU # Detection frequency: 22
2015-02-11 11:37:59:082 904 8a0 AU # Approval type: Pre-install notify (Policy)
2015-02-11 11:37:59:082 904 8a0 AU # Auto-install minor updates: No (User preference)
2015-02-11 11:37:59:082 904 8a0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-11 11:37:59:082 904 8a0 AU # Will display featured software notifications (User preference)
2015-02-11 11:37:59:301 904 c78 Report *********** Report: Initializing static reporting data ***********
2015-02-11 11:37:59:301 904 c78 Report * OS Version = 6.1.7601.1.0.196880
2015-02-11 11:37:59:301 904 c78 Report * OS Product Type = 0x00000007
2015-02-11 11:37:59:313 904 c78 Report * Computer Brand = Microsoft Corporation
2015-02-11 11:37:59:313 904 c78 Report * Computer Model = Virtual Machine
2015-02-11 11:37:59:316 904 c78 Report * Bios Revision = 090004
2015-02-11 11:37:59:316 904 c78 Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2015-02-11 11:37:59:316 904 c78 Report * Bios Release Date = 2009-03-19T00:00:00
2015-02-11 11:37:59:316 904 c78 Report * Locale ID = 1033
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:352 904 8a0 AU Initializing featured updates
2015-02-11 11:37:59:352 904 8a0 AU Found 0 cached featured updates
2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:353 904 8a0 AU Successfully wrote event for AU health state:0
2015-02-11 11:37:59:354 904 8a0 AU AU finished delayed initialization
2015-02-11 11:37:59:354 904 c78 AU #############
2015-02-11 11:37:59:354 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:37:59:354 904 c78 AU #########
2015-02-11 11:37:59:356 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:01:818 904 8a0 AU Triggering AU detection through DetectNow API
2015-02-11 11:38:01:818 904 8a0 AU Will do the detection after current detection completes
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:03:808 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:03:808 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:03:808 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:03:808 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:03:808 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:03:808 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:08:092 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:08:092 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
2015-02-11 11:38:08:092 904 1de0 PT + Caller provided credentials = No
2015-02-11 11:38:08:092 904 1de0 PT + Impersonate flags = 0
2015-02-11 11:38:08:092 904 1de0 PT + Possible authorization schemes used =
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
2015-02-11 11:38:08:092 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
2015-02-11 11:38:08:093 904 1de0 Report REPORT EVENT: {62417852-380A-47BC-B153-8A8E0E198470} 2015-02-11 11:37:59:352+0300 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2015-02-11 11:38:08:098 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:08:098 904 1de0 Agent *************
2015-02-11 11:38:08:098 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:098 904 1de0 Agent *********
2015-02-11 11:38:08:098 904 1de0 Agent * Online = No; Ignore download priority = No
2015-02-11 11:38:08:098 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:098 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:098 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:440 904 1de0 Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
2015-02-11 11:38:08:441 904 1de0 Agent *********
2015-02-11 11:38:08:441 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:441 904 1de0 Agent *************
2015-02-11 11:38:08:441 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU # 0 updates detected
2015-02-11 11:38:08:441 904 edc AU #########
2015-02-11 11:38:08:441 904 edc AU ## END ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
2015-02-11 11:38:08:441 904 edc AU #############
2015-02-11 11:38:08:441 904 edc AU Featured notifications is disabled.
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:08:442 904 c78 AU #############
2015-02-11 11:38:08:442 904 c78 AU ## START ## AU: Search for updates
2015-02-11 11:38:08:442 904 c78 AU #########
2015-02-11 11:38:08:444 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:08:444 904 1de0 Agent *************
2015-02-11 11:38:08:444 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:08:444 904 1de0 Agent *********
2015-02-11 11:38:08:444 904 1de0 Agent * Online = Yes; Ignore download priority = No
2015-02-11 11:38:08:444 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-11 11:38:08:444 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-11 11:38:08:444 904 1de0 Agent * Search Scope = {Machine}
2015-02-11 11:38:08:444 904 1de0 Setup Checking for agent SelfUpdate
2015-02-11 11:38:08:445 904 1de0 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Misc WARNING: DownloadFileInternal failed for http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab: error 0x80072efd
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: DownloadCab failed, err = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EFD
2015-02-11 11:38:25:564 904 1de0 Setup FATAL: SelfUpdate check failed, err = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Skipping scan, self-update check returned 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Exit code = 0x80072EFD
2015-02-11 11:38:25:565 904 1de0 Agent *********
2015-02-11 11:38:25:565 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-11 11:38:25:565 904 1de0 Agent *************
2015-02-11 11:38:25:565 904 1de0 Agent WARNING: WU client failed Searching for update with error 0x80072efd
2015-02-11 11:38:25:565 904 1de0 Report CWERReporter finishing event handling. (00000000)
2015-02-11 11:38:25:565 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU # WARNING: Search callback failed, result = 0x80072EFD
2015-02-11 11:38:25:566 904 edc AU # WARNING: Failed to find updates with error code 80072EFD
2015-02-11 11:38:25:566 904 edc AU #########
2015-02-11 11:38:25:566 904 edc AU ## END ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
2015-02-11 11:38:25:566 904 edc AU #############
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:566 904 edc AU AU setting next detection timeout to 2015-02-11 13:38:25
2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:25:567 904 edc AU Successfully wrote event for AU health state:0
2015-02-11 11:38:30:595 904 1de0 Report REPORT EVENT: {6470B8FE-1600-4F7B-807F-6031606ECC8B} 2015-02-11 11:38:25:564+0300 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072efd SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072efd.
