Client not picking correct AP

Hello,
Just wondering if anyone has any ideas on why a client would not select the "better" AP?  This particular client see's 4 AP's and one of them is obviously the better one at -64.  Yet it inists that it wants to connect to one of the worst ones at -84.  There is no logic in it, and I don't see a way to force to to connect to the closer AP.
Thanks,
Dan.

Dan,
Most times the controller will instruct an AP to reduce power if it detects co-channel interference i.e another AP transmitting on the same channel. I am not really a great advocate of auto power settings because most times APs are at full blast until there is co-channel interference. Max power encourages hidden node problem.
Regarding what rates, it's hard to say because clients may support different data rates at the same RSSI level. For 802.11g, mandatory rates are 6,12, and 24. Hence you could disable 6 and 9 or change to supported and set your mandatory to 12 or disable 6,9, 12 and set mandatory to 24.
What is the distance of the problem client in relation to both APs? Have you taken the client closer to the AP behind the cinder wall and see if it still stays on the other AP.

Similar Messages

  • Profit center not picking correctly in PO from sales order

    Hi Experts,
    Profit center is not picking correctly.. in PO
    In material master Profit center is configured as XXXX
    We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
    There is one purchase requistion for the same material with two line items
    But  we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
    In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but  in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
    What could be reason ? Help  in this regard will be highly appreciated.
    Thanks in advance
    Narayanan

    Hi Narayan
    Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
    It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
    Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
    BR,Ajay M

  • Webi does not pick correct Data

    Hi Guys,
    I have a webi. The Universe for the Webi is based on  Bex Query. I see correct Data in Bex Query but when I create a webi report it does not pick correct data.
    I have checked following points already:-
    1] No Resstriction at Query Level
    2] No restriction at Universe Level
    3] No Filters/ Restriction at Webi Level.
    Can anyone suggest whats happening?
    Regards

    Hi Ray,
    It happens sometimes that data gets aggregated over all the dimension objects present in the 'Available Objects' section in webi.
    Try to pull only the characteristics present in the row section of the bex query say 'X' and measure in the column section of bex query say 'Y' into the results pane in the edit query window in webi.Then run the report and check.
    This will give you the idea about aggregation.
    Regards
    Vineeta

  • APP not picking correct numbers

    Hi,
    I assigned one number range (eg: 100 to 200) for two document types ZP and ZV.
    While running the payment program the system is picking the numbers differently.
    Eg:
    when i run payment run on 01.04.2007 the system is picking number ranges 100,101,102,103,105,106,108 etc.
    when i run payment run on 02.04.2007 the system is picking number ranges 104,107etc.
    the numbers 104 and 107 is not picking in the first payment run. why it is happenning
    this is the issue of client.
    REQUIRE URGENT SOLUTION
    Rgds
    sunfico

    Hi,
    Have a talk with your basis consultant for buffering number range's. For FI it should be 1!!
    Paul

  • Color picker does not pick correct colors

    I have a Samsung Galaxy Note 10.1 with pre-installed PS Touch. Has anyone else noticed how the color picker doesn't always pick correct colors? In my case, it picks a slightly darker color than the source color. I wanted to upgrade to version 1.3 to resolve this, but cannot find any upgrade option anywhere. Please help!

    This screenshot is of a normal layer at opacity 100%. I first did a uniform color fill, then sampled the color. Every area of color, therefore, ought to be exactly the same, without any slight variation whatsoever.
    The two brushstrokes to the left are done with the brush hardness set at 20%, with no pressure related controls, the left-most one set at 20%opacity, and the one to the right of it set to 100% opacity.
    The two brushmarks in the middle are done with brush hardness set to 100%, again, no pressure related controls, the leftward one set at 20% opacity, the right at 100 %.
    The two to the right are again done with 100% brush hardness, but this time, pressure related opacity control has been enabled. The left is at 20% opacity, the right at 100%.
    As you can see, the center of each brushstroke seems to have thecorrect color. So I agree with georg_maximus. It appears that this issue is an opacity related one, rather than a color picker problem.

