Client non-modifiable Warning while execution of RFC

Hi All,
When we execute the RFC in our Test server, I am get following warning. This function module is trying to update the HR infotype data. As this is Test client, it is non-modifiable (from config point of view).
But why its throwing warning, when we change masterdata? Same thing is working fine in Production Server which is also non-modifiable. Please suggest the solution - Regards, Vinod
Message no. TK430
Diagnosis
The system administrator has set your logon client to the 'not modifiable' status.
Client-specific objects can not be changed in this client.
System Response
The function terminates.
Procedure
Contact the system administrator.
For more information, see the SAP Library under Change and Transport System.

Hi Sandeep,
Thanks for the reply, but I couldnt find any namespace properties for HR infotype objects.
Can you please specify the exact path.
Thanks- Vinod

Similar Messages

  • Client not modifiable message while executing t-code ops7 and ops6

    Hi Guru's,
    I am getting "Client not modifiable message while executing t-code ops7 and ops6" in Unit test and Quality client.
    Pleae help me to resolve the error.
    Regards
    Sasikanth Reddy

    Hi
    Copy of the information I found regarding this issue:
    It is possible to allow the maintenance of 'Customizing'-tables in a       
    production client, even if the client is set to 'not modifiable'.          
    Normally this should be the case for tables TCJ04 (responsible person)     
    and TCJ05 (applicant).                                                                               
    Please could you check the settings in your system and change it if        
    necessary:                                                                               
    Transaction SE11:                                                                               
    Table TCJ04: delivery class should be set to 'C'                           
          TCJ05: delivery class should be set to 'C'                                                                               
    Transaction SOBJ -> Maintain                                                                               
    Position on V_TCJ04: Category should be 'CUST' field 'current settings'    
    should be marked.                                                                               
    Position on V_TCJ05: Category should be 'CUST' field 'current settings'                                                                               
    Please also check that your client is defined as 'PRODUCTIVE' via          
    transaction SCC4 (field client role).                                                                               
    I would also recommend that you review the attached notes with reference   
    to the usage of customizing setting "current settings": Nr. 77430,         
    Nr. 135028, Nr. 356483. These are also relevant for your release.          
    Kind regards,
    Zhenbo

  • Problem releasing webservice for runtime in non-modifiable client

    Hi
       I created a webservice definition ( virtual interface & all dependent objects )  in a development client ( client- A ) of a ECC5.0 instance.
    Now, we have another client ( client-B ) in the same server that we want to release the webservice for SOAP runtime. ( reason is that the webservice is not available at runtime in this client-B client )
    This client-B has status - non-modifiable and hence cannot use WSCONFIG --> create option to release it for runtime.
    How do we release this webservice definition to client - B . I tried a SCC1 transaction on client-B pointing to the transport that contains the WS definition in client-A. I got dictionary errors indicating that the WS definition objects are all client independent.
    Is there something I am missing ? Any thoughts/similar experiences shared is appreciated.

    Good to hear it worked out for you. But like I already said, I haven't experienced anything like this, but for similar problems this is exactly what we did to solve it. But you're probably right, that this is no long term solution. There should be another way of doing this, but no experience in that field expertise.

  • Client Settings non modifiable for  ob52, ob58 etc

    Certain objects in the IMG need to be modifiable in all our clients, specifically transaction OB58 (maintain financial statement version).
    Currently, any updates to the standard financial statement (for example, when a new G/L account is created and it does not fall in an existing range) have to be made in the config client and transported across.  However, the Financial statement version is not real config, nor is it master data, and we should be able to update it as and when G/L accounts are created.
    We can do this in Production but not in our QA clients (it says the client is non modifiable), Production client is also non modifiable but the client role is 'Production', so I presume this client role allows the changes in the operation client.
    Is there anyway to modify these in a client that is non modifiable such as our QA and testing clients with making the client modifiable?
    We are running ECC 5 on NW04.

    .

  • How to make a BW system non-modifiable?

