Client need to be opened for what all objects?

Hi Experts,
I need to list all the objects for which clients need to opened for customizing/master data download, for ex. when we are downloading condition records we need client to be in open/modifiable state, So what I need now is suggestions based on your experience wherever you feel that cleint needs to be opened for this activity .
Thanks for sharing your experience.
With Regards,
Mayank Choudhary

Hi Mayank,
Even I tried for the list of all cross-client download objects in vain. I figured a work around for this and found it helpful.
To check wether a particular object is downloading cross-client data:
1) Determine all the tables involved by executing CRM table SMOFTABLES with the adapter object name. (Ex: DNL_CUST_SHIP downloads data from the following tables: TINC, TINCT, TPRIO, TPRIT, TVSB, TVSBT.)
2) In order to check wether these tables are cross client or not, execute table DD02L in R/3 system with all the tables determined in step 1.
Ex: DNL_CUST_SHIP
Table  : DD02L
Table name----
Client-specific
TINC----
X
TINCT----
X
TPRIO----
X
TPRIT----
X
TVSB----
X
TVSBT----
X
This means that none of the tables invloved in DNL_CUST_SHIP download are cross-client and can be downloaded without opening the client.
If there are any client independent tables involved then we need to open client and perform download.
Ex. DNL_CUST_CNDALL
The below mentioned tables are involved in DNL_CUST_CNDALL object download and are cross-client and hence the client needs to be open while downloading the object.
TMC1K
TMC1D
TMC1
T681
T682
T682I
T682T
T682Z
Hope this helps
Regards,
Aj K

Similar Messages

  • What TCP/UDP ports need to be open for VPN Client version 4.8?

    What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
    Thanks,

    Normally, you need the following ports and protocol :
    UDP 500
    UDP 4500
    ESP
    In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
    -Kanishka

  • What ports need to be opened for Podcasting?

    To all,
    I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
    FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
    Any help is greatly appreciated. Thank you in advance.
    zanm
      Other OS   windows NT server

    Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

  • Does Mail need to be open for emails to appear in Notifications?

    I love the notifications feature in Mavericks, and in particular, I like that incoming emails pop up like in iOS. My question is, does Mail app need to be open for emails to appear in Notifications?

    On the Mac, Mail needs to be open to be notified of incoming Mail. I tend  to leave the app open all the time, just collapsed into the Dock, getting notified by Notification Centre as emails arrive and leaving a red badge on the Mail icon in the Dock if Mail arrived whilst I was away.

  • Which ports need to be open for messages and facetime to work properly?

    I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
    I'm behind my work firewall, which ports need to be open for messages to work properly?

    Just make sure your 9001 port is open.
    Hope this works..
    Hamid

  • What is the Firewall ports need to be open for TED distribution working properly

    Hi ,
    May I know what ports need to be open at the firewall in order the TED
    distribution to be working properly.
    I suspect it is firewall problem because the inventoried server which
    is install at the same segment with the TED distributor server, I manage to
    push the policy and collect inventory data , but for those inventoried
    server which is install at the remote site, I fail to push the TED into the
    server. At the TED distributor server, the log say that computer refused
    connection. And there is a firewall in between the TED distributor server
    and the remote inventoried server.
    Thank you.
    Steven Foong

    TED is using 1229
    Ron
    <[email protected]> wrote in message
    news:X7lAe.2193$[email protected]..
    > Hi ,
    >
    > May I know what ports need to be open at the firewall in order the
    TED
    > distribution to be working properly.
    >
    > I suspect it is firewall problem because the inventoried server which
    > is install at the same segment with the TED distributor server, I manage
    to
    > push the policy and collect inventory data , but for those inventoried
    > server which is install at the remote site, I fail to push the TED into
    the
    > server. At the TED distributor server, the log say that computer refused
    > connection. And there is a firewall in between the TED distributor server
    > and the remote inventoried server.
    >
    > Thank you.
    >
    >
    > Steven Foong

  • Which ports and ACL ( servers) need to be opened for Jabber Video

    Hi All,
    We are Cisco partners ( ODC at Aricent New Delhi India)  working for multiple Cisco projects.
    We want to use Jabber Video for communication but as partners ACL ( Server/ports ) need to be opened to access the Jabber video servers.
    Can somebody list me all the Jabber Server/Ports to which Jabber client need access to.
    Can somebody please respond asap as we have opened an EXAM case for opening the ACL and need the list asap.
    Thanks
    Saurabh    

    Thanks Hoan for the quick reply it answers part of my question.
    I also want to know for succeessful video calls which all servers i need access to for eg first it tries on
    https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
    then it goes to another server's for logging in etc.
    I  want to know the list of all servers so that ACL's can be opened for them.
    Thanks
    SAurabh    

  • Does calendar app need to be open for iCloud sync?

    Hi @all,
    I was just wondering the following about the sync function with iCloud: When I add a new calendar entry on my MacBook will it be pushed automatically to my iPhone from the cloud without having the actual calendar app open on the iPhone? I am asking because I am not frequently connected to a data network so what happens with this new entry in my calendar? Let's say I connect to a data network but don't open the calendar app. I leave the data network connection open for a while and then close it. After closing the data network connection I open the calendar app but the new entry does not appear. Will the new entry be synced to my iPhone only when I open the calendar app and only when I am connected to a data network at the same time?
    Thanks
    Martin

    Define background.  Do you mean the app open but minimized or app is actually not open.  I have photos in my dock for quick access.  It is closed and does not have the dot underneath showing it is open but minimized.  If the app is completely closed is iCloud working in the background upload/downloading photos?