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-11 11:38:30:613 904 1de0 Report WER Report sent: 7.6.7600.320 0x80072efd D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-11 11:38:30:613 904 1de0 Report CWERReporter finishing event handling. (00000000)
Can you try the below to reset the authorization and force a connection back from one of the win 7 machines:
it should help pinpoint exact issues.
1. Record the system time.
2. Reboot the system (or restart the Windows Update service).
3. After reboot run the command wuauclt
/resetauthorization /detectnow.
4. Wait 30 minutes.
5. Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
Do you have any Windows 7 machines that are reporting? Are other machines with different operating systems reporting correctly?
Similar Messages
-
I too have many clients that have not reported to the Wsus Server.
The clients are listed in the All Computers group of WSUS
I have created target groups
The computers are listed in the correct target groups
I have approved update for the target group
Clients are not reporting at all
ThanksI too have many clients that have not reported to the Wsus Server.
The computers are listed in the correct target groups
Clients are not reporting at all
What do you mean by "not reporting"... they're listed in the console? What is the "Last Contact" date? What is the "Last Reported Date".
Run a detection event on one of the clients and post the results from the WindowsUpdate.log.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile:
http://mvp.support.microsoft.com/profile/Lawrence.Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
VAMT 3.0 Duplicate Client Machine ID Report showing excessive number of computers
We are running a KMS on a 2008 R2 VM with plenty of CPU, RAM and storage. I recently configured and installed the Volume Activation Management Tool 3.0. Everything seems to be working well except that reviewing the Volume License
Reports, specifically the Duplicate Client Machine ID Report, I noticed an excessive number (about 4 times the number of actual managed computers) are listed in this report node. Even assuming that computer images were not being sysprep'd this
seems really odd. The License Overview shows 1,813 licensed and 1,678 unknown (possibly off or disconnected devices) and our duplicate CMID report shows about 8,300 plus. What are the possible causes why this number is so high and how do I troubleshoot
and remediate inaccuracies?Duplicate CMID can come if you didnt used /generalize option when sysprep'ing. (http://blogs.technet.com/b/askcore/archive/2009/10/16/kms-host-client-count-not-increasing-due-to-duplicate-cmid-s.aspx)
Please check your KMS's log, to be sure if true or not. If duplicate, it will be logged by your KMS's host.
In virtual, like XenDesktop or View with a golden image it can easilly happen, as the CMID is kept by the server for the virtual's machine (aka the PVS for XenDesktop)
Regards, Philippe
Don't forget to mark as answer or vote as
helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!
Hi Yagmoth555, thanks for the reply. I know this is not the case for our environment as it's telling me that physical systems that were installed with the ISO have duplicate ID's. Also, the previous version of VAMT that we were running didn't show
1,560 systems as having the same ID. I have already deleted every "product" from the database and rescanned our environment, but I get the same result. -
Windows 8 and 2012 are not reporting to wsus
hi
i have a windows server 2008 r2 sp1 with latest patch installed wsus
3.2.7
newly installed windows 8 and server 2012 are not reporting to wsus
please helpAm 29.04.2014 schrieb Prasoon.PV:
i have a windows server 2008 r2 sp1 with latest patch installed wsus 3.2.7
Which version from WSUS exactly do have?
WSUS 3.0 (SP2): Build 3.2.7600.226
WSUS 3.0 (SP2) + KB2720211: Build 3.2.7600.251
WSUS 3.0 (SP2) + KB2734608: Build 3.2.7600.256
WSUS 3.0 (SP2) + KB2828185: Build 3.2.7600.262
The Version Number you will find on the startpage from WSUS.
http://www.wsus.de/images/wsus-version.png
newly installed windows 8 and server 2012 are not reporting to wsus
If you have .262 installed, pls control in registry for WSUS-Settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
"WUServer"="http://WSUS-Server-Name oder IP-Adresse:Port"
"WUStatusServer"="http://WSUS-Server-Name oder IP-Adresse:Port"
If there is your WSUS, have a look in %windir%\WindowsUpdate.log for
errors.
Servus
Winfried
Gruppenrichtlinien
WSUS Package Publisher
HowTos zum WSUS Package Publisher
NNTP-Bridge für MS-Foren -
Client machines losing connection to Leopard Server
I have a small office set up as follows: 20" iMac (Intel) running Leopard Server. 4 client machines, all Macs, All Intel, also running Leopard client. I have these machines connected to a Linksys 8 port 10/100 router...and then to a cable modem for Internet Access. The problem that I'm having is that the client machines lose connection to the server multiple times each day. A restart and reconnect seem to fix the problem...only temporarily. At first, I thought it might be the Linksys Router so I put a Gigabit switch in between the machines and the router with the same results. I have the router on a static IP of 192.168.1.2 and am not running DHCP, DNS, or any other services other than file sharing. If any of you have experienced this, I would greatly appreciate any direction you might have.
Thanks in advance.
DanIt may be a 'typo' by you, but forget about 'appletalk' - this is not relevant to your problem (and pretty well redundant now). This looks like a TCP/IP issue.
