Client not installing completing via OSD Task Sequence - Standalone Media

Dear All,
Facing this issue that i have made Standalone media for OS Deployment but after installing OS, SCCM Client doesn't install completely but when try to install from network with same Task Sequence Client installed successfully.
One more thing while installing from media, machine is connected on LAN.
For Further Reference Snapshots are attached.
As in log its stat that installation was processed but there was no ccmsetup.exe in process neither its installed correctly
======>Begin Processing request: "2097152793", machine name: "WIN7VERIFY"
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
Execute query exec [sp_IsMPAvailable] N'KHI'
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> Trying each entry in the SMS Client Remote Installation account list
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> Attempting to connect to administrative share '\\WIN7VERIFY\admin$' using account ''
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> Connected to administrative share on machine WIN7VERIFY using account 'uead\'
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> Attempting to make IPC connection to share <\\WIN7VERIFY\IPC$>
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> Searching for SMSClientInstall.* under '\\WIN7VERIFY\admin$\'
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:21 PM
10472 (0x28E8)
---> System OS version string "6.1.7601" converted to 6.10
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
---> Mobile client on the target machine has the same version, and 'forced' flag is not turned on. Not processing this CCR
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
---> Deleting SMS Client Install Lock File '\\WIN7VERIFY\admin$\SMSClientInstall.KHI'
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
Execute query exec [sp_CP_SetLastErrorCode] 2097152793, 120
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
---> Skipped request "2097152793", machine name "WIN7VERIFY".
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
Deleted request "2097152793", machine name "WIN7VERIFY"
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152793, 3
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
Execute query exec [sp_CP_SetLatest] 2097152793, N'11/10/2014 10:52:22', 1
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
<======End request: "2097152793", machine name: "WIN7VERIFY".
SMS_CLIENT_CONFIG_MANAGER 11/10/2014 3:52:22 PM
10472 (0x28E8)
REGARDS DANISH DANIE

The attached log file is related to a client push, I'm not sure how that is related to your problem. When you're having problems with the client installation during a task sequence deployment, please check the smsts log file and, if available, the ccmsetup
log file (these log files should be available on the client itself).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Create Task Sequence Standalone media help required

Hi,
Environment is SCCM 2012 SP1
I have a Win 8.1 & Win7 OS image captured from reference machine and able to deploy to machines without any issues using TS.
Now I am trying to create Standalone media in USB/DVD.
1. I am able to create .iso file when I select 8.5GB DVD type in the wizard. What steps should I perform to burn it to DVD? The normal burn from .iso does not work as it does not make it bootable.
2. When I tried to create a USB standalone media it errors out indicating Not enough space on disk. The USB is 16GB of size and the Createmedia.exe formats the USB to FAT32. Hence, the install image does not get copied.
Please advice.

More info:
How to create a Bootable DVD
http://blogs.msdn.com/b/cesardelatorre/archive/2009/03/08/how-to-create-a-bootable-dvd-windows-7-or-windows-vista.aspx
How to make a bootable DVD?
http://www.winiso.com/support/tutorials/make-bootable-dvd.html
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

OSD Task Sequence fails to install SCCM client

Hello,
Our OSD task sequence fails to install the SCCM client with certain images.
The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
If we change the image specified under "Apply Operating System" step, everything works ok.
It appears there is something wrong with this particular image. Any ideas?
Logs show no errors. Let me know which logs you'd like me to post (and from which location)
There is no ccm folder under c:\windows

Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
can mount the Image and check those settings.
RunOnce Key Reference :
https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
If the above key is present in the Image, TS Engine won't resume after the reboot.
You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
The above variable is applicable in CM 2012 SP1 and R2.
Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
can be beneficial to other community members reading the thread.

