Client machines losing connection to Leopard Server

I have a small office set up as follows: 20" iMac (Intel) running Leopard Server. 4 client machines, all Macs, All Intel, also running Leopard client. I have these machines connected to a Linksys 8 port 10/100 router...and then to a cable modem for Internet Access. The problem that I'm having is that the client machines lose connection to the server multiple times each day. A restart and reconnect seem to fix the problem...only temporarily. At first, I thought it might be the Linksys Router so I put a Gigabit switch in between the machines and the router with the same results. I have the router on a static IP of 192.168.1.2 and am not running DHCP, DNS, or any other services other than file sharing. If any of you have experienced this, I would greatly appreciate any direction you might have.
Thanks in advance.
Dan

It may be a 'typo' by you, but forget about 'appletalk' - this is not relevant to your problem (and pretty well redundant now). This looks like a TCP/IP issue.
What is doing your DHCP? Presumably you have checked to ensure that there is only the one dhcp server in your network, and another has not accidentally been enabled (on a server, router or airport). What is the dhcp range for the DHCP server?
Your post suggested that the servers, with static IPs, also 'drop off' the network. So a server IP cannot be pinged from a lan machine which has a correct IP assigned to it (rather than one which has a 169 address which obviously will not be able to ping it) ?
On your laptops, when connected via an ethernet cable, have a look at Network Prefs-> Show: Network Port Configurations. In what order are these? Specifically, I am wondering if Airport is getting prioritised above Built-in Ethernet and maybe there is a 'rogue' airport network which the laptops discover and attempt to join ahead of built-in ethernet.
-david

Similar Messages

  • How to get the IP of the client when TCP connect in the server

    How to get the IP of the client when TCP connect in the server.
    The only parameter got from the connection is connectionID.
    Solved!
    Go to Solution.

    I guess you're using "TCP Wait on Listener" on the server. This returns the remote address and port (as optional outputs).

  • Running maxl on client machine to connect to remote essbase server

    Hi All,
    I am able to connect to essbase on a client machine by using the link:
    http://ts119licalnn.ac.local:9724/easconsole
    However, when I try to log in via MAXL on the client machine, I get the following error...
    Essbase MaxL Shell - Release 11.1.2 (ESB11.1.2.2.100B2166)
    Copyright (c) 2000, 2012, Oracle and/or its affiliates.
    All rights reserved.
    MAXL> login JDOE JDOE212 on ts119licalnn.ac.local:9724;
       ERROR -     103 - Unexpected Essbase error 1030818.
       ERROR - 1042017 - Network error: Timed out before receiving all data.
       ERROR - 1030818 - Login failed. Please check if server and port are correct.
    If you received timeout or handshake failure, please check if you tried to conne
    ct to secure port without secure keyword or clear port with secure keyword..
    Is the host name in maxl the same name as the name in the easconsole link? do i need to set up anything (tnsnames.ora) for maxl to work?
    Thanks in advance.

    The essbase server name is ts119licalnn, it is shown under essbase servers in EAS.
    By not using the default Essbase node 'EssbaseCluster-1', it has revealed the port number EAS uses to connect to essbase, in this instance, 1443.
    The problem was that I did not have the correct port number, is there an easier way of finding the correct port number?
    Cheers,

  • Very Slow Internet Connection with Leopard Server

    I have build a new Leopard Server on a Dual G4 867 box, 1.38GB RAM, 10M external Ethernet Card on WAN side into ADSL router on 2Mbit/s connection where we have an 8 IP address range, nothing else contending for the bandwidth.
    When I down load a file using my Leopard client directly on one of our external WAN IP ports, I get maximum throughput from the links of the order of 200kBytes/sec. When I use the same client working through the Leopard Server, which is acting as a NAT firewall router, I get throughputs of less than 1/20th of that, e.g. 10kBytes/sec or less.
    I monitored the Leopard Server and it is under utilised in terms of CPU, RAM, disk I/O, port thruput, etc. I have also checked Activity Monitor and the whole machine is barely idling on resource usage, yet the throughput is abysmal.
    Can anyone give me any clues as to why this might be? Any thoughts on what else to check?