What is doing your DHCP? Presumably you have checked to ensure that there is only the one dhcp server in your network, and another has not accidentally been enabled (on a server, router or airport). What is the dhcp range for the DHCP server?
Your post suggested that the servers, with static IPs, also 'drop off' the network. So a server IP cannot be pinged from a lan machine which has a correct IP assigned to it (rather than one which has a 169 address which obviously will not be able to ping it) ?
On your laptops, when connected via an ethernet cable, have a look at Network Prefs-> Show: Network Port Configurations. In what order are these? Specifically, I am wondering if Airport is getting prioritised above Built-in Ethernet and maybe there is a 'rogue' airport network which the laptops discover and attempt to join ahead of built-in ethernet.
-david -
try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumartry
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif -
WSUS Windows 7 Client not connecting with WSUS SERVER 2012 R2 Error " 80072ee2"
Hi ,
I Have the Non- AD WSUS server 2012 R2 as WSUS server, and widnows 7 ent sp1 as WSUS Client , the server and client are in teh same ip range and able to ping both server from client and client from server, and both are in teh
same time zone(EST), But im getting the "80072ee2" when ever i tried to get the updates from client
Please help me on this
Thanks
Balaji KRecord the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
I have noted the time at 12:06 am and reboot the machine. and at 12:27 i have Run this command from a
command prompt: wuauclt /resetauthorization /detectnow. and taken the the logs from 11 am to 1 pm
2015-02-03 12:15:26:002
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:15:26:002
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:15:26:002
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:15:26:002
956 f84
PT + Caller provided credentials = No
2015-02-03 12:15:26:002
956 f84
PT + Impersonate flags = 0
2015-02-03 12:15:26:002
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:15:26:002
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:27:05:651
956 ca8
AU Triggering AU detection through DetectNow API
2015-02-03 12:27:05:651
956 ca8
AU Triggering Online detection (non-interactive)
2015-02-03 12:27:05:652
956 930
AU #############
2015-02-03 12:27:05:652
956 930
AU ## START ## AU: Search for updates
2015-02-03 12:27:05:652
956 930
AU #########
2015-02-03 12:27:05:654
956 930
AU <<## SUBMITTED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:27:05:654
956 f84
Agent *************
2015-02-03 12:27:05:654
956 f84
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:27:05:654
956 f84
Agent *********
2015-02-03 12:27:05:654
956 f84
Agent * Online = Yes; Ignore download priority = No
2015-02-03 12:27:05:654
956 f84
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-03 12:27:05:654
956 f84
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-03 12:27:05:654
956 f84
Agent * Search Scope = {Machine}
2015-02-03 12:27:05:678
956 f84
Setup Checking for agent SelfUpdate
2015-02-03 12:27:05:678
956 f84
Setup Client version: Core: 7.5.7601.17514 Aux: 7.5.7601.17514
2015-02-03 12:27:29:233
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:29:233
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:29:233
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:29:234
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:27:52:795
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:27:52:795
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:27:52:795
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:27:52:796
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:16:363
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:16:363
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:16:364
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:920
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:28:39:920
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:28:39:920
956 f84
Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://135.155.61.172:8530/selfupdate/wuident.cab>. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Misc WARNING: DownloadFileInternal failed for http://135.155.61.172:8530/selfupdate/wuident.cab: error 0x80072ee2
2015-02-03 12:28:39:921
956 f84
Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
2015-02-03 12:28:39:921
956 f84
Setup FATAL: SelfUpdate check failed, err = 0x80072EE2
2015-02-03 12:28:39:922
956 f84
Agent * WARNING: Skipping scan, self-update check returned 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent * WARNING: Exit code = 0x80072EE2
2015-02-03 12:28:39:923
956 f84
Agent *********
2015-02-03 12:28:39:923
956 f84
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-03 12:28:39:923
956 f84
Agent *************
2015-02-03 12:28:39:923
956 f84
Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2015-02-03 12:28:39:924
956 fec
AU >>## RESUMED ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Search callback failed, result = 0x80072EE2
2015-02-03 12:28:39:924
956 fec
AU # WARNING: Failed to find updates with error code 80072EE2
2015-02-03 12:28:39:924
956 fec
AU #########
2015-02-03 12:28:39:924
956 fec
AU ## END ## AU: Search for updates [CallId = {710EE50A-0397-4DC8-B33B-B97410B73C00}]
2015-02-03 12:28:39:924
956 fec
AU #############
2015-02-03 12:28:39:925
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:925
956 fec
AU AU setting next detection timeout to 2015-02-03 21:23:35
2015-02-03 12:28:39:926
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:28:39:928
956 fec
AU Successfully wrote event for AU health state:0
2015-02-03 12:29:03:495
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:03:495
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:03:496
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:03:496
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:03:496
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:03:496
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:03:496
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:29:03:496
956 f84
Report REPORT EVENT: {B6636CDB-B0BF-4CDE-BEB3-D49C1CEC258F}
2015-02-03 12:28:39:921-0800 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 80072ee2
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2015-02-03 12:29:03:510
956 f84
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-03 12:29:03:510
956 f84
Report WER Report sent: 7.5.7601.17514 0x80072ee2 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2015-02-03 12:29:03:510
956 f84
Report CWERReporter finishing event handling. (00000000)
2015-02-03 12:29:27:075
956 f84
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:29:27:075
956 f84
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:29:27:075
956 f84
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:29:27:075
956 f84
PT + Caller provided credentials = No
2015-02-03 12:29:27:075
956 f84
PT + Impersonate flags = 0
2015-02-03 12:29:27:075
956 f84
PT + Possible authorization schemes used =
2015-02-03 12:29:27:075
956 f84
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:29:27:075
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:29:27:076
956 f84
Report WARNING: Reporter failed to upload events with hr = 80072ee2.