Superseding an application which is installed via OS task sequence

Hi I am using SCCM 2012 SP1 and want to update AppA_version_1 to the AppA_version_2. At the moment AppA_version_1 is a core application and is installed to all machines via OSD when the machines are built. For this reason we don't have any
collections for AppA_version_1.
I have now created a new application for AppA_version_2 and want to test the deployment to a group of machines. As part of the test deployment I want to supersede the AppA_version_1 which we currently have installed.
In the past I have tested supreseding business applications (which are not part of the task sequence and deployed to users not machines) by first creating a test collection, setting the supersedence options and then deploying the superseding (latest) application
to the test collection. When I am happy it works OK I deploy the superseding application to the main collection for that application.
I have not had to supersede an application which is part of the task sequence before but I presume I do it in just the same way ? At the moment I don't want to touch the task sequence. I want to test the deployment of AppA_version_2, then
release it to all production machines, then update the task sequence so it includes AppA_version_2. What I don't want is to deploy it to the test group but have it automatically update on all production machines.
The reason I ask is that I have read that if you update the Task Sequence with the latest version of your software and this supersedes a previous version, then all of your machines in production will receive the latest version even though it has not been
specifically deployed to them.
http://www.windows-noob.com/forums/index.php?/topic/8952-possible-bug-in-sp1-cu1-client-applications-that-supersede-others-may-rollout-unexpectedly/
Even though I am not going to update the task sequence with AppA_version_2 just yet, it has got me questioning the testing of the superseded application.
Am I OK to superseded AppA_version_1 with AppA_version_2 and deploy to a test collection (without it updating all machines in the organisation) even though AppA_version_1 is installed as part of the OSD Task Sequence.
Hope this makes sense
Thanks
G

Thanks Jorgen
What happens if I select the option : automatically upgrade any superseded versions of this application
? Would this ignore the fact that I was deploying to a test collection and automatically update all production machines where the software is installed ?
I haven't actually come across this option before, but I think that is because I usually create my deployments prior to setting the supersedence rules.
Thanks
G

Install Software Updates fails (timeouts) during OSD Task Sequence

Hi
As one of the lasts steps in our OSD Task Sequence we have an "Install Software Update" step where "Mandatory Software Updates" is choosen. It worked a week ago, but now the step fails with error code 0x800705B4
(This operation returned because the timeout period expired.)
When examining the WindowsUpdate.log I see an error followed by several minutes without log activity:
2014-02-18 10:39:13:874
416 b74
Report CWERReporter finishing event handling. (00000000)
2014-02-18 10:39:13:874
416 b74
Report CWERReporter finishing event handling. (00000000)
2014-02-18 10:39:13:874
416 b74
Report CWERReporter finishing event handling. (00000000)
2014-02-18 10:39:13:999
1632 4e4
COMAPI - Updates found = 260
2014-02-18 10:39:13:999
1632 4e4
COMAPI ---------
2014-02-18 10:39:13:999
1632 4e4
COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-02-18 10:39:13:999
1632 4e4
COMAPI -------------
2014-02-18 10:39:18:835
416 b74
Report CWERReporter finishing event handling. (00000000)
2014-02-18 11:08:12:225
416 4dc
AU AU received policy change subscription event
2014-02-18 11:08:12:334
416 4dc
AU AU Options changed from policy.
2014-02-18 11:08:12:334
416 4dc
AU Successfully wrote event for AU health state:0
2014-02-18 11:08:12:334
416 4dc
AU ########### AU: Policy change processed ###########
When examining the WUAHadler.log - again there is no log activity during the Software Update step.
Its a WSUS Update Source type ({DCA8EDB2-927C-42AC-9D2E-3D98C3BC3759}), adding it.
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Existing WUA Managed server was already set (http://<servername>:8530), skipping Group Policy registration.
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Added Update Source ({DCA8EDB2-927C-42AC-9D2E-3D98C3BC3759}) of content type: 2
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Scan results will include all superseded updates.
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Async searching of updates using WUAgent started.
WUAHandler 18-02-2014 10:39:05
2016 (0x07E0)
Async searching completed. WUAHandler
18-02-2014 10:39:13 1108 (0x0454)
Successfully completed scan. WUAHandler
18-02-2014 10:39:15 2016 (0x07E0)
Removed Update Source ({DCA8EDB2-927C-42AC-9D2E-3D98C3BC3759}) of content type: 2
WUAHandler 18-02-2014 11:06:25
1160 (0x0488)
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles WUAHandler
18-02-2014 11:09:25 2232 (0x08B8)
The Software Update Step started at 10:27 and the timeout came at 11:05.
Any ideas why the step times out? Or which logs I should look at?
Regards,
FC