  • Forefront clients not reporting correctly

    Hi guys
    Here at work, we have 2 Forefront management servers which are being used to provide policies for a large number of different managed customers (different networks, domains, etc).
    We're having an issue where some FEP clients are updating correctly and working fine but the Forefront reporting on the management server is saying otherwise. I've noticed that for some clients, the policy showing as installed when looking at the
    registry isn't tying up with what the report console shows.
    I've tried re-applying the required policies to some of the clients for a test but this has made no difference. I can't see any pending actions on the MOM console, etc.
    Any advice greatly appreciated.

    Hi,
    Did the Forefront Client Security Management Server computer display as an
    agent-managed computer on MOM Administrator console and appear in Forefront Client Security reports? If not, maybe it is due to the FCS Management Server computer does not communicate correctly with the collection server. Please make sure that you have installed
    the MOM agent on the FCS Management Server computer. In addition, I would appreciate it if you can provide some screenshots of the MOM console and the related information of the report on the FCS management server.
    Best regards,
    Susie

  • Clients not picking up changed application files

    I created an application and deployed it to a collection containing 1 workstation.  I needed to make a change to one of the files in the application, so I made the change in the source for the application, redistributed the content to my distribution
    point and tried to run the updated application on the client.
    The workstation will not pick up the changed file.  I have run the Machine Policy check in, the User Policy check in, and the Application Deployment Evaluation Cycle multiple times to no avail.
    We are just beginning our implementation of SCCM (converting from Altiris) and this is really frustrating me to no end.
    Any help will be greatly appreciated.

    There are multiple ways to check if the current version of the application is being installed. One of them is to check the AppEnforce client log file after triggering the installation.
    That should show a line like the following, which includes the revision of the installed application:
    <![LOG[+++ Starting Install enforcement for App DT "<DeploymentType>" ApplicationDeliveryType - ScopeId_A351EC12-B25C-4327-80EE-247F25E4CE55/DeploymentType_26778027-8288-4f4e-b588-f8259f85777d,
    Revision - 6, ContentPath - C:\Windows\ccmcache\2, Execution Context - User]LOG]!>
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Startup command not picking correct pfile

    Hi Guys,
    I am facing a problem. Whenever I try to start oracle on my Linux machine I get the foillowing error:
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/home/oracle/oracle/product/10.2.0/db_1/dbs/initARIES.ora'
    Actually the pfile mentioned is not the correct one. I do not know where it is taking the path from. I had to start using the following command:
    startup pfile=/home/oracle/oracle/product/10.2.0/db_1/admin/aries/pfile/init.ora.110200612140
    Please provide me some way that I need not to mention the full path of pfile everytime.
    Thanks

    You can also create the initARIES.ora file in the dbs directory (the database is searching there by default) and use the IFILE parameter to point to the file you actually want to use.
    It seems the file you currently using is the one created during installation. Doesn't you have an SPFILE??? Using an SPFILE has some advantages (faster startup, change parameter using alter statement). You can create one via create SPFILE xxx from PFILE. If you place it in the dbs directory oracle should find it automatically. Again no need to pfile in the startup command.

  • F.05-Curr Translation - System not picking correct accounts from FBKP (KDF)

    Hi FI Gurus,
    We are having  INR as Company Code Currency & USD as  Group Currency.
    We have given a diff set of accounts in FBKP-KDF for valuation and translation.
    When we run F.05 for translation with Currency Type 30, the system is correctly converting all INR line items into USD  but while posting the accounting document the valuation accounts are getting picked up instead of translation.
    In debug, we found out that the system requires Clearing Document to go for Translation accounts & if it gets the clearing document in line item then  it is picking up the  correct accounts.
    But then how the translation works for P&L accounts or balance accounts?
    What is the exact functionality of Translation? How postings can be generated to correct accounts?
    Regards
    AK