2015-02-03 12:53:05:793
956 930
AU AU received policy change subscription event
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: Send failed with hr = 80072ee2.
2015-02-03 12:58:26:707
956 8fc
Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
2015-02-03 12:58:26:708
956 8fc
PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status code = 0
2015-02-03 12:58:26:708
956 8fc
PT + Caller provided credentials = No
2015-02-03 12:58:26:708
956 8fc
PT + Impersonate flags = 0
2015-02-03 12:58:26:708
956 8fc
PT + Possible authorization schemes used =
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig failure, error = 0x80072EE2, soap client error = 5, soap error code = 0, HTTP status code = 200
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: GetConfig_WithRecovery failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshConfig failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: RefreshPTState failed: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
PT WARNING: PTError: 0x80072ee2
2015-02-03 12:58:26:708
956 8fc
Report WARNING: Reporter failed to upload events with hr = 80072ee2. -
Server 2012 R2 Clients will not update via WSUS
We're having a problem with our Server 2012 R2 servers not updating as of about a month ago. I've read the article about KB2959977. I don't know if that is the issue or not, but the timing seems about right. If I go to install this update
on the affected servers, I get a Window that just hangs at "Searching for updates on this computer".
When I look at the Windows update log, I get repeated entries of:
2014-08-04 10:22:03:030 896 5a4 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1
With the number at the end of cNetworkInterfaces incrementing and decrementing every few minutes or so
2014-08-04 09:23:42:079 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:24:19:647 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:24:19:834 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:25:22:702 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:25:22:702 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:25:37:850 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:25:37:865 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:26:40:926 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:26:40:926 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:26:40:926 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:27:11:499 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:27:11:905 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:28:14:569 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:28:14:569 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:28:20:384 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:28:20:431 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:29:23:452 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:29:23:452 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:29:23:452 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:29:42:113 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:29:42:457 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:30:45:176 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:30:45:176 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:30:45:192 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:31:21:106 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:31:21:481 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:32:24:198 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:32:24:214 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:32:42:561 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:32:42:999 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:33:45:652 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:33:45:652 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:34:19:376 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:34:19:516 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:35:22:526 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:35:22:526 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:35:22:526 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:35:22:526 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:36:11:346 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:36:11:534 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:37:14:415 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:37:14:415 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:37:14:415 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:37:14:415 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:37:22:462 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:37:22:540 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:38:25:561 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:38:25:561 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:38:45:781 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:38:46:047 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:39:48:804 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:39:48:804 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:40:23:180 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:40:23:555 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:41:26:324 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:41:26:324 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:41:47:481 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:41:47:559 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:42:50:501 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:42:50:517 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:42:50:517 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:43:21:737 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:43:22:065 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:44:24:803 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:44:24:803 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:45:17:791 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:45:18:072 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:46:20:855 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:46:20:855 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:46:24:495 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:46:24:574 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:47:27:562 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:47:27:562 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:47:27:562 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:47:27:562 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:47:47:516 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:47:47:578 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:48:50:551 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:48:50:567 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:49:24:958 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:49:25:083 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:50:28:024 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:50:28:024 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:50:28:024 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:50:47:727 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:50:48:086 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:51:50:775 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:51:50:791 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:52:23:746 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:52:24:089 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:53:26:795 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:53:26:795 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:53:26:795 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:53:26:795 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:54:25:641 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:54:26:094 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:55:28:688 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:55:28:688 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:55:47:813 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:55:48:094 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:56:50:876 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:56:50:876 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:56:50:876 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:56:50:876 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:57:26:173 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:57:26:595 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:58:29:235 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:58:29:235 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:58:29:235 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:58:29:266 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:58:45:157 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:58:45:595 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
2014-08-04 09:59:48:157 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:59:48:157 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 09:59:48:157 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 09:59:48:173 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2014-08-04 10:00:21:298 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-08-04 10:00:21:595 880 a2c Service UpdateNetworkState Ipv6, cNetworkInterfaces = 2.
I've attempted deleting it from the actual WSUS server itself, stopping the service, deleting the Software Distribution folder, restarting the service, wuauclt /resetquthorization /detectnow and various other combinations to re-initialize but all I end up
getting are these constant messages in the logs.
Other interesting errors are:
2014-08-04 08:50:23:644 2132 1140 CltUI FATAL: CNetworkCostChangeHandler::RegisterForCostChangeNotifications: CoCreateInstance failed with error 80004002
2014-08-04 08:50:23:644 2132 1140 CltUI WARNING: RegisterNetworkCostChangeNotification: Error 80004002
Anyone else seeing this sort of weird behavior? Only happens on 2012 R2 servers.Hello,
In order to resolve the issue, we need get more information.