    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=6&PFid=6&Le vel=5&Conn=4&DownTypeID=3&GetDown=false
    They don't seem to have a 10.5 driver listed but Apple may have included one in Leopard (as in previous Tiger and Panther). You just "plunked" the card in?
    It does seem Apple has done some major overhaul when it comes to (ethernet) drivers as they now supports flow-control also at 10/100 Mbit. You have the interface (duplex) set to autonegotiate?
    Also my older Belkin (Broadcomm chip) "AirPort" PCI card only seems to be "semi supported" under Leopard as it is now reported as thirdparty but under Tiger it was udistingushable from a regular AirPort Extreme card.
    Maybe an update will fix this?
    Having said that the Realtek based cards isn't really know as the best working/quality ones.
    I have some older 10/100 Asanté cards laying around and a cheap Realtek 8169 (gigabit) based card I havent tried yet.
    I also noticed a soon two year old Intel iMac I got recently has a Marvell based ethernet interface so maybe other Marvell based cards would work in Macs (haven't really looked at what's present in Leopard driver wise). Marvell seems to get good reviews on Internet (SysKonnect cards). This iMac for example supports Jumbo frames and VLAN.

  • Client machine not reporting to wsus server

    My server Windows Server 2008 R2 Standard x 64 virtual machine install in Hyper-v server and Install SCE management version 2010.
    in sudden server stopped sending updated to client machine. So I check many and did many changed as per MS community forums. But still I have same issue. 
    Then I planned to install again SCE management server in different VM. But even though I am getting error that old SCE management server is existing in my domain.  Therefore I am afraid to change or remove any setting in AD since I have short
    of knowledge about SCE servers. 
    However my SCE server was working smoothly until 11-2013 and then suddenly stuck. When I check the server machine I found that local drive C: is getting full and SCE management is fail to start. So from that to now when ever I had free time I changed
    many things. But unfortunately I couldn't get the sever back to normal.
    Few changes which I made are below.
    - Remove and reinstall WAUS several times
    - Check online update and direct updated server SCE machine without getting updated from SCE
    - Remove dotnet frame work and updated version 4
    - product configuration wizard reconfigure
    - Repair management agent in client machine.
    Kindly help for me to repair my SCE server or make another installation without having change of settings.
    It would be highly appreciated if you could resolve issue
    The error massage is below in windows update log.
    2015-02-11 11:37:46:747 904 c78 Misc =========== Logging initialized (build: 7.6.7600.320, tz: +0300) ===========
    2015-02-11 11:37:46:747 904 c78 Misc = Process: C:\Windows\system32\svchost.exe
    2015-02-11 11:37:46:747 904 c78 Misc = Module: c:\windows\system32\wuaueng.dll
    2015-02-11 11:37:46:747 904 c78 Service *************
    2015-02-11 11:37:46:747 904 c78 Service ** START ** Service: Service startup
    2015-02-11 11:37:46:747 904 c78 Service *********
    2015-02-11 11:37:46:750 904 c78 Agent * WU client version 7.6.7600.320
    2015-02-11 11:37:46:750 904 c78 Agent * Base directory: C:\Windows\SoftwareDistribution
    2015-02-11 11:37:46:750 904 c78 Agent * Access type: No proxy
    2015-02-11 11:37:46:751 904 c78 Agent * Network state: Connected
    2015-02-11 11:37:58:940 904 8a0 Report CWERReporter::Init succeeded
    2015-02-11 11:37:58:940 904 8a0 Agent *********** Agent: Initializing Windows Update Agent ***********
    2015-02-11 11:37:58:941 904 8a0 Agent * Prerequisite roots succeeded.
    2015-02-11 11:37:58:941 904 8a0 Agent *********** Agent: Initializing global settings cache ***********
    2015-02-11 11:37:58:941 904 8a0 Agent * WSUS server: http://SCE-01.mubarrad.com.kw:8530
    2015-02-11 11:37:58:941 904 8a0 Agent * WSUS status server: http://SCE-01.mubarrad.com.kw:8530
    2015-02-11 11:37:58:941 904 8a0 Agent * Target group: (Unassigned Computers)
    2015-02-11 11:37:58:941 904 8a0 Agent * Windows Update access disabled: No
    2015-02-11 11:37:59:068 904 8a0 DnldMgr Download manager restoring 0 downloads
    2015-02-11 11:37:59:081 904 8a0 AU ########### AU: Initializing Automatic Updates ###########
    2015-02-11 11:37:59:082 904 8a0 AU # WSUS server: http://SCE-01.mubarrad.com.kw:8530
    2015-02-11 11:37:59:082 904 8a0 AU # Detection frequency: 22