    Make the following entries in F.05 and execute.
    General Selections:
    1. Enter comany code
    2.Valuation Key Date
    3.Valuation  Method
    4. Valuation in Curr Type: 30
    Under Posting:
    1. If you are running it in a test mode, then do not check the boxes Bal. sheet preparation valuation and Create Postings.
    2. Enter document date, posting date and period
    3. Check the box: Reverse Postings
    Under Open Items
    1. Check Valuate G/L Account Open Items
    2. Specify your G/L Account Numbers
    3. Check the radio button: Valuate GR/IR
    4. Check the box: Valuate Vendor Open items
    5. Check the box: Valuate Customer Open Items
    Under G/L Balances
    1. Check the box: Valuate G/L Account Balances
    2. Specify your G/L Account Numbers
    Under Other
    In our system, we created a variant and entered it in the blank field next to List Variant.
    Under FASB 52
    1. Exch. rate type for translation: Enter your exchange rate type here.
    2. Check the box: Use for translation
    3. Translation of currency type: 10
    Execute your report.
    Point of Note: None of this would work if you have not configured your foreign currency valuation properly. To get FCV working can be very frustrating and you would need to take your time. We have been working on ours for almost 7months now so patience and more research would help.

  • Delivery Output Not picking correct condiotion

    Hi All,
    As per my clients requirement I have created a new condition with Shipping Point/Sales Document Type/and Material for Delivery out put,the other two conditions being , Shipping Point/Sales DocumentType & Shipping Point/Delivery Type I placed the new condition in first place in access sequence followed by the remaining two, and created condition records for all the three with different printers for each of them.
    Now when am creating delivery always the second condition i.e,Shipping Point/Sales DocumentType is getting picked ahead of the first one, it is happening that if am checking the item data in the delivery then it is automatically changing to the first condition type, please suggest how to make the system to read the first access.
    P.S :Tried  Requirements & not working
    Thanks in Advance
    Regards
    Sekhar

    Hi
    I got IT
    Regards
    Sekhar

  • CBO not picking correct indexes or doing Full Scans

    Database version - 10.2.0.4
    OS : Solaris 5.8
    Storage: SAN
    Application : PeopleSoft Financials
    DB size : 450 gb
    DB server : 12 CPU ( 900 Mghz each ), 36 GB RAM
    ASMM - sga_target_size = 5 gb
    Locally managed tablespaces - MANUAL
    - db_file_multiblock_read_count - not set explicitly in spfile ( implicitly defaulted to 128 )
    - other optimizer related parameters are set to default
    - system_statistics - CPUSPEEDNW=456.282722513089, IOSEEKTIM =10, IOTFRSPEED=4096     
    - dictionary object system stats were last gather in Nov 09
    - stats on schema objs are gathered every night using custom script, but I have to say there are some histograms on some tables which were gathered by PS admins
    begin
    dbms_stats.gather_schema_stats(
    ownname=> 'SCHEMANM' ,
    cascade=> DBMS_STATS.AUTO_CASCADE,
    estimate_percent=> DBMS_STATS.AUTO_SAMPLE_SIZE,
    degree=> 10,
    no_invalidate=> DBMS_STATS.AUTO_INVALIDATE,
    granularity=> 'AUTO',
    method_opt=> 'FOR ALL COLUMNS SIZE 1',
    options=> 'GATHER STALE');
    end;
    Details :
    We are experiencing erratic database performance. It was upgraded from 9i to 10g along with PS software upgrade. A job that runs on one day in 12 hrs(that is high in itself) would take more than 24 hrs another day.
    We have Test and Staging envs on other servers which do not have performance issues of production magnitude. The test, staging dbs are clones of prod, created by ftp'ing files from one location to another, not sure if that makes any difference but just pointing out.
    On Prod db some symptoms which baffle me are :
    1) sql executing for over 40 minutes, check the plan and it is using an "incorrect" index, idx1. Hint sql with "correct" index, idx2, and it runs in few seconds. result set <400 rows. Cost with hint with idx2 is HIGHER. This scenario is still understandable as CBO is likely to pick a lower cost.
    - But why is there so much discrepancy in cost and response time?
    - what is influencing the CBO to pick an index which is obviously not the fastest response time?
    2) sql plan shows FTS , execution time , runs forever . But a hint with index in this case shows the cost is LOWER and response time is in seconds, so why is CBO not even evaluating this index path? Because as I understand the CBO, it will always pick the lower cost plan.
    What is influencing the CBO. Is it system stats? or any other database parameter? or the hardware ? the large SGA?? histogram ?? Stats gathering?? is there is any known issue with DBMS_STATS.AUTO_SAMPLE_SIZE and cardinaility?
    Where should I put my focus?
    What am I looking for ?
    I do have Jonathan Lewis's Cost-Based Oracle Fundamentals which I have just started so perhaps I will be enlightened but while I read it, it would be of immense help to get some advice from forum gurus.
    At this time I am not posting any exec plan or code, but I can do so if required.
    Thanks,
    JC