What is the current version of your WSUS server? For WSUS 3.2, please apply
KB3734608.
How did you configure your GPO?
Run nslookup WSUSservername, does the output show the correct IP address? -
We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks. -
CLIENT UNABLE TO UPDATE from WSUS SERVER
Dear all
we have a WSUS server installed on windows server 2012, the clients is no longer able to download updates, getting error WindowsUpdate_80072EE2" "WindowsUpdate_dt000"
here is the client log file
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
Bypass List used : <(null)> Auth Schemes used : <>
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://rwf-1:8530/selfupdate/wuident.cab>.
error 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed.
error 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-02-17 18:20:13:346 1024 f98 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-02-17 18:20:13:358 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-02-17 18:20:13:363 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:365 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-02-17 18:20:13:371 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:379 1024 f98 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-02-17 18:20:13:385 1024 f98 Misc Microsoft signed: Yes
2014-02-17 18:20:13:400 1024 f98 Setup Determining whether a new setup handler needs to be downloaded
2014-02-17 18:20:13:400 1024 f98 Setup SelfUpdate handler is not found. It will be downloaded
2014-02-17 18:20:13:400 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:403 1024 f98 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:403 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:414 1024 f98 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:414 1024 f98 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-02-17 18:20:13:432 1024 f98 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
is already installed.
2014-02-17 18:20:13:432 1024 f98 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-02-17 18:20:13:723 1024 f98 PT +++++++++++ PT: Synchronizing
server updates +++++++++++
2014-02-17 18:20:13:723 1024 f98 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL
= http://rwf-1:8530/ClientWebService/client.asmx
2014-02-17 18:20:13:858 1024 f98 PT WARNING: Cached cookie has expired or new PID is available
2014-02-17 18:20:13:858 1024 f98 PT Initializing simple targeting cookie, clientId = 5c40eee5-ae54-4cbd-8758-a694a59ade20,
target group = ROLMAN, DNS name = it.rolmanworld.com
2014-02-17 18:20:13:858 1024 f98 PT Server URL = http://rwf-1:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-02-17 18:21:14:006 1024 f98 Misc WARNING: Send failed with hr = 80072ee2.
2014-02-17 18:21:14:006 1024 f98 Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)>
Bypass List used : <(null)> Auth Schemes used : <>
2014-02-17 18:21:14:006 1024 f98 PT + Last proxy send request failed with hr = 0x80072EE2, HTTP status
code = 0
2014-02-17 18:21:14:006 1024 f98 PT + Caller provided credentials = No
2014-02-17 18:21:14:006 1024 f98 PT + Impersonate flags = 0
2014-02-17 18:21:14:006 1024 f98 PT + Possible authorization schemes used =
2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie failure, error = 0x80072EE2, soap client error = 5, soap
error code = 0, HTTP status code = 200
2014-02-17 18:21:14:006 1024 f98 PT WARNING: PTError: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: GetCookie_WithRecovery failed : 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshCookie failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: RefreshPTState failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: Sync of Updates: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 PT WARNING: SyncServerUpdatesInternal failed: 0x80072ee2
2014-02-17 18:21:14:006 1024 f98 Agent * WARNING: Failed to synchronize, error = 0x80072EE2
2014-02-17 18:21:14:009 1024 f98 Agent * WARNING: Exit code = 0x80072EE2
2014-02-17 18:21:14:009 1024 f98 Agent *********
2014-02-17 18:21:14:009 1024 f98 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-02-17 18:21:14:009 1024 f98 Agent *************
2014-02-17 18:21:14:009 1024 f98 Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2014-02-17 18:21:14:024 1024 d9c AU >>## RESUMED ## AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
2014-02-17 18:21:14:024 1024 d9c AU # WARNING: Search callback failed, result = 0x80072EE2
2014-02-17 18:21:14:024 1024 d9c AU # WARNING: Failed to find updates with error code 80072EE2
2014-02-17 18:21:14:024 1024 d9c AU #########
2014-02-17 18:21:14:024 1024 d9c AU ## END ## AU: Search for updates [CallId = {B6B4993C-E64D-41EE-BB3B-4C0259522B34}]
2014-02-17 18:21:14:024 1024 d9c AU #############
2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:14:024 1024 d9c AU AU setting next detection timeout to 2014-02-17 19:21:14
2014-02-17 18:21:14:024 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:14:025 1024 d9c AU Successfully wrote event for AU health state:0
2014-02-17 18:21:19:010 1024 f98 Report REPORT EVENT: {37C49AAA-0782-441A-85BD-BC86F384B332}2014-02-17 18:21:14:009+0400 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072ee2AutomaticUpdates Failure Software
Synchronization Windows Update Client failed to detect with error 0x80072ee2.