    2015-02-11 11:37:59:082 904 8a0 AU # Approval type: Pre-install notify (Policy)
    2015-02-11 11:37:59:082 904 8a0 AU # Auto-install minor updates: No (User preference)
    2015-02-11 11:37:59:082 904 8a0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
    2015-02-11 11:37:59:082 904 8a0 AU # Will display featured software notifications (User preference)
    2015-02-11 11:37:59:301 904 c78 Report *********** Report: Initializing static reporting data ***********
    2015-02-11 11:37:59:301 904 c78 Report * OS Version = 6.1.7601.1.0.196880
    2015-02-11 11:37:59:301 904 c78 Report * OS Product Type = 0x00000007
    2015-02-11 11:37:59:313 904 c78 Report * Computer Brand = Microsoft Corporation
    2015-02-11 11:37:59:313 904 c78 Report * Computer Model = Virtual Machine
    2015-02-11 11:37:59:316 904 c78 Report * Bios Revision = 090004
    2015-02-11 11:37:59:316 904 c78 Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
    2015-02-11 11:37:59:316 904 c78 Report * Bios Release Date = 2009-03-19T00:00:00
    2015-02-11 11:37:59:316 904 c78 Report * Locale ID = 1033
    2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
    2015-02-11 11:37:59:352 904 8a0 AU Initializing featured updates
    2015-02-11 11:37:59:352 904 8a0 AU Found 0 cached featured updates
    2015-02-11 11:37:59:352 904 8a0 AU Successfully wrote event for AU health state:0
    2015-02-11 11:37:59:353 904 8a0 AU Successfully wrote event for AU health state:0
    2015-02-11 11:37:59:354 904 8a0 AU AU finished delayed initialization
    2015-02-11 11:37:59:354 904 c78 AU #############
    2015-02-11 11:37:59:354 904 c78 AU ## START ## AU: Search for updates
    2015-02-11 11:37:59:354 904 c78 AU #########
    2015-02-11 11:37:59:356 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
    2015-02-11 11:38:01:818 904 8a0 AU Triggering AU detection through DetectNow API
    2015-02-11 11:38:01:818 904 8a0 AU Will do the detection after current detection completes
    2015-02-11 11:38:03:808 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:03:808 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:03:808 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
    2015-02-11 11:38:03:808 904 1de0 PT + Caller provided credentials = No
    2015-02-11 11:38:03:808 904 1de0 PT + Impersonate flags = 0
    2015-02-11 11:38:03:808 904 1de0 PT + Possible authorization schemes used =
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 PT WARNING: PTError: 0x80072efd
    2015-02-11 11:38:03:808 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
    2015-02-11 11:38:08:092 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:08:092 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:08:092 904 1de0 Misc FATAL: SOAP/WinHttp - SendRequest: SendRequestUsingProxy failed. error 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 PT + Last proxy send request failed with hr = 0x80072EFD, HTTP status code = 0
    2015-02-11 11:38:08:092 904 1de0 PT + Caller provided credentials = No
    2015-02-11 11:38:08:092 904 1de0 PT + Impersonate flags = 0
    2015-02-11 11:38:08:092 904 1de0 PT + Possible authorization schemes used =
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig failure, error = 0x80072EFD, soap client error = 5, soap error code = 0, HTTP status code = 200
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: GetConfig_WithRecovery failed: 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshConfig failed: 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: RefreshPTState failed: 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 PT WARNING: PTError: 0x80072efd
    2015-02-11 11:38:08:092 904 1de0 Report WARNING: Reporter failed to upload events with hr = 80072efd.
    2015-02-11 11:38:08:093 904 1de0 Report REPORT EVENT: {62417852-380A-47BC-B153-8A8E0E198470} 2015-02-11 11:37:59:352+0300 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
    2015-02-11 11:38:08:098 904 1de0 Report CWERReporter finishing event handling. (00000000)
    2015-02-11 11:38:08:098 904 1de0 Agent *************
    2015-02-11 11:38:08:098 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-11 11:38:08:098 904 1de0 Agent *********
    2015-02-11 11:38:08:098 904 1de0 Agent * Online = No; Ignore download priority = No
    2015-02-11 11:38:08:098 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-02-11 11:38:08:098 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-02-11 11:38:08:098 904 1de0 Agent * Search Scope = {Machine}
    2015-02-11 11:38:08:440 904 1de0 Agent * Found 0 updates and 0 categories in search; evaluated appl. rules of 0 out of 0 deployed entities