    Picking up just a couple of points - the ones about: why can performance change so much from one day to the next, and how can the optimizer miss a plan which (when hinted) shows a lower cost.
    NOTE: These are only suggestions that may allow you to look at critical code and recognise the pattern of behaviour
    Performance change:
    You are using "gather stale" which means tables won't get new statistics is the volume of change since the last collection is "small". But peoplesoft tables can be big, so some tables may need a lot of data to change (which might take several days or weeks) before they get new stats. The 10g optimizer is able to compare the high-values stored with the predicate values supplied in queries, and decide that since the predicate is higher than the known highest value, it should scale down its estimates of data returned. After a few days when the stats haven't changed, the optimizer suddenly gets to the point where the estimated data size is much too small and the plan changes to something that you can see is bad. The typical example here is a date column that increases with time, and a query on "recent data" - the optimizer basically says: "you want 9th Feb - the high value says 28th Jan, there's virtually no data". Keeping date and sequence-based high-values up to date is important. (See dbms_stats.set_column_stats).
    Lower cost plans available:
    Sometimes this is a bug. Sometimes it's an unlucky side effect. When a query has a large number of tables in a single query block, the optimizer can only examine a limited subset of the possible join orders (for example, a 10-table join has over 3million join orders, and the default limit is 2,000 checked). Because of this limit, Oracle starts working through a few joins orders in a methodical manner, then does a "big jump" to a different set of join orders where it checks a few more join orders, then does another "big jump". It may be that it never gets to your nice plan with the lower cost because it doesn't have time. However, by putting in the hint, you may make some of the orders the optimizer would have examined drop out of the "methodical list" - so it examines a few more in one sequence, or possibly "jumps" to a different sequence that it would not othewise have reached. (I wrote a related blog item some time ago that might make this clearer, even though it's not about exactly the same phenomenon: http://jonathanlewis.wordpress.com/2006/11/03/table-order/ ).
    Your recent comment about dynamic sampling is correct, by the way - by default (which for your version is is level 2 as a system parameter) it will only apply for tables which don't have any statistics. It's only for higher levels, or when explicitly hinted for tables, that it can apply to tables with existing statistics.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    "Science is more than a body of knowledge; it is a way of thinking"
    Carl Sagan
    To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • FortiClient SSL VPN Client Not Functioning Correctly