PolicyEvaluator.log:
No errors. The last event is:
Received notification that Local policy has changed.
PolicyAgent_PolicyEvaluator 19-02-2014 10:51:11
1692 (0x069C)
Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:C2E937AA-CF24-420F-AD81-E8CEADBD7649";
DateTime = "20140219095123.565000+000";
PolicyNamespace = "\\\\.\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1768;
PolicyAgent_PolicyEvaluator
19-02-2014 10:51:23 1768 (0x06E8)
Forcing settings update for local policy change.
PolicyAgent_PolicyEvaluator 19-02-2014 10:51:23
2900 (0x0B54)
Updating settings in \\.\root\ccm\policy\machine\actualconfig
PolicyAgent_PolicyEvaluator 19-02-2014 10:51:33
2900 (0x0B54)
Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:C2E937AA-CF24-420F-AD81-E8CEADBD7649";
DateTime = "20140219095144.641000+000";
PolicyNamespace = "\\\\.\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 2900;
PolicyAgent_PolicyEvaluator
19-02-2014 10:51:44 2900 (0x0B54)
UpdatesHandler.log:
No errors. A couple of lines:
Successfully initiated scan. UpdatesHandler
19-02-2014 10:54:10 1768 (0x06E8)
Updates scan completion received, result = 0x0.
UpdatesHandler 19-02-2014 10:55:23
3572 (0x0DF4)
UpdatesStore.log
No errors. Just quering updates, and the last line:
Querying update status completed successfully.
UpdatesStore 19-02-2014 10:56:27
3300 (0x0CE4)
In the smsts.log I found an interesting thing:
Successfully initiated RefreshUpdates operation
InstallSWUpdate 19-02-2014 10:51:37
3424 (0x0D60)
Waiting for RefreshUpdates complete notification from Updates Deployment Agent
InstallSWUpdate 19-02-2014 10:51:37
3424 (0x0D60)
FALSE, HRESULT=800705b4 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate\installswupdate.cpp,1273)
InstallSWUpdate 19-02-2014 11:21:37
3424 (0x0D60)
Timedout waiting for updates refresh complete notification
InstallSWUpdate 19-02-2014 11:21:37
3424 (0x0D60)
It times out after exactly 30 minutes. Does 2012 have the same "feature" as 2007? (http://support.microsoft.com/kb/2009754/da)
Still the last event in windowsupdate.log is:
2014-02-19 10:55:37:251
324 dd0
Report CWERReporter finishing event handling. (00000000)
Regards,
FC

Nvidia (Quadro K2000) Driver isn't installed during OSD (Task Sequence succeeded) - HP Z620

Hi everyone,
I have added a driverset (HP Z620) in SCCM for the first time using our internal procedure (Importing Drivers to SCCM, Create Driver package with specific category, apply driver package in TS using WMI to query for the model).
The Task Sequence succeeded, but the NVIDIA K2000 Graphics driver isn't installed (only HD Graphics 4000 driver).
Looking at the drivers in the Driver Package, this should normally apply since the driver is compatible with this specific GPU.
At the forums, I can see that some people have created a seperate package for the GPU driver installation using command line switches.. But looking at the environment at the customer, we have never done this and in the past, we have succesfully installed
the driver for this GPU before.
PS: The driver for the GPU in my new driver package (HP Z620) isn't the same as for previous models (HP Z220, Z230, Z600).
Could you please advise me what to do? Should I have added something in the driver sources before importing the driver to SCCM?
Thanks in advance!
Kind regards

Hi
I m installing Nvidia (Quadro K2000) Driver during OSD (Task Sequence succeeded) - HP Z420
Remove the Graphics driver for NVIDIA from the current driver database
Added below task in the existing task sequence as invidual installation based on the Condition (WMI query)
Command Line
HP_Z420_Graphics_x64\Win64_332_50\setup.exe -s -k -clean -noeula
This will install the desired driver and related configurable components
WMI Query
select * from win32_ComputerSystem where manufacturer like '%hewlett%' and model like '%z420%'
Currently I m looking out for the Errors codes needed to add to this task . Success codes 3010 and 0 already added

SCCM OSD Task sequence variables via Powershell.