    2015-02-11 11:38:08:441 904 1de0 Agent *********
    2015-02-11 11:38:08:441 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-11 11:38:08:441 904 1de0 Agent *************
    2015-02-11 11:38:08:441 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
    2015-02-11 11:38:08:441 904 edc AU # 0 updates detected
    2015-02-11 11:38:08:441 904 edc AU #########
    2015-02-11 11:38:08:441 904 edc AU ## END ## AU: Search for updates [CallId = {A05977D0-8D58-4DC1-AAC5-C5FD68987D7F}]
    2015-02-11 11:38:08:441 904 edc AU #############
    2015-02-11 11:38:08:441 904 edc AU Featured notifications is disabled.
    2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
    2015-02-11 11:38:08:442 904 edc AU Successfully wrote event for AU health state:0
    2015-02-11 11:38:08:442 904 c78 AU #############
    2015-02-11 11:38:08:442 904 c78 AU ## START ## AU: Search for updates
    2015-02-11 11:38:08:442 904 c78 AU #########
    2015-02-11 11:38:08:444 904 c78 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
    2015-02-11 11:38:08:444 904 1de0 Agent *************
    2015-02-11 11:38:08:444 904 1de0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-11 11:38:08:444 904 1de0 Agent *********
    2015-02-11 11:38:08:444 904 1de0 Agent * Online = Yes; Ignore download priority = No
    2015-02-11 11:38:08:444 904 1de0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-02-11 11:38:08:444 904 1de0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-02-11 11:38:08:444 904 1de0 Agent * Search Scope = {Machine}
    2015-02-11 11:38:08:444 904 1de0 Setup Checking for agent SelfUpdate
    2015-02-11 11:38:08:445 904 1de0 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
    2015-02-11 11:38:12:726 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
    2015-02-11 11:38:16:993 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
    2015-02-11 11:38:21:278 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: Send failed with hr = 80072efd.
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: SendRequest failed with hr = 80072efd. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <>
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab>. error 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Misc WARNING: DownloadFileInternal failed for http://SCE-01.mubarrad.com.kw:8530/selfupdate/wuident.cab: error 0x80072efd
    2015-02-11 11:38:25:564 904 1de0 Setup FATAL: DownloadCab failed, err = 0x80072EFD
    2015-02-11 11:38:25:564 904 1de0 Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EFD
    2015-02-11 11:38:25:564 904 1de0 Setup FATAL: SelfUpdate check failed, err = 0x80072EFD
    2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Skipping scan, self-update check returned 0x80072EFD
    2015-02-11 11:38:25:565 904 1de0 Agent * WARNING: Exit code = 0x80072EFD
    2015-02-11 11:38:25:565 904 1de0 Agent *********
    2015-02-11 11:38:25:565 904 1de0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-11 11:38:25:565 904 1de0 Agent *************
    2015-02-11 11:38:25:565 904 1de0 Agent WARNING: WU client failed Searching for update with error 0x80072efd
    2015-02-11 11:38:25:565 904 1de0 Report CWERReporter finishing event handling. (00000000)
    2015-02-11 11:38:25:565 904 edc AU >>## RESUMED ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
    2015-02-11 11:38:25:566 904 edc AU # WARNING: Search callback failed, result = 0x80072EFD
    2015-02-11 11:38:25:566 904 edc AU # WARNING: Failed to find updates with error code 80072EFD
    2015-02-11 11:38:25:566 904 edc AU #########
    2015-02-11 11:38:25:566 904 edc AU ## END ## AU: Search for updates [CallId = {B8E1001D-5C48-4A26-888D-99FECCD6F9F1}]
    2015-02-11 11:38:25:566 904 edc AU #############
    2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
    2015-02-11 11:38:25:566 904 edc AU AU setting next detection timeout to 2015-02-11 13:38:25
    2015-02-11 11:38:25:566 904 edc AU Successfully wrote event for AU health state:0
    2015-02-11 11:38:25:567 904 edc AU Successfully wrote event for AU health state:0
    2015-02-11 11:38:30:595 904 1de0 Report REPORT EVENT: {6470B8FE-1600-4F7B-807F-6031606ECC8B} 2015-02-11 11:38:25:564+0300 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072efd SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80072efd.
    2015-02-11 11:38:30:613 904 1de0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-11 11:38:30:613 904 1de0 Report WER Report sent: 7.6.7600.320 0x80072efd D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
    2015-02-11 11:38:30:613 904 1de0 Report CWERReporter finishing event handling. (00000000)