    Hello,
    I use the FortiClient SSL application to connect to work. In Windows 7 x64 it works without issue. In Windows 8 Build 9200 it exhibits and odd behaviour.
    I can connect using FortiClient version 4.4.3.445. Once connected my sent bytes continues to increase which is correct. However received bytes stays at 0.
    If I try to Remote Desktop it fails.  This is obviously due to no inbound packets coming back from the Fortigate appliance being allowed back to Windows 8.
    Disabling the Firewall doesn't have any affect on the condition. Received bytes stays at 0. 
    This is a clean install with no 3rd party applications, other than the Forticlient software. This is only the SSL VPN portion of  the the FortiClient software and does not included AV or Firewall options.
    Doing some Googling, I've seen some other people with the same problem but no resolution. Another FortiClient user and Sophos & Juniper SSL VPN clients having the same problem.
    Does anybody have any idea what would be causing the SSL VPN to only send bytes but not receive.
    Thanks!
    UPDATE 2:
    In the built in MSTSC.exe "Remote Desktop" I went into Options/Advanced/Server Authentication. I switched the setting to "Connect and don't warn me" and that fixed the problem. The default was "Warn Me' However the warning screen was not coming up.
    Just for the heck of it I switched it back to the default settings and saved. Strangely I now get the "Warning" screen that you would normally see. So now both the built-in and App Store Remote Desktop applications are working. FortiClient still shows Bytes
    received as 0.....which is odd.
    UPDATE: Solved Workaround
    I was using the built-in Remote Desktop Application without success. I went into the APP Store and saw their was an APP called "Remote Desktop" I installed that and connected my FortiClient SSL to work. Still no received bytes like I would get in
    Win7. I then launched the "APP" Remote Desktop, punched in my PC name at work and creds and boom I can login to my work PC. FortiClient SSL still showing no received bytes, but the "Remote Desktop" from the APP store does work. Not sure why MSTSC.exe will
    not work, and why FortiClient shows no received bytes is still unsolved. At least the APP Store Remote Desktop works with the SSL Client.

    Hello Everyone,
    I finally able to track down the issue .
    After spending 3 days i found that VPN Client may bind some setting with user. I tried to install the same on my personal laptop and another machine where the user bind with same account
    (hotmail).
    Then I realize may be this is user issue so I follow below steps and it work fine.
    1. Uninstall Client from Machine
    2. Remove same from IE ( Options =>> Connections)
    3. Restart System
    4. Create Local user and provide administrator rights.
    5. Login with new user and logoff all other.
    6. Install Client.

  • Mail notifications for Eudora clients not displaying correct information in message subject

    I have been using PMDF from Innosoft with Netscape Calendar Server 4.0. I
    recently upgraded from Calendar Server 3.51 to 4.0, and I am using the
    sendmail command to
    send out email notifications. When I send out email notifications, clients
    who use Eudora and who are on a Windows platform do not see the correct
    information in the Subject line of the emails. This problem does not occur
    with other email clients, including Eudora clients on Macintosh platforms.
    This problem also does not occur when I send email using the natives endmail
    binary.
    <P>
    The following line is an example of the Subject line that is displayed when
    a Eudora client on Windows views an email notification:<BR><P>
    Subject: Wallace (xsw),Brian SmlhbiBT
    <P>
    Is there is a way to configure how Calendar Server writes the Subject lines
    for email notifications?
    <P>
    Check the setting for the character set that is being used for the content
    portion of email messages. This setting is in the Calendar Server
    configuration file, which is located at<BR>
    <P>
    /users/unison/misc/unison.ini
    <P>
    The mimecontentcharset
    parameter under the [CWS]
    section determines what character set is used to encode the content and subject
    portion of a (MIME) email message.<BR>
    <P>
    The accepted values for the mimecontentcharset
    parameter are as follows:<BR>
    <P>
    ISO-8859-1
    Shift_JIS
    MSCP932
    <P>
    The default value is ISO-8859-1
    .<BR>
    <P>
    For more information about the steps for configuring the Calendar Server,
    please see the Netscape Calendar Server 4.0: Administrator's Guide at
    <BR>
    <P>
    http://docs.iplanet.com/docs/manuals/calendar/ncs40/ag/chapter7.htm#1019632

    Try first disabling any custom rules you may have, and see whether that makes a difference. If the problem persists, proceed as follows.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
    3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
    4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
    5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • Report not picking correct data