2014-02-17 18:21:19:060 1024 f98 Report CWERReporter::HandleEvents - WER report upload completed with status
0x8
2014-02-17 18:21:19:060 1024 f98 Report WER Report sent: 7.6.7600.256 0x80072ee2 00000000-0000-0000-0000-000000000000
Scan 101 Managed
2014-02-17 18:21:19:060 1024 f98 Report CWERReporter finishing event handling. (00000000)
I've tried all the ways, restarting the services, file permissions, and many other
PLEASE HELP
thank youthank you for your reply,
I tried so many ways but couldn't solve it, then I removed the WSUS rule, and re-install it
then after installing the rule i'm getting error when configuring the WSUS ERROR : http://i.imgur.com/eqm9ViT.png
Post install is starting
Fatal Error: Failed to start and configure the WSUS service
and here is the log file
2014-02-20 08:37:47 Postinstall started
2014-02-20 08:37:47 Detected role services: Api, UI, WidDatabase, Services
2014-02-20 08:37:47 Start: LoadSettingsFromParameters
2014-02-20 08:37:47 Content local is: True
2014-02-20 08:37:47 Content directory is: E:\WSUS
2014-02-20 08:37:47 SQL instname is:
2014-02-20 08:37:47 End: LoadSettingsFromParameters
2014-02-20 08:37:47 Start: Run
2014-02-20 08:37:47 Configuring content directory...
2014-02-20 08:37:47 Configuring groups...
2014-02-20 08:37:48 Starting group configuration for WSUS Administrators...
2014-02-20 08:37:48 Found group in regsitry, attempting to use it...
2014-02-20 08:37:48 Searching for existing group...
2014-02-20 08:37:48 Existing group was found
2014-02-20 08:37:48 Writing group to registry...
2014-02-20 08:37:48 Finished group creation
2014-02-20 08:37:48 Starting group configuration for WSUS Reporters...
2014-02-20 08:37:48 Found group in regsitry, attempting to use it...
2014-02-20 08:37:48 Searching for existing group...
2014-02-20 08:37:48 Existing group was found
2014-02-20 08:37:48 Writing group to registry...
2014-02-20 08:37:48 Finished group creation
2014-02-20 08:37:48 Configuring permissions...
2014-02-20 08:37:48 Fetching content directory...
2014-02-20 08:37:48 Fetching ContentDir from registry store
2014-02-20 08:37:48 Value is E:\WSUS
2014-02-20 08:37:48 Fetching group SIDs...
2014-02-20 08:37:48 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:48 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:48 Fetching WsusReportersSid from registry store
2014-02-20 08:37:48 Value is S-1-5-21-495251104-1553465597-2720485832-1635
2014-02-20 08:37:48 Creating group principals...
2014-02-20 08:37:49 Granting directory permissions...
2014-02-20 08:37:49 Granting permissions on content directory...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Granting registry permissions...
2014-02-20 08:37:49 Configuring shares...
2014-02-20 08:37:49 Configuring network shares...
2014-02-20 08:37:49 Fetching content directory...
2014-02-20 08:37:49 Fetching ContentDir from registry store
2014-02-20 08:37:49 Value is E:\WSUS
2014-02-20 08:37:49 Fetching WSUS admin SID...
2014-02-20 08:37:49 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:49 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:49 Content directory is local, creating content shares...
2014-02-20 08:37:49 Creating share "UpdateServicesPackages" with path "E:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published on this WSUS system."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:49 Creating share...
2014-02-20 08:37:49 Share successfully created
2014-02-20 08:37:49 Creating share "WsusContent" with path "E:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:49 Creating share...
2014-02-20 08:37:49 Share successfully created
2014-02-20 08:37:49 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-02-20 08:37:49 Deleting existing share...
2014-02-20 08:37:50 Creating share...
2014-02-20 08:37:50 Share successfully created
2014-02-20 08:37:50 Finished creating content shares
2014-02-20 08:37:50 Configuring WID database...
2014-02-20 08:37:50 Configuring the database...
2014-02-20 08:37:50 Establishing DB connection...
2014-02-20 08:37:50 Checking to see if database exists...
2014-02-20 08:37:50 Database exists
2014-02-20 08:37:50 Switching database to single user mode...
2014-02-20 08:37:53 Loading install type query...
2014-02-20 08:37:53 DECLARE @currentScriptVersion int
DECLARE @currentDBVersion int
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
SELECT 1
END
ELSE
BEGIN
SET @currentScriptVersion = (9200 + 16384)
SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
IF @currentDBVersion < 926
BEGIN
SELECT 3
END
ELSE IF @currentDBVersion < @currentScriptVersion
BEGIN
SELECT 2
END
ELSE IF @currentDBVersion = @currentScriptVersion
BEGIN
SELECT 0
END
ELSE
BEGIN
SELECT 4
END
END
2014-02-20 08:37:53 Install type is: Reinstall
2014-02-20 08:37:53 Creating logins...
2014-02-20 08:37:53 Fetching account info for S-1-5-20
2014-02-20 08:37:53 Found principal
2014-02-20 08:37:53 Found account
2014-02-20 08:37:53 Got binary SID
2014-02-20 08:37:53 Fetching WsusAdministratorsSid from registry store
2014-02-20 08:37:53 Value is S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Fetching account info for S-1-5-21-495251104-1553465597-2720485832-1634
2014-02-20 08:37:53 Found principal
2014-02-20 08:37:53 Found account
2014-02-20 08:37:53 Got binary SID
2014-02-20 08:37:53 Setting content location...
2014-02-20 08:37:53 Fetching ContentDir from registry store
2014-02-20 08:37:53 Value is E:\WSUS
2014-02-20 08:37:53 Swtching DB to multi-user mode......
2014-02-20 08:37:56 Finished setting multi-user mode
2014-02-20 08:37:56 Writing DB settings to registry...