    Can you try the below to reset the authorization and force a connection back from one of the win 7 machines:
    it should help pinpoint exact issues. 
    1. Record the system time.
    2. Reboot the system (or restart the Windows Update service).
    3. After reboot run the command wuauclt
    /resetauthorization /detectnow.
    4. Wait 30 minutes.
    5. Post the entries from the WindowsUpdate.log starting at the time recorded in Step #1.
    Do you have any Windows 7 machines that are reporting? Are other machines with different operating systems reporting correctly?

  • Time Machine backup on OSX Leopard Server, no user logged in

    Hi
    I'd like to use Time Machine to do backups of a Mini running OSX Leopard Server. It has a TimeCapsule connected, which it backs up to fine, at the moment.
    However, I've been wondering, if it still backs up, if no user is logged in? I've been reading a few old tips about making removable drives not dismount, when no user is logged in by adding/modifying a key in /Library/Preferences/SystemConfiguration/autodiskmount.plist, setting AutomountDisksWithoutUserLogin to true.
    Is this still nescessary?
    Is TimeMachine actually running when no user is logged in?
    Is it a good idea to set the key, if my users homedirs is on a removable drive too?
    If TimeMachine is NOT the way to do it, which way is the best/smartest?
    Best regards
    Nicolai

    When reading my report, I forgot to mention how the external hard drive is formatted :
    Hard Drive FW/USB:
    Manufacturer: LaCie
    Model: 0x0
    GUID: 0xD04B78070AD64B
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Hard Drive FW/USB Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x110
    Product Revision Level:
    Sub-units:
    Hard Drive FW/USB SBP-LUN:
    Capacity: 298.09 GB
    Removable Media: Yes
    BSD Name: disk1
    Mac OS 9 Drivers: No
    Partition Map Type: APM (Apple Partition Map)
    S.M.A.R.T. status: Not Supported
    Volumes:
    Aristotle:
    Capacity: 297.97 GB
    Available: 164.85 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /Volumes/Aristotle
    Raf

  • Recent problem: clients are losing connection to AMS 5.0.1

    For the past week, since Oct 14, we've been having issues with clients losing connection to our AMS application. We have online classes that include a chat room and sometimes an audio stream from the instructor. This application and its server has been running stable for months... until last week.
    One of our staff was connected to the app, getting everything set up for a class, and she started complaining of getting disconnected. I looked in the application logs and noticed that the application.onDisconnect was being triggered. However, the client didn't register that it had been disconnected  for several seconds afterward. She let me know when she got the "Diconnected" message on her screen, which comes from the NetConnection.onStatus handler.
    The only other sign of a problem is that in the server's core logs we started getting the following error when we checked bandwidth:
    > Invalid command message data: unexpected bw response from client 000000001D670170
    The client number changes frequently, so I'm guessing that this is first happening to one person and then another. We don't think that this bandwidth check is causing the disconnects because we rolled back to a previous version that didn't have it. The disconnects still happened after using the old version. What makes it frustrating is that it hasn't happened to anyone on the dev team, regardless of which network we've connected from. Also, the code hasn't changed on the client or the server, and to my knowledge, we're still using the same configs for months.
    The AMS is v5.0.1, the client is written is AS2 and targets Flash Player 11.4.
    The affected Flash Players reported are 15.0.0.152 and 15.0.0.189, in browsers IE, Firefox, and Chrome, but not all installations are affected.
    Is there anything else I can look at to determine what the problem is? Does anybody have any insight as to what might be suddenly affecting our AMS app?
    Many thanks,
    Nick

    Yes, we came to the same conclusion about the unexpected bw. We realize that it is not causing the issue, but I included it because it started happening at the same time and thought that they might be caused by the same issue.
    We have been trying to come up with what changed to cause this, and aren't coming up with anything.
    We have been on 5.0.1 for at least 5 months, no changes there.
    We haven't updated the main.asc since 9/16.
    The VM that runs our server is still the same, and AMS config files haven't been touched.
    The client swf had a change 2 weeks ago, but we've reverted the change and are now using the old swf again.
    The person who initially reported the problem was using the same computer that she's used many times to connect; she was going through her usual process to set up for the session.
    You mentioned bad network, and that is another thing that I have been looking into, but our IT department says that we haven't seen any huge increase in bandwidth usage, and that everything looks to be within normal operating ranges
    If there are any other points that you can think of that I could check for changes, I'm open to suggestions. This problem has been ongoing for 6 days, and I have been searching for answers since it started.

  • Server 2008 TS - some client could not connect to the server

    Hi guys,
    I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
    I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
    "Because of a security error, the client could not connect to the remote computer.
    Very that you are logged on the network, and then try connecting again."
    I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
    http://support.microsoft.com/kb/2477176/hu
    (These scanners can connecto to another Terminal Server.)
    Is it client or server-side issue?
    Have you another idee?
    Regards,
    Gabor

    Hi,
    Thank you for posting in Windows Server Forum.
    Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
    setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server. 
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
    You can also refer below article for additional information.
    How to resolve the issue “Remote Desktop Disconnected” or “Unable to
    Connect to Remote Desktop (Terminal Server)”
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Will Windows Outlook clients be happy with Snow Leopard Server Mail Server?