  • Ports that need to be Opened for OBIEE 11g Installation on Solaris Box

    What ports need to be opened by the systems admin on a solaris box to start OBIEE 11g installation

    There is lot difference what you said now and in your initial post...
    For outside communication means? you want to access BI outside the network using url?
    in that case is it not weblogic port? check with your network guys they'll take care of it.
    if you are looking for network with other systems internally then you may/have to open as per that link.
    hope this helps

  • Do router/firewall ports need to be opened for higher bandwidth?

    Currently I use iChat between myself and my mom across town with decent results. The video is blurred but extremely smooth.
    We are both on broadband with different ISPs (Telus & Shaw) with our own routers. None of the ports on either router are open for iChat yet we connect fine.
    If I opened up iChat ports on both routers will that allow more bandwidth to flow through the video resulting in less blur?

    Hi
    No it will not give any more bandwidth, seeing you have iChat working i would leave the ports alone
    Have you both set the Quicktime settings, goto sys prefs/quicktime/streaming/streaming speed set what you get from your ISP go no higher then 1.5mbps(dont use automatic)
    In ichats prefs click on video and change bandwidth limit to NONE.
    Restart iChat.
    Tony

  • For What RF Object Organizational Management

    Hi!
    The object RF-Reference Force Element for what can be used in Organizational Management?
    Kind Regards,
    Julian.

    Hi,
    Reference Force Element:
    Contains a one- or two-character code that represents different types
    objects, for example, 'S' for position, 'Q' for qualification and 'E'
    for business event.
    In create, change, display, list or delete mode, use this field to
    identify the type of object you want to work with. To do so either:
    o   Enter the appropriate code
    o   Request a list of object types and make a selection
    Exmple
    S represents a position, Q represents a qualification, E represents a
    business event, and so on.

  • What ports need to be open for device enrollment?

    I'm able to install the trust profile on an iPhone, but when I attempt to "Enroll" my device and I click "Install" it begins the process,
    Installing Profile, Generating Key, Enrolling Certificate and gets stuck and reports a network issue.
    I'm also hoping we can get our hands on some proper lion documentation. The resource page is pretty bleak right now.

    Yea they should have that info on the kbase.   I have been reading up on this as well, as my clients never worked and finding out you need ports open.
    I believe this is correct, if not someone correct me:
    Ports for Profile Manager - 2195, 2196, 5223, 1640, 80, 443   Apple Server block to open too:  17.0.0.0/8
    TCP Port 2195 and 2196 should be "oubound" from Profile Manager Server to 17.0.0.0/8.
    TCP Port 5223 "outbound" from LAN for clients to 17.0.0.0/8
    TCP Port 443 and 1640 "inbound" to Profile Manager server.  I would think port 80 as well, but any login I would put a cert on and use only 443.  Not sure if 80 is really needed.

  • Why does my firefox 6.0.1 go not responding every time I open a second tab? I need to have more than 1 tabs open for what I'm doing.

    Details: I open browser to go to page. From there I open second page which I've always been able to do and it won't load. It says no responding and sits there forever deciding what to do. Then it will finally say something about stop running script, which I just let it run or x it out. Either way, it shuts down or it might load or just sit there. I've always loved firefox but I'm it's upsetting me as I can't do things on my computer now I need to do.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Need alternative port open for VIPs on ACE

    My ACE is almost completely configured - with VIPs, farms, real servers, redirects etc. Port 80 and 443 are working as expected and web requests are getting routed appropriately.
    The need has arisen however, to allow a non-traditional port to be allowed/open to certain websites (to certain VIPs). (As some background - this is an SFTP style client based connection. ) 
    My ACL configuration is open - ip any any - but i even created one specific to this port number. (let's just say it's 7777 for now). I've done captures on the firewall to make sure that traffic from external requests is getting through it, and when I try to connect to the real server address (either NATed or internally), it connects just fine. I am unable to see the connection attempts in the logging on the ACE and the error message that the client app gets is "connection refused"
    I'm not good with policy maps or class maps, so I'm not sure if that's where I need to be looking. I suppose that the issue is at the VIP level though since the server IPs work fine, so I need to understand what gets processed via that IP that doesn't via the others.
    So if I currently have websites on the ACE configured to accept, redirect, and loadbalance for port 80 and 443, but I now need them to do the same on port 7777, what changes need to be applied and where?
    I can paste any config info if someone can help me. Thanks.

    Good afternoon,
    This new port would be a completely new VIP, so, you would need to create a new class-map for it.
    Daniel

  • Can I leave the display open for say all day while downloading torrent file

    Sometimes it takes all day to download a torrent file can i leave the display on or should i turn it off and will my macbook keep downloading the file thank you

    It's fine to leave it on but you can also just set the display to go to sleep and let your computer keep working. The settings are under *System Preferences* in *Energy Saver*. I usually have mine turn off after 15 minutes so it will rest while my download or other work continues.

Maybe you are looking for