    Is it possible for vendor aging report to dispaly for Particular Vendor the
    amount ( bsik-dmbtr ) using Purchase organization field.
    There are two Purchase Organizations C100 ( for CPU ) and D100 ( for Monitor ) in my case.
    data is picked from bsik , lfm1 ,lfa1 tables.
    Example : if D100 is for  Monitor-screen  and has amount 1000.
    c100 is for CPU  and has amount 2000.
    In that case report with Vendor , comp code, Pur. Orga and period should disply
    c100 amount 2000.
    D100 amount 1000.
    my report is showing that vendor is existing for C100 or D100.
    but for vendor that exist in both C100 and D100. ( Say vendor number 200 )
    the amount is coming for vendor number 200 in  c100 and d100    equal to   1000.
    but it should come c100 = 2000
    and for d100 = 1000.

    hi
    I am not sure about this point in vendor aging report. i have added a pur Organization field in this report.
    I am asking
    If vendor no 123 is in D100  and C100 ( D100 and C100 are Pur Organizations )
    Initially no transaction is there.
    Suppose vendor  no 123  created a Puchase Order of 500 /- using D100 Purchase Organization in duration 01.01.2008
    to 01.01.2009
    But vendor no 123 in Purchase Organization C100 has no transaction.
    Then 123 with D100 is sould show 500/-
    and 123 with C100 is 0 /-.
    output of this report should show above results ?
    If output is like this then how to rectify my report  ?
    Or it shoud show the result like this
    Then 123 with D100 is sould show 500/-
    and 123 with C100 is 500 /-
    My output is showing like above same
    Thanks

  • FM not picking correct entry

    Hi experts,
    Can anyone please explain what the below FM performs:
    ==================================
    FUNCTION Z.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(CHRT_ACCTS) TYPE  /BI0/OICHRT_ACCTS
    *"     REFERENCE(ACCOUNT) TYPE  /BI0/OIACCOUNT
    *"     REFERENCE(CO_AREA) TYPE  /BI0/OICO_AREA
    *"     REFERENCE(ZPC) TYPE  /BIC/OIZPC
    *"     REFERENCE(KEY_MUST_BE_FOUND) TYPE  BOOLEAN DEFAULT 'X'
    *"     REFERENCE(MSGTY) TYPE  SYMSGTY DEFAULT 'I'
    *"     REFERENCE(GET_FIRST_ENTRY) TYPE  BOOLEAN DEFAULT 'X'
    *"     REFERENCE(DATETO) TYPE  RSDATETO
    *"     REFERENCE(DATEFROM) TYPE  RSDATEFROM OPTIONAL
    *"     REFERENCE(RECNO) TYPE  SYTABIX OPTIONAL
    *"  TABLES
    *"      ZZ STRUCTURE  /BIC/AZZ00
    *"      MONITOR STRUCTURE  RSMONITOR OPTIONAL
    *"      MONITOR_RECNO STRUCTURE  RSMONITORS OPTIONAL
      CLEAR ZZ.
      ZZ-chrt_accts   = chrt_accts.
      ZZ-account      = account.
      ZZ-co_area      = co_area.
      ZZ-/bic/zpc = zpc.
      ZZ-datefrom     = datefrom.
      ZZ-dateto       = dateto.
      REFRESH ZZ.
      PERFORM z1000_read_ZZ TABLES ZZ
                                 USING  get_first_entry.
    return values found in table or raise exception
      IF  ZZ[] IS INITIAL
      AND key_must_be_found = 'X'.
        PERFORM z1000_set_return_message
                          TABLES monitor
                          USING msgty 'YFI_MIR' '013'
                          'ZZ'    chrt_accts
                            account co_area.
        PERFORM z9999_return_message_recno
                          TABLES monitor_recno
                          USING msgty 'YFI_MIR' '013'
                          'ZZ    chrt_accts
                            account co_area
                            recno.
      ENDIF.
    ENDFUNCTION.
    =========================================
    In our case there are 2 records in the table ZZ, of which the FM should pick the latest record but it is picking the old record.
    Can anyone please check where the error is and any correction I have to make inorder to rectify the error.
    I suppose we need to change in the following line
    PERFORM z1000_read_ZZ TABLES ZZ
                                 USING  get_first_entry.
    Regards,
    Bhadri M.

    You can sort the ZZ table records based on your logic by which you want to have the latest record.

Maybe you are looking for