2014-02-20 08:37:56 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-02-20 08:37:56 Configuring IIS...
2014-02-20 08:37:56 Start: ConfigureWebsite
2014-02-20 08:37:56 Configuring website on port 8530
2014-02-20 08:38:48 2014-02-20 08:38:10 Info IISCustomAction Performing Setup Action, Command /Install
2014-02-20 08:38:46 Info IISCustomAction Command /Install Succeeded
2014-02-20 08:38:48 End: ConfigureWebsite
2014-02-20 08:38:48 Configuring performance counters...
2014-02-20 08:38:48 Configuring Stats.NET perf counter...
2014-02-20 08:38:48 Configuring reporting perf counter...
2014-02-20 08:38:48 Configuring client webservice perf counter...
2014-02-20 08:38:48 Configuring server sync webservice perf counter...
2014-02-20 08:38:48 Configuring API remoting perf counter...
2014-02-20 08:38:48 Bringing services online...
2014-02-20 08:38:48 Checking initialization status...
2014-02-20 08:38:48 StartServer starting...
2014-02-20 08:38:48 Generating encryption key to write to the registry...
2014-02-20 08:38:48 Generating encryption key to write to the database...
2014-02-20 08:38:48 Generating encryption key succeeded...
2014-02-20 08:38:48 Setting WSUSService to autostart...
2014-02-20 08:38:48 WSUSService is set to autostart.
2014-02-20 08:38:48 Starting WSUSService...
2014-02-20 08:38:48 Failed to start WsusService. Exception: System.InvalidOperationException: Cannot start service WSUSService on computer '.'. ---> System.ComponentModel.Win32Exception: An instance of the service is already running
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.UpdateServices.Setup.StartServer.StartServer.StartAndConfigureService()
2014-02-20 08:38:48 Importing default detectoids.
2014-02-20 08:38:48 Importing CriticalUpdates.xml...
2014-02-20 08:38:49 Importing Drivers.xml...
2014-02-20 08:38:49 Importing FeaturePacks.xml...
2014-02-20 08:38:49 Importing MicrosoftCorporation.xml...
2014-02-20 08:38:49 Importing SecurityUpdates.xml...
2014-02-20 08:38:49 Importing ServicePacks.xml...
2014-02-20 08:38:49 Importing Tools.xml...
2014-02-20 08:38:49 Importing UpdateRollups.xml...
2014-02-20 08:38:49 Importing Updates.xml...
2014-02-20 08:38:49 Importing Windows.xml...
2014-02-20 08:38:49 Importing Windows2000family.xml...
2014-02-20 08:38:49 Importing WindowsServer2003DatacenterEdition.xml...
2014-02-20 08:38:50 Importing WindowsServer2003Family.xml...
2014-02-20 08:38:50 Importing WindowsXPfamily.xml...
2014-02-20 08:38:50 Importing LocalPublisher.xml...
2014-02-20 08:38:50 Importing LocallyPublishedPackages.xml...
2014-02-20 08:38:50 Importing Applications.xml...
2014-02-20 08:38:50 Importing Exchange.xml...
2014-02-20 08:38:50 Importing Office.xml...
2014-02-20 08:38:50 Importing SQL.xml...
2014-02-20 08:38:50 Importing Exchange2000Server.xml...
2014-02-20 08:38:50 Importing ExchangeServer2003.xml...
2014-02-20 08:38:50 Importing OfficeXP.xml...
2014-02-20 08:38:50 Importing Office2003.xml...
2014-02-20 08:38:50 Importing SQLServer.xml...
2014-02-20 08:38:50 Importing WindowsXP64BitEditionVersion2003.xml...
2014-02-20 08:38:50 Importing DefinitionUpdateSusXml.xml...
2014-02-20 08:38:50 Importing ClientServicingApiDetectoid.xml...
2014-02-20 08:38:50 Importing default detectoids succeeded.
2014-02-20 08:38:52 FixSubscriptionCategories failed. Exception: System.Net.WebException: The request failed with HTTP status 400: Bad Request.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.Internal.ApiRemoting.GetServerVersion()
at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.GetServerVersion()
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.CreateUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer..ctor(Boolean bypassApiRemoting)
at Microsoft.UpdateServices.Setup.StartServer.StartServer.FixSubscriptionCategories()
2014-02-20 08:38:52 StartServer encountered errors. Exception=The request failed with HTTP status 400: Bad Request.
2014-02-20 08:38:52 Microsoft.UpdateServices.Administration.CommandException: Failed to start and configure the WSUS service
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
PLEASE HELP
BEST REGARDS -
Server 2008 TS - some client could not connect to the server
Hi guys,
I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
"Because of a security error, the client could not connect to the remote computer.
Very that you are logged on the network, and then try connecting again."
I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
http://support.microsoft.com/kb/2477176/hu
(These scanners can connecto to another Terminal Server.)
Is it client or server-side issue?
Have you another idee?
Regards,
GaborHi,
Thank you for posting in Windows Server Forum.
Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
You can also refer below article for additional information.
How to resolve the issue “Remote Desktop Disconnected” or “Unable to
Connect to Remote Desktop (Terminal Server)”
Hope it helps!
Thanks.
Dharmesh Solanki -
Why won't my clients register with my new WSUS server??