    Hello,
    How do i do that? Also what if i have to keep only the infopackages open for creation?
    Regards,
    aby

    Hello Abhijit
    To make a SAP BW system non-modifiable you have to do at least the following:
    1. TCODE SCC4 --> double-click on your client --> Changes and transports for Client-specific Objects should be set to “No changes allowed”.
    2. TCODE SE06 --> click on System change option (you have to have the necessary authorization, or else you can not see the button at top) --> Set the global settings to non-modifiable (Be careful here: <b>a.</b> Software Component <i>"LOCAL"</i> has to have the status modifiable – read more about it in the section about transports on help.sap.com. <b>b.</b> I will suggest that you take a snap shot of your settings before changing them to non-modifiable.)
    3. Regarding your question about InfoPackages I will suggest that you watch Luis Orama's e-learning session about BW transports on this site. But a quick answer to your question is that this is possible.
    TCODE RSOR (Transport Connections) --> Click on "Object Changeability".
    Good luck
    /FZA

  • Production client in  modifiable stage even after client is closed.

    Dear All,
    I observed in my system that production client settings of spro is modifiable even after the client is closed.Can you suggest where the problem would be.Where as with same settings (of even customising client closed I m not able to modify in DEV).
    Please suggest.
    Regards,
    Amit

    Hi,
    Cross Client and Customizing Settings should not be allowed and No Changes allowed.
    At same time check in Se06, system status should be non-modifiable.
    Thanks
    Sunny

  • Finding an error while calling an RFC

    Hi,
      My requirement is as follows.
    The internal table(ITAB) which i am using has a field X  of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
    While executing it i am getting the error 'Interface data error'.
    please let me know why this error is getting populated.
    Regards,
    Sumi

    Hi,
      I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
      I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
    I am getting error while calling the RFC.
    Regards,
    Yamini.A

  • Error while calling up RFC Message No. UPC202

    Hi Experts,
    Calling Thru Trans code : BPS0 in ECC6.
    Getting This Error :
    Error while calling up RFC message No. UPC202.
    After i check in BW with Trans code : ST22
    Following this error message:
    Category  Internal Kernal Error
    Runtime Errors  PARAMETER_CONVERSION_ERROR
    Application Component  BC-MID-RFC.
    More details Please find attached file.
    Thanks & Regards,
    Mohammed Kaleem.

    Hi Mohammed,
    If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
    Also you can raise this with your Basis team who should be able to help you out with the same.
    Thanks & Regards,
    RDS

  • Error while calling up RFC

    Hi GuRuS,
               I am working on BI 7.0. When I open the BPS workbench using Transaction bps0 and select the planning area 4TPM9000, and click on either "Variables" tab or "Master Data" tab or when I click on "Adhoc Package", I get this error " You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated: Error while calling up RFC. " 
    FYI I have done RFC connections between my CRM 2007 system and BI 7.0 system using Tr.SM59 and checked the connections from both the ends and it is working fine. So, pls show me the way out.
    Thanks in advance,
    Raghu

    Hi...
         The roles SAP_ALL and SAP_NEW are assigned for the RFCUser.
    Regards,
    Raghu

  • Warning while opening a report

    Hi I am getting a warning while i try to execute a report.
    The warning says "warning following error for partial InfoCube = 0PCA_C01 in RSDRC_CUBE_DATA_GET_RF, Error SQL Error:1578"
    Can any one tell me what the issue is and the possible solution ?
    Regards
    Arjun

    Hi,
    If it is just a warning and if you are able to execute the report successfully, you can ignore this warning.
    Regards,
    Yogesh.

  • Java Communication error:Error while opening an RFC connection

    Hi,
    I am getting Java Communication error:Error while opening an RFC connection when i try to run a query from Bex analyser.
    please let me know how to resolve this
    Thanks
    Bala Duvvuri

    This error usually comes when the java stack is not upgraded.
    when you upgrade yourABAP stack, simultaneously you have to upgrade the java stack also.
    Please co-ordinate with your basis team to inform EP team to upgrade the java stack when basis team do ABAP stack upgrade.
    Hope this would help you.