    Our network at work has a Windows SBS 2003 server - and 40+ XP PCs running office 2003 (and outlook 2003).
    Can I set up Snow Leopard Server so that the Outlook 2003 clients will be able to use contacts, calendars and mail etc from the mac (mini) that we would purchase for this?
    I'd love to get everyone on Mac here, but we can't cos our core application is windows only and we would still need the MSSQL server. I know - we could install parallels or virtualbox for the windows apps but that is extra expense, and tbh I don't think our users could cope.
    Thanks

    Hi
    +"Can I set up Snow Leopard Server so that the Outlook 2003 clients will be able to use contacts, calendars and mail etc from the mac (mini) that we would purchase for this?"+
    For mail yes. For calendars you will need 'assistance' using 3rd-party applications or helper utilities. The iCal Admin manual has more details of what is available:
    http://manuals.info.apple.com/enUS/iCalServerv10.6.pdf
    Page 12. For Addresses/Contacts consult the Address Book Server Admin Manual for more details:
    http://manuals.info.apple.com/enUS/AddressBkServerv10.6.pdf
    Page 12. I don't see anything specifically listed so you may have to search for these yourself unless someone else posts with something more specific that works?
    If you're expecting Exchange-like functionality you will be disappointed. If you really must have the functionality you're used but also want to move to the mac platform a better prospect (IMO) would be Kerio Mail Server:
    http://www.kerio.com/connect
    Depending on what other services you may or may not want you may not necessarily need OSX Server? Then again you could as easily install KMS on a Windows or Linux box instead. In which case why swop from Exchange?
    Tony

  • Can you write an excel file on client machine instead of on the server

    I am trying to user cfSpreadSheet functon. The first question I have is, can you write the file on a client machine? I tried but they all end up on the server drive. Scecond question, is there a way to do row and column range formating in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion server version 9.01.
    Thanks.

    To expand on Dan's answer: CF doesn't have any interaction with the client browser at all: client->server comms are handled by the client and the web server; the web server simply asks CF to provide the response data if the file requested is a CF file.  But even then all CF does is process the requested file and return data to the web server.
    Also, one of the restrictions of the HTTP protocol is that that there is *no* *way* that the server can write to the client machine.  All it can do is send data to the client agent (eg: a web browser) in response to the client agent requesting it.  Can you imagine the sort of security problems one would open one's self up to if a remote web server could write to your PC????
    Adam

  • Win7 clients can't connect to OSX Server after 10.10.2 and Server 4.0.3 update

    I'm troubleshooting an annoying issue with our Yosemite fileserver at work and hoping someone has suggestions.
    The server is running Yosemite, clients a mix of MacOS from 10.6 through 10.10, and some Windows 7 boxes.
    With the server on 10.10.1 and the just-prior version of Server (4.0, I assume; were 4.0.1 and 4.0.2 ever available to the public?), everything basically worked. Last night, I updated the server to 10.10.2 and 4.0.3.  Nothing unusual during the update apart from a bunch of spotlight indexing processes running as individual users sucking up a lot of CPU for the first few minutes, which may be normal.
    However, now almost all the Macs are fine, but the Windows clients are all getting permissions errors when trying to connect. Even weirder, one Yosemite client was also getting an error on login when trying to connect via SMB, both on 10.10.1 and 10.10.2; the same computer connecting via AFP works fine.
    I'm inclined to think that it has something to do with the switch to SMB3 mentioned in the changelog for Server 4.0.3, although I'm not 100% sure that didn't exist under 4.0 as well, and if this is the problem I'm not sure what to try to fix it.
    I'm already aware of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel needing to be at least 3 (or non-existent, so it defaults to 3 on Win7) to work with Yosemite; these clients already have that registry key set. Suggestions?

    Addendum:  I just realized that the Windows users *can* see their own home folder when they connect to the server without the main share I'm trying to mount specified.  So it's not that they're completely unable to connect, it's just that the server isn't offering them any of the main share when they do.
    When I tried mounting the server from 10.6 manually forcing SMB (with an admin user, no less), I got the same thing--just my user folder, none of the main shared volumes...

  • Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

    I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
    unavailable"
    PS I tried a lot of solutions from different articles, but the same result. 
    presented below my environment: 
    Two Lync 2010 frontend servers with one pool.
    Two edges server.
    HW load balancer.
    Log from Lync connectivity analyzer.
    User Name: [email protected]
    Logging test parameters:
    SIP Uri: [email protected]
    Discovery Type: Automatic Discovery
    Network access: NetworkAccessExternal
    Selected client: ApplicationLyncMobile2010
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Sending HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured internal channel against
    https://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Sending HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured internal channel against
    http://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for secure (HTTPS) external channel
    Sending HTTP request to
    https://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured external channel against
    https://lyncdiscover.xxx.com/
    Starting automatic discovery for unsecure (HTTP) external channel
    Sending HTTP request to
    http://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured external channel against
    http://lyncdiscover.xxx.com/
    None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
    MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
    Automatic discovery of the Lync server failed. Please verify the server requirements at
    http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
    Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

    Hi 
    Is that Port 443 opened? check the fire wall.
    is that external Lync clients are logging in with out any issues.
    by seeing the Log it is unable to connect on port 443
    Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
    to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting the Mobility issues follows this
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Addon in Client is not connecting to SQL Server 2005

    Hi, we have an add-on, which is working in SBO 2005 with SQL Server 2000.
    When the addon tries to connect to the same DB, restored on a SQL Server 2005, the addon is hanging up on the oCompany.Connect method. But this only happens when we try a remote connection from a SBO client.
    If we run the addon from the SBO server, where the SQL Server is running too, the addon completes the connection in the expected way.
    The SBO Client is connecting to the server, and works fine, but the addon is not connecting to the server.
    We try to connect to the server from the client, using SQL Query Analizer from SQL Server 2000, and it works fine too.
    Does anyone knows how to fix this issue?
    Thanks

    Hi Alejandro, thanks for your response.
    After installing SBO Patch 20 the add-on is now connecting fine, so I think it must be an upgrade on the new DI API. I noticed the version changes from 6.80.318 to 6.80.319
    I had checked the SQL to confirm is was allowing remote connections.
    Thank you guys.

  • ESSBase Studio - Client is not connecting to Studio server

    Hi All,
    When I try to connect to Studio server from console, I get error "invalid login credentials" and unable to login. Below is the error log. Kindly advice me.
    server.log
    14:36:36 02/11/10 INFO Starting up
    14:36:36 02/11/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009
    14:37:45 02/11/10 (system) WARNING Failed to load driver for sap
    14:37:46 02/11/10 (system) SEVERE Cannot load Teradata connector
    14:37:46 02/11/10 (system) WARNING Failed to load driver for teradata
    14:37:46 02/11/10 (system) WARNING Failed to load driver for mysql
    14:37:46 02/11/10 (system) WARNING Failed to load driver for netezza
    14:37:49 02/11/10 INFO Logging to com.hyperion.cp.util.JettyLogger@6080669d via com.hyperion.cp.util.JettyLogger
    14:37:49 02/11/10 INFO jetty-6.0.1
    14:37:49 02/11/10 INFO Started SocketConnector @ 0.0.0.0:9080
    14:38:22 02/11/10 INFO Connection established with remote client: '/10.1.126.94:3265'
    14:38:28 02/11/10 INFO Connection established with remote client: '/10.1.126.94:3266'
    SharedServices_Security_Client.log
    2010-02-11 14:36:37,438 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
    2010-02-11 14:36:37,454 INFO [main] CSS Log file will be generated at C:\Hyperion/logs/esbstudio\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
    2010-02-11 14:36:37,470 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    2010-02-11 14:36:37,470 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
    2010-02-11 14:36:37,532 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
    2010-02-11 14:36:38,751 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
    2010-02-11 14:36:39,236 INFO [main] Got hub location from Registry:http://fdms.infotech.com:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
    2010-02-11 14:36:39,392 INFO [main] Got native directory location from Registry:rw015727.infotech.com:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
    2010-02-11 14:36:39,392 INFO [main] URL constructed out of values in Registry database:ldap://rw015727.infotech.com:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
    2010-02-11 14:36:40,220 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
    2010-02-11 14:36:42,502 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:43,502 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:43,502 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:36:43,502 WARN [main] Native Directory is not reachable. Attempting to re-connect... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:36:43,502 WARN [main] Number Format Exception converting nullto int; Returning default value 10[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
    2010-02-11 14:36:43,502 WARN [main] Number Format Exception converting nullto int; Returning default value 3[Root Cause: null ] com.hyperion.css.common.CSSUtils.toInt(Unknown Source)
    2010-02-11 14:36:45,456 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:46,440 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:46,440 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:36:46,440 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:36:49,441 WARN [main] Attempting to connect to Native Directory: Retry Count: 1 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:36:51,379 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:52,457 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:52,457 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:36:52,457 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:36:55,458 WARN [main] Attempting to connect to Native Directory: Retry Count: 2 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:36:57,489 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:58,474 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:36:58,474 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:36:58,474 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:01,474 WARN [main] Attempting to connect to Native Directory: Retry Count: 3 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:03,506 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:04,506 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:04,506 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:04,506 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:07,507 WARN [main] Attempting to connect to Native Directory: Retry Count: 4 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:09,413 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:10,507 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:10,507 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:10,507 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:13,508 WARN [main] Attempting to connect to Native Directory: Retry Count: 5 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:15,430 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:16,430 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:16,430 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:16,430 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:19,431 WARN [main] Attempting to connect to Native Directory: Retry Count: 6 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:21,463 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:22,432 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:22,432 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:22,432 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:25,432 WARN [main] Attempting to connect to Native Directory: Retry Count: 7 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:27,480 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:28,464 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:28,464 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:28,464 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:31,465 WARN [main] Attempting to connect to Native Directory: Retry Count: 8 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:33,387 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:34,575 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:34,575 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:34,575 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:37,575 WARN [main] Attempting to connect to Native Directory: Retry Count: 9 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:39,732 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:40,810 ERROR [main] 27:1112:Failed to connect to rw015727.infotech.com at 28089.[Root Cause: Connection refused: connect ] com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    2010-02-11 14:37:40,810 WARN [main] Failed to instantiate provider for factory: com.hyperion.css.spi.impl.nv.NativeFactory.[Root Cause: 27:1112:Failed to connect to rw015727.infotech.com at 28089. ] com.hyperion.css.spi.CSSManager.getProvider(Unknown Source)
    2010-02-11 14:37:40,810 WARN [main] Native Directory is not reachable. Will try to re-connect after 3 seconds... com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:43,811 WARN [main] Attempting to connect to Native Directory: Retry Count: 10 com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:43,811 ERROR [main] 20:3008:Failed to connect to native directory. com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
    2010-02-11 14:37:43,811 ERROR [main] Arguments: param1={LOCALE=en_US}, param2=null, param3=C:\Hyperion/logs/esbstudio, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
    Best,
    Veerannna Ronad.