Hi,
I am trying to come up with a genernic function to read
SCCM 2012 OSD task sequence variables where
I can pass a varibale name:
Is this the correct way of doing it below?
Thanks,
Ward
# fnRead_SCCM_Variable
function fnRead_SCCM_Variable($sccm_variable)
            $tsenv = New-Object -COMObject Microsoft.SMS.TSEnvironment
            $data = $tsenv.Value($sccm_variable)
            return $data
$log_path = fnRead_SCCM_Variable "_SMSTSLogPath"

That should do the trick. For a nice blog post about the usage of task sequence variables in PowerShell, see:
http://blogs.technet.com/b/mniehaus/archive/2009/09/22/running-powershell-scripts-as-part-of-a-task-sequence.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Dell Driver Packages breaks OSD Task Sequences?

I'm completely stumped here... I had an OSD Task Sequence that was working perfectly. Then I imported some Dell Driver Packages with the Dell Client Integration Pack and suddenly, OSD doesn't work anymore.. I made no changes to the Task Sequence itself (steps
are listed below).
The weird thing is, when the OSD is actually running, the progress bar goes through all of the steps and the Monitoring space on the deployment shows each step completing successfully, but every step after "Apply Operating System" doesn't actually
take effect. When rebooted, I find the computer has not joined the domain, has not applied any drivers, has not installed the SCCM client, didn't install any of the applications, and didn't install the updates. It's like the task sequence just
stopped actually writing to the hard drive and just pretended to go through the motions.
Does anyone have any idea what could have happened? This same task sequence used to work just fine. Could just having driver packages available on the DPs break the OSD even though they're not even referenced in the task sequence?
-Install Operating System
-Restart in Windows PE
-Partition Disk 0
-Apply Data image 1
-Apply Operating System
-Apply Windows Settings
-Apply Network Drivers
-Apply Device Drivers
-Setup Operating System
-Setup Windows and Configuration Manager
-Install Java
-Install Adobe Acrobat Reader XI
-... install a few more applications
-Install Updates

As Torsten said, yes, you will need to examine the logs. Post the contents of smsts.log here if you don't know what to look for
Here's a reference to help you find the location of the logs:
http://richardbalsley.com/location-of-smsts-log-when-using-configuration-manager-operating-system-deployment
Also:
What OS are you trying to apply?
What version of WinPE are you using?
Are you using Auto Apply Drivers or Apply Driver Package steps to install drivers? If Auto Apply Drivers, do you have them limited by category?

Installing "Applications" during the task sequence and installation enforcement

Hello,
Kind of a weird question here, so it seems like I'm seeing that if you install an application on a system during its OSD task sequence, then you later manually uninstall that application, that SCCM considers that system now out of compliance?
And then reinstalls the application as indicated in AppEnforce.log? Is this true? If so, how do you get around this behavior? I guess I thought that this application compliance only took effect when you actually deploy an application to a
system, through an actual deployment. I didn't realize that it would enforce compliance even if an application was installed during a task sequence. So if you have hundreds of systems that were imaged with the same task sequence and you have
a small handful of machines that can't have application X on it (so you want to uninstall it), which was installed via the task sequence, how do you disable this compliance enforcement and disable its automatic reinstall?
Thanks for any help you can provide.