  • Error while importing an RFC from R/3

    Hello,
    I am getting the following error while importing an RFC from an R/3 system in the Repository:
    ***Ready for import***
    Import started...
    /XXX/YYY_CREATE_NOTIFICATION:
      + com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: PERMISSION_ERROR
    Import failed with 1 error
    Does any one know what is required? Is it missign authorizations on the R/3 side or on the XI side?
    Thank you,
    Sumant.

    Hi,
    please check your User (used for importing RFC) authorizations,
    it should have RFC authorization .
    Thanks,
    Madhav
    Note: Points If Useful.

  • Warning while deploying a map

    Hi,
    While deploying a map, it is giving following error:
    ORA-06550: line 22, column 3:
    PL/SQL: ORA-00942: table or view does not exist.
    But the map deploys successfully and working fine.
    Can anybody please tell me how to fix the warning.
    Thanks,
    Swaroop

    Hi,
    Thanks for the reply.
    I have synchronised all the tables in the map. But still it is giving the same warning, while deploying.
    --Swaroop                                                                                                                                                                                                                                                                                                       

  • Dump on execution of RFC HRXSS_PER_READ_P0006_US in ECC

    Hi
    I am just trying to execute one of FM that is used in case of country specific self service application. But I get following dump in the  backend. Strangely standard wd java also calls this FM without any dump. I also did check though extenal debugging.
    I have also checked if I execute it for any other infotype instead 006 I do get the same error.
    Please suggest if I am missing something .
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
    "HRXSS_PER_CLEANUP"
    Source Code Extract
    Line  SourceCde
        1 FUNCTION hrxss_per_cleanup.
        2 *"----
        3 ""Local interface:
        4 *"  EXPORTING
        5 *"     VALUE(MESSAGES) TYPE  BAPIRETTAB
        6 *"----
        7
        8 *  CALL METHOD mac_adapter->cleanup
        9 *    IMPORTING
       10 *      messages = messages.
       11
       12 * TRY.
    >>>>>   CALL METHOD xss_adapter->cleanup
       14     .
       15 * CATCH CX_HRPA_VIOLATED_ASSERTION .
       16 * ENDTRY.
       17
       18 ENDFUNCTION.
    Thanks
    Abhay

    Hello Abhay,
    This could be related to incorrect use of usecase in this case, please check the table V_T7XSSPERSUBTYP for the same.
    Also please Support Pack should be in sync, Mismatch will lead to the same error. You can go through the link :
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
    You can check if the BADI HRXSS_PER_BEGDA is active in your system or not ??
    Best Regards,
    Deepak...

  • Free Good Qty as non modifiable field in the Sales Order Level

    Dear Friends,
    I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
    How can i do this.. Please advice.
    Thank U,
    Uwanthi

    Hi
    This is a standard behaviour in the system
    kindly use the below program and user exitexit
    MV45AFZZ and use "Userexit_filed_modification"
    Regfards
    Damu

Maybe you are looking for

  • How to pass the default value to search help selection screen

    Hi I need to push a certain value as a default value based on a condition to the slection screen of search help in web UI. Could you please let me know how can we do this? When we try to open the 'F4' help in web ui then it should populate a certain

  • Japanese character in WLS7.0

    Hello,everyone: I got such a problem,It's about japanese character in WLS7.0. Let me describe my envirment first, OS:windows 2000 pro (japanese) WLS:Weblogic Sever 7.0 (english) When i write in a japanese character in a form contained by a jsp webpag

  • Use of TomTom app on iPhone 4s without cellular network

    I want to use the TomTom App when the iPhone is in airplane mode (or is there any other way to interfere with the network - without removing the sim). This because I have a special carphone with dualsim and for correct use the iPhone must be switched

  • Why can't I clear my history in FF9?

    Clearing recent history caused ff to lock up in FF8 so I upgraded to FF9 and it doesn't lock up, but it doesn't clear history either.

  • Displaying SVG Graph

    I have developed an SVG graph that displays my XML document (generated by an .XSQL file) in a graph. It works perfectly on most computers that I have tried it on, but in two cases the browser, instead of displaying the page, asks me if I would like t