    Hi Manaf,
    Seems you are also facing same problem. This problem comes when shared service failed to start. There is dependency with OpenLDAP. OpenLDAP service most of the time gets corrupted. You need to recover this service. There is a recover exe located at <<Hyperion installation folder>>\products\Foundation\openLDAP\var\openldap-data\db_recover.exe, run this and start the Essbase services in sequences.
    Service starting sequence:
    1) Hyperion Foundation Shared Services - Web Application
    2) Hyperion Essbase Services 11.1.1 - hypservice_1
    3) Hyperion Administration Services - Web Application
    and rest you can start as required.
    This should solve your problem.
    Best,
    Veeranna Ronad.

  • Mac10.x client can't connect to File Server on Windows2008 Failover Cluster

    Installation of a cluster was made according to the document "Failover Cluster Step-by-Step Guide: Configuring a Two-Node File Server Failover Cluster " http://technet.microsoft.com/en-us/library/cc731844.aspx.
    My Mac OS X 10.5.2 and Mac OS X 10.4.11 clients be able to connect to a non-cluster file server on a Windows 2008 (the File Services role) and also to old file cluster on a Windows 2003.
    Why Mac clients can't connect to Windows 2008 Failover Cluster?

    Are you running a firewall on the Macs. If yes does it work with out the firewall? If it works with out the firewall that means you will have to create a custom ipf rule which includes the both the physical an virtual IP addresses of your cluster.

Maybe you are looking for

  • Very slow calendar sync with Outlook 2010 users.

    Hi guys. My company is running Office 365 with hosted Exchange. Most clients are using Outlook 2010 and are reporting that when trying to access shared calendars, all operations are incredibly slow and can take up to a few minutes to show any calenda

  • Can I create a custom-scripted dynamic stamp in Acrobat Standard or do I have to buy Acrobat Pro?

    I am researching options for the company I work for to take it's invoicing system paperless and I need to know if I can create a custom-scripted dynamic stamp in Acrobat Standard or is that possible only in Acrobat Pro?

  • Wpf open PDF file in Adobe Reader with a click on a button

    I need a button to open a PDF file with Adobe Reader. I have the following code but it does not work. The file is inside Books folder on my application. private void openPDF(object sender, RoutedEventArgs e) try System.Diagnostics.Process process = n

  • Lost ADF Projects when deploying BPM 11g project

    I've run this across a couple other people who are using Oracle BPM 11g. Both have run into the issue but aren't sure what they did to fix the issue. I've been able to successfully deploy the ADF projects in my project successfully until this afterno

  • Locking objects in nested collections

    Hi, I am looking at having a data store in memory which will be made up of nested collections e.g. a hashmap whose values are hashmaps. This data store will be accessed by multiple threads and to avoid threading issues on updates I realize I have to