Sorry for the delayed response, thank you both for your input. To answer both your questions, no these workstations do not have any required deployments for this application directed at them. I have confirmed that, however, they do have
the OSD task sequence deployment (that contains this application) constantly "available" to them (via only "media and PXE") as this makes it very easy for our technicians to reimage any machine whenever they need to (love that feature
by the way).
I can only assume that because they still have this task sequence deployment pointed at them is why they continue to attempt to reinstall this application when ConfigMgr finds that it's not installed anymore. In fact it does it at the same day/time
each week, which I believe is the same day/time of the week that the machines were imaged. I must have the compliance part of the clients configuration to check every 7 days for stuff like this? Anyway, that's my conclusion for now.
Since even Wally Mead felt that this must be an actual required deployment outside of the task sequence I'm really curious to see if anyone else sees this behavior. It would be fairly simple to attempt to recreate, image a machine with a task sequence
that has "application" installs included, where the deployment for it is just "available" and keep the deployment "available" after the machine is reimaged. Then after that, uninstall one of the apps that was installed
during the task sequence via an "application" and then see if it reinstalls automatically, it may wait a while (may 7 days by default?). You can see the evidence of our application reinstalling itself in the "AppEnforce.log".
Is it even remotely possible that this is a new "feature" or behavior of ConfigMgr 2012 and "Applications"?

Creative Cloud: "Build" MSI Hangs During SCCM OSD Task Sequence Installation

I wanted to share problem and solution I found when deploying Creative Cloud Packager-created packages/application using SCCM 2012 R2. I encountered this problem packaging this as both a Package and as an Application in SCCM.
When installing the software through SCCM Software Center onto a client, Software Center would close right as the installation of the "Build" folder MSI completed. This is abnormal behavior.
When installing the application as part of an OSD Task Sequence, the software would get installed (as shown by logs) but SCCM would hang forever at the "Installing Application" step.
I tried all sorts of different settings in SCCM and with the MSIEXEC command line and eventually traced it to the Reboot Manager functionality in MSIEXEC that will close and attempt to restart processes using files that the installer needs. Reboot Manager clobbered part of SCCM and in the Task Sequence, the connection between SCCM and the installer was broken.
The solution is to pass the property "MSIRESTARTMANAGERCONTROL=Disable" along the command line when calling MSIEXEC on the Build folder MSI file. This setting disabled Restart Manager so it didn't mess up SCCM. Once I did this, my Software Center installs and OSD Task Sequences ran as intended.
For reference, I used the REBOOT=ReallySuppress property for reboots and let SCCM determine what to do with reboots based on the return code. My testing was done with Windows 8.1 Enterprise x64.

Like said, did you configure my proposal: "Configuration Manager client will force a mandatory device
restart" ? After you've configured that, update your deployment type manually and remove the old revisions of the application and try running the TS again. I'm guessing you're a little bit too fast on your doings so the ConfigMgr doesn't play a long very
nicely...
The TS stops because of your Hard Reboot (exit code 1641), I've seen this before and I configured my application so that ConfigMgr client will force device restart and that fixed my problem. Although, also my application is the last one in the TS, but still,
the TS continues after the reboot.
Btw. have you tried changing your command line to:
msiexec.exe /i cd-ord.msi TRANSFORMS=sv-se.mst MVLICENSE_KEY=xxxxxxxxxxxxxxxxx /L*V "%temp%\cdord.log" /qn
/norestart

UDI OSD Task Sequences started failing with 0x80070002 error in SCCM 2012

This is kind of long, but here goes...
We built a UDI task sequence in SCCM 2012 (with MDT integration) that we were testing for deployment of a couple of different Win7 images. We customized the UDI experience thru the UDI wizard and XML file and OS deployment worked as expected
thru the task sequence (testing on Hyper-V VMs). Recently, this UDI TS started failing with error 0x80070002 during what appears to be the "Use Toolkit Package" step. This is after the OS image has already been laid down and after the ConfigMgr
client has been installed/configured. The SMSTS.log reports "Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x8007002" Among other errors...I will post the entire log below...
After the error during deployment, Win7 will boot normally, however, you have no network connectivity and it appears the proper network driver didn't get loaded in the OS. Combine this with the fact that the TS should have joined the machine to our domain,
but you can't login because no network.. Im not sure if the network issue is a product of the TS failing early or the actual cause of the TS failure.
Anyway, I attempted to build another UDI task sequence using the same boot image and toolkit/settings packages, but am experiencing the same error during deployment. We have a few OSD task sequences built without UDI and those all still work just fine.
So, I am at a loss for where the root problem lies. Any suggestions or assistance would be greatly appreciated.
Here is the entire SMSTS.log and BDD.log...
https://skydrive.live.com/redir?resid=D65B1C4362892A26!110&authkey=!AKu5mOvDsXaEgvc
Thanks
Richie Tenhet