Hi All,Been running WSUS 3.0 SP2 on Server 2008 for a good few years now (originally moved away from it running on Server 2003 when I first started in my current role), and a couple of days back, I finally got round to throwing up a new 2012 VM with the WSUS role installed...When I moved clients from the 2003 WSUS to the 2008 instance, literally all I did was change the intranet location in the GPO I had created for WSUS to point to the 2008 server, and voila! Clients started reporting in within a few hours!This time, it's been 2 days now, and even though I've changed the GPO, and verified that it has updated on the clients by using GPResult, none of them have contacted the new WSUS server yet...I've tried running wuauclt with the /detectnow and /reportnow switches, and nothing.How exasperating!
This topic first appeared in the Spiceworks CommunityHi All,Been running WSUS 3.0 SP2 on Server 2008 for a good few years now (originally moved away from it running on Server 2003 when I first started in my current role), and a couple of days back, I finally got round to throwing up a new 2012 VM with the WSUS role installed...When I moved clients from the 2003 WSUS to the 2008 instance, literally all I did was change the intranet location in the GPO I had created for WSUS to point to the 2008 server, and voila! Clients started reporting in within a few hours!This time, it's been 2 days now, and even though I've changed the GPO, and verified that it has updated on the clients by using GPResult, none of them have contacted the new WSUS server yet...I've tried running wuauclt with the /detectnow and /reportnow switches, and nothing.How exasperating!
This topic first appeared in the Spiceworks Community -
Hot fix not applied to WSUS server
I am running windows 2008 SP2 with WSUS 3.0 sp2. I have tried to apply several hotfixes and I reboot and look at the help page and I am still on Version: 3.2.7600.226. No matter what KB I apply this never changes. So it is not detecting
my windows 8 machines correctly. How do I get the hotfixes applied. I click on install on them and they say updating and then it says successfully finished but the version number never changes. Any help would be appreciated.and I reboot and look at the help page and I am still on Version: 3.2.7600.226.
The problem is that you're looking at the help page. This is a long-standing bug in the Microsoft Management Console (MMC) that does not update the About->Help of the base product when patched.
The authoritative source for the current build of a WSUS server is on the Details Pane of the root node of the console, in the lower right corner where it identifies the current "Server Version".
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Applescript to log in client machines not working on Mavericks
I have been using this terminal command to log in to a local account:
osascript -e 'tell application "System Events"' -e 'keystroke "USERNAME"' -e 'keystroke tab' -e 'delay 0.5' -e 'keystroke "PASSWORD"' -e 'delay 0.5' -e 'keystroke return' -e 'end tell'
And up until Mavericks, it worked perfectly. Under Mavericks, nothing happens when I run the script following a client restart.
If I physically visit the client machine, and click the mouse, it'll drop the cursor in the user name box, and the log in script will work. If I don't click the mouse, then the cursor will not be in the box. No "keystroke tab" or any other key press will get the cursor into the box, only a physical click.
I've tried several scripts that simulate a mouse click, but they don't work. It takes a mouse physically being clicked to make the cursor appear.
So, does anyone know how to get a client log in script working in Mavericks? It would greatly speed up my process.I've noticed that the Login window in Mavericks is not active without a Mouse Click if it has been sitting on the login screen for a while or after restart.
You can't just start typing a user name to get it to select that user. You must click on the screen, first.
I have filed a bug report, but I haven't received any response.
It might be related to that same issue. -
Can you write an excel file on client machine instead of on the server
I am trying to user cfSpreadSheet functon. The first question I have is, can you write the file on a client machine? I tried but they all end up on the server drive. Scecond question, is there a way to do row and column range formating in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion server version 9.01.
Thanks.To expand on Dan's answer: CF doesn't have any interaction with the client browser at all: client->server comms are handled by the client and the web server; the web server simply asks CF to provide the response data if the file requested is a CF file. But even then all CF does is process the requested file and return data to the web server.
Also, one of the restrictions of the HTTP protocol is that that there is *no* *way* that the server can write to the client machine. All it can do is send data to the client agent (eg: a web browser) in response to the client agent requesting it. Can you imagine the sort of security problems one would open one's self up to if a remote web server could write to your PC????
Adam
Maybe you are looking for
-
How do i clean spots on monitor of macbook pro with retina display?
how do i clean spots on monitor of macbook pro with retina display?
-
Error #2032 in Production Environment
We're leveraging BOE to automate the refresh of Xcelsius dashboards. Connecting to Webi via Live Office, which plugs into the Xcelsius template through its data manager. The configuration worked fine in integration server but when it was migrated t
-
TS1398 Our work connection to WPA-Enterprise now drops after about 5 minutes.
The wifi now has to be constantly reconnected. This only started happening after the IOS 6 update. Is nobody else experiencing this?
-
Can't delete metadata for multiple tracks in iTunes 12
Hi. I have about 20 tracks in iTunes and I want to delete the metadata on all of them at once, something I've done a thousand times on prior versions of iTunes. I select the tracks, hit Apple-I, and make global changes, i.e. deleting all the track nu
-
I changed my apple ID and my iCloud on my iPhone will not recognize it
I changed my apple ID from one email account to a new one. It won't recognize new account on my phone and Icloud will not allow me to change the email address. I can't access anything on my Iphone because it won't pull up new Apple ID. How do I fi