your failure does appear to be network (driver or otherwise) or dns related and it cannot contact the management point FQDN just around the time where it should download and execute the
Use Toolkit Package step...
"Starting Task Sequence Engine . . . "
"Non fatal error 0x80072ee7 in sending task sequence execution status message to MP"
"Start executing an instruciton. Instruction name: Use Toolkit Package. Instruction pointer: 83"
"unknown host (gethostbyname failed)"
"sending with winhttp failed; 80072ee7"
"Tried all the available http based locations. SMB based locations will be attempted now."
"Failed to resolve the source for SMS PKGID=P0100015, hr=0x80070002"
"Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows)"
that said, check that the package referenced above actually exists and is the correct source version on your distribution points, also verify (press F8 and check can you ping the FQDN of your management point) that you have network connectivity
around the time of the failure.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Whats the best way to apply office updates during OSD task sequence with Software Update Agent disabled?

I am trying to update office via the SCCM 2012 R2 OSD task sequence. I know offline updating only updates the core components in the WIM and I'm trying to figure out how to add office updates as well. I am aware of using powershell to try and kick off
a WU scan as seen here:
http://myitforum.com/myitforumwp/2012/01/24/use-powershell-commands-to-assist-with-patching-during-sccm-image-build/
But the kicker is we don't use SCCM to update the workstations (Solo WSUS install). Is there a way to do this (maybe set the client in the TS to switch on SUP, then off again when it goes off into production) rather than have to build a new image every month?

You could use the ZTI_WindowsUpdates.wsf script from MDT.
http://scriptimus.wordpress.com/2012/03/22/mdt-2012-automating-updates-in-lite-touch-deployments/
How does it work?
The task sequence steps run a script called ZTIWindowsUpdate.wsf. The script uses the
Windows Update Agent API to manage the downloading and installation of updates. All audit information is written to the
ZTIWindowsUpdate.log file. If you find any unusual error codes in your log returned from the API (although I never have) you can compare the codes
here. The script will also check and update the
Windows Update Agent(WUA) as needed at the start.
In its default state, the ZTIWindowsUpdate.wsf script will connect to Microsoft Update then search for and download all available updates including Security Patches, Drivers, Browser Updates and Service Packs. This is essentially the same
as opening the GUI and selecting check for updates.
Daniel Ratliff | http://www.PotentEngineer.com

PXE OSD Task Sequence fails to run on new laptop

We are trying to run a working PXE OSD task sequence on a new HP laptop. It's a Elitebook 840 G2. We've downloaded the provided driver package & created a new driver package in SCCM. We inserted the driver into the boot image &
updated the DPs. When we PXE boot the laptop it flashes the splash screen & reboots. Other laptops & desktops boot properly. This looks like a driver issue but we wanted to run it past the forum to see if anyone had any other suggestions.
The SMSTS log file is copied below.
LOGGING: Finalize process ID set to 728
TSBootShell
4/23/2015 4:20:40 PM
732 (0x02DC)
==============================[ TSBootShell.exe ]==============================
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
Debug shell is enabled TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Waiting for PNP initialization... TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
RAM Disk Boot Path: NET(0)\SMSIMAGES\ALN00001\BOOT.ALN00001.WIM
TSBootShell 4/23/2015 4:20:40 PM
736 (0x02E0)
Booted from network (PXE) TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Network(PXE) path: X:\sms\data\ TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Found config path X:\sms\data\ TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Booting from removable media, not restoring bootloaders on hard drive
TSBootShell 4/23/2015 4:20:40 PM
736 (0x02E0)
X:\sms\data\WinPE does not exist. TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
X:\_SmsTsWinPE\WinPE does not exist. TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Executing command line: wpeinit.exe -winpe TSBootShell
4/23/2015 4:20:40 PM 736 (0x02E0)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:40 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:40 PM 732 (0x02DC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:41 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Executing command line: X:\WINDOWS\system32\cmd.exe /k
TSBootShell 4/23/2015 4:20:41 PM
732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
Successfully launched command shell. TSBootShell
4/23/2015 4:20:41 PM 732 (0x02DC)
The command completed successfully. TSBootShell
4/23/2015 4:20:43 PM 736 (0x02E0)
Starting DNS client service. TSBootShell
4/23/2015 4:20:43 PM 736 (0x02E0)
Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSBootShell 4/23/2015 4:20:44 PM
736 (0x02E0)
The command completed successfully. TSBootShell
4/23/2015 4:20:44 PM 736 (0x02E0)
==============================[ TSMBootStrap.exe ]==============================
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL'
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL'
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
Current OS version is 6.2.9200.0 TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
PXE Boot with Root = X:\ TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Executing from PXE in WinPE TSMBootstrap
4/23/2015 4:20:44 PM 1124 (0x0464)
Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll
TSMBootstrap 4/23/2015 4:20:44 PM
1124 (0x0464)
TsPxe.dll loaded TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Device has PXE booted TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Variable Path: \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Succesfully added firewall rule for Tftp TSPxe
4/23/2015 4:20:44 PM 1124 (0x0464)
Executing: X:\sms\bin\i386\smstftp.exe -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Command line for extension .exe is "%1" %*
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Set command line: "X:\sms\bin\i386\smstftp.exe" -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 172.20.100.51 get \SMSTemp\2015.04.22.16.21.10.0001.{8EBA05A2-1AB7-4CBB-9DDD-497DFE8E5E07}.boot.var X:\sms\data\variables.dat
TSPxe 4/23/2015 4:20:44 PM
1124 (0x0464)
Process completed with exit code 1 TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
Succesfully removed firewall rule for Tftp TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Failed to download pxe variable file. Code(0x00000001)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
PxeGetPxeData failed with 0x80004005
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2667)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Exiting with return code 0x80004005 TSPxe
4/23/2015 4:21:31 PM 1124 (0x0464)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)
TSPxe 4/23/2015 4:21:31 PM
1124 (0x0464)
Execution complete. TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
GetTsRegValue() is unsuccessful. 0x80070002.
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
End program: TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
Finalizing logging from process 728 TSBootShell
4/23/2015 4:21:31 PM 736 (0x02E0)
Finalizing logs to root of first available drive
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)
LOGGING: Setting log directory to "D:\SMSTSLog".
TSBootShell 4/23/2015 4:21:31 PM
736 (0x02E0)

Press F8 in order to get a cmd window and see if the client got an IP address.
Torsten Meringer |
There's no IP Address when trying to the command prompt. It doesn't even show a MAC Address.

OSD Task sequences failed in application installation step.

Hello,
I am deploying win 7 with installing app-v client application(by package), I applied this Task sequences on some of devices sometimes it worked and installed app-v client application but in some cases
Task sequences failed to installed app-v client steps.
Please provide reason for this and how to resolve this.

Certain pre-requisites need to be installed for the App-V client to successfully install.
Take a look here http://sccmentor.wordpress.com/2013/05/21/deploy-the-app-v-5-0-client-with-sccm-2012/
Note that KB2533623 has been superseeded if you are pushing out any Windows Updates as part of your OSD.
http://sccmentor.wordpress.com/2013/07/30/kb2533623-superseded-by-kb2758857/
Have these pre-reqs been applied in the Task Sequence prior to the App-V client install? If not add them in and try the push again.
Cheers
Paul | sccmentor.wordpress.com

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

Client not installing completing via OSD Task Sequence - Standalone Media

Similar Messages

Maybe